qga: add command guest-get-disk
v2 cover qga: add command guest-get-disk
Adds command to list disks of the VM.
The patch does compile on master but to work properly it requires changes to qemu-ga by Thomas Huth in series: Allow guest-get-fsinfo also for non-PCI devices.
v2:
- added new struct in API to handle the information
- split changes into several patches
- for Linux list also slaves, partitions and virtual disks so that the disk hierarchy is preserved
- fixed issues pointed out by Michael
Tomáš Golembiovský (3):
qga: add command guest-get-disks
qga: add implementation of guest-get-disks for Linux
qga: add implementation of guest-get-disks for Windows
qga/commands-posix.c | 241 ++++++++++++++++++++++++++++++++++++++++++- qga/commands-win32.c | 91 ++++++++++++++++ qga/qapi-schema.json | 29 ++++++ 3 files changed, 360 insertions(+), 1 deletion(-)
Signature · 1 line
2.25.0
PATCH v2 3/3 qga: add implementation of guest-get-disks for Windows
The command lists all the physical disk drives. Unlike for Linux partitions and virtual volumes are not listed.
Example output:
{
"return": [
{
"name": "\\\\.\\PhysicalDrive0",
"partition": false,
"address": {
"serial": "QM00001",
"bus-type": "sata",
...
},
"slaves": []
} ]
}
--- qga/commands-win32.c | 97 +++++++++++++++++++++++++++++++++++++++++--- 1 file changed, 91 insertions(+), 6 deletions(-)
qga/commands-win32.c +91 -6
@@ -945,6 +945,91 @@ out:return list; } +GuestDiskInfoList *qmp_guest_get_disks (Error **errp) +{ +GuestDiskInfoList *new =NULL , *ret =NULL ; +HDEVINFO dev_info; +SP_DEVICE_INTERFACE_DATA dev_iface_data; +int i; + + dev_info =SetupDiGetClassDevs (&GUID_DEVINTERFACE_DISK ,0 ,0 , +DIGCF_PRESENT |DIGCF_DEVICEINTERFACE ); +if (dev_info ==INVALID_HANDLE_VALUE ) { +error_setg_win32 (errp,GetLastError (),"failed to get device tree" ); +return NULL ; + } + +g_debug ("enumerating devices" ); + dev_iface_data.cbSize =sizeof (SP_DEVICE_INTERFACE_DATA ); +for (i =0 ; +SetupDiEnumDeviceInterfaces (dev_info,NULL , &GUID_DEVINTERFACE_DISK , + i, &dev_iface_data); + i++) { +GuestDiskAddress *address =NULL ; +GuestDiskInfo *disk =NULL ; +Error *local_err =NULL ; + g_autofree PSP_DEVICE_INTERFACE_DETAIL_DATA + pdev_iface_detail_data =NULL ; +STORAGE_DEVICE_NUMBER sdn; +HANDLE dev_file; +DWORD size =0 ; + +g_debug (" getting device path" ); +while (!SetupDiGetDeviceInterfaceDetail (dev_info, &dev_iface_data, + pdev_iface_detail_data, + size, &size, +NULL )) { +if (GetLastError () ==ERROR_INSUFFICIENT_BUFFER ) { + pdev_iface_detail_data =g_malloc (size); + pdev_iface_detail_data->cbSize = +sizeof (*pdev_iface_detail_data); + }else { +g_debug ("failed to get device interface details" ); +continue ; + } + } + +g_debug (" device: %s" , pdev_iface_detail_data->DevicePath); + dev_file =CreateFile (pdev_iface_detail_data->DevicePath,0 , +FILE_SHARE_READ ,NULL ,OPEN_EXISTING ,0 ,NULL ); +if (!DeviceIoControl (dev_file,IOCTL_STORAGE_GET_DEVICE_NUMBER , +NULL ,0 , &sdn,sizeof (sdn), &size,NULL )) { +CloseHandle (dev_file); +debug_error ("failed to get storage device number" ); +continue ; + } +CloseHandle (dev_file); + + disk =g_new0 (GuestDiskInfo,1 ); + disk->name =g_strdup_printf ("\\\\.\\PhysicalDrive%lu" , + sdn.DeviceNumber); + +g_debug (" number: %lu" , sdn.DeviceNumber); + address =g_malloc0 (sizeof (GuestDiskAddress)); + address->has_dev = true; + address->dev =g_strdup (disk->name); +get_single_disk_info (sdn.DeviceNumber, address, &local_err); +if (local_err) { +g_debug ("failed to get disk info: %s" , +error_get_pretty (local_err)); +error_free (local_err); +qapi_free_GuestDiskAddress (address); + address =NULL ; + }else { + disk->address = address; + disk->has_address = true; + } + + new =g_malloc0 (sizeof (GuestDiskInfoList)); + new->value = disk; + new->next = ret; + ret = new; + } + +SetupDiDestroyDeviceInfoList (dev_info); +return ret; +} +#else static GuestDiskAddressList *build_guest_disk_info (char *guid,Error **errp)
@@ -952,6 +1037,12 @@ static GuestDiskAddressList *build_guest_disk_info(char *guid, Error **errp) return NULL; } +GuestDiskInfoList *qmp_guest_get_disks (Error **errp) +{ +error_setg (errp,QERR_UNSUPPORTED ); +return NULL ; +} +#endif /* CONFIG_QGA_NTDDSCSI */ static GuestFilesystemInfo *build_guest_fsinfo (char *guid,Error **errp)
@@ -2229,9 +2320,3 @@ GuestOSInfo *qmp_guest_get_osinfo(Error **errp)return info; } - -GuestDiskInfoList *qmp_guest_get_disks (Error **errp) -{ -error_setg (errp,QERR_UNSUPPORTED ); -return NULL ; -}
Signature · 1 line
2.25.0
PATCH v2 1/3 qga: add command guest-get-disks
In reply to Tomáš GolembiovskýAdd API and stubs for new guest-get-disks command.
The command guest-get-fsinfo can be used to list information about disks and partitions but it is limited only to mounted disks with filesystem. This new command should allow listing information about disks of the VM regardles whether they are mounted or not. This can be usefull for management applications for mapping virtualized devices or pass-through devices to device names in the guest OS.
--- qga/commands-posix.c | 6 ++++++ qga/commands-win32.c | 6 ++++++ qga/qapi-schema.json | 29 +++++++++++++++++++++++++++++ 3 files changed, 41 insertions(+)
qga/commands-posix.c +6 -0
@@ -3042,3 +3042,9 @@ GuestOSInfo *qmp_guest_get_osinfo(Error **errp)return info; } + +GuestDiskInfoList *qmp_guest_get_disks (Error **errp) +{ +error_setg (errp,QERR_UNSUPPORTED ); +return NULL ; +}
qga/commands-win32.c +6 -0
@@ -2229,3 +2229,9 @@ GuestOSInfo *qmp_guest_get_osinfo(Error **errp)return info; } + +GuestDiskInfoList *qmp_guest_get_disks (Error **errp) +{ +error_setg (errp,QERR_UNSUPPORTED ); +return NULL ; +}
qga/qapi-schema.json +29 -0
@@ -862,6 +862,35 @@ 'bus': 'int', 'target': 'int', 'unit': 'int', '*serial': 'str', '*dev': 'str'} } +## +# @GuestDiskInfo: +# +# @name: device node (Linux) or device UNC (Windows) +# @partition: whether this is a partition or disk +# @slaves: list of slave devices (Linux) +# @address: disk address information (only for non-virtual devices) +# @alias: optional alias assigned to the disk, on Linux this is a name assigned +# by device mapper +# +# Since 5.2 +## +{ 'struct': 'GuestDiskInfo', + 'data': {'name': 'str', 'partition': 'bool', 'slaves': ['str'], + '*address': 'GuestDiskAddress', '*alias': 'str'} } + +## +# @guest-get-disks: +# +# Returns: The list of disks in the guest. For Windows these are only the +# physical disks. On Linux these are all root block devices of +# non-zero size including e.g. removable devices, loop devices, +# NBD, etc. +# +# Since: 5.2 +## +{ 'command': 'guest-get-disks', + 'returns': ['GuestDiskInfo'] } + ## # @GuestFilesystemInfo: #
Signature · 1 line
2.25.0
PATCH v2 2/3 qga: add implementation of guest-get-disks for Linux
In reply to Tomáš GolembiovskýThe command lists all disks (real and virtual) as well as disk partitions. For each disk the list of slave disks is also listed and /dev path is used as a handle so it can be matched with "name" filed of other returned disk entries. For disk partitions the "slave" list is populated with the the parent device for easier tracking of hierarchy.
Example output:
{
"return": [
...
{
"name": "/dev/dm-0",
"partition": false,
"slaves": [
"/dev/sda2"
],
"alias": "luks-7062202e-5b9b-433e-81e8-6628c40da9f7"
},
{
"name": "/dev/sda2",
"partition": true,
"slaves": [
"/dev/sda"
]
},
{
"name": "/dev/sda",
"partition": false,
"address": {
"serial": "SAMSUNG_MZ7LN512HCHP-000L1_S1ZKNXAG822493",
"bus-type": "sata",
...
