Skip to contentSkip to conversation

commit: Make base read-only if there is an early failure

PATCH Superseded Alberto Garcia 2 participants 6 messages Apr 11, 2019 – Apr 26, 2019 Block layer

v2 of 3 Superseded Latest is v3 →

lore
Share & tools
lore
#1 lore raw

PATCH v2 1/2 commit: Make base read-only if there is an early failure

In reply to Alberto Garcia

You can reproduce this by passing an invalid filter-node-name (like "1234") to block-commit. In this case the base image is put in read-write mode but is never reset back to read-only.

---
 block/commit.c | 3 +++
 1 file changed, 3 insertions(+)
block/commit.c +3 -0
index ba60fef58a..698eda1dfe 100644
@@ -384,6 +384,9 @@ fail:
     if (s->top) {
         blk_unref(s->top);
     }
+    if (s->base_read_only) {
+        bdrv_reopen_set_read_only(base, true, NULL);
+    }
     job_early_fail(&s->common.job);
     /* commit_top_bs has to be replaced after deleting the block job,
      * otherwise this would fail because of lack of permissions. */
Signature · 1 line
2.11.0
#0 lore raw

v2 cover commit: Make base read-only if there is an early failure

Hi,

this is the same patch I posted yesterday, but with a test case.

Berto

Alberto Garcia (2):
commit: Make base read-only if there is an early failure
iotests: Check that images are in read-only mode after block-commit

 block/commit.c             |   3 ++
 tests/qemu-iotests/249     | 115 +++++++++++++++++++++++++++++++++++++++++++++
 tests/qemu-iotests/249.out |  35 ++++++++++++++
 tests/qemu-iotests/group   |   1 +
 4 files changed, 154 insertions(+)
 create mode 100755 tests/qemu-iotests/249
 create mode 100644 tests/qemu-iotests/249.out
Signature · 1 line
2.11.0
#3 lore raw

PATCH v2 2/2 iotests: Check that images are in read-only mode after block-commit

This tests the fix from the previous patch.

---
 tests/qemu-iotests/249     | 115 +++++++++++++++++++++++++++++++++++++++++++++
 tests/qemu-iotests/249.out |  35 ++++++++++++++
 tests/qemu-iotests/group   |   1 +
 3 files changed, 151 insertions(+)
 create mode 100755 tests/qemu-iotests/249
 create mode 100644 tests/qemu-iotests/249.out
tests/qemu-iotests/249 new file +115 -0
new file mode 100755
index 0000000000..a6ee2ef492
@@ -0,0 +1,115 @@
+#!/usr/bin/env bash
+#
+# Test that a backing image is put back in read-only mode after
+# block-commit (both when it fails and when it succeeds).
+#
+# Copyright (C) 2019 Igalia, S.L.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+
+# creator
[email protected]
+
+seq=`basename $0`
+echo "QA output created by $seq"
+
+here=`pwd`
+status=1	# failure is the default!
+
+_cleanup()
+{
+    _cleanup_test_img
+    rm -f "$TEST_IMG.base"
+    rm -f "$TEST_IMG.int"
+}
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+# get standard environment, filters and checks
+. ./common.rc
+. ./common.filter
+. ./common.qemu
+
+# Any format implementing BlockDriver.bdrv_change_backing_file
+_supported_fmt qcow2 qed
+_supported_proto file
+_supported_os Linux
+
+IMG_SIZE=1M
+
+# Create the images: base <- int <- active
+TEST_IMG="$TEST_IMG.base" _make_test_img $IMG_SIZE | _filter_imgfmt
+TEST_IMG="$TEST_IMG.int" _make_test_img -b "$TEST_IMG.base" | _filter_imgfmt
+_make_test_img -b "$TEST_IMG.int" | _filter_imgfmt
+
+# Launch QEMU with these two drives:
+# none0: base (read-only)
+# none1: base <- int <- active
+_launch_qemu -drive if=none,file="${TEST_IMG}.base",node-name=base,read-only=on \
+             -drive if=none,file="${TEST_IMG}",backing.node-name=int,backing.backing=base
+
+_send_qemu_cmd $QEMU_HANDLE \
+    "{ 'execute': 'qmp_capabilities' }" \
+    'return'
+
+echo
+echo '=== Send a write command to a drive opened in read-only mode (1)'
+echo
+_send_qemu_cmd $QEMU_HANDLE \
+    "{ 'execute': 'human-monitor-command',
+       'arguments': {'command-line': 'qemu-io none0 \"aio_write 0 2k\"'}}" \
+    'return'
+
+echo
+echo '=== Run block-commit on base using an invalid filter node name'
+echo
+_send_qemu_cmd $QEMU_HANDLE \
+    "{ 'execute': 'block-commit',
+       'arguments': {'job-id': 'job0', 'device': 'none1', 'top-node': 'int',
+                     'filter-node-name': '1234'}}" \
+    'error'
+
+echo
+echo '=== Send a write command to a drive opened in read-only mode (2)'
+echo
+_send_qemu_cmd $QEMU_HANDLE \
+    "{ 'execute': 'human-monitor-command',
+       'arguments': {'command-line': 'qemu-io none0 \"aio_write 0 2k\"'}}" \
+    'return'
+
+echo
+echo '=== Run block-commit on base using the default filter node name'
+echo
+_send_qemu_cmd $QEMU_HANDLE \
+    "{ 'execute': 'block-commit',
+       'arguments': {'job-id': 'job0', 'device': 'none1', 'top-node': 'int'}}" \
+    'return'
+
+# Wait for block-commit to finish
+sleep 0.5
+
+echo
+echo '=== Send a write command to a drive opened in read-only mode (3)'
+echo
+_send_qemu_cmd $QEMU_HANDLE \
+    "{ 'execute': 'human-monitor-command',
+       'arguments': {'command-line': 'qemu-io none0 \"aio_write 0 2k\"'}}" \
+    'return'
+
+_cleanup_qemu
+
+# success, all done
+echo "*** done"
+rm -f $seq.full
+status=0
tests/qemu-iotests/249.out new file +35 -0
new file mode 100644
index 0000000000..dfb960c1af
@@ -0,0 +1,35 @@
+QA output created by 249
+Formatting 'TEST_DIR/t.IMGFMT.base', fmt=IMGFMT size=1048576
+Formatting 'TEST_DIR/t.IMGFMT.int', fmt=IMGFMT size=1048576 backing_file=TEST_DIR/t.IMGFMT.base
+Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=1048576 backing_file=TEST_DIR/t.IMGFMT.int
+{"return": {}}
+
+=== Send a write command to a drive opened in read-only mode (1)
+
+{"return": "Block node is read-onlyrn"}
+
+=== Run block-commit on base using an invalid filter node name
+
+{"timestamp": {"seconds":  TIMESTAMP, "microseconds":  TIMESTAMP}, "event": "JOB_STATUS_CHANGE", "data": {"status": "created", "id": "job0"}}
+{"timestamp": {"seconds":  TIMESTAMP, "microseconds":  TIMESTAMP}, "event": "JOB_STATUS_CHANGE", "data": {"status": "null", "id": "job0"}}
+{"error": {"class": "GenericError", "desc": "Invalid node name"}}
+
+=== Send a write command to a drive opened in read-only mode (2)
+
+{"return": "Block node is read-onlyrn"}
+
+=== Run block-commit on base using the default filter node name
+
+{"timestamp": {"seconds":  TIMESTAMP, "microseconds":  TIMESTAMP}, "event": "JOB_STATUS_CHANGE", "data": {"status": "created", "id": "job0"}}
+{"timestamp": {"seconds":  TIMESTAMP, "microseconds":  TIMESTAMP}, "event": "JOB_STATUS_CHANGE", "data": {"status": "running", "id": "job0"}}
+{"return": {}}
+
+=== Send a write command to a drive opened in read-only mode (3)
+
+{"timestamp": {"seconds":  TIMESTAMP, "microseconds":  TIMESTAMP}, "event": "JOB_STATUS_CHANGE", "data": {"status": "waiting", "id": "job0"}}
+{"timestamp": {"seconds":  TIMESTAMP, "microseconds":  TIMESTAMP}, "event": "JOB_STATUS_CHANGE", "data": {"status": "pending", "id": "job0"}}
+{"timestamp": {"seconds":  TIMESTAMP, "microseconds":  TIMESTAMP}, "event": "BLOCK_JOB_COMPLETED", "data": {"device": "job0", "len": 1048576, "offset": 1048576, "speed": 0, "type": "commit"}}
+{"timestamp": {"seconds":  TIMESTAMP, "microseconds":  TIMESTAMP}, "event": "JOB_STATUS_CHANGE", "data": {"status": "concluded", "id": "job0"}}
+{"timestamp": {"seconds":  TIMESTAMP, "microseconds":  TIMESTAMP}, "event": "JOB_STATUS_CHANGE", "data": {"status": "null", "id": "job0"}}
+{"return": "Block node is read-onlyrn"}
+*** done
tests/qemu-iotests/group +1 -0
index bae7718380..7ac9a5ea4a 100644
@@ -248,3 +248,4 @@
 246 rw auto quick
 247 rw auto quick
 248 rw auto quick
+249 rw auto quick
Signature · 1 line
2.11.0
#5 lore raw
In reply to Alberto Garcia

ping

Quoted 20 lines · Alberto Garcia

Hi,

this is the same patch I posted yesterday, but with a test case.

Berto

Alberto Garcia (2):
commit: Make base read-only if there is an early failure
iotests: Check that images are in read-only mode after block-commit

 block/commit.c             |   3 ++
 tests/qemu-iotests/249     | 115 +++++++++++++++++++++++++++++++++++++++++++++
 tests/qemu-iotests/249.out |  35 ++++++++++++++
 tests/qemu-iotests/group   |   1 +
 4 files changed, 154 insertions(+)
 create mode 100755 tests/qemu-iotests/249
 create mode 100644 tests/qemu-iotests/249.out
Signature · 1 line
2.11.0
#4 lore raw

Re: [Qemu-devel] [PATCH for-4.1 v2 2/2] iotests: Check that images are in read-only mode after block-commit

In reply to Alberto Garcia
Quoted 32 lines · Alberto Garcia

This tests the fix from the previous patch.

---
 tests/qemu-iotests/249     | 115 +++++++++++++++++++++++++++++++++++++++++++++
 tests/qemu-iotests/249.out |  35 ++++++++++++++
 tests/qemu-iotests/group   |   1 +
 3 files changed, 151 insertions(+)
 create mode 100755 tests/qemu-iotests/249
 create mode 100644 tests/qemu-iotests/249.out
tests/qemu-iotests/249 new file +15 -0
new file mode 100755
index 0000000000..a6ee2ef492
@@ -0,0 +1,115 @@
+#!/usr/bin/env bash
+#
+# Test that a backing image is put back in read-only mode after
+# block-commit (both when it fails and when it succeeds).
+#
+# Copyright (C) 2019 Igalia, S.L.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

tests/qemu-iotests/249 line 25

Quoted 10 lines
tests/qemu-iotests/249 new file +10 -0
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+
+# creator
[email protected]
+
+seq=`basename $0`

I have been berated for not using $() here...

tests/qemu-iotests/249 line 28

Quoted 3 lines
tests/qemu-iotests/249 new file +3 -0
+echo "QA output created by $seq"
+
+here=`pwd`

...and including this line here, so I suppose I'll pass that criticism along. O:-)

Otherwise, the test looks good to me, just one thing...

[...]

tests/qemu-iotests/249 line 100

Quoted 10 lines
tests/qemu-iotests/249 new file +10 -0
+echo
+echo '=== Run block-commit on base using the default filter node name'
+echo
+_send_qemu_cmd $QEMU_HANDLE \
+    "{ 'execute': 'block-commit',
+       'arguments': {'job-id': 'job0', 'device': 'none1', 'top-node': 'int'}}" \
+    'return'
+
+# Wait for block-commit to finish
+sleep 0.5

Why not just

_send_qemu_cmd $QEMU_HANDLE '' \
    '"status": "null"'

?

First, that would avoid timing issues. Second, this places all the job logs above the "=== Send a write command [...] (3)" line.

Max

Quoted 3 lines
tests/qemu-iotests/249 new file +3 -0
+echo
+echo '=== Send a write command to a drive opened in read-only mode (3)'
+echo