Skip to contentSkip to conversation

More sm501 fixes and optimisations

PATCH Superseded BALATON Zoltan 3 participants 14 messages Jun 16, 2020 – Jun 19, 2020

v2 of 3 Superseded Latest is v3 →

lore
Share & tools
lore
#0 lore raw

v2 cover More sm501 fixes and optimisations

Version 2 with changes according to review by Peter plus some new patches added. Still need to verify overlap checks so likely will be another version but sending it now if additional comments come up.

Regards,
BALATON Zoltan

BALATON Zoltan (8):
sm501: Fix bounds checks
sm501: Drop unneded variable
sm501: Ignore no-op blits
sm501: Introduce variable for commonly used value for better
readability
sm501: Optimise 1 pixel 2d ops
sm501: Use stn_he_p/ldn_he_p instead of switch/case
sm501: Do not allow guest to set invalid format
sm501: Convert debug printfs to traces

 hw/display/sm501.c      | 133 ++++++++++++++++++----------------------
 hw/display/trace-events |  12 ++++
 2 files changed, 72 insertions(+), 73 deletions(-)
Signature · 1 line
2.21.3
#4 lore raw

PATCH v2 4/8 sm501: Introduce variable for commonly used value for better readability

The bytes per pixel value can be calculated from format but it's used freqently enough (and will be used more in subseqent patches) so store it in a variable for better readabilty. Also drop some unneded 0x prefix around where new variable is defined.

---
 hw/display/sm501.c | 41 +++++++++++++++++++++--------------------
 1 file changed, 21 insertions(+), 20 deletions(-)
hw/display/sm501.c +21 -20
index 3397ca9fbf..282574adec 100644
@@ -684,10 +684,11 @@ static void sm501_2d_operation(SM501State *s)
 {
     int cmd = (s->twoD_control >> 16) & 0x1F;
     int rtl = s->twoD_control & BIT(27);
-    int format = (s->twoD_stretch >> 20) & 0x3;
-    int rop_mode = (s->twoD_control >> 15) & 0x1; /* 1 for rop2, else rop3 */
+    int format = (s->twoD_stretch >> 20) & 3;
+    int bypp = 1 << format; /* bytes per pixel */
+    int rop_mode = (s->twoD_control >> 15) & 1; /* 1 for rop2, else rop3 */
     /* 1 if rop2 source is the pattern, otherwise the source is the bitmap */
-    int rop2_source_is_pattern = (s->twoD_control >> 14) & 0x1;
+    int rop2_source_is_pattern = (s->twoD_control >> 14) & 1;
     int rop = s->twoD_control & 0xFF;
     unsigned int dst_x = (s->twoD_destination >> 16) & 0x01FFF;
     unsigned int dst_y = s->twoD_destination & 0xFFFF;
@@ -724,8 +725,8 @@ static void sm501_2d_operation(SM501State *s)
     }
 
     if (dst_base >= get_local_mem_size(s) ||
-        dst_base + (dst_x + width + (dst_y + height) * dst_pitch) *
-        (1 << format) >= get_local_mem_size(s)) {
+        dst_base + (dst_x + width + (dst_y + height) * dst_pitch) * bypp >=
+        get_local_mem_size(s)) {
         qemu_log_mask(LOG_GUEST_ERROR, "sm501: 2D op dest is outside vram.\n");
         return;
     }
@@ -750,8 +751,8 @@ static void sm501_2d_operation(SM501State *s)
         }
 
         if (src_base >= get_local_mem_size(s) ||
-            src_base + (src_x + width + (src_y + height) * src_pitch) *
-            (1 << format) >= get_local_mem_size(s)) {
+            src_base + (src_x + width + (src_y + height) * src_pitch) * bypp >=
+            get_local_mem_size(s)) {
             qemu_log_mask(LOG_GUEST_ERROR,
                           "sm501: 2D op src is outside vram.\n");
             return;
@@ -763,8 +764,8 @@ static void sm501_2d_operation(SM501State *s)
             uint8_t *d = s->local_mem + dst_base;
 
             for (y = 0; y < height; y++) {
-                i = (dst_x + (dst_y + y) * dst_pitch) * (1 << format);
-                for (x = 0; x < width; x++, i += (1 << format)) {
+                i = (dst_x + (dst_y + y) * dst_pitch) * bypp;
+                for (x = 0; x < width; x++, i += bypp) {
                     switch (format) {
                     case 0:
                         d[i] = ~d[i];
@@ -801,7 +802,7 @@ static void sm501_2d_operation(SM501State *s)
             de = db + width + height * (width + dst_pitch);
             if (rtl && ((db >= sb && db <= se) || (de >= sb && de <= se))) {
                 /* regions may overlap: copy via temporary */
-                int llb = width * (1 << format);
+                int llb = width * bypp;
                 int tmp_stride = DIV_ROUND_UP(llb, sizeof(uint32_t));
                 uint32_t *tmp = tmp_buf;
 