"dev": "/dev/sda",
"target": 0
},
"slaves": []
},
... ]
}
--- qga/commands-posix.c | 247 +++++++++++++++++++++++++++++++++++++++++-- 1 file changed, 240 insertions(+), 7 deletions(-)
qga/commands-posix.c +240 -7
@@ -62,6 +62,9 @@ extern char **environ;#endif #endif +G_DEFINE_AUTOPTR_CLEANUP_FUNC (GuestFilesystemInfo, + qapi_free_GuestFilesystemInfo) +static void ga_wait_child (pid_t pid,int *status,Error **errp) {pid_t rpid;
@@ -1150,6 +1153,21 @@ static void build_guest_fsinfo_for_virtual_device(char const *syspath,closedir (dir); } +static bool is_disk_virtual (const char *devpath,Error **errp) +{ + g_autofree char *syspath = realpath(devpath, NULL); + +if (!syspath) { +error_setg_errno (errp, errno,"realpath(\"%s\")" , devpath); +return false; + } +if (strstr (syspath,"/devices/virtual/block/" )) { +return true; + }else { +return false; + } +} +/* Dispatch to functions for virtual/real device */ static void build_guest_fsinfo_for_device(char const *devpath, GuestFilesystemInfo *fs,
@@ -1168,6 +1186,7 @@ static void build_guest_fsinfo_for_device(char const *devpath,g_debug (" parse sysfs path '%s'" , syspath); +/* TODO: use is_disk_virtual() */ if (strstr (syspath,"/devices/virtual/block/" )) {build_guest_fsinfo_for_virtual_device (syspath, fs, errp); }else {
@@ -1177,6 +1196,225 @@ static void build_guest_fsinfo_for_device(char const *devpath,free (syspath); } +#ifdef CONFIG_LIBUDEV + +/* +* Wrapper around build_guest_fsinfo_for_device() for getting just +* the disk address. +*/ +static GuestDiskAddress *get_disk_address (const char *syspath,Error **errp) +{ +g_autoptr (GuestFilesystemInfo) fs =NULL ; + + fs =g_new0 (GuestFilesystemInfo,1 ); +build_guest_fsinfo_for_device (syspath, fs, errp); +if (fs->disk !=NULL ) { +return g_steal_pointer (&fs->disk->value); + } +return NULL ; +} + +static char *get_alias_for_syspath (const char *syspath) +{ +struct udev *udev =NULL ; +struct udev_device *udevice =NULL ; +char *ret =NULL ; + + udev =udev_new (); + udevice =udev_device_new_from_syspath (udev, syspath); +if (udev ==NULL || udevice ==NULL ) { +g_debug ("failed to query udev" ); + }else { +const char *alias =udev_device_get_property_value ( + udevice,"DM_NAME" ); +if (alias !=NULL && *alias !=0 ) { + ret =g_strdup (alias); + } + } + +udev_unref (udev); +udev_device_unref (udevice); +return ret; +} + +static char *get_device_for_syspath (const char *syspath) +{ +struct udev *udev =NULL ; +struct udev_device *udevice =NULL ; +char *ret =NULL ; + + udev =udev_new (); + udevice =udev_device_new_from_syspath (udev, syspath); +if (udev ==NULL || udevice ==NULL ) { +g_debug ("failed to query udev" ); + }else { + ret =g_strdup (udev_device_get_devnode (udevice)); + } +udev_unref (udev); +udev_device_unref (udevice); +return ret; +} + +GuestDiskInfoList *qmp_guest_get_disks (Error **errp) +{ +GuestDiskInfoList *item, *ret =NULL ; +GuestDiskInfo *disk, *partition; +DIR *dp =NULL ; +struct dirent *de =NULL ; + +g_debug ("listing /sys/block directory" ); + dp =opendir ("/sys/block" ); +if (dp ==NULL ) { +error_setg_errno (errp, errno,"Can't open directory \"/sys/block\"" ); +return NULL ; + } +while ((de =readdir (dp)) !=NULL ) { + g_autofree char *disk_dir = NULL, *line = NULL, + *size_dir =NULL , *slaves_dir =NULL ; +struct dirent *de_disk, *de_slaves; +DIR *dp_disk =NULL , *dp_slaves =NULL ; +FILE *fp =NULL ; +size_t n =0 ; +Error *local_err =NULL ; +if (de->d_type !=DT_LNK ) { +g_debug (" skipping entry: %s" , de->d_name); +continue ; + } + +/* Check size and skip zero-sized disks */ +g_debug (" checking disk size" ); + size_dir =g_strdup_printf ("/sys/block/%s/size" , de->d_name); + fp =fopen (size_dir,"r" ); +if (!fp) { +g_debug (" failed to read disk size" ); +continue ; + } +if (getline (&line, &n, fp) ==-1 ) { +g_debug (" failed to read disk size" ); +fclose (fp); +continue ; + } +fclose (fp); +if (strcmp (line,"0\n" ) ==0 ) { +g_debug (" skipping zero-sized disk" ); +continue ; + } + +g_debug (" adding %s" , de->d_name); + disk_dir =g_strdup_printf ("/sys/block/%s" , de->d_name); + disk =g_new0 (GuestDiskInfo,1 ); + disk->name =get_device_for_syspath (disk_dir); + disk->partition = false; + disk->alias =get_alias_for_syspath (disk_dir); +if (disk->alias !=NULL ) { + disk->has_alias = true; + } + item =g_new0 (GuestDiskInfoList,1 ); + item->value = disk; + item->next = ret; + ret = item; + +/* Get address for non-virtual devices */ +bool is_virtual =is_disk_virtual (disk_dir, &local_err); +if (local_err !=NULL ) { +g_debug (" failed to check disk path, ignoring error: %s" , +error_get_pretty (local_err)); +error_free (local_err); + local_err =NULL ; +/* Don't try to get the address */ + is_virtual = true; + } +if (!is_virtual) { + disk->address =get_disk_address (disk_dir, &local_err); +if (local_err !=NULL ) { +g_debug (" failed to get device info, ignoring error: %s" , +error_get_pretty (local_err)); +error_free (local_err); + local_err =NULL ; + }else if (disk->address !=NULL ) { + disk->has_address = true; + } + } + +/* List slave disks */ + slaves_dir =g_strdup_printf ("%s/slaves" , disk_dir); +g_debug (" listing entries in: %s" , slaves_dir); + dp_slaves =opendir (slaves_dir); +while ((de_slaves =readdir (dp_slaves)) !=NULL ) { + g_autofree char *slave_dir = NULL; +char *slave_dev; +strList *slave_item =NULL ; + +if ((strcmp ("." , de_slaves->d_name) ==0 ) || + (strcmp (".." , de_slaves->d_name) ==0 )) { +continue ; + } + +/* Add slave disks */ + slave_dir =g_strdup_printf ("%s/%s" , + slaves_dir, de_slaves->d_name); + slave_dev =get_device_for_syspath (slave_dir); +if (slave_dev !=NULL ) { +g_debug (" adding slave device: %s" , slave_dev); + slave_item =g_new0 (strList,1 ); + slave_item->value = slave_dev; + slave_item->next = disk->slaves; + disk->slaves = slave_item; + } + } +closedir (dp_slaves); + +/* +* Detect partitions subdirectory name is "<parent><number>" or +* "<parent>p<number>" +*/ + dp_disk =opendir (disk_dir); +while ((de_disk =readdir (dp_disk)) !=NULL ) { +size_t len; + g_autofree char *partition_dir = NULL; + +if (!(de_disk->d_type &DT_DIR )) { +continue ; + } + + len =strlen (de->d_name); +if (!(strncmp (de->d_name, de_disk->d_name, len) ==0 && + ((*(de_disk->d_name + len) =='p' && +isdigit (*(de_disk->d_name + len +1 ))) || +isdigit (*(de_disk->d_name + len))))) { +continue ; + } + + partition_dir =g_strdup_printf ("%s/%s" , + disk_dir, de_disk->d_name); + partition =g_new0 (GuestDiskInfo,1 ); + partition->name =get_device_for_syspath (partition_dir); + partition->partition = true; +/* Add parent disk as slave for easier tracking of hierarchy */ + partition->slaves =g_new0 (strList,1 ); + partition->slaves->value =g_strdup (disk->name); + + item =g_new0 (GuestDiskInfoList,1 ); + item->value = partition; + item->next = ret; + ret = item; + + } +closedir (dp_disk); + } +return ret; +} + +#else + +GuestDiskInfoList *qmp_guest_get_disks (Error **errp) +{ +error_setg (errp,QERR_UNSUPPORTED ); +return NULL ; +} + +#endif +/* Return a list of the disk device(s)' info which @mount lies on */ static GuestFilesystemInfo *build_guest_fsinfo (struct FsMount *mount,Error **errp)
@@ -2809,7 +3047,8 @@ GList *ga_command_blacklist_init(GList *blacklist)const char *list[] = {"guest-get-fsinfo" ,"guest-fsfreeze-status" ,"guest-fsfreeze-freeze" ,"guest-fsfreeze-freeze-list" , -"guest-fsfreeze-thaw" ,"guest-get-fsinfo" ,NULL }; +"guest-fsfreeze-thaw" ,"guest-get-fsinfo" , +"guest-get-disks" ,NULL };char **p = (char **)list;while (*p) {
@@ -3042,9 +3281,3 @@ GuestOSInfo *qmp_guest_get_osinfo(Error **errp)return info; } - -GuestDiskInfoList *qmp_guest_get_disks (Error **errp) -{ -error_setg (errp,QERR_UNSUPPORTED ); -return NULL ; -}
Signature · 1 line
2.25.0
Re: [PATCH v2 3/3] qga: add implementation of guest-get-disks for Windows
In reply to Tomáš GolembiovskýCc'ing Yonggang Luo for review.
Quoted 145 lines · Tomáš Golembiovský
The command lists all the physical disk drives. Unlike for Linux partitions and virtual volumes are not listed.
