ARM: clearfog: add run-time board detect
Subsystems (3)
v2 cover ARM: clearfog: add run-time board detect
Newer revisions of SolidRun Clearfog Base/Pro carriers and Armada 388 SOM add EEPROM storage for board detection. This patch series adds support for reading EEPROM stored board information, and using it to set RAM training parameters, serdes configuration, and kernel DT selection.
The information is stored in EEPROM in TLV format defined for the ONIE project.
https://opencomputeproject.github.io/onie/design-spec/hw_requirements.html
This series add the sys_eeprom command from ONIE carried U-Boot patch, with a number for changes as described in the patch log. The TLV format is unchanged.
This series also adds support for the newly introduced single board, Aramda 385 based Clearfog GTR system. RAM configuration on that system requires both Armada 38x DDR clocks to be enabled. The first patch in this series adds the necessary code to allow per-board selection of DDR clock.
Changes in v2:
* Fix checkpatch issues in TLV EEPROM code
* Make TLV EEPROM API independent of static storage for compatibility with pre-relocation code
* Rename sys_eeprom to less generic tlv_eeprom throughout the code
* Drop typedefs
* Move board level TLV parse code to the common/ sub-directory for easier reuse in other SolidRun platforms
* Integrate fixes from Joel Johnson: add missing u-boot/crc.h include; select SPL_DRIVERS_MISC_SUPPORT; fix build with CMD_TLV_EEPROM unset
* Add review tags from Stefan Roese
Baruch Siach (10):
ddr: marvell: a38x: allow board specific clock out setup
arm: mvebu: clearfog: enable both DDR clocks
cmd: add tlv_eeprom command
ARM: mvebu: clearfog: add EEPROM devices
ARM: mvebu: clearfog: add support for EEPROM TLV info
ARM: mvebu: clearfog: read basic TLV data
ARM: mvebu: clearfog: print TLV stored product name
ARM: mvebu: clearfog: run-time selection of DT file
ARM: mvebu: clearfog: add Clearfog GTR support
ARM: mvebu: clearfog: add Clearfog Base serdes configuration
arch/arm/dts/armada-388-clearfog-u-boot.dtsi | 12 + arch/arm/dts/armada-388-clearfog.dts | 6 + .../arm/dts/armada-38x-solidrun-microsom.dtsi | 8 + arch/arm/mach-mvebu/Kconfig | 1 + board/solidrun/clearfog/clearfog.c | 72 +- board/solidrun/common/Makefile | 5 + board/solidrun/common/tlv_data.c | 102 ++ board/solidrun/common/tlv_data.h | 18 + cmd/Kconfig | 14 + cmd/Makefile | 2 + cmd/tlv_eeprom.c | 1105 +++++++++++++++++ configs/clearfog_defconfig | 4 + drivers/ddr/marvell/a38x/ddr3_training.c | 10 +- drivers/ddr/marvell/a38x/ddr_topology_def.h | 3 + include/tlv_eeprom.h | 164 +++ 15 files changed, 1522 insertions(+), 4 deletions(-) create mode 100644 board/solidrun/common/Makefile create mode 100644 board/solidrun/common/tlv_data.c create mode 100644 board/solidrun/common/tlv_data.h create mode 100644 cmd/tlv_eeprom.c create mode 100644 include/tlv_eeprom.h
Signature · 1 line
2.24.1
PATCH v2 1/10 ddr: marvell: a38x: allow board specific clock out setup
DDR clock out might be unrelated to the number of active chip-select. For example, the board might have two DDR components, but only one chip-select. The clk_enable mask allows the board to enable DDR clocks regardless of active chip-selects.