@@ -809,13 +810,13 @@ static void sm501_2d_operation(SM501State *s)
                     tmp = g_malloc(tmp_stride * sizeof(uint32_t) * height);
                 }
                 pixman_blt((uint32_t *)&s->local_mem[src_base], tmp,
-                           src_pitch * (1 << format) / sizeof(uint32_t),
-                           tmp_stride, 8 * (1 << format), 8 * (1 << format),
+                           src_pitch * bypp / sizeof(uint32_t),
+                           tmp_stride, 8 * bypp, 8 * bypp,
                            src_x, src_y, 0, 0, width, height);
                 pixman_blt(tmp, (uint32_t *)&s->local_mem[dst_base],
                            tmp_stride,
-                           dst_pitch * (1 << format) / sizeof(uint32_t),
-                           8 * (1 << format), 8 * (1 << format),
+                           dst_pitch * bypp / sizeof(uint32_t),
+                           8 * bypp, 8 * bypp,
                            0, 0, dst_x, dst_y, width, height);
                 if (tmp != tmp_buf) {
                     g_free(tmp);
@@ -823,9 +824,9 @@ static void sm501_2d_operation(SM501State *s)
             } else {
                 pixman_blt((uint32_t *)&s->local_mem[src_base],
                            (uint32_t *)&s->local_mem[dst_base],
-                           src_pitch * (1 << format) / sizeof(uint32_t),
-                           dst_pitch * (1 << format) / sizeof(uint32_t),
-                           8 * (1 << format), 8 * (1 << format),
+                           src_pitch * bypp / sizeof(uint32_t),
+                           dst_pitch * bypp / sizeof(uint32_t),
+                           8 * bypp, 8 * bypp,
                            src_x, src_y, dst_x, dst_y, width, height);
             }
         }
@@ -842,8 +843,8 @@ static void sm501_2d_operation(SM501State *s)
         }
 
         pixman_fill((uint32_t *)&s->local_mem[dst_base],
-                    dst_pitch * (1 << format) / sizeof(uint32_t),
-                    8 * (1 << format), dst_x, dst_y, width, height, color);
+                    dst_pitch * bypp / sizeof(uint32_t),
+                    8 * bypp, dst_x, dst_y, width, height, color);
         break;
     }
     default:
@@ -855,7 +856,7 @@ static void sm501_2d_operation(SM501State *s)
     if (dst_base >= get_fb_addr(s, crt) &&
         dst_base <= get_fb_addr(s, crt) + fb_len) {
         int dst_len = MIN(fb_len, ((dst_y + height - 1) * dst_pitch +
-                          dst_x + width) * (1 << format));
+                          dst_x + width) * bypp);
         if (dst_len) {
             memory_region_set_dirty(&s->local_mem_region, dst_base, dst_len);
         }
Signature · 1 line
2.21.3
#6 lore raw

PATCH v2 5/8 sm501: Optimise 1 pixel 2d ops

In reply to BALATON Zoltan

Some guests do 1x1 blits which is faster to do directly than calling a function for it so avoid overhead in this case.

---
 hw/display/sm501.c | 19 ++++++++++++++++---
 1 file changed, 16 insertions(+), 3 deletions(-)
hw/display/sm501.c +16 -3
index 282574adec..b6356ea1ee 100644
@@ -794,6 +794,14 @@ static void sm501_2d_operation(SM501State *s)
                 src_x == dst_x && src_y == dst_y) {
                 break;
             }
+            /* Some clients also do 1 pixel blits, avoid overhead for these */
+            if (width == 1 && height == 1) {
+                unsigned int si = (src_x + src_y * src_pitch) * bypp;
+                unsigned int di = (dst_x + dst_y * dst_pitch) * bypp;
+                stn_he_p(&s->local_mem[dst_base + di], bypp,
+                         ldn_he_p(&s->local_mem[src_base + si], bypp));
+                break;
+            }
             /* Check for overlaps, this could be made more exact */
             uint32_t sb, se, db, de;
             sb = src_base + src_x + src_y * (width + src_pitch);
@@ -842,9 +850,14 @@ static void sm501_2d_operation(SM501State *s)
             color = cpu_to_le16(color);
         }
 