Example output:
{
"return": [{ "name": "\\\\.\\PhysicalDrive0", "partition": false, "address": { "serial": "QM00001", "bus-type": "sata", ... }, "slaves": [] }]
}Signed-off-by Tomáš Golembiovský <[email protected]>--- qga/commands-win32.c | 97 +++++++++++++++++++++++++++++++++++++++++--- 1 file changed, 91 insertions(+), 6 deletions(-)qga/commands-win32.c +91
-6@@ -945,6 +945,91 @@ out:return list; } +GuestDiskInfoList *qmp_guest_get_disks (Error **errp) +{ +GuestDiskInfoList *new =NULL , *ret =NULL ; +HDEVINFO dev_info; +SP_DEVICE_INTERFACE_DATA dev_iface_data; +int i; + + dev_info =SetupDiGetClassDevs (&GUID_DEVINTERFACE_DISK ,0 ,0 , +DIGCF_PRESENT |DIGCF_DEVICEINTERFACE ); +if (dev_info ==INVALID_HANDLE_VALUE ) { +error_setg_win32 (errp,GetLastError (),"failed to get device tree" ); +return NULL ; + } + +g_debug ("enumerating devices" ); + dev_iface_data.cbSize =sizeof (SP_DEVICE_INTERFACE_DATA ); +for (i =0 ; +SetupDiEnumDeviceInterfaces (dev_info,NULL , &GUID_DEVINTERFACE_DISK , + i, &dev_iface_data); + i++) { +GuestDiskAddress *address =NULL ; +GuestDiskInfo *disk =NULL ; +Error *local_err =NULL ; + g_autofree PSP_DEVICE_INTERFACE_DETAIL_DATA + pdev_iface_detail_data =NULL ; +STORAGE_DEVICE_NUMBER sdn; +HANDLE dev_file; +DWORD size =0 ; + +g_debug (" getting device path" ); +while (!SetupDiGetDeviceInterfaceDetail (dev_info, &dev_iface_data, + pdev_iface_detail_data, + size, &size, +NULL )) { +if (GetLastError () ==ERROR_INSUFFICIENT_BUFFER ) { + pdev_iface_detail_data =g_malloc (size); + pdev_iface_detail_data->cbSize = +sizeof (*pdev_iface_detail_data); + }else { +g_debug ("failed to get device interface details" ); +continue ; + } + } + +g_debug (" device: %s" , pdev_iface_detail_data->DevicePath); + dev_file =CreateFile (pdev_iface_detail_data->DevicePath,0 , +FILE_SHARE_READ ,NULL ,OPEN_EXISTING ,0 ,NULL ); +if (!DeviceIoControl (dev_file,IOCTL_STORAGE_GET_DEVICE_NUMBER , +NULL ,0 , &sdn,sizeof (sdn), &size,NULL )) { +CloseHandle (dev_file); +debug_error ("failed to get storage device number" ); +continue ; + } +CloseHandle (dev_file); + + disk =g_new0 (GuestDiskInfo,1 ); + disk->name =g_strdup_printf ("\\\\.\\PhysicalDrive%lu" , + sdn.DeviceNumber); + +g_debug (" number: %lu" , sdn.DeviceNumber); + address =g_malloc0 (sizeof (GuestDiskAddress)); + address->has_dev = true; + address->dev =g_strdup (disk->name); +get_single_disk_info (sdn.DeviceNumber, address, &local_err); +if (local_err) { +g_debug ("failed to get disk info: %s" , +error_get_pretty (local_err)); +error_free (local_err); +qapi_free_GuestDiskAddress (address); + address =NULL ; + }else { + disk->address = address; + disk->has_address = true; + } + + new =g_malloc0 (sizeof (GuestDiskInfoList)); + new->value = disk; + new->next = ret; + ret = new; + } + +SetupDiDestroyDeviceInfoList (dev_info); +return ret; +} +#else static GuestDiskAddressList *build_guest_disk_info (char *guid,Error **errp)@@ -952,6 +1037,12 @@ static GuestDiskAddressList *build_guest_disk_info(char *guid, Error **errp) return NULL; } +GuestDiskInfoList *qmp_guest_get_disks (Error **errp) +{ +error_setg (errp,QERR_UNSUPPORTED ); +return NULL ; +} +#endif /* CONFIG_QGA_NTDDSCSI */ static GuestFilesystemInfo *build_guest_fsinfo (char *guid,Error **errp)@@ -2229,9 +2320,3 @@ GuestOSInfo *qmp_guest_get_osinfo(Error **errp)return info; } - -GuestDiskInfoList *qmp_guest_get_disks (Error **errp) -{ -error_setg (errp,QERR_UNSUPPORTED ); -return NULL ; -}
Re: [PATCH v2 1/3] qga: add command guest-get-disks
In reply to Tomáš GolembiovskýQuoted 9 lines · Tomáš Golembiovský
Add API and stubs for new guest-get-disks command.
The command guest-get-fsinfo can be used to list information about disks and partitions but it is limited only to mounted disks with filesystem. This new command should allow listing information about disks of the VM regardles whether they are mounted or not. This can be usefull for management applications for mapping virtualized devices or pass-through devices to device names in the guest OS.
Quoted 6 lines
Signed-off-by Tomáš Golembiovský <[email protected]>--- qga/commands-posix.c | 6 ++++++ qga/commands-win32.c | 6 ++++++ qga/qapi-schema.json | 29 +++++++++++++++++++++++++++++ 3 files changed, 41 insertions(+)
gentle reminder
Quoted 26 lines · Tomáš Golembiovský
Adds command to list disks of the VM.
The patch does compile on master but to work properly it requires changes to qemu-ga by Thomas Huth in series: Allow guest-get-fsinfo also for non-PCI devices.
v2:
- added new struct in API to handle the information
- split changes into several patches
- for Linux list also slaves, partitions and virtual disks so that the disk hierarchy is preserved
- fixed issues pointed out by MichaelTomáš Golembiovský (3):
qga: add command guest-get-disks
qga: add implementation of guest-get-disks for Linux
qga: add implementation of guest-get-disks for Windowsqga/commands-posix.c | 241 ++++++++++++++++++++++++++++++++++++++++++- qga/commands-win32.c | 91 ++++++++++++++++ qga/qapi-schema.json | 29 ++++++ 3 files changed, 360 insertions(+), 1 deletion(-)Signature · 1 line
2.25.0
Signature · 1 line
Tomáš Golembiovský <[email protected]>
Re: [PATCH v2 1/3] qga: add command guest-get-disks
In reply to Tomáš GolembiovskýQuoted 11 lines · Tomáš Golembiovský
Add API and stubs for new guest-get-disks command.
The command guest-get-fsinfo can be used to list information about disks and partitions but it is limited only to mounted disks with filesystem. This new command should allow listing information about disks of the VM regardles whether they are mounted or not. This can be usefull for management applications for mapping virtualized devices or pass-through devices to device names in the guest OS.
Signed-off-by Tomáš Golembiovský <[email protected]>
---
Quoted 79 lines
qga/commands-posix.c | 6 ++++++ qga/commands-win32.c | 6 ++++++ qga/qapi-schema.json | 29 +++++++++++++++++++++++++++++ 3 files changed, 41 insertions(+)qga/commands-posix.c +6
-0@@ -3042,3 +3042,9 @@ GuestOSInfo *qmp_guest_get_osinfo(Error **errp)return info; } + +GuestDiskInfoList *qmp_guest_get_disks (Error **errp) +{ +error_setg (errp,QERR_UNSUPPORTED ); +return NULL ; +}qga/commands-win32.c +6
-0@@ -2229,3 +2229,9 @@ GuestOSInfo *qmp_guest_get_osinfo(Error **errp)return info; } + +GuestDiskInfoList *qmp_guest_get_disks (Error **errp) +{ +error_setg (errp,QERR_UNSUPPORTED ); +return NULL ; +}qga/qapi-schema.json +8
-0@@ -862,6 +862,35 @@ 'bus': 'int', 'target': 'int', 'unit': 'int', '*serial': 'str', '*dev': 'str'} } +## +# @GuestDiskInfo: +# +# @name: device node (Linux) or device UNC (Windows) +# @partition: whether this is a partition or disk +# @slaves: list of slave devices (Linux) +# @address: disk address information (only for non-virtual devices) +# @alias: optional alias assigned to the disk, on Linux this is a nameassigned
qga/qapi-schema.json +21
-1+# by device mapper +# +# Since 5.2 +## +{ 'struct': 'GuestDiskInfo', + 'data': {'name': 'str', 'partition': 'bool', 'slaves': ['str'], + '*address': 'GuestDiskAddress', '*alias': 'str'} } + +## +# @guest-get-disks: +# +# Returns: The list of disks in the guest. For Windows these are only the +# physical disks. On Linux these are all root block devices of +# non-zero size including e.g. removable devices, loop devices, +# NBD, etc. +# +# Since: 5.2 +## +{ 'command': 'guest-get-disks', + 'returns': ['GuestDiskInfo'] } + ## # @GuestFilesystemInfo: # --2.25.0
Signature · 1 line
Marc-André Lureau
Re: [PATCH v2 2/3] qga: add implementation of guest-get-disks for Linux
In reply to Tomáš GolembiovskýHi
Quoted 4 lines · Tomáš Golembiovský
The command lists all disks (real and virtual) as well as disk partitions. For each disk the list of slave disks is also listed and /dev path is used as a handle so it can be matched with "name" filed of
field
other returned disk entries. For disk partitions the "slave" list is
Quoted 47 lines
populated with the the parent device for easier tracking of hierarchy.
Example output:
{
"return": [... { "name": "/dev/dm-0", "partition": false, "slaves": [ "/dev/sda2" ], "alias": "luks-7062202e-5b9b-433e-81e8-6628c40da9f7" }, { "name": "/dev/sda2", "partition": true, "slaves": [ "/dev/sda" ] }, { "name": "/dev/sda", "partition": false, "address": { "serial": "SAMSUNG_MZ7LN512HCHP-000L1_S1ZKNXAG822493", "bus-type": "sata", ... "dev": "/dev/sda", "target": 0 }, "slaves": [] }, ...]
}Signed-off-by Tomáš Golembiovský <[email protected]>--- qga/commands-posix.c | 247 +++++++++++++++++++++++++++++++++++++++++-- 1 file changed, 240 insertions(+), 7 deletions(-)qga/commands-posix.c +0
-0
qga/commands-posix.c extern char **environ; · line 68
Quoted 7 lines
qga/commands-posix.c +3
-0@@ -62,6 +62,9 @@ extern char **environ;#endif #endif +G_DEFINE_AUTOPTR_CLEANUP_FUNC (GuestFilesystemInfo, + qapi_free_GuestFilesystemInfo) +
This will now conflict with qapi-gen generated headers.
static void ga_wait_child(pid_t pid, int *status, Error **errp)
Quoted 4 lines
qga/commands-posix.c +0
-0{pid_t rpid;@@ -1150,6 +1153,21 @@ static void build_guest_fsinfo_for_virtual_device(char const *syspath,
qga/commands-posix.c static void · line 1163
Quoted 10 lines
qga/commands-posix.c +6
-0closedir (dir); } +static bool is_disk_virtual (const char *devpath,Error **errp) +{ + g_autofree char *syspath = realpath(devpath, NULL); + +if (!syspath) { +error_setg_errno (errp, errno,"realpath(\"%s\")" , devpath);
+ return false;
qga/commands-posix.c static void build_guest_fsinfo_for_virtual_device(char const *syspath,
Quoted 7 lines
qga/commands-posix.c +6
-0+ } +if (strstr (syspath,"/devices/virtual/block/" )) { +return true; + }else { +return false; + }
simply to "return strstr(syspath, "/devices/virtual/block/") != NULL;" ?