--- drivers/ddr/marvell/a38x/ddr3_training.c | 10 ++++++++-- drivers/ddr/marvell/a38x/ddr_topology_def.h | 3 +++ 2 files changed, 11 insertions(+), 2 deletions(-)
drivers/ddr/marvell/a38x/ddr3_training.c +8 -2
@@ -280,8 +280,14 @@ int ddr3_tip_configure_cs(u32 dev_num, u32 if_id, u32 cs_num, u32 enable) {u32 data, addr_hi, data_high;u32 mem_index; +u32 clk_enable;struct mv_ddr_topology_map *tm =mv_ddr_topology_map_get (); +if (tm->clk_enable & (1 << cs_num)) + clk_enable =1 ; +else + clk_enable = enable; +if (enable ==1 ) { data = (tm->interface_params[if_id].bus_width ==MV_DDR_DEV_WIDTH_8BIT ) ?0 :1 ;
@@ -316,13 +322,13 @@ int ddr3_tip_configure_cs(u32 dev_num, u32 if_id, u32 cs_num, u32 enable)case 2 :CHECK_STATUS (ddr3_tip_if_write (dev_num,ACCESS_TYPE_UNICAST , if_id, -DUNIT_CTRL_LOW_REG , (enable << (cs_num +11 )), +DUNIT_CTRL_LOW_REG , (clk_enable << (cs_num +11 )),1 << (cs_num +11 )));break ;case 3 :CHECK_STATUS (ddr3_tip_if_write (dev_num,ACCESS_TYPE_UNICAST , if_id, -DUNIT_CTRL_LOW_REG , (enable <<15 ),1 <<15 )); +DUNIT_CTRL_LOW_REG , (clk_enable <<15 ),1 <<15 ));break ; }
drivers/ddr/marvell/a38x/ddr_topology_def.h +3 -0
@@ -124,6 +124,9 @@ struct mv_ddr_topology_map {/* electrical parameters */ unsigned int electrical_data[MV_DDR_EDATA_LAST ]; + +/* Clock enable mask */ +u32 clk_enable; };enum mv_ddr_iface_mode {
Signature · 1 line
2.24.1
PATCH v2 2/10 arm: mvebu: clearfog: enable both DDR clocks
In reply to Baruch SiachEnabled both DDR clock signals to support Clearfog variants (currently, Clearfog GTR) that need both clocks.
--- board/solidrun/clearfog/clearfog.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)
board/solidrun/clearfog/clearfog.c +4 -1
@@ -68,7 +68,10 @@ static struct mv_ddr_topology_map board_topology_map = {BUS_MASK_32BIT ,/* Busses mask */ MV_DDR_CFG_DEFAULT ,/* ddr configuration data source */ { {0} }, /* raw spd data */ - {0} /* timing parameters */ + {0}, /* timing parameters */ + { {0} }, /* electrical configuration */ + {0,}, /* electrical parameters */ + 0x3, /* clock enable mask */ };struct mv_ddr_topology_map *mv_ddr_topology_map_get (void )
Signature · 1 line
2.24.1
PATCH v2 3/10 cmd: add tlv_eeprom command
In reply to Baruch SiachAdd support for read/write of ONIE "Tlvinfo" EEPROM data format. TLV stands for Type-Length-Value. The data format is described here:
Based on U-Boot patch from the Open Compute project:
Keep only I2C EEPROM support. Use the generic eeprom driver. Fix checkpatch issues.
Add support for multiple EEPROM TLV stores on the same system. This is useful in case of SOM and carrier that both provide ID and hardware configuration information.
Add option to enable for SPL. This allows selection of RAM configuration based on EEPROM stored board identification.
--- cmd/Kconfig | 14 + cmd/Makefile | 2 + cmd/tlv_eeprom.c | 1105 ++++++++++++++++++++++++++++++++++++++++++ include/tlv_eeprom.h | 164 +++++++ 4 files changed, 1285 insertions(+) create mode 100644 cmd/tlv_eeprom.c create mode 100644 include/tlv_eeprom.h
cmd/Kconfig +14 -0
@@ -242,6 +242,20 @@ config CMD_REGINFO help Register dump +config CMD_TLV_EEPROM + bool "tlv_eeprom" + depends on I2C_EEPROM + help + Display and program the system EEPROM data block in ONIE Tlvinfo + format. TLV stands for Type-Length-Value. + +config SPL_CMD_TLV_EEPROM + bool "tlv_eeprom for SPL" + depends on SPL_I2C_EEPROM + select SPL_DRIVERS_MISC_SUPPORT + help + Read system EEPROM data block in ONIE Tlvinfo format from SPL. + endmenu menu "Boot commands"
cmd/Makefile +2 -0
@@ -184,6 +184,8 @@ obj-$(CONFIG_X86) += x86/ obj-$(CONFIG_ARCH_MVEBU) += mvebu/ endif # !CONFIG_SPL_BUILD +obj-$(CONFIG_$(SPL_)CMD_TLV_EEPROM) += tlv_eeprom.o + # core command obj-y += nvedit.o
cmd/tlv_eeprom.c new file +1105 -0
1,105 lines not on this page · raw message
include/tlv_eeprom.h new file +164 -0
164 lines not on this page · raw message
Signature · 1 line
2.24.1
PATCH v2 4/10 ARM: mvebu: clearfog: add EEPROM devices
In reply to Baruch SiachAdd device-tree description for the EEPROM devices on Armada 388 SOM rev 2.1.
