Skip to contentSkip to conversation

gpio: add driver for Mellanox BlueField 2 GPIO controller

PATCH In review Asmaa Mnebhi 2 participants 4 messages Mar 2, 2020 – Mar 9, 2020 GPIO

lore
Share & tools
lore
#0 lore raw

v4 cover gpio: add driver for Mellanox BlueField 2 GPIO controller

This patch adds support for the GPIO controller used by Mellanox BlueFIeld 2 SOCs.
This patch addresses the following issues:
1) Make mlxbf2_gpio_lock_acquire and mlxbf2_gpio_lock_release symmetrical
2) renamed mlxbf2_gpio_state to mlxbf2_gpio_context
3) removed unnecessary informational message.

Asmaa Mnebhi (1):
gpio: add driver for Mellanox BlueField 2 GPIO controller

 drivers/gpio/Kconfig       |   7 +
 drivers/gpio/Makefile      |   1 +
 drivers/gpio/gpio-mlxbf2.c | 335 +++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 343 insertions(+)
 create mode 100644 drivers/gpio/gpio-mlxbf2.c
Signature · 1 line
2.1.2
#1 lore raw

PATCH v4 1/1 gpio: add driver for Mellanox BlueField 2 GPIO controller

This patch adds support for the GPIO controller used by Mellanox BlueField 2 SOCs.

---
 drivers/gpio/Kconfig       |   7 +
 drivers/gpio/Makefile      |   1 +
 drivers/gpio/gpio-mlxbf2.c | 335 +++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 343 insertions(+)
 create mode 100644 drivers/gpio/gpio-mlxbf2.c
drivers/gpio/Kconfig +7 -0
index b8013cf..6234ccc 100644
@@ -1399,6 +1399,13 @@ config GPIO_MLXBF
 	help
 	  Say Y here if you want GPIO support on Mellanox BlueField SoC.
 
+config GPIO_MLXBF2
+	tristate "Mellanox BlueField 2 SoC GPIO"
+	depends on (MELLANOX_PLATFORM && ARM64 && ACPI) || (64BIT && COMPILE_TEST)
+	select GPIO_GENERIC
+	help
+	  Say Y here if you want GPIO support on Mellanox BlueField 2 SoC.
+
 config GPIO_ML_IOH
 	tristate "OKI SEMICONDUCTOR ML7213 IOH GPIO support"
 	depends on X86 || COMPILE_TEST
drivers/gpio/Makefile +1 -0
index 0b57126..b2cfc21 100644
@@ -93,6 +93,7 @@ obj-$(CONFIG_GPIO_MENZ127)		+= gpio-menz127.o
 obj-$(CONFIG_GPIO_MERRIFIELD)		+= gpio-merrifield.o
 obj-$(CONFIG_GPIO_ML_IOH)		+= gpio-ml-ioh.o
 obj-$(CONFIG_GPIO_MLXBF)		+= gpio-mlxbf.o
+obj-$(CONFIG_GPIO_MLXBF2)		+= gpio-mlxbf2.o
 obj-$(CONFIG_GPIO_MM_LANTIQ)		+= gpio-mm-lantiq.o
 obj-$(CONFIG_GPIO_MOCKUP)		+= gpio-mockup.o
 obj-$(CONFIG_GPIO_MOXTET)		+= gpio-moxtet.o
drivers/gpio/gpio-mlxbf2.c new file +335 -0

335 lines not on this page · raw message

Signature · 1 line
2.1.2
#3 lore raw

Thanks Linus! 😊

-----Original Message-----
From: Linus Walleij <[email protected]>
Sent: Monday, March 9, 2020 4:49 AM
To: Asmaa Mnebhi <[email protected]>
Cc: Bartosz Golaszewski <[email protected]>; [email protected]
Subject: Re: [PATCH v4 1/1] gpio: add driver for Mellanox BlueField 2 GPIO controller

Quoted 4 lines · Asmaa Mnebhi

This patch adds support for the GPIO controller used by Mellanox BlueField 2 SOCs.

This is now a very nice driver!

Patch applied.

Yours,
Linus Walleij