(Or strstr(syspath, "/devices/virtual/block/") ? true : false )
+}
qga/commands-posix.c static void build_guest_fsinfo_for_device(char const · line 1191
Quoted 11 lines
qga/commands-posix.c +2
-0+/* Dispatch to functions for virtual/real device */ static void build_guest_fsinfo_for_device(char const *devpath, GuestFilesystemInfo *fs,@@ -1168,6 +1186,7 @@ static void build_guest_fsinfo_for_device(char const *devpath,g_debug (" parse sysfs path '%s'" , syspath); +/* TODO: use is_disk_virtual() */
just do it, no?
if (strstr(syspath, "/devices/virtual/block/")) {Quoted 10 lines
qga/commands-posix.c +0
-0build_guest_fsinfo_for_virtual_device (syspath, fs, errp);} else {qga/commands-posix.c +3
-0@@ -1177,6 +1196,225 @@ static void build_guest_fsinfo_for_device(char const *devpath,free (syspath); } +#ifdef CONFIG_LIBUDEV + +/*
qga/commands-posix.c static void build_guest_fsinfo_for_device(char · line 1212
Quoted 10 lines
qga/commands-posix.c +8
-0+* Wrapper around build_guest_fsinfo_for_device() for getting just +* the disk address. +*/ +static GuestDiskAddress *get_disk_address (const char *syspath,Error **errp) +{ +g_autoptr (GuestFilesystemInfo) fs =NULL ; + + fs =g_new0 (GuestFilesystemInfo,1 );
Heap allocation / auto wasn't really necessary here, but ok.
qga/commands-posix.c static void build_guest_fsinfo_for_device(char const *devpath, · line 1214
Quoted 6 lines
qga/commands-posix.c +5
-0+build_guest_fsinfo_for_device (syspath, fs, errp); +if (fs->disk !=NULL ) { +return g_steal_pointer (&fs->disk->value); + } +return NULL ;
Could also be a onliner, but perhaps less readable.
+}
qga/commands-posix.c static void build_guest_fsinfo_for_device(char const *devpath, · line 1223
Quoted 9 lines
qga/commands-posix.c +8
-0+ +static char *get_alias_for_syspath (const char *syspath) +{ +struct udev *udev =NULL ; +struct udev_device *udevice =NULL ; +char *ret =NULL ; + + udev =udev_new ();
I would have g_return_val_if_fail(udev != NULL, NULL); here as,
+ udevice = udev_device_new_from_syspath(udev, syspath);
Quoted 1 line
udev_device_new_from_syspath() might crash otherwise.
qga/commands-posix.c static void build_guest_fsinfo_for_device(char const *devpath, · line 1231
Quoted 8 lines
qga/commands-posix.c +7
-0+if (udev ==NULL || udevice ==NULL ) { +g_debug ("failed to query udev" ); + }else { +const char *alias =udev_device_get_property_value ( + udevice,"DM_NAME" ); +if (alias !=NULL && *alias !=0 ) { + ret =g_strdup (alias);
g_strdup() works fine with NULL. Is there "" empty aliases? Why not report them too?
+ }
Quoted 7 lines
qga/commands-posix.c +6
-0+ } + +udev_unref (udev); +udev_device_unref (udevice); +return ret; +}
qga/commands-posix.c static void build_guest_fsinfo_for_device(char const *devpath, · line 1248
Quoted 10 lines
qga/commands-posix.c +10
-0+ +static char *get_device_for_syspath (const char *syspath) +{ +struct udev *udev =NULL ; +struct udev_device *udevice =NULL ; +char *ret =NULL ; + + udev =udev_new (); + udevice =udev_device_new_from_syspath (udev, syspath); +if (udev ==NULL || udevice ==NULL ) {
Same as above
+ g_debug("failed to query udev");
qga/commands-posix.c static void build_guest_fsinfo_for_device(char const *devpath, · line 1257
Quoted 9 lines
qga/commands-posix.c +8
-0+ }else { + ret =g_strdup (udev_device_get_devnode (udevice)); + } +udev_unref (udev); +udev_device_unref (udevice); +return ret; +} +
+GuestDiskInfoList *qmp_guest_get_disks(Error **errp)
Quoted 27 lines
qga/commands-posix.c +10
-0+{ +GuestDiskInfoList *item, *ret =NULL ; +GuestDiskInfo *disk, *partition; +DIR *dp =NULL ; +struct dirent *de =NULL ; + +g_debug ("listing /sys/block directory" ); + dp =opendir ("/sys/block" ); +if (dp ==NULL ) { + error_setg_errno(errp, errno, "Can't open directory\"/sys/block\"");
qga/commands-posix.c +15
-0+return NULL ; + } +while ((de =readdir (dp)) !=NULL ) { + g_autofree char *disk_dir = NULL, *line = NULL, + *size_dir =NULL , *slaves_dir =NULL ; +struct dirent *de_disk, *de_slaves; +DIR *dp_disk =NULL , *dp_slaves =NULL ; +FILE *fp =NULL ; +size_t n =0 ; +Error *local_err =NULL ; +if (de->d_type !=DT_LNK ) { +g_debug (" skipping entry: %s" , de->d_name); +continue ; + } +
qga/commands-posix.c static void build_guest_fsinfo_for_device(char const *devpath, · line 1293
Quoted 10 lines
qga/commands-posix.c +10
-0+/* Check size and skip zero-sized disks */ +g_debug (" checking disk size" ); + size_dir =g_strdup_printf ("/sys/block/%s/size" , de->d_name); + fp =fopen (size_dir,"r" ); +if (!fp) { +g_debug (" failed to read disk size" ); +continue ; + } +if (getline (&line, &n, fp) ==-1 ) { +g_debug (" failed to read disk size" );
line: getline(3) "This buffer should be freed by the user program even if getline() failed."
+ fclose(fp);
qga/commands-posix.c static void build_guest_fsinfo_for_device(char const *devpath, · line 1298
Quoted 5 lines
qga/commands-posix.c +4
-0+continue ; + } +fclose (fp); +if (strcmp (line,"0\n" ) ==0 ) {
It would be slightly better to defend against NULL crash here, with g_strcmp0()
+ g_debug(" skipping zero-sized disk");
qga/commands-posix.c static void build_guest_fsinfo_for_device(char const *devpath, · line 1283
Quoted 4 lines
qga/commands-posix.c +3
-0+continue ; + } +
line is never freed?
+ g_debug(" adding %s", de->d_name);
qga/commands-posix.c static void build_guest_fsinfo_for_device(char const *devpath, · line 1311
Quoted 9 lines
qga/commands-posix.c +8
-0+ disk_dir =g_strdup_printf ("/sys/block/%s" , de->d_name); + disk =g_new0 (GuestDiskInfo,1 ); + disk->name =get_device_for_syspath (disk_dir); + disk->partition = false; + disk->alias =get_alias_for_syspath (disk_dir); +if (disk->alias !=NULL ) { + disk->has_alias = true; + }
Could be a single line too
+ item = g_new0(GuestDiskInfoList, 1);
qga/commands-posix.c static void build_guest_fsinfo_for_device(char const *devpath, · line 1323
Quoted 12 lines
qga/commands-posix.c +11
-0+ item->value = disk; + item->next = ret; + ret = item; + +/* Get address for non-virtual devices */ +bool is_virtual =is_disk_virtual (disk_dir, &local_err); +if (local_err !=NULL ) { +g_debug (" failed to check disk path, ignoring error: %s" , +error_get_pretty (local_err)); +error_free (local_err); + local_err =NULL ;
+ /* Don't try to get the address */
Quoted 16 lines
qga/commands-posix.c +15
-0+ is_virtual = true; + } +if (!is_virtual) { + disk->address =get_disk_address (disk_dir, &local_err); +if (local_err !=NULL ) { +g_debug (" failed to get device info, ignoring error: %s" , +error_get_pretty (local_err)); +error_free (local_err); + local_err =NULL ; + }else if (disk->address !=NULL ) { + disk->has_address = true; + } + } + +/* List slave disks */
qga/commands-posix.c static void build_guest_fsinfo_for_device(char const *devpath, · line 1349
Quoted 10 lines
qga/commands-posix.c +10
-0+ slaves_dir =g_strdup_printf ("%s/slaves" , disk_dir); +g_debug (" listing entries in: %s" , slaves_dir); + dp_slaves =opendir (slaves_dir); +while ((de_slaves =readdir (dp_slaves)) !=NULL ) { + g_autofree char *slave_dir = NULL; +char *slave_dev; +strList *slave_item =NULL ; + +if ((strcmp ("." , de_slaves->d_name) ==0 ) || + (strcmp (".." , de_slaves->d_name) ==0 )) {
+ continue;
Quoted 96 lines
qga/commands-posix.c +43
-0+ } + +/* Add slave disks */ + slave_dir =g_strdup_printf ("%s/%s" , + slaves_dir, de_slaves->d_name); + slave_dev =get_device_for_syspath (slave_dir); +if (slave_dev !=NULL ) { +g_debug (" adding slave device: %s" , slave_dev); + slave_item =g_new0 (strList,1 ); + slave_item->value = slave_dev; + slave_item->next = disk->slaves; + disk->slaves = slave_item; + } + } +closedir (dp_slaves); + +/* +* Detect partitions subdirectory name is "<parent><number>" or +* "<parent>p<number>" +*/ + dp_disk =opendir (disk_dir); +while ((de_disk =readdir (dp_disk)) !=NULL ) { +size_t len; + g_autofree char *partition_dir = NULL; + +if (!(de_disk->d_type &DT_DIR )) { +continue ; + } + + len =strlen (de->d_name); +if (!(strncmp (de->d_name, de_disk->d_name, len) ==0 && + ((*(de_disk->d_name + len) =='p' && +isdigit (*(de_disk->d_name + len +1 ))) || +isdigit (*(de_disk->d_name + len))))) { +continue ; + } + + partition_dir =g_strdup_printf ("%s/%s" , + disk_dir, de_disk->d_name); + partition =g_new0 (GuestDiskInfo,1 ); + partition->name =get_device_for_syspath (partition_dir); + partition->partition = true; +/* Add parent disk as slave for easier tracking of hierarchy */
qga/commands-posix.c +26
-8+ partition->slaves =g_new0 (strList,1 ); + partition->slaves->value =g_strdup (disk->name); + + item =g_new0 (GuestDiskInfoList,1 ); + item->value = partition; + item->next = ret; + ret = item; + + } +closedir (dp_disk); + } +return ret; +} + +#else + +GuestDiskInfoList *qmp_guest_get_disks (Error **errp) +{ +error_setg (errp,QERR_UNSUPPORTED ); +return NULL ; +} + +#endif +/* Return a list of the disk device(s)' info which @mount lies on */ static GuestFilesystemInfo *build_guest_fsinfo (struct FsMount *mount,Error **errp)@@ -2809,7 +3047,8 @@ GList *ga_command_blacklist_init(GList *blacklist)const char *list[] = {"guest-get-fsinfo" ,"guest-fsfreeze-status" ,"guest-fsfreeze-freeze" ,"guest-fsfreeze-freeze-list" , -"guest-fsfreeze-thaw" ,"guest-get-fsinfo" ,NULL }; +"guest-fsfreeze-thaw" ,"guest-get-fsinfo" , +"guest-get-disks" ,NULL };char **p = (char **)list;while (*p) {@@ -3042,9 +3281,3 @@ GuestOSInfo *qmp_guest_get_osinfo(Error **errp)return info; } - -GuestDiskInfoList *qmp_guest_get_disks (Error **errp) -{ -error_setg (errp,QERR_UNSUPPORTED ); -return NULL ; -} --2.25.0
Signature · 1 line
Marc-André Lureau
Re: [PATCH v2 3/3] qga: add implementation of guest-get-disks for Windows
In reply to Tomáš GolembiovskýHi
Quoted 62 lines · Tomáš Golembiovský
The command lists all the physical disk drives. Unlike for Linux partitions and virtual volumes are not listed.
