Skip to contentSkip to conversation

drm/tilcdc: Couple of minor feature improvements

PATCH Superseded Jyri Sarha 2 participants 4 messages Sep 20, 2020 – Sep 29, 2020

Subsystems (3)

v2 of 3 Superseded Latest is v3 →

lore
Share & tools
lore
author
#1 lore raw

PATCH v2 1/2 drm/tilcdc: Do not keep vblank interrupts enabled all the time

In reply to Jyri Sarha

END_OF_FRAME interrupts have been enabled all the time since the beginning of this driver. It is about time to add this feature.

---
 drivers/gpu/drm/tilcdc/tilcdc_crtc.c | 36 +++++++++++++++++++++++++---
 1 file changed, 33 insertions(+), 3 deletions(-)
drivers/gpu/drm/tilcdc/tilcdc_crtc.c +33 -3
index 1856962411c7..29f263e1975a 100644
@@ -147,12 +147,9 @@ static void tilcdc_crtc_enable_irqs(struct drm_device *dev)
 		tilcdc_set(dev, LCDC_RASTER_CTRL_REG,
 			LCDC_V1_SYNC_LOST_INT_ENA | LCDC_V1_FRAME_DONE_INT_ENA |
 			LCDC_V1_UNDERFLOW_INT_ENA);
-		tilcdc_set(dev, LCDC_DMA_CTRL_REG,
-			LCDC_V1_END_OF_FRAME_INT_ENA);
 	} else {
 		tilcdc_write(dev, LCDC_INT_ENABLE_SET_REG,
 			LCDC_V2_UNDERFLOW_INT_ENA |
-			LCDC_V2_END_OF_FRAME0_INT_ENA |
 			LCDC_FRAME_DONE | LCDC_SYNC_LOST);
 	}
 }
@@ -678,11 +675,44 @@ static int tilcdc_crtc_atomic_check(struct drm_crtc *crtc,
 
 static int tilcdc_crtc_enable_vblank(struct drm_crtc *crtc)
 {
+	struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
+	struct drm_device *dev = crtc->dev;
+	struct tilcdc_drm_private *priv = dev->dev_private;
+	unsigned long flags;
+
+	spin_lock_irqsave(&tilcdc_crtc->irq_lock, flags);
+
+	tilcdc_clear_irqstatus(dev, LCDC_END_OF_FRAME0);
+
+	if (priv->rev == 1)
+		tilcdc_set(dev, LCDC_DMA_CTRL_REG,
+			   LCDC_V1_END_OF_FRAME_INT_ENA);
+	else
+		tilcdc_set(dev, LCDC_INT_ENABLE_SET_REG,
+			   LCDC_V2_END_OF_FRAME0_INT_ENA);
+
+	spin_unlock_irqrestore(&tilcdc_crtc->irq_lock, flags);
+
 	return 0;
 }
 
 static void tilcdc_crtc_disable_vblank(struct drm_crtc *crtc)
 {
+	struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
+	struct drm_device *dev = crtc->dev;
+	struct tilcdc_drm_private *priv = dev->dev_private;
+	unsigned long flags;
+
+	spin_lock_irqsave(&tilcdc_crtc->irq_lock, flags);
+
+	if (priv->rev == 1)
+		tilcdc_clear(dev, LCDC_DMA_CTRL_REG,
+			     LCDC_V1_END_OF_FRAME_INT_ENA);
+	else
+		tilcdc_clear(dev, LCDC_INT_ENABLE_SET_REG,
+			     LCDC_V2_END_OF_FRAME0_INT_ENA);
+
+	spin_unlock_irqrestore(&tilcdc_crtc->irq_lock, flags);
 }
 
 static void tilcdc_crtc_reset(struct drm_crtc *crtc)
Signature · 6 lines
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
author
#2 lore raw

PATCH v2 2/2 drm/tilcdc: Remove tilcdc_crtc_max_width(), use private data

In reply to Jyri Sarha

We already have a private data member for maximum display width so let's use it and get rid of the redundant tilcdc_crtc_max_width().

The LCDC version probing is moved to before reading the device tree properties so that the version information is available when private data maximum width is initialized, if "max-width" property is not found.