-        pixman_fill((uint32_t *)&s->local_mem[dst_base],
-                    dst_pitch * bypp / sizeof(uint32_t),
-                    8 * bypp, dst_x, dst_y, width, height, color);
+        if (width == 1 && height == 1) {
+            unsigned int i = (dst_x + dst_y * dst_pitch) * bypp;
+            stn_he_p(&s->local_mem[dst_base + i], bypp, color);
+        } else {
+            pixman_fill((uint32_t *)&s->local_mem[dst_base],
+                        dst_pitch * bypp / sizeof(uint32_t),
+                        8 * bypp, dst_x, dst_y, width, height, color);
+        }
         break;
     }
     default:
Signature · 1 line
2.21.3
#10 lore raw

PATCH v2 7/8 sm501: Do not allow guest to set invalid format

In reply to BALATON Zoltan

Prevent guest setting invalid format value that might trip checks in sm501_2d_operation().

---
 hw/display/sm501.c | 3 +++
 1 file changed, 3 insertions(+)
hw/display/sm501.c +3 -0
index 6e914d3162..583a0ff6b5 100644
@@ -1503,6 +1503,9 @@ static void sm501_2d_engine_write(void *opaque, hwaddr addr,
         s->twoD_background = value;
         break;
     case SM501_2D_STRETCH:
+        if (((value >> 20) & 3) == 3) {
+            value &= ~BIT(20);
+        }
         s->twoD_stretch = value;
         break;
     case SM501_2D_COLOR_COMPARE:
Signature · 1 line
2.21.3
#1 lore raw

PATCH v2 1/8 sm501: Fix bounds checks

In reply to BALATON Zoltan

We don't need to add width to pitch when calculating last point, that would reject valid ops within the card's local_mem.

Fixes b15a22bbcbe6a78dc3d88fe3134985e4cdd87de4
---
 hw/display/sm501.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
hw/display/sm501.c +4 -4
index edd8d24a76..5ae320ddc3 100644
@@ -723,8 +723,8 @@ static void sm501_2d_operation(SM501State *s)
         dst_y -= height - 1;
     }
 
-    if (dst_base >= get_local_mem_size(s) || dst_base +
-        (dst_x + width + (dst_y + height) * (dst_pitch + width)) *
+    if (dst_base >= get_local_mem_size(s) ||
+        dst_base + (dst_x + width + (dst_y + height) * dst_pitch) *
         (1 << format) >= get_local_mem_size(s)) {
         qemu_log_mask(LOG_GUEST_ERROR, "sm501: 2D op dest is outside vram.\n");
         return;
@@ -749,8 +749,8 @@ static void sm501_2d_operation(SM501State *s)
             src_y -= height - 1;
         }
 
-        if (src_base >= get_local_mem_size(s) || src_base +
-            (src_x + width + (src_y + height) * (src_pitch + width)) *
+        if (src_base >= get_local_mem_size(s) ||
+            src_base + (src_x + width + (src_y + height) * src_pitch) *
             (1 << format) >= get_local_mem_size(s)) {
             qemu_log_mask(LOG_GUEST_ERROR,
                           "sm501: 2D op src is outside vram.\n");
Signature · 1 line
2.21.3
#2 lore raw

PATCH v2 2/8 sm501: Drop unneded variable

In reply to BALATON Zoltan

We don't need a separate variable to keep track if we allocated memory that needs to be freed as we can test the pointer itself.