Another EEPROM is now on Clearfog Pro carrier rev 2.2, and Clearfog Base rev 1.3.
--- arch/arm/dts/armada-388-clearfog-u-boot.dtsi | 12 ++++++++++++ arch/arm/dts/armada-388-clearfog.dts | 6 ++++++ arch/arm/dts/armada-38x-solidrun-microsom.dtsi | 8 ++++++++ 3 files changed, 26 insertions(+)
arch/arm/dts/armada-388-clearfog-u-boot.dtsi +12 -0
@@ -24,3 +24,15 @@ &ahci1 { u-boot,dm-spl; }; + +&i2c0 { + u-boot,dm-spl; + + eeprom at 52 { + u-boot,dm-spl; + }; + + eeprom at 53 { + u-boot,dm-spl; + }; +};
arch/arm/dts/armada-388-clearfog.dts +6 -0
@@ -259,6 +259,12 @@ compatible = "microchip,mcp3021"; reg = <0x4c>; }; + + eeprom at 52 { + compatible = "atmel,24c02"; + reg = <0x52>; + pagesize = <16>; + }; }; &i2c1 {
arch/arm/dts/armada-38x-solidrun-microsom.dtsi +8 -0
@@ -99,3 +99,11 @@ status = "okay"; u-boot,dm-pre-reloc; }; + +&i2c0 { + eeprom at 53 { + compatible = "atmel,24c02"; + reg = <0x53>; + pagesize = <16>; + }; +};
Signature · 1 line
2.24.1
PATCH v2 5/10 ARM: mvebu: clearfog: add support for EEPROM TLV info
In reply to Baruch Siach--- configs/clearfog_defconfig | 4 ++++ 1 file changed, 4 insertions(+)
configs/clearfog_defconfig +4 -0
@@ -28,6 +28,8 @@ CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_DATA_PART_OFFSET=0x1 CONFIG_SPL_I2C_SUPPORT=y +CONFIG_CMD_TLV_EEPROM=y +CONFIG_SPL_CMD_TLV_EEPROM=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y
@@ -49,6 +51,8 @@ CONFIG_DM_GPIO=y CONFIG_DM_PCA953X=y CONFIG_DM_I2C=y CONFIG_SYS_I2C_MVTWSI=y +CONFIG_I2C_EEPROM=y +CONFIG_SPL_I2C_EEPROM=y CONFIG_DM_MMC=y CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_MMC_SDHCI=y
Signature · 1 line
2.24.1
PATCH v2 6/10 ARM: mvebu: clearfog: read basic TLV data
In reply to Baruch SiachRead RAM die capacity from the EEPROM TLV.
Follow the ONIE standard that defines the Vendor Extension entry type for vendor specific data. We have no Private Enterprise Number at the moment as the standard requires. Use the dummy all 0xff value for now.