Example output:
{
"return": [{ "name": "\\\\.\\PhysicalDrive0", "partition": false, "address": { "serial": "QM00001", "bus-type": "sata", ... }, "slaves": [] }]
}Signed-off-by Tomáš Golembiovský <[email protected]>--- qga/commands-win32.c | 97 +++++++++++++++++++++++++++++++++++++++++--- 1 file changed, 91 insertions(+), 6 deletions(-)qga/commands-win32.c +27
-0@@ -945,6 +945,91 @@ out:return list; } +GuestDiskInfoList *qmp_guest_get_disks (Error **errp) +{ +GuestDiskInfoList *new =NULL , *ret =NULL ; +HDEVINFO dev_info; +SP_DEVICE_INTERFACE_DATA dev_iface_data; +int i; + + dev_info =SetupDiGetClassDevs (&GUID_DEVINTERFACE_DISK ,0 ,0 , +DIGCF_PRESENT |DIGCF_DEVICEINTERFACE ); +if (dev_info ==INVALID_HANDLE_VALUE ) { +error_setg_win32 (errp,GetLastError (),"failed to get device tree"); +return NULL ; + } + +g_debug ("enumerating devices" ); + dev_iface_data.cbSize =sizeof (SP_DEVICE_INTERFACE_DATA ); +for (i =0 ; +SetupDiEnumDeviceInterfaces (dev_info,NULL , &GUID_DEVINTERFACE_DISK , + i, &dev_iface_data); + i++) { +GuestDiskAddress *address =NULL ; +GuestDiskInfo *disk =NULL ; +Error *local_err =NULL ; + g_autofree PSP_DEVICE_INTERFACE_DETAIL_DATA + pdev_iface_detail_data =NULL ; +STORAGE_DEVICE_NUMBER sdn; +HANDLE dev_file;
qga/commands-win32.c out: · line 986
Quoted 10 lines
qga/commands-win32.c +9
-0+DWORD size =0 ; + +g_debug (" getting device path" ); +while (!SetupDiGetDeviceInterfaceDetail (dev_info, &dev_iface_data, + pdev_iface_detail_data, + size, &size, +NULL )) { +if (GetLastError () ==ERROR_INSUFFICIENT_BUFFER ) { + pdev_iface_detail_data =g_malloc (size);
Since this is called in a loop, you should use g_realloc() to avoid potential leaks.
+ pdev_iface_detail_data->cbSize =
Quoted 77 lines
qga/commands-win32.c +48
-0+ sizeof(*pdev_iface_detail_data); + }else { +g_debug ("failed to get device interface details" ); +continue ; + } + } + +g_debug (" device: %s" , pdev_iface_detail_data->DevicePath); + dev_file =CreateFile (pdev_iface_detail_data->DevicePath,0 , +FILE_SHARE_READ ,NULL ,OPEN_EXISTING ,0 ,NULL ); +if (!DeviceIoControl (dev_file,IOCTL_STORAGE_GET_DEVICE_NUMBER , +NULL ,0 , &sdn,sizeof (sdn), &size,NULL )) { +CloseHandle (dev_file); +debug_error ("failed to get storage device number" ); +continue ; + } +CloseHandle (dev_file); + + disk =g_new0 (GuestDiskInfo,1 ); + disk->name =g_strdup_printf ("\\\\.\\PhysicalDrive%lu" , + sdn.DeviceNumber); + +g_debug (" number: %lu" , sdn.DeviceNumber); + address =g_malloc0 (sizeof (GuestDiskAddress)); + address->has_dev = true; + address->dev =g_strdup (disk->name); +get_single_disk_info (sdn.DeviceNumber, address, &local_err); +if (local_err) { +g_debug ("failed to get disk info: %s" , +error_get_pretty (local_err)); +error_free (local_err); +qapi_free_GuestDiskAddress (address); + address =NULL ; + }else { + disk->address = address; + disk->has_address = true; + } + + new =g_malloc0 (sizeof (GuestDiskInfoList)); + new->value = disk; + new->next = ret; + ret = new; + } + +SetupDiDestroyDeviceInfoList (dev_info); +return ret; +} +#else static GuestDiskAddressList *build_guest_disk_info(char *guid, Error**errp)
qga/commands-win32.c +6
-0@@ -952,6 +1037,12 @@ static GuestDiskAddressList *build_guest_disk_info(char *guid, Error **errp) return NULL; } +GuestDiskInfoList *qmp_guest_get_disks (Error **errp) +{ +error_setg (errp,QERR_UNSUPPORTED ); +return NULL ; +} +#endif /* CONFIG_QGA_NTDDSCSI */ static GuestFilesystemInfo *build_guest_fsinfo(char *guid, Error **errp)
qga/commands-win32.c +0
-7@@ -2229,9 +2320,3 @@ GuestOSInfo *qmp_guest_get_osinfo(Error **errp)return info; } - -GuestDiskInfoList *qmp_guest_get_disks (Error **errp) -{ -error_setg (errp,QERR_UNSUPPORTED ); -return NULL ; -} --
Quoted 4 lines
2.25.0
The rest looks ok to me.
Signature · 1 line
Marc-André Lureau
Re: [PATCH v2 2/3] qga: add implementation of guest-get-disks for Linux
In reply to Marc-André LureauQuoted 105 lines · Marc-André Lureau
Hi
Quoted 4 lines · Tomáš Golembiovský
The command lists all disks (real and virtual) as well as disk partitions. For each disk the list of slave disks is also listed and /dev path is used as a handle so it can be matched with "name" filed of
field
other returned disk entries. For disk partitions the "slave" list is
Quoted 47 lines
populated with the the parent device for easier tracking of hierarchy.
Example output:
{
"return": [... { "name": "/dev/dm-0", "partition": false, "slaves": [ "/dev/sda2" ], "alias": "luks-7062202e-5b9b-433e-81e8-6628c40da9f7" }, { "name": "/dev/sda2", "partition": true, "slaves": [ "/dev/sda" ] }, { "name": "/dev/sda", "partition": false, "address": { "serial": "SAMSUNG_MZ7LN512HCHP-000L1_S1ZKNXAG822493", "bus-type": "sata", ... "dev": "/dev/sda", "target": 0 }, "slaves": [] }, ...]
}Signed-off-by Tomáš Golembiovský <[email protected]>--- qga/commands-posix.c | 247 +++++++++++++++++++++++++++++++++++++++++-- 1 file changed, 240 insertions(+), 7 deletions(-)qga/commands-posix.c +0
-0qga/commands-posix.c extern char **environ; · line 68
Quoted 7 lines
qga/commands-posix.c +3
-0@@ -62,6 +62,9 @@ extern char **environ;#endif #endif +G_DEFINE_AUTOPTR_CLEANUP_FUNC (GuestFilesystemInfo, + qapi_free_GuestFilesystemInfo) +This will now conflict with qapi-gen generated headers.
static void
ga_wait_child(pid_t pid, int *status, Error **errp)Quoted 4 lines
qga/commands-posix.c +0
-0{pid_t rpid;@@ -1150,6 +1153,21 @@ static void build_guest_fsinfo_for_virtual_device(char const *syspath,qga/commands-posix.c static void · line 1163
Quoted 10 lines
qga/commands-posix.c +6
-0closedir (dir); } +static bool is_disk_virtual (const char *devpath,Error **errp) +{ + g_autofree char *syspath = realpath(devpath, NULL); + +if (!syspath) { +error_setg_errno (errp, errno,"realpath(\"%s\")" , devpath);+ return false;
qga/commands-posix.c static void build_guest_fsinfo_for_virtual_device(char const *syspath,
Quoted 7 lines
qga/commands-posix.c +6
-0+ } +if (strstr (syspath,"/devices/virtual/block/" )) { +return true; + }else { +return false; + }simply to "return
strstr(syspath, "/devices/virtual/block/")!= NULL;" ?
(Orstrstr(syspath, "/devices/virtual/block/")? true : false )+}
Quoted 7 lines
qga/commands-posix.c +1
-0+/* Dispatch to functions for virtual/real device */ static void build_guest_fsinfo_for_device(char const *devpath, GuestFilesystemInfo *fs,@@ -1168,6 +1186,7 @@ static void build_guest_fsinfo_for_device(char const *devpath,
Quoted 6 lines
qga/commands-posix.c static void build_guest_fsinfo_for_device(char const *devpath,
Quoted 4 lines
qga/commands-posix.c +1
-0g_debug (" parse sysfs path '%s'" , syspath); +/* TODO: use is_disk_virtual() */ just do it, no?
It's great that I put a note there otherwise I might have forgotten to do it. ;)
Quoted 9 lines
if (strstr(syspath, "/devices/virtual/block/")) {Quoted 7 lines
qga/commands-posix.c +0
-0build_guest_fsinfo_for_virtual_device (syspath, fs, errp);} else {qga/commands-posix.c +0
-0@@ -1177,6 +1196,225 @@ static void build_guest_fsinfo_for_device(char const *devpath,free (syspath); }
Quoted 15 lines
qga/commands-posix.c static void build_guest_fsinfo_for_device(char const *devpath,
Quoted 13 lines
qga/commands-posix.c +11
-0+#ifdef CONFIG_LIBUDEV + +/* +* Wrapper around build_guest_fsinfo_for_device() for getting just +* the disk address. +*/ +static GuestDiskAddress *get_disk_address (const char *syspath,Error **errp) +{ +g_autoptr (GuestFilesystemInfo) fs =NULL ; + + fs =g_new0 (GuestFilesystemInfo,1 );Heap allocation / auto wasn't really necessary here, but ok.
I used it so that qapi_free_GuestFilesystemInfo() is called on function exit in all cases. I am not sure if I could do that if fs were on the stack.
Quoted 10 lines
qga/commands-posix.c static void build_guest_fsinfo_for_device(char const *devpath, · line 1214
Quoted 8 lines
qga/commands-posix.c +5
-0+build_guest_fsinfo_for_device (syspath, fs, errp); +if (fs->disk !=NULL ) { +return g_steal_pointer (&fs->disk->value); + } +return NULL ;Could also be a onliner, but perhaps less readable.
