Skip to contentSkip to conversation

ARM: dts: BCM5301X: Linksys EA9500 add port 5 and port 7

PATCH Applied Vivek Unune 2 participants 5 messages Oct 14, 2020 – Oct 22, 2020 1 message not in the archive Device tree bindings

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): [email protected]

#1 lore raw

PATCH 1/1 ARM: dts: BCM5301X: Linksys EA9500 add port 5 and port 7

Add ports 5 and 7 which are connected to gmac cores 1 & 2. These will be disabled for now.

---
 .../boot/dts/bcm47094-linksys-panamera.dts    | 24 +++++++++++++++++++
 1 file changed, 24 insertions(+)
arch/arm/boot/dts/bcm47094-linksys-panamera.dts +24 -0
index 9fcd215177d7..0ff502d5aa0c 100644
@@ -242,6 +242,30 @@ port@4 {
 			label = "wan";
 		};
 
+		port@5 {
+			reg = <5>;
+			ethernet = <&gmac0>;
+			label = "cpu";
+			status = "disabled";
+
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+
+		port@7 {
+			reg = <7>;
+			ethernet = <&gmac1>;
+			label = "cpu";
+			status = "disabled";
+
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+
 		port@8 {
 			reg = <8>;
 			ethernet = <&gmac2>;
Signature · 1 line
2.25.1
#2 lore raw
Quoted 46 lines · Vivek Unune

Add ports 5 and 7 which are connected to gmac cores 1 & 2. These will be disabled for now.

---
 .../boot/dts/bcm47094-linksys-panamera.dts    | 24 +++++++++++++++++++
 1 file changed, 24 insertions(+)
arch/arm/boot/dts/bcm47094-linksys-panamera.dts +24 -0
index 9fcd215177d7..0ff502d5aa0c 100644
@@ -242,6 +242,30 @@ port@4 {
 			label = "wan";
 		};
 
+		port@5 {
+			reg = <5>;
+			ethernet = <&gmac0>;
+			label = "cpu";
+			status = "disabled";
+
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+
+		port@7 {
+			reg = <7>;
+			ethernet = <&gmac1>;
+			label = "cpu";
+			status = "disabled";
+
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+
 		port@8 {
 			reg = <8>;
 			ethernet = <&gmac2>;
Signature · 1 line
2.25.1

Any feedback?

Thanks!

Vivek

#3 lore raw
Quoted 41 lines · Vivek Unune
Quoted 40 lines · Vivek Unune

Add ports 5 and 7 which are connected to gmac cores 1 & 2. These will be disabled for now.

---
 .../boot/dts/bcm47094-linksys-panamera.dts    | 24 +++++++++++++++++++
 1 file changed, 24 insertions(+)
arch/arm/boot/dts/bcm47094-linksys-panamera.dts +24 -0
index 9fcd215177d7..0ff502d5aa0c 100644
@@ -242,6 +242,30 @@ port@4 {
 			label = "wan";
 		};
 
+		port@5 {
+			reg = <5>;
+			ethernet = <&gmac0>;
+			label = "cpu";
+			status = "disabled";
+
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+
+		port@7 {
+			reg = <7>;
+			ethernet = <&gmac1>;
+			label = "cpu";
+			status = "disabled";
+
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+
Quoted 8 lines
Quoted 6 lines
arch/arm/boot/dts/bcm47094-linksys-panamera.dts +0 -0
 		port@8 {
 			reg = <8>;
 			ethernet = <&gmac2>;
Signature · 1 line
2.25.1

Any feedback?

Going through my queue of patches, I should be able to apply this patch soon.

Signature · 1 line
Florian
#4 lore raw
Quoted 51 lines · Florian Fainelli
Quoted 41 lines · Vivek Unune
Quoted 40 lines · Vivek Unune

Add ports 5 and 7 which are connected to gmac cores 1 & 2. These will be disabled for now.

---
 .../boot/dts/bcm47094-linksys-panamera.dts    | 24 +++++++++++++++++++
 1 file changed, 24 insertions(+)
arch/arm/boot/dts/bcm47094-linksys-panamera.dts +24 -0
index 9fcd215177d7..0ff502d5aa0c 100644
@@ -242,6 +242,30 @@ port@4 {
 			label = "wan";
 		};
 
+		port@5 {
+			reg = <5>;
+			ethernet = <&gmac0>;
+			label = "cpu";
+			status = "disabled";
+
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+
+		port@7 {
+			reg = <7>;
+			ethernet = <&gmac1>;
+			label = "cpu";
+			status = "disabled";
+
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+
Quoted 8 lines
Quoted 6 lines
arch/arm/boot/dts/bcm47094-linksys-panamera.dts +0 -0
 		port@8 {
 			reg = <8>;
 			ethernet = <&gmac2>;
Signature · 1 line
2.25.1

Any feedback?

Quoted 2 lines

Going through my queue of patches, I should be able to apply this patch soon.

Hi Florian,

Thanks for quick response!

-Vivek