--- board/solidrun/clearfog/clearfog.c | 28 ++++++++ board/solidrun/common/Makefile | 5 ++ board/solidrun/common/tlv_data.c | 102 +++++++++++++++++++++++++++++ board/solidrun/common/tlv_data.h | 18 +++++ 4 files changed, 153 insertions(+) create mode 100644 board/solidrun/common/Makefile create mode 100644 board/solidrun/common/tlv_data.c create mode 100644 board/solidrun/common/tlv_data.h
board/solidrun/clearfog/clearfog.c +28 -0
@@ -10,6 +10,7 @@#include <asm/io.h> #include <asm/arch/cpu.h> #include <asm/arch/soc.h> +#include "../common/tlv_data.h" #include "../drivers/ddr/marvell/a38x/ddr3_init.h" #include <../serdes/a38x/high_speed_env_spec.h>
@@ -28,6 +29,19 @@ DECLARE_GLOBAL_DATA_PTR;#define BOARD_GPP_POL_LOW 0x0#define BOARD_GPP_POL_MID 0x0 +static struct tlv_data cf_tlv_data; + +static void cf_read_tlv_data (void ) +{ +static bool read_once; + +if (read_once) +return ; + read_once = true; + +read_tlv_data (&cf_tlv_data); +} +static struct serdes_map board_serdes_map[] = { {SATA0 ,SERDES_SPEED_3_GBPS ,SERDES_DEFAULT_MODE ,0 ,0 }, {SGMII1 ,SERDES_SPEED_1_25_GBPS ,SERDES_DEFAULT_MODE ,0 ,0 },
@@ -76,6 +90,20 @@ static struct mv_ddr_topology_map board_topology_map = {struct mv_ddr_topology_map *mv_ddr_topology_map_get (void ) { +struct if_params *ifp = &board_topology_map.interface_params[0 ]; + +cf_read_tlv_data (); + +switch (cf_tlv_data.ram_size) { +case 4 : +default : + ifp->memory_size =MV_DDR_DIE_CAP_4GBIT ; +break ; +case 8 : + ifp->memory_size =MV_DDR_DIE_CAP_8GBIT ; +break ; + } +/* Return the board topology as defined in the board code */ return &board_topology_map; }
board/solidrun/common/Makefile new file +5 -0
@@ -0,0 +1,5 @@ +# SPDX-License-Identifier: GPL-2.0+ +# +# Copyright (C) SolidRun + +obj-$(CONFIG_TARGET_CLEARFOG) += tlv_data.o
board/solidrun/common/tlv_data.c new file +102 -0
102 lines not on this page · raw message
board/solidrun/common/tlv_data.h new file +18 -0
@@ -0,0 +1,18 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* +* Copyright 2020 SolidRun +*/ + +#ifndef __BOARD_SR_COMMON_H_ +#define __BOARD_SR_COMMON_H_ + +struct tlv_data { +/* Store product name of both SOM and carrier */ +char tlv_product_name[2 ][32 ]; +unsigned int ram_size; +}; + +void read_tlv_data (struct tlv_data *td); +bool sr_product_is (const struct tlv_data *td,const char *product); + +#endif /* __BOARD_SR_COMMON_H_ */
Signature · 1 line
2.24.1
PATCH v2 7/10 ARM: mvebu: clearfog: print TLV stored product name
In reply to Baruch SiachUse the data from EEPROM TLV to display the board identity.
--- board/solidrun/clearfog/clearfog.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-)
board/solidrun/clearfog/clearfog.c +10 -1
@@ -156,7 +156,16 @@ int board_init(void)int checkboard (void ) { -puts ("Board: SolidRun ClearFog\n" ); +char *board ="ClearFog" ; + +cf_read_tlv_data (); +if (strlen (cf_tlv_data.tlv_product_name[0 ]) >0 ) + board = cf_tlv_data.tlv_product_name[0 ]; + +printf ("Board: SolidRun %s" , board); +if (strlen (cf_tlv_data.tlv_product_name[1 ]) >0 ) +printf (", %s" , cf_tlv_data.tlv_product_name[1 ]); +puts ("\n" );return 0 ; }
Signature · 1 line
2.24.1
PATCH v2 8/10 ARM: mvebu: clearfog: run-time selection of DT file
In reply to Baruch SiachSet the kernel device-tree file (fdtfile environment variable) based on run-time detection of the platform.