Yeah, I prefer it this way.
Quoted 14 lines
+}
qga/commands-posix.c static void build_guest_fsinfo_for_device(char const *devpath, · line 1223
Quoted 9 lines
qga/commands-posix.c +8
-0+ +static char *get_alias_for_syspath (const char *syspath) +{ +struct udev *udev =NULL ; +struct udev_device *udevice =NULL ; +char *ret =NULL ; + + udev =udev_new ();I would have
g_return_val_if_fail(udev != NULL, NULL); here as,
Quoted 4 lines
+ udevice =
udev_device_new_from_syspath(udev, syspath);Quoted 1 line
udev_device_new_from_syspath()might crash otherwise.
That is probably true. This may require fixes at other places too.
Quoted 11 lines
qga/commands-posix.c static void build_guest_fsinfo_for_device(char const *devpath, · line 1231
Quoted 10 lines
qga/commands-posix.c +7
-0+if (udev ==NULL || udevice ==NULL ) { +g_debug ("failed to query udev" ); + }else { +const char *alias =udev_device_get_property_value ( + udevice,"DM_NAME" ); +if (alias !=NULL && *alias !=0 ) { + ret =g_strdup (alias);
Quoted 2 lines
g_strdup()works fine with NULL. Is there "" empty aliases? Why not report them too?
NULL means an error and empty alias means there is no alias. I will put that in a comment there. In QAPI we have alias as optional which seems preferable rather than always returning empty string.
Quoted 65 lines
+ }
Quoted 7 lines
qga/commands-posix.c +6
-0+ } + +udev_unref (udev); +udev_device_unref (udevice); +return ret; +}qga/commands-posix.c static void build_guest_fsinfo_for_device(char const *devpath, · line 1248
Quoted 10 lines
qga/commands-posix.c +10
-0+ +static char *get_device_for_syspath (const char *syspath) +{ +struct udev *udev =NULL ; +struct udev_device *udevice =NULL ; +char *ret =NULL ; + + udev =udev_new (); + udevice =udev_device_new_from_syspath (udev, syspath); +if (udev ==NULL || udevice ==NULL ) {Same as above
+
g_debug("failed to query udev");qga/commands-posix.c static void build_guest_fsinfo_for_device(char const *devpath, · line 1257
Quoted 9 lines
qga/commands-posix.c +8
-0+ }else { + ret =g_strdup (udev_device_get_devnode (udevice)); + } +udev_unref (udev); +udev_device_unref (udevice); +return ret; +} ++GuestDiskInfoList *qmp_guest_get_disks(Error **errp)
Quoted 32 lines
qga/commands-posix.c +10
-0+{ +GuestDiskInfoList *item, *ret =NULL ; +GuestDiskInfo *disk, *partition; +DIR *dp =NULL ; +struct dirent *de =NULL ; + +g_debug ("listing /sys/block directory" ); + dp =opendir ("/sys/block" ); +if (dp ==NULL ) { + error_setg_errno(errp, errno, "Can't open directory\"/sys/block\"");
qga/commands-posix.c +21
-0+return NULL ; + } +while ((de =readdir (dp)) !=NULL ) { + g_autofree char *disk_dir = NULL, *line = NULL, + *size_dir =NULL , *slaves_dir =NULL ; +struct dirent *de_disk, *de_slaves; +DIR *dp_disk =NULL , *dp_slaves =NULL ; +FILE *fp =NULL ; +size_t n =0 ; +Error *local_err =NULL ; +if (de->d_type !=DT_LNK ) { +g_debug (" skipping entry: %s" , de->d_name); +continue ; + } + +/* Check size and skip zero-sized disks */ +g_debug (" checking disk size" ); + size_dir =g_strdup_printf ("/sys/block/%s/size" , de->d_name); + fp =fopen (size_dir,"r" ); +if (!fp) { +g_debug (" failed to read disk size" );
Quoted 8 lines
qga/commands-posix.c static void build_guest_fsinfo_for_device(char const *devpath, · line 1293
Quoted 5 lines
qga/commands-posix.c +4
-0+continue ; + } +if (getline (&line, &n, fp) ==-1 ) { +g_debug (" failed to read disk size" );line: getline(3) "This buffer should be freed by the user program even if
getline()failed."
That is handled by the g_autofree, or am I missing something? line will get out of scope after every interation (even with continue). Or do you prefer to have it explicit and free as soon as we don't need it?
Quoted 172 lines
+ fclose(fp);
qga/commands-posix.c static void build_guest_fsinfo_for_device(char const *devpath, · line 1298
Quoted 5 lines
qga/commands-posix.c +4
-0+continue ; + } +fclose (fp); +if (strcmp (line,"0\n" ) ==0 ) {It would be slightly better to defend against NULL crash here, with
g_strcmp0()+
g_debug(" skipping zero-sized disk");qga/commands-posix.c static void build_guest_fsinfo_for_device(char const *devpath, · line 1283
Quoted 4 lines
qga/commands-posix.c +3
-0+continue ; + } +line is never freed?
+
g_debug(" adding %s", de->d_name);qga/commands-posix.c static void build_guest_fsinfo_for_device(char const *devpath, · line 1311
Quoted 9 lines
qga/commands-posix.c +8
-0+ disk_dir =g_strdup_printf ("/sys/block/%s" , de->d_name); + disk =g_new0 (GuestDiskInfo,1 ); + disk->name =get_device_for_syspath (disk_dir); + disk->partition = false; + disk->alias =get_alias_for_syspath (disk_dir); +if (disk->alias !=NULL ) { + disk->has_alias = true; + }Could be a single line too
+ item =
g_new0(GuestDiskInfoList, 1);qga/commands-posix.c static void build_guest_fsinfo_for_device(char const *devpath, · line 1323
Quoted 12 lines
qga/commands-posix.c +11
-0+ item->value = disk; + item->next = ret; + ret = item; + +/* Get address for non-virtual devices */ +bool is_virtual =is_disk_virtual (disk_dir, &local_err); +if (local_err !=NULL ) { +g_debug (" failed to check disk path, ignoring error: %s" , +error_get_pretty (local_err)); +error_free (local_err); + local_err =NULL ;+ /* Don't try to get the address */
Quoted 16 lines
qga/commands-posix.c +15
-0+ is_virtual = true; + } +if (!is_virtual) { + disk->address =get_disk_address (disk_dir, &local_err); +if (local_err !=NULL ) { +g_debug (" failed to get device info, ignoring error: %s" , +error_get_pretty (local_err)); +error_free (local_err); + local_err =NULL ; + }else if (disk->address !=NULL ) { + disk->has_address = true; + } + } + +/* List slave disks */ qga/commands-posix.c static void build_guest_fsinfo_for_device(char const *devpath, · line 1349
Quoted 10 lines
qga/commands-posix.c +10
-0+ slaves_dir =g_strdup_printf ("%s/slaves" , disk_dir); +g_debug (" listing entries in: %s" , slaves_dir); + dp_slaves =opendir (slaves_dir); +while ((de_slaves =readdir (dp_slaves)) !=NULL ) { + g_autofree char *slave_dir = NULL; +char *slave_dev; +strList *slave_item =NULL ; + +if ((strcmp ("." , de_slaves->d_name) ==0 ) || + (strcmp (".." , de_slaves->d_name) ==0 )) {+ continue;
Quoted 96 lines
qga/commands-posix.c +43
-0+ } + +/* Add slave disks */ + slave_dir =g_strdup_printf ("%s/%s" , + slaves_dir, de_slaves->d_name); + slave_dev =get_device_for_syspath (slave_dir); +if (slave_dev !=NULL ) { +g_debug (" adding slave device: %s" , slave_dev); + slave_item =g_new0 (strList,1 ); + slave_item->value = slave_dev; + slave_item->next = disk->slaves; + disk->slaves = slave_item; + } + } +closedir (dp_slaves); + +/* +* Detect partitions subdirectory name is "<parent><number>" or +* "<parent>p<number>" +*/ + dp_disk =opendir (disk_dir); +while ((de_disk =readdir (dp_disk)) !=NULL ) { +size_t len; + g_autofree char *partition_dir = NULL; + +if (!(de_disk->d_type &DT_DIR )) { +continue ; + } + + len =strlen (de->d_name); +if (!(strncmp (de->d_name, de_disk->d_name, len) ==0 && + ((*(de_disk->d_name + len) =='p' && +isdigit (*(de_disk->d_name + len +1 ))) || +isdigit (*(de_disk->d_name + len))))) { +continue ; + } + + partition_dir =g_strdup_printf ("%s/%s" , + disk_dir, de_disk->d_name); + partition =g_new0 (GuestDiskInfo,1 ); + partition->name =get_device_for_syspath (partition_dir); + partition->partition = true; +/* Add parent disk as slave for easier tracking of hierarchy */
qga/commands-posix.c +26
-8+ partition->slaves =g_new0 (strList,1 ); + partition->slaves->value =g_strdup (disk->name); + + item =g_new0 (GuestDiskInfoList,1 ); + item->value = partition; + item->next = ret; + ret = item; + + } +closedir (dp_disk); + } +return ret; +} + +#else + +GuestDiskInfoList *qmp_guest_get_disks (Error **errp) +{ +error_setg (errp,QERR_UNSUPPORTED ); +return NULL ; +} + +#endif +/* Return a list of the disk device(s)' info which @mount lies on */ static GuestFilesystemInfo *build_guest_fsinfo (struct FsMount *mount,Error **errp)@@ -2809,7 +3047,8 @@ GList *ga_command_blacklist_init(GList *blacklist)const char *list[] = {"guest-get-fsinfo" ,"guest-fsfreeze-status" ,"guest-fsfreeze-freeze" ,"guest-fsfreeze-freeze-list" , -"guest-fsfreeze-thaw" ,"guest-get-fsinfo" ,NULL }; +"guest-fsfreeze-thaw" ,"guest-get-fsinfo" , +"guest-get-disks" ,NULL };char **p = (char **)list;while (*p) {@@ -3042,9 +3281,3 @@ GuestOSInfo *qmp_guest_get_osinfo(Error **errp)return info; } - -GuestDiskInfoList *qmp_guest_get_disks (Error **errp) -{ -error_setg (errp,QERR_UNSUPPORTED ); -return NULL ; -} --2.25.0
Signature · 1 line
Marc-André Lureau
Signature · 1 line
Tomáš Golembiovský <[email protected]>
Re: [PATCH v2 1/3] qga: add command guest-get-disks
In reply to Tomáš GolembiovskýQuoted 49 lines · Tomáš Golembiovský
Add API and stubs for new guest-get-disks command.