---
 drivers/gpu/drm/tilcdc/tilcdc_crtc.c | 16 +-----------
 drivers/gpu/drm/tilcdc/tilcdc_drv.c  | 38 +++++++++++++++-------------
 drivers/gpu/drm/tilcdc/tilcdc_drv.h  |  7 ++---
 3 files changed, 26 insertions(+), 35 deletions(-)
drivers/gpu/drm/tilcdc/tilcdc_crtc.c +1 -15
index 29f263e1975a..27ea529d74b8 100644
@@ -754,20 +754,6 @@ static const struct drm_crtc_funcs tilcdc_crtc_funcs = {
 	.disable_vblank	= tilcdc_crtc_disable_vblank,
 };
 
-int tilcdc_crtc_max_width(struct drm_crtc *crtc)
-{
-	struct drm_device *dev = crtc->dev;
-	struct tilcdc_drm_private *priv = dev->dev_private;
-	int max_width = 0;
-
-	if (priv->rev == 1)
-		max_width = 1024;
-	else if (priv->rev == 2)
-		max_width = 2048;
-
-	return max_width;
-}
-
 static enum drm_mode_status
 tilcdc_crtc_mode_valid(struct drm_crtc *crtc,
 		       const struct drm_display_mode *mode)
@@ -780,7 +766,7 @@ tilcdc_crtc_mode_valid(struct drm_crtc *crtc,
 	 * check to see if the width is within the range that
 	 * the LCD Controller physically supports
 	 */
-	if (mode->hdisplay > tilcdc_crtc_max_width(crtc))
+	if (mode->hdisplay > priv->max_width)
 		return MODE_VIRTUAL_X;
 
 	/* width must be multiple of 16 */
drivers/gpu/drm/tilcdc/tilcdc_drv.c +21 -17
index 4f5fc3e87383..866b33b40eff 100644
@@ -105,7 +105,7 @@ static void modeset_init(struct drm_device *dev)
 
 	dev->mode_config.min_width = 0;
 	dev->mode_config.min_height = 0;
-	dev->mode_config.max_width = tilcdc_crtc_max_width(priv->crtc);
+	dev->mode_config.max_width = priv->max_width;
 	dev->mode_config.max_height = 2048;
 	dev->mode_config.funcs = &mode_config_funcs;
 }
@@ -218,22 +218,6 @@ static int tilcdc_init(struct drm_driver *ddrv, struct device *dev)
 		goto init_failed;
 	}
 
-	if (of_property_read_u32(node, "max-bandwidth", &priv->max_bandwidth))
-		priv->max_bandwidth = TILCDC_DEFAULT_MAX_BANDWIDTH;
-
-	DBG("Maximum Bandwidth Value %d", priv->max_bandwidth);
-
-	if (of_property_read_u32(node, "max-width", &priv->max_width))
-		priv->max_width = TILCDC_DEFAULT_MAX_WIDTH;
-
-	DBG("Maximum Horizontal Pixel Width Value %dpixels", priv->max_width);
-
-	if (of_property_read_u32(node, "max-pixelclock",
-					&priv->max_pixelclock))
-		priv->max_pixelclock = TILCDC_DEFAULT_MAX_PIXELCLOCK;
-
-	DBG("Maximum Pixel Clock Value %dKHz", priv->max_pixelclock);
-
 	pm_runtime_enable(dev);
 
 	/* Determine LCD IP Version */
@@ -287,6 +271,26 @@ static int tilcdc_init(struct drm_driver *ddrv, struct device *dev)
 		}
 	}
 