---
 hw/display/sm501.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)
hw/display/sm501.c +2 -3
index 5ae320ddc3..85d54b598f 100644
@@ -796,13 +796,12 @@ static void sm501_2d_operation(SM501State *s)
             de = db + width + height * (width + dst_pitch);
             if (rtl && ((db >= sb && db <= se) || (de >= sb && de <= se))) {
                 /* regions may overlap: copy via temporary */
-                int free_buf = 0, llb = width * (1 << format);
+                int llb = width * (1 << format);
                 int tmp_stride = DIV_ROUND_UP(llb, sizeof(uint32_t));
                 uint32_t *tmp = tmp_buf;
 
                 if (tmp_stride * sizeof(uint32_t) * height > sizeof(tmp_buf)) {
                     tmp = g_malloc(tmp_stride * sizeof(uint32_t) * height);
-                    free_buf = 1;
                 }
                 pixman_blt((uint32_t *)&s->local_mem[src_base], tmp,
                            src_pitch * (1 << format) / sizeof(uint32_t),
@@ -813,7 +812,7 @@ static void sm501_2d_operation(SM501State *s)
                            dst_pitch * (1 << format) / sizeof(uint32_t),
                            8 * (1 << format), 8 * (1 << format),
                            0, 0, dst_x, dst_y, width, height);
-                if (free_buf) {
+                if (tmp != tmp_buf) {
                     g_free(tmp);
                 }
             } else {
Signature · 1 line
2.21.3
#8 lore raw

PATCH v2 6/8 sm501: Use stn_he_p/ldn_he_p instead of switch/case

In reply to BALATON Zoltan

Instead of open coding op with different sizes using a switch and type casting it can be written more compactly using stn_he_p/ldn_he_p.

---
 hw/display/sm501.c | 12 +-----------
 1 file changed, 1 insertion(+), 11 deletions(-)
hw/display/sm501.c +1 -11
index b6356ea1ee..6e914d3162 100644
@@ -766,17 +766,7 @@ static void sm501_2d_operation(SM501State *s)
             for (y = 0; y < height; y++) {
                 i = (dst_x + (dst_y + y) * dst_pitch) * bypp;
                 for (x = 0; x < width; x++, i += bypp) {
-                    switch (format) {
-                    case 0:
-                        d[i] = ~d[i];
-                        break;
-                    case 1:
-                        *(uint16_t *)&d[i] = ~*(uint16_t *)&d[i];
-                        break;
-                    case 2:
-                        *(uint32_t *)&d[i] = ~*(uint32_t *)&d[i];
-                        break;
-                    }
+                    stn_he_p(&d[i], bypp, ~ldn_he_p(&d[i], bypp));
                 }
             }
         } else {
Signature · 1 line
2.21.3
#3 lore raw

PATCH v2 3/8 sm501: Ignore no-op blits

In reply to BALATON Zoltan

Some guests seem to try source copy blits with same source and dest which are no-op so avoid calling pixman for these.

---
 hw/display/sm501.c | 5 +++++
 1 file changed, 5 insertions(+)
hw/display/sm501.c +5 -0
index 85d54b598f..3397ca9fbf 100644
@@ -788,6 +788,11 @@ static void sm501_2d_operation(SM501State *s)
                               (rop2_source_is_pattern ?
                                   " with pattern source" : ""));
             }
+            /* Ignore no-op blits, some guests seem to do this */
+            if (src_base == dst_base && src_pitch == dst_pitch &&
+                src_x == dst_x && src_y == dst_y) {
+                break;
+            }
             /* Check for overlaps, this could be made more exact */
             uint32_t sb, se, db, de;
             sb = src_base + src_x + src_y * (width + src_pitch);
Signature · 1 line
2.21.3
#12 lore raw

PATCH v2 8/8 sm501: Convert debug printfs to traces

In reply to BALATON Zoltan
---
 hw/display/sm501.c      | 50 +++++++++++------------------------------
 hw/display/trace-events | 12 ++++++++++
 2 files changed, 25 insertions(+), 37 deletions(-)
hw/display/sm501.c +13 -37
index 583a0ff6b5..abe75f21dc 100644
@@ -39,15 +39,7 @@
 #include "qemu/range.h"
 #include "ui/pixel_ops.h"
 #include "qemu/bswap.h"
-
-/*#define DEBUG_SM501*/
-/*#define DEBUG_BITBLT*/
-
-#ifdef DEBUG_SM501
-#define SM501_DPRINTF(fmt, ...) printf(fmt, ## __VA_ARGS__)
-#else
-#define SM501_DPRINTF(fmt, ...) do {} while (0)
-#endif
+#include "trace.h"
 
 #define MMIO_BASE_OFFSET 0x3e00000
 #define MMIO_SIZE 0x200000
@@ -871,7 +863,6 @@ static uint64_t sm501_system_config_read(void *opaque, hwaddr addr,
 {
     SM501State *s = (SM501State *)opaque;
     uint32_t ret = 0;
-    SM501_DPRINTF("sm501 system config regs : read addr=%x\n", (int)addr);
 
     switch (addr) {
     case SM501_SYSTEM_CONTROL:
@@ -923,7 +914,7 @@ static uint64_t sm501_system_config_read(void *opaque, hwaddr addr,
         qemu_log_mask(LOG_UNIMP, "sm501: not implemented system config"
                       "register read. addr=%" HWADDR_PRIx "\n", addr);
     }
-
+    trace_sm501_system_config_read(addr, ret);
     return ret;
 }
 
@@ -931,9 +922,8 @@ static void sm501_system_config_write(void *opaque, hwaddr addr,
                                       uint64_t value, unsigned size)
 {
     SM501State *s = (SM501State *)opaque;
-    SM501_DPRINTF("sm501 system config regs : write addr=%x, val=%x\n",
-                  (uint32_t)addr, (uint32_t)value);
 
+    trace_sm501_system_config_write((uint32_t)addr, (uint32_t)value);
     switch (addr) {
     case SM501_SYSTEM_CONTROL:
         s->system_control &= 0x10DB0000;
@@ -1019,9 +1009,7 @@ static uint64_t sm501_i2c_read(void *opaque, hwaddr addr, unsigned size)
         qemu_log_mask(LOG_UNIMP, "sm501 i2c : not implemented register read."
                       " addr=0x%" HWADDR_PRIx "\n", addr);
     }
-
-    SM501_DPRINTF("sm501 i2c regs : read addr=%" HWADDR_PRIx " val=%x\n",
-                  addr, ret);
+    trace_sm501_i2c_read((uint32_t)addr, ret);
     return ret;
 }
 
@@ -1029,9 +1017,8 @@ static void sm501_i2c_write(void *opaque, hwaddr addr, uint64_t value,
                             unsigned size)
 {
     SM501State *s = (SM501State *)opaque;
-    SM501_DPRINTF("sm501 i2c regs : write addr=%" HWADDR_PRIx
-                  " val=%" PRIx64 "\n", addr, value);
 
+    trace_sm501_i2c_write((uint32_t)addr, (uint32_t)value);
     switch (addr) {
     case SM501_I2C_BYTE_COUNT:
         s->i2c_byte_count = value & 0xf;
@@ -1045,25 +1032,19 @@ static void sm501_i2c_write(void *opaque, hwaddr addr, uint64_t value,
                 s->i2c_status |= (res ? SM501_I2C_STATUS_ERROR : 0);
                 if (!res) {
                     int i;
-                    SM501_DPRINTF("sm501 i2c : transferring %d bytes to 0x%x\n",
-                                  s->i2c_byte_count + 1, s->i2c_addr >> 1);
                     for (i = 0; i <= s->i2c_byte_count; i++) {
                         res = i2c_send_recv(s->i2c_bus, &s->i2c_data[i],
                                             !(s->i2c_addr & 1));
                         if (res) {
-                            SM501_DPRINTF("sm501 i2c : transfer failed"
-                                          " i=%d, res=%d\n", i, res);
                             s->i2c_status |= SM501_I2C_STATUS_ERROR;
                             return;
                         }
                     }
                     if (i) {
-                        SM501_DPRINTF("sm501 i2c : transferred %d bytes\n", i);
                         s->i2c_status = SM501_I2C_STATUS_COMPLETE;
                     }
                 }
             } else {
-                SM501_DPRINTF("sm501 i2c : end transfer\n");
                 i2c_end_transfer(s->i2c_bus);
                 s->i2c_status &= ~SM501_I2C_STATUS_ERROR;
             }
@@ -1103,7 +1084,8 @@ static const MemoryRegionOps sm501_i2c_ops = {
 static uint32_t sm501_palette_read(void *opaque, hwaddr addr)
 {
     SM501State *s = (SM501State *)opaque;
-    SM501_DPRINTF("sm501 palette read addr=%x\n", (int)addr);
+
+    trace_sm501_palette_read((uint32_t)addr);
 
     /* TODO : consider BYTE/WORD access */
     /* TODO : consider endian */
@@ -1116,8 +1098,8 @@ static void sm501_palette_write(void *opaque, hwaddr addr,
                                 uint32_t value)
 {
     SM501State *s = (SM501State *)opaque;
-    SM501_DPRINTF("sm501 palette write addr=%x, val=%x\n",
-                  (int)addr, value);
+
+    trace_sm501_palette_write((uint32_t)addr, value);
 