The command guest-get-fsinfo can be used to list information about disks and partitions but it is limited only to mounted disks with filesystem. This new command should allow listing information about disks of the VM regardles whether they are mounted or not. This can be usefull for management applications for mapping virtualized devices or pass-through devices to device names in the guest OS.
Signed-off-by Tomáš Golembiovský <[email protected]>--- qga/commands-posix.c | 6 ++++++ qga/commands-win32.c | 6 ++++++ qga/qapi-schema.json | 29 +++++++++++++++++++++++++++++ 3 files changed, 41 insertions(+)qga/commands-posix.c +6
-0@@ -3042,3 +3042,9 @@ GuestOSInfo *qmp_guest_get_osinfo(Error **errp)return info; } + +GuestDiskInfoList *qmp_guest_get_disks (Error **errp) +{ +error_setg (errp,QERR_UNSUPPORTED ); +return NULL ; +}qga/commands-win32.c +6
-0@@ -2229,3 +2229,9 @@ GuestOSInfo *qmp_guest_get_osinfo(Error **errp)return info; } + +GuestDiskInfoList *qmp_guest_get_disks (Error **errp) +{ +error_setg (errp,QERR_UNSUPPORTED ); +return NULL ; +}qga/qapi-schema.json +0
-0
qga/qapi-schema.json line 870
Quoted 9 lines
qga/qapi-schema.json +6
-0@@ -862,6 +862,35 @@ 'bus': 'int', 'target': 'int', 'unit': 'int', '*serial': 'str', '*dev': 'str'} } +## +# @GuestDiskInfo: +# +# @name: device node (Linux) or device UNC (Windows) +# @partition: whether this is a partition or disk +# @slaves: list of slave devices (Linux)
What are "slave devices" ?
For that matter, please don't use the term "slaves" at all in any new code.
qga/qapi-schema.json line 879
Quoted 9 lines
qga/qapi-schema.json +9
-0+# @address: disk address information (only for non-virtual devices) +# @alias: optional alias assigned to the disk, on Linux this is a name assigned +# by device mapper +# +# Since 5.2 +## +{ 'struct': 'GuestDiskInfo', + 'data': {'name': 'str', 'partition': 'bool', 'slaves': ['str'], + '*address': 'GuestDiskAddress', '*alias': 'str'} }
Regards,
Daniel
Signature · 3 lines
|: https://berrange.com -o- https://www.flickr.com/photos/dberrange :| |: https://libvirt.org -o- https://fstop138.berrange.com :| |: https://entangle-photo.org -o- https://www.instagram.com/dberrange :|
Re: [PATCH v2 2/3] qga: add implementation of guest-get-disks for Linux
In reply to Tomáš GolembiovskýHi
Quoted 6 lines · Tomáš Golembiovský
Quoted 4 lines · Marc-André Lureau
Quoted 3 lines
qga/commands-posix.c +2
-0+if (getline (&line, &n, fp) ==-1 ) { +g_debug (" failed to read disk size" );
Quoted 7 lines
Quoted 2 lines
line: getline(3) "This buffer should be freed by the user program even if
getline()failed."That is handled by the
g_autofree, or am I missing something?linewill get out of scope after every interation (even with continue). Or do
Ah right, I got confused.
thanks
Signature · 1 line
Marc-André Lureau
Re: [PATCH v2 2/3] qga: add implementation of guest-get-disks for Linux
In reply to Tomáš GolembiovskýQuoted 183 lines · Tomáš Golembiovský
The command lists all disks (real and virtual) as well as disk partitions. For each disk the list of slave disks is also listed and /dev path is used as a handle so it can be matched with "name" filed of other returned disk entries. For disk partitions the "slave" list is populated with the the parent device for easier tracking of hierarchy.
Example output:
{
"return": [... { "name": "/dev/dm-0", "partition": false, "slaves": [ "/dev/sda2" ], "alias": "luks-7062202e-5b9b-433e-81e8-6628c40da9f7" }, { "name": "/dev/sda2", "partition": true, "slaves": [ "/dev/sda" ] }, { "name": "/dev/sda", "partition": false, "address": { "serial": "SAMSUNG_MZ7LN512HCHP-000L1_S1ZKNXAG822493", "bus-type": "sata", ... "dev": "/dev/sda", "target": 0 }, "slaves": [] }, ...]
}Signed-off-by Tomáš Golembiovský <[email protected]>--- qga/commands-posix.c | 247 +++++++++++++++++++++++++++++++++++++++++-- 1 file changed, 240 insertions(+), 7 deletions(-)qga/commands-posix.c +108
-0@@ -62,6 +62,9 @@ extern char **environ;#endif #endif +G_DEFINE_AUTOPTR_CLEANUP_FUNC (GuestFilesystemInfo, + qapi_free_GuestFilesystemInfo) +static void ga_wait_child (pid_t pid,int *status,Error **errp) {pid_t rpid;@@ -1150,6 +1153,21 @@ static void build_guest_fsinfo_for_virtual_device(char const *syspath,closedir (dir); } +static bool is_disk_virtual (const char *devpath,Error **errp) +{ + g_autofree char *syspath = realpath(devpath, NULL); + +if (!syspath) { +error_setg_errno (errp, errno,"realpath(\"%s\")" , devpath); +return false; + } +if (strstr (syspath,"/devices/virtual/block/" )) { +return true; + }else { +return false; + } +} +/* Dispatch to functions for virtual/real device */ static void build_guest_fsinfo_for_device(char const *devpath, GuestFilesystemInfo *fs,@@ -1168,6 +1186,7 @@ static void build_guest_fsinfo_for_device(char const *devpath,g_debug (" parse sysfs path '%s'" , syspath); +/* TODO: use is_disk_virtual() */ if (strstr (syspath,"/devices/virtual/block/" )) {build_guest_fsinfo_for_virtual_device (syspath, fs, errp); }else {@@ -1177,6 +1196,225 @@ static void build_guest_fsinfo_for_device(char const *devpath,free (syspath); } +#ifdef CONFIG_LIBUDEV + +/* +* Wrapper around build_guest_fsinfo_for_device() for getting just +* the disk address. +*/ +static GuestDiskAddress *get_disk_address (const char *syspath,Error **errp) +{ +g_autoptr (GuestFilesystemInfo) fs =NULL ; + + fs =g_new0 (GuestFilesystemInfo,1 ); +build_guest_fsinfo_for_device (syspath, fs, errp); +if (fs->disk !=NULL ) { +return g_steal_pointer (&fs->disk->value); + } +return NULL ; +} + +static char *get_alias_for_syspath (const char *syspath) +{ +struct udev *udev =NULL ; +struct udev_device *udevice =NULL ; +char *ret =NULL ; + + udev =udev_new (); + udevice =udev_device_new_from_syspath (udev, syspath); +if (udev ==NULL || udevice ==NULL ) { +g_debug ("failed to query udev" ); + }else { +const char *alias =udev_device_get_property_value ( + udevice,"DM_NAME" ); +if (alias !=NULL && *alias !=0 ) { + ret =g_strdup (alias); + } + } + +udev_unref (udev); +udev_device_unref (udevice); +return ret; +} + +static char *get_device_for_syspath (const char *syspath) +{ +struct udev *udev =NULL ; +struct udev_device *udevice =NULL ; +char *ret =NULL ; + + udev =udev_new (); + udevice =udev_device_new_from_syspath (udev, syspath); +if (udev ==NULL || udevice ==NULL ) { +g_debug ("failed to query udev" ); + }else { + ret =g_strdup (udev_device_get_devnode (udevice)); + } +udev_unref (udev); +udev_device_unref (udevice); +return ret; +} + +GuestDiskInfoList *qmp_guest_get_disks (Error **errp) +{ +GuestDiskInfoList *item, *ret =NULL ; +GuestDiskInfo *disk, *partition; +DIR *dp =NULL ; +struct dirent *de =NULL ; + +g_debug ("listing /sys/block directory" ); + dp =opendir ("/sys/block" ); +if (dp ==NULL ) { +error_setg_errno (errp, errno,"Can't open directory \"/sys/block\"" ); +return NULL ; + } +while ((de =readdir (dp)) !=NULL ) { + g_autofree char *disk_dir = NULL, *line = NULL, + *size_dir =NULL , *slaves_dir =NULL ; +struct dirent *de_disk, *de_slaves; +DIR *dp_disk =NULL , *dp_slaves =NULL ; +FILE *fp =NULL ; +size_t n =0 ; +Error *local_err =NULL ; +if (de->d_type !=DT_LNK ) { +g_debug (" skipping entry: %s" , de->d_name); +continue ; + } + +/* Check size and skip zero-sized disks */ +g_debug (" checking disk size" ); + size_dir =g_strdup_printf ("/sys/block/%s/size" , de->d_name); + fp =fopen (size_dir,"r" );
qga/commands-posix.c static void build_guest_fsinfo_for_device(char const *devpath, · line 1297
Quoted 10 lines
qga/commands-posix.c +10
-0+if (!fp) { +g_debug (" failed to read disk size" ); +continue ; + } +if (getline (&line, &n, fp) ==-1 ) { +g_debug (" failed to read disk size" ); +fclose (fp); +continue ; + } +fclose (fp);
These 10 lines can be reduced to just
g_file_get_contents(size_dir, &line, NULL, NULL)
Quoted 58 lines
qga/commands-posix.c +58
-0+if (strcmp (line,"0\n" ) ==0 ) { +g_debug (" skipping zero-sized disk" ); +continue ; + } + +g_debug (" adding %s" , de->d_name); + disk_dir =g_strdup_printf ("/sys/block/%s" , de->d_name); + disk =g_new0 (GuestDiskInfo,1 ); + disk->name =get_device_for_syspath (disk_dir); + disk->partition = false; + disk->alias =get_alias_for_syspath (disk_dir); +if (disk->alias !=NULL ) { + disk->has_alias = true; + } + item =g_new0 (GuestDiskInfoList,1 ); + item->value = disk; + item->next = ret; + ret = item; + +/* Get address for non-virtual devices */ +bool is_virtual =is_disk_virtual (disk_dir, &local_err); +if (local_err !=NULL ) { +g_debug (" failed to check disk path, ignoring error: %s" , +error_get_pretty (local_err)); +error_free (local_err); + local_err =NULL ; +/* Don't try to get the address */ + is_virtual = true; + } +if (!is_virtual) { + disk->address =get_disk_address (disk_dir, &local_err); +if (local_err !=NULL ) { +g_debug (" failed to get device info, ignoring error: %s" , +error_get_pretty (local_err)); +error_free (local_err); + local_err =NULL ; + }else if (disk->address !=NULL ) { + disk->has_address = true; + } + } + +/* List slave disks */ + slaves_dir =g_strdup_printf ("%s/slaves" , disk_dir); +g_debug (" listing entries in: %s" , slaves_dir); + dp_slaves =opendir (slaves_dir); +while ((de_slaves =readdir (dp_slaves)) !=NULL ) { + g_autofree char *slave_dir = NULL; +char *slave_dev; +strList *slave_item =NULL ; + +if ((strcmp ("." , de_slaves->d_name) ==0 ) || + (strcmp (".." , de_slaves->d_name) ==0 )) { +continue ; + } + +/* Add slave disks */ + slave_dir =g_strdup_printf ("%s/%s" , + slaves_dir, de_slaves->d_name);
qga/commands-posix.c static void build_guest_fsinfo_for_device(char const *devpath, · line 1365
Quoted 10 lines
qga/commands-posix.c +10
-0+ slave_dev =get_device_for_syspath (slave_dir); +if (slave_dev !=NULL ) { +g_debug (" adding slave device: %s" , slave_dev); + slave_item =g_new0 (strList,1 ); + slave_item->value = slave_dev; + slave_item->next = disk->slaves; + disk->slaves = slave_item; + } + } +closedir (dp_slaves);
Since you are only using d_name, you can use g_dir_open and g_dir_read_name and g_dir_close. This always skips . and .. for you.