--- arch/arm/mach-mvebu/Kconfig | 1 + board/solidrun/clearfog/clearfog.c | 14 ++++++++++++++ 2 files changed, 15 insertions(+)
arch/arm/mach-mvebu/Kconfig +1 -0
@@ -91,6 +91,7 @@ choice config TARGET_CLEARFOG bool "Support ClearFog" select 88F6820 + select BOARD_LATE_INIT config TARGET_HELIOS4 bool "Support Helios4"
board/solidrun/clearfog/clearfog.c +14 -0
@@ -175,3 +175,17 @@ int board_eth_init(bd_t *bis)cpu_eth_init (bis);/* Built in controller(s) come first */ return pci_eth_init (bis); } + +int board_late_init (void ) +{ +cf_read_tlv_data (); + +if (sr_product_is (&cf_tlv_data,"Clearfog Base" )) +env_set ("fdtfile" ,"armada-388-clearfog-base.dtb" ); +else if (sr_product_is (&cf_tlv_data,"Clearfog GTR S4" )) +env_set ("fdtfile" ,"armada-385-clearfog-gtr-s4.dtb" ); +else if (sr_product_is (&cf_tlv_data,"Clearfog GTR L8" )) +env_set ("fdtfile" ,"armada-385-clearfog-gtr-l8.dtb" ); + +return 0 ; +}
Signature · 1 line
2.24.1
PATCH v2 9/10 ARM: mvebu: clearfog: add Clearfog GTR support
In reply to Baruch SiachSelect the serdes configuration table based on the platform identity read from EEPROM TLV data. Clearfog GTR needs a slightly different serdes configuration.
--- board/solidrun/clearfog/clearfog.c | 8 ++++++++ 1 file changed, 8 insertions(+)
board/solidrun/clearfog/clearfog.c +8 -0
@@ -53,6 +53,14 @@ static struct serdes_map board_serdes_map[] = {int hws_board_topology_load (struct serdes_map **serdes_map_array,u8 *count) { +cf_read_tlv_data (); + +if (sr_product_is (&cf_tlv_data,"Clearfog GTR" )) { + board_serdes_map[0 ].serdes_type =PEX0 ; + board_serdes_map[0 ].serdes_speed =SERDES_SPEED_5_GBPS ; + board_serdes_map[0 ].serdes_mode =PEX_ROOT_COMPLEX_X1 ; + } + *serdes_map_array = board_serdes_map; *count =ARRAY_SIZE (board_serdes_map);return 0 ;
Signature · 1 line
2.24.1
PATCH v2 10/10 ARM: mvebu: clearfog: add Clearfog Base serdes configuration
In reply to Baruch SiachClearfog Base carrier uses serdes lane #5 as USB host. Use EEPROM stored device identification to configure the serdes accordingly when available.
--- board/solidrun/clearfog/clearfog.c | 6 ++++++ 1 file changed, 6 insertions(+)
board/solidrun/clearfog/clearfog.c +6 -0
@@ -61,6 +61,12 @@ int hws_board_topology_load(struct serdes_map **serdes_map_array, u8 *count) board_serdes_map[0 ].serdes_mode =PEX_ROOT_COMPLEX_X1 ; } +if (sr_product_is (&cf_tlv_data,"Clearfog Base" )) { + board_serdes_map[4 ].serdes_type =USB3_HOST0 ; + board_serdes_map[4 ].serdes_speed =SERDES_SPEED_5_GBPS ; + board_serdes_map[4 ].serdes_mode =SERDES_DEFAULT_MODE ; + } + *serdes_map_array = board_serdes_map; *count =ARRAY_SIZE (board_serdes_map);return 0 ;
Signature · 1 line
2.24.1
PATCH v2 3/10 cmd: add tlv_eeprom command
In reply to Baruch SiachQuoted 20 lines · Baruch Siach
Add support for read/write of ONIE "Tlvinfo" EEPROM data format. TLV stands for Type-Length-Value. The data format is described here:
Based on U-Boot patch from the Open Compute project:
https://github.com/opencomputeproject/onie/blob/ec87e872d46b9805565d2c6124b2f701ef1c07b1/patches/u-boot/common/feature-sys-eeprom-tlv-common.patchKeep only I2C EEPROM support. Use the generic eeprom driver. Fix checkpatch issues.
Add support for multiple EEPROM TLV stores on the same system. This is useful in case of SOM and carrier that both provide ID and hardware configuration information.
Add option to enable for SPL. This allows selection of RAM configuration based on EEPROM stored board identification.