     /* TODO : consider BYTE/WORD access */
     /* TODO : consider endian */
@@ -1132,7 +1114,6 @@ static uint64_t sm501_disp_ctrl_read(void *opaque, hwaddr addr,
 {
     SM501State *s = (SM501State *)opaque;
     uint32_t ret = 0;
-    SM501_DPRINTF("sm501 disp ctrl regs : read addr=%x\n", (int)addr);
 
     switch (addr) {
 
@@ -1237,7 +1218,7 @@ static uint64_t sm501_disp_ctrl_read(void *opaque, hwaddr addr,
         qemu_log_mask(LOG_UNIMP, "sm501: not implemented disp ctrl register "
                       "read. addr=%" HWADDR_PRIx "\n", addr);
     }
-
+    trace_sm501_disp_ctrl_read((uint32_t)addr, ret);
     return ret;
 }
 
@@ -1245,9 +1226,8 @@ static void sm501_disp_ctrl_write(void *opaque, hwaddr addr,
                                   uint64_t value, unsigned size)
 {
     SM501State *s = (SM501State *)opaque;
-    SM501_DPRINTF("sm501 disp ctrl regs : write addr=%x, val=%x\n",
-                  (unsigned)addr, (unsigned)value);
 
+    trace_sm501_disp_ctrl_write((uint32_t)addr, (uint32_t)value);
     switch (addr) {
     case SM501_DC_PANEL_CONTROL:
         s->dc_panel_control = value & 0x0FFF73FF;
@@ -1392,7 +1372,6 @@ static uint64_t sm501_2d_engine_read(void *opaque, hwaddr addr,
 {
     SM501State *s = (SM501State *)opaque;
     uint32_t ret = 0;
-    SM501_DPRINTF("sm501 2d engine regs : read addr=%x\n", (int)addr);
 
     switch (addr) {
     case SM501_2D_SOURCE:
@@ -1462,7 +1441,7 @@ static uint64_t sm501_2d_engine_read(void *opaque, hwaddr addr,
         qemu_log_mask(LOG_UNIMP, "sm501: not implemented disp ctrl register "
                       "read. addr=%" HWADDR_PRIx "\n", addr);
     }
-
+    trace_sm501_2d_engine_read((uint32_t)addr, ret);
     return ret;
 }
 
@@ -1470,9 +1449,8 @@ static void sm501_2d_engine_write(void *opaque, hwaddr addr,
                                   uint64_t value, unsigned size)
 {
     SM501State *s = (SM501State *)opaque;
-    SM501_DPRINTF("sm501 2d engine regs : write addr=%x, val=%x\n",
-                  (unsigned)addr, (unsigned)value);
 
+    trace_sm501_2d_engine_write((uint32_t)addr, (uint32_t)value);
     switch (addr) {
     case SM501_2D_SOURCE:
         s->twoD_source = value;
@@ -1830,8 +1808,6 @@ static void sm501_init(SM501State *s, DeviceState *dev,
                        uint32_t local_mem_bytes)
 {
     s->local_mem_size_index = get_local_mem_size_index(local_mem_bytes);
-    SM501_DPRINTF("sm501 local mem size=%x. index=%d\n", get_local_mem_size(s),
-                  s->local_mem_size_index);
 
     /* local memory */
     memory_region_init_ram(&s->local_mem_region, OBJECT(dev), "sm501.local",
hw/display/trace-events +12 -0
index 72d4c9812c..970d6bac5d 100644
@@ -161,3 +161,15 @@ cg3_write(uint32_t addr, uint32_t val, unsigned size) "write addr:0x%06"PRIx32"
 # dpcd.c
 dpcd_read(uint32_t addr, uint8_t val) "read addr:0x%"PRIx32" val:0x%02x"
 dpcd_write(uint32_t addr, uint8_t val) "write addr:0x%"PRIx32" val:0x%02x"
+
+# sm501.c
+sm501_system_config_read(uint32_t addr, uint32_t val) "addr=0x%x, val=0x%x"
+sm501_system_config_write(uint32_t addr, uint32_t val) "addr=0x%x, val=0x%x"
+sm501_i2c_read(uint32_t addr, uint8_t val) "addr=0x%x, val=0x%x"
+sm501_i2c_write(uint32_t addr, uint32_t val) "addr=0x%x, val=0x%x"
+sm501_palette_read(uint32_t addr) "addr=0x%x"
+sm501_palette_write(uint32_t addr, uint32_t val) "addr=0x%x, val=0x%x"
+sm501_disp_ctrl_read(uint32_t addr, uint32_t val) "addr=0x%x, val=0x%x"
+sm501_disp_ctrl_write(uint32_t addr, uint32_t val) "addr=0x%x, val=0x%x"
+sm501_2d_engine_read(uint32_t addr, uint32_t val) "addr=0x%x, val=0x%x"
+sm501_2d_engine_write(uint32_t addr, uint32_t val) "addr=0x%x, val=0x%x"
Signature · 1 line
2.21.3
Reviewed-by on v2 7/8
#11 lore raw