Quoted 79 lines
qga/commands-posix.c +54
-7+ +/* +* Detect partitions subdirectory name is "<parent><number>" or +* "<parent>p<number>" +*/ + dp_disk =opendir (disk_dir); +while ((de_disk =readdir (dp_disk)) !=NULL ) { +size_t len; + g_autofree char *partition_dir = NULL; + +if (!(de_disk->d_type &DT_DIR )) { +continue ; + } + + len =strlen (de->d_name); +if (!(strncmp (de->d_name, de_disk->d_name, len) ==0 && + ((*(de_disk->d_name + len) =='p' && +isdigit (*(de_disk->d_name + len +1 ))) || +isdigit (*(de_disk->d_name + len))))) { +continue ; + } + + partition_dir =g_strdup_printf ("%s/%s" , + disk_dir, de_disk->d_name); + partition =g_new0 (GuestDiskInfo,1 ); + partition->name =get_device_for_syspath (partition_dir); + partition->partition = true; +/* Add parent disk as slave for easier tracking of hierarchy */ + partition->slaves =g_new0 (strList,1 ); + partition->slaves->value =g_strdup (disk->name); + + item =g_new0 (GuestDiskInfoList,1 ); + item->value = partition; + item->next = ret; + ret = item; + + } + closedir(dp_disk); + } +return ret; +} + +#else + +GuestDiskInfoList *qmp_guest_get_disks (Error **errp) +{ +error_setg (errp,QERR_UNSUPPORTED ); +return NULL ; +} + +#endif +/* Return a list of the disk device(s)' info which @mount lies on */ static GuestFilesystemInfo *build_guest_fsinfo (struct FsMount *mount,Error **errp)@@ -2809,7 +3047,8 @@ GList *ga_command_blacklist_init(GList *blacklist)const char *list[] = {"guest-get-fsinfo" ,"guest-fsfreeze-status" ,"guest-fsfreeze-freeze" ,"guest-fsfreeze-freeze-list" , -"guest-fsfreeze-thaw" ,"guest-get-fsinfo" ,NULL }; +"guest-fsfreeze-thaw" ,"guest-get-fsinfo" , +"guest-get-disks" ,NULL };char **p = (char **)list;while (*p) {@@ -3042,9 +3281,3 @@ GuestOSInfo *qmp_guest_get_osinfo(Error **errp)return info; } - -GuestDiskInfoList *qmp_guest_get_disks (Error **errp) -{ -error_setg (errp,QERR_UNSUPPORTED ); -return NULL ; -}Signature · 1 line
2.25.0
Regards,
Daniel
Signature · 3 lines
|: https://berrange.com -o- https://www.flickr.com/photos/dberrange :| |: https://libvirt.org -o- https://fstop138.berrange.com :| |: https://entangle-photo.org -o- https://www.instagram.com/dberrange :|
Re: [PATCH v2 1/3] qga: add command guest-get-disks
In reply to Daniel P. BerrangéQuoted 53 lines · Daniel P. Berrangé
Quoted 52 lines · Tomáš Golembiovský
Add API and stubs for new guest-get-disks command.
The command guest-get-fsinfo can be used to list information about disks and partitions but it is limited only to mounted disks with filesystem. This new command should allow listing information about disks of the VM regardles whether they are mounted or not. This can be usefull for management applications for mapping virtualized devices or pass-through devices to device names in the guest OS.
Signed-off-by Tomáš Golembiovský <[email protected]>--- qga/commands-posix.c | 6 ++++++ qga/commands-win32.c | 6 ++++++ qga/qapi-schema.json | 29 +++++++++++++++++++++++++++++ 3 files changed, 41 insertions(+)qga/commands-posix.c +6
-0@@ -3042,3 +3042,9 @@ GuestOSInfo *qmp_guest_get_osinfo(Error **errp)return info; } + +GuestDiskInfoList *qmp_guest_get_disks (Error **errp) +{ +error_setg (errp,QERR_UNSUPPORTED ); +return NULL ; +}qga/commands-win32.c +6
-0@@ -2229,3 +2229,9 @@ GuestOSInfo *qmp_guest_get_osinfo(Error **errp)return info; } + +GuestDiskInfoList *qmp_guest_get_disks (Error **errp) +{ +error_setg (errp,QERR_UNSUPPORTED ); +return NULL ; +}qga/qapi-schema.json +0
-0@@ -862,6 +862,35 @@ 'bus': 'int', 'target': 'int', 'unit': 'int', '*serial': 'str', '*dev': 'str'} }
Quoted 8 lines
qga/qapi-schema.json line 870
Quoted 6 lines
qga/qapi-schema.json +6
-0+## +# @GuestDiskInfo: +# +# @name: device node (Linux) or device UNC (Windows) +# @partition: whether this is a partition or disk +# @slaves: list of slave devices (Linux)What are "slave devices" ?
That is how Linux calls dependent devices. E.g. PVs in your LVM setup are considered "slaves" to your LVs. Or if you have LUKS volume called "foo" on your "bar" drive then "bar" would be listed as a "slave" for "foo".
The dependency is in the opposite direction then I have always pictured it in my had, but I guess that there are reasons for that.
Quoted 2 lines
For that matter, please don't use the term "slaves" at all in any new code.
Fair enough... so how shall we call those devices? Dependents, dependencies, parents... ? Ideas welcome.
Tomas
Quoted 19 lines
qga/qapi-schema.json line 879
Quoted 10 lines
qga/qapi-schema.json +9
-0+# @address: disk address information (only for non-virtual devices) +# @alias: optional alias assigned to the disk, on Linux this is a name assigned +# by device mapper +# +# Since 5.2 +## +{ 'struct': 'GuestDiskInfo', + 'data': {'name': 'str', 'partition': 'bool', 'slaves': ['str'], + '*address': 'GuestDiskAddress', '*alias': 'str'} }Regards,
DanielSignature · 3 lines
|: https://berrange.com -o- https://www.flickr.com/photos/dberrange :| |: https://libvirt.org -o- https://fstop138.berrange.com :| |: https://entangle-photo.org -o- https://www.instagram.com/dberrange :|
Signature · 1 line
Tomáš Golembiovský <[email protected]>
Re: [PATCH v2 1/3] qga: add command guest-get-disks
Quoted 68 lines · Tomáš Golembiovský
Quoted 53 lines · Daniel P. Berrangé
Quoted 52 lines · Tomáš Golembiovský
Add API and stubs for new guest-get-disks command.
The command guest-get-fsinfo can be used to list information about disks and partitions but it is limited only to mounted disks with filesystem. This new command should allow listing information about disks of the VM regardles whether they are mounted or not. This can be usefull for management applications for mapping virtualized devices or pass-through devices to device names in the guest OS.
Signed-off-by Tomáš Golembiovský <[email protected]>--- qga/commands-posix.c | 6 ++++++ qga/commands-win32.c | 6 ++++++ qga/qapi-schema.json | 29 +++++++++++++++++++++++++++++ 3 files changed, 41 insertions(+)qga/commands-posix.c +6
-0@@ -3042,3 +3042,9 @@ GuestOSInfo *qmp_guest_get_osinfo(Error **errp)return info; } + +GuestDiskInfoList *qmp_guest_get_disks (Error **errp) +{ +error_setg (errp,QERR_UNSUPPORTED ); +return NULL ; +}qga/commands-win32.c +6
-0@@ -2229,3 +2229,9 @@ GuestOSInfo *qmp_guest_get_osinfo(Error **errp)return info; } + +GuestDiskInfoList *qmp_guest_get_disks (Error **errp) +{ +error_setg (errp,QERR_UNSUPPORTED ); +return NULL ; +}qga/qapi-schema.json +0
-0@@ -862,6 +862,35 @@ 'bus': 'int', 'target': 'int', 'unit': 'int', '*serial': 'str', '*dev': 'str'} }Quoted 8 lines
qga/qapi-schema.json line 870
Quoted 6 lines
qga/qapi-schema.json +6
-0+## +# @GuestDiskInfo: +# +# @name: device node (Linux) or device UNC (Windows) +# @partition: whether this is a partition or disk +# @slaves: list of slave devices (Linux)What are "slave devices" ?
That is how Linux calls dependent devices. E.g. PVs in your LVM setup are considered "slaves" to your LVs. Or if you have LUKS volume called "foo" on your "bar" drive then "bar" would be listed as a "slave" for "foo".
Quoted 8 lines
The dependency is in the opposite direction then I have always pictured it in my had, but I guess that there are reasons for that.
Quoted 2 lines
For that matter, please don't use the term "slaves" at all in any new code.
Fair enough... so how shall we call those devices? Dependents, dependencies, parents... ? Ideas welcome.
Sounds like "dependents" sounds like a reasonable term for what this is expressing.
Giving the LVM VG/PV and LUKS examples in the QAPI docs would be useful.
Regards,
Daniel
Signature · 3 lines
|: https://berrange.com -o- https://www.flickr.com/photos/dberrange :| |: https://libvirt.org -o- https://fstop138.berrange.com :| |: https://entangle-photo.org -o- https://www.instagram.com/dberrange :|