Signed-off-by Baruch Siach <[email protected]>
Quoted 8 lines
--- cmd/Kconfig | 14 + cmd/Makefile | 2 + cmd/tlv_eeprom.c | 1105 ++++++++++++++++++++++++++++++++++++++++++ include/tlv_eeprom.h | 164 +++++++ 4 files changed, 1285 insertions(+)create mode 100644
cmd/tlv_eeprom.c
create mode 100644include/tlv_eeprom.h
Thanks,
Stefan
PATCH v2 5/10 ARM: mvebu: clearfog: add support for EEPROM TLV info
In reply to Baruch SiachQuoted 20 lines · Baruch Siach
Signed-off-by Baruch Siach <[email protected]>--- configs/clearfog_defconfig | 4 ++++ 1 file changed, 4 insertions(+)configs/clearfog_defconfig +2
-0@@ -28,6 +28,8 @@ CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_DATA_PART_OFFSET=0x1 CONFIG_SPL_I2C_SUPPORT=y +CONFIG_CMD_TLV_EEPROM=y +CONFIG_SPL_CMD_TLV_EEPROM=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y
configs/clearfog_defconfig CONFIG_DM_GPIO=y · line 58
Quoted 8 lines
configs/clearfog_defconfig +2
-0@@ -49,6 +51,8 @@ CONFIG_DM_GPIO=y CONFIG_DM_PCA953X=y CONFIG_DM_I2C=y CONFIG_SYS_I2C_MVTWSI=y +CONFIG_I2C_EEPROM=y +CONFIG_SPL_I2C_EEPROM=y CONFIG_DM_MMC=y CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_MMC_SDHCI=y
Thanks,
Stefan
PATCH v2 6/10 ARM: mvebu: clearfog: read basic TLV data
In reply to Baruch SiachQuoted 7 lines · Baruch Siach
Read RAM die capacity from the EEPROM TLV.
Follow the ONIE standard that defines the Vendor Extension entry type for vendor specific data. We have no Private Enterprise Number at the moment as the standard requires. Use the dummy all
0xffvalue for now.Signed-off-by Baruch Siach <[email protected]>
Thanks,
Stefan
v2 cover ARM: clearfog: add run-time board detect
In reply to Baruch SiachQuoted 36 lines · Baruch Siach
Newer revisions of SolidRun Clearfog Base/Pro carriers and Armada 388 SOM add EEPROM storage for board detection. This patch series adds support for reading EEPROM stored board information, and using it to set RAM training parameters, serdes configuration, and kernel DT selection.
The information is stored in EEPROM in TLV format defined for the ONIE project.
https://opencomputeproject.github.io/onie/design-spec/hw_requirements.html
This series add the
sys_eepromcommand from ONIE carried U-Boot patch, with a number for changes as described in the patch log. The TLV format is unchanged.This series also adds support for the newly introduced single board, Aramda 385 based Clearfog GTR system. RAM configuration on that system requires both Armada 38x DDR clocks to be enabled. The first patch in this series adds the necessary code to allow per-board selection of DDR clock.
Changes in v2:
* Fix checkpatch issues in TLV EEPROM code
* Make TLV EEPROM API independent of static storage for compatibility with pre-relocation code
* Rename
sys_eepromto less generictlv_eepromthroughout the code* Drop typedefs
* Move board level TLV parse code to the common/ sub-directory for easier reuse in other SolidRun platforms
* Integrate fixes from Joel Johnson: add missing
u-boot/crc.hinclude; selectSPL_DRIVERS_MISC_SUPPORT; fix build withCMD_TLV_EEPROMunset* Add review tags from Stefan Roese
Quoted 11 lines
Baruch Siach (10):
ddr: marvell: a38x: allow board specific clock out setup
arm: mvebu: clearfog: enable both DDR clocks
cmd: addtlv_eepromcommand
ARM: mvebu: clearfog: add EEPROM devices
ARM: mvebu: clearfog: add support for EEPROM TLV info
ARM: mvebu: clearfog: read basic TLV data
ARM: mvebu: clearfog: print TLV stored product name
ARM: mvebu: clearfog: run-time selection of DT file
ARM: mvebu: clearfog: add Clearfog GTR support
ARM: mvebu: clearfog: add Clearfog Base serdes configuration
Complete series:
Applied to u-boot-marvell/master
Thanks,
Stefan