Re: [PATCH v2 7/8] sm501: Do not allow guest to set invalid format

In reply to BALATON Zoltan
Quoted 14 lines · BALATON Zoltan

Prevent guest setting invalid format value that might trip checks in sm501_2d_operation().

---
 hw/display/sm501.c | 3 +++
 1 file changed, 3 insertions(+)
hw/display/sm501.c +0 -0
index 6e914d3162..583a0ff6b5 100644

hw/display/sm501.c static void sm501_2d_engine_write(void *opaque, hwaddr addr,

Quoted 10 lines
hw/display/sm501.c +3 -1
@@ -1503,6 +1503,9 @@ static void sm501_2d_engine_write(void *opaque, hwaddr addr,
         s->twoD_background = value;
         break;
     case SM501_2D_STRETCH:
+        if (((value >> 20) & 3) == 3) {
+            value &= ~BIT(20);
+        }
         s->twoD_stretch = value;
         break;
     case SM501_2D_COLOR_COMPARE:
--

thanks
-- PMM

Reviewed-by on v2 4/8
#5 lore raw

Re: [PATCH v2 4/8] sm501: Introduce variable for commonly used value for better readability

In reply to BALATON Zoltan
Quoted 7 lines · BALATON Zoltan

The bytes per pixel value can be calculated from format but it's used freqently enough (and will be used more in subseqent patches) so store it in a variable for better readabilty. Also drop some unneded 0x prefix around where new variable is defined.

thanks
-- PMM

Reviewed-by on v2 5/8
#7 lore raw

Re: [PATCH v2 5/8] sm501: Optimise 1 pixel 2d ops

In reply to BALATON Zoltan
Quoted 9 lines · BALATON Zoltan

Some guests do 1x1 blits which is faster to do directly than calling a function for it so avoid overhead in this case.

---
 hw/display/sm501.c | 19 ++++++++++++++++---
 1 file changed, 16 insertions(+), 3 deletions(-)

thanks
-- PMM

Reviewed-by on v2 6/8
#9 lore raw

Re: [PATCH v2 6/8] sm501: Use stn_he_p/ldn_he_p instead of switch/case

In reply to BALATON Zoltan
Quoted 23 lines · BALATON Zoltan

Instead of open coding op with different sizes using a switch and type casting it can be written more compactly using stn_he_p/ldn_he_p.

---
 hw/display/sm501.c | 12 +-----------
 1 file changed, 1 insertion(+), 11 deletions(-)
hw/display/sm501.c +0 -5
index b6356ea1ee..6e914d3162 100644
@@ -766,17 +766,7 @@ static void sm501_2d_operation(SM501State *s)
             for (y = 0; y < height; y++) {
                 i = (dst_x + (dst_y + y) * dst_pitch) * bypp;
                 for (x = 0; x < width; x++, i += bypp) {
-                    switch (format) {
-                    case 0:
-                        d[i] = ~d[i];
-                        break;
-                    case 1:

hw/display/sm501.c static void sm501_2d_operation(SM501State *s) · line 772

Quoted 10 lines
hw/display/sm501.c +1 -6
-                        *(uint16_t *)&d[i] = ~*(uint16_t *)&d[i];
-                        break;
-                    case 2:
-                        *(uint32_t *)&d[i] = ~*(uint32_t *)&d[i];
-                        break;
-                    }
+                    stn_he_p(&d[i], bypp, ~ldn_he_p(&d[i], bypp));
                 }
             }
         } else {