+	if (of_property_read_u32(node, "max-bandwidth", &priv->max_bandwidth))
+		priv->max_bandwidth = TILCDC_DEFAULT_MAX_BANDWIDTH;
+
+	DBG("Maximum Bandwidth Value %d", priv->max_bandwidth);
+
+	if (of_property_read_u32(node, "max-width", &priv->max_width)) {
+		if (priv->rev == 1)
+			priv->max_width = TILCDC_DEFAULT_MAX_WIDTH_V1;
+		else
+			priv->max_width = TILCDC_DEFAULT_MAX_WIDTH_V2;
+	}
+
+	DBG("Maximum Horizontal Pixel Width Value %dpixels", priv->max_width);
+
+	if (of_property_read_u32(node, "max-pixelclock",
+					&priv->max_pixelclock))
+		priv->max_pixelclock = TILCDC_DEFAULT_MAX_PIXELCLOCK;
+
+	DBG("Maximum Pixel Clock Value %dKHz", priv->max_pixelclock);
+
 	ret = tilcdc_crtc_create(ddev);
 	if (ret < 0) {
 		dev_err(dev, "failed to create crtc\n");
drivers/gpu/drm/tilcdc/tilcdc_drv.h +4 -3
index 18815e75ca4f..d29806ca8817 100644
@@ -28,8 +28,10 @@ struct drm_plane;
 
 /* Defaulting to pixel clock defined on AM335x */
 #define TILCDC_DEFAULT_MAX_PIXELCLOCK  126000
-/* Defaulting to max width as defined on AM335x */
-#define TILCDC_DEFAULT_MAX_WIDTH  2048
+/* Maximum display width for LCDC V1 */
+#define TILCDC_DEFAULT_MAX_WIDTH_V1  1024
+/* ... and for LCDC V2 found on AM335x: */
+#define TILCDC_DEFAULT_MAX_WIDTH_V2  2048
 /*
  * This may need some tweaking, but want to allow at least 1280x1024@60
  * with optimized DDR & EMIF settings tweaked 1920x1080@24 appears to
@@ -158,7 +160,6 @@ void tilcdc_crtc_set_panel_info(struct drm_crtc *crtc,
 		const struct tilcdc_panel_info *info);
 void tilcdc_crtc_set_simulate_vesa_sync(struct drm_crtc *crtc,
 					bool simulate_vesa_sync);
-int tilcdc_crtc_max_width(struct drm_crtc *crtc);
 void tilcdc_crtc_shutdown(struct drm_crtc *crtc);
 int tilcdc_crtc_update_fb(struct drm_crtc *crtc,
 		struct drm_framebuffer *fb,
Signature · 6 lines
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Jyri Sarha

author
#0 lore raw

v2 cover drm/tilcdc: Couple of minor feature improvements

Since first version.
- "drm/tilcdc: Do not keep vblank interrupts enabled all the time"
- Add reviewed-by tags
- "drm/tilcdc: Remove tilcdc_crtc_max_width(), use private data"
- Put TILCDC_DEFAULT_MAX_WIDTH_V1 before *_V2 and

The vblank interrupts have been always on when the display is on for a very long time, so I decided that it is about time to fix it. Then the following patch is just a cleanup.

BR,
Jyri

Jyri Sarha (2):
drm/tilcdc: Do not keep vblank interrupts enabled all the time drm/tilcdc: Remove tilcdc_crtc_max_width(), use private data

 drivers/gpu/drm/tilcdc/tilcdc_crtc.c | 52 ++++++++++++++++++----------
 drivers/gpu/drm/tilcdc/tilcdc_drv.c  | 38 +++++++++++---------
 drivers/gpu/drm/tilcdc/tilcdc_drv.h  |  7 ++--
 3 files changed, 59 insertions(+), 38 deletions(-)
Signature · 6 lines
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
Reviewed-by on v2 2/2
#3 lore raw

Re: [PATCH v2 2/2] drm/tilcdc: Remove tilcdc_crtc_max_width(), use private data

In reply to Jyri Sarha
Quoted 8 lines · Jyri Sarha

We already have a private data member for maximum display width so let's use it and get rid of the redundant tilcdc_crtc_max_width().

The LCDC version probing is moved to before reading the device tree properties so that the version information is available when private data maximum width is initialized, if "max-width" property is not found.

Quoted 6 lines
---
 drivers/gpu/drm/tilcdc/tilcdc_crtc.c | 16 +-----------
 drivers/gpu/drm/tilcdc/tilcdc_drv.c  | 38 +++++++++++++++-------------
 drivers/gpu/drm/tilcdc/tilcdc_drv.h  |  7 ++---
 3 files changed, 26 insertions(+), 35 deletions(-)

Tomi

Signature · 6 lines
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel