ARM: dts: BCM5301X: Linksys EA9500 add port 5 and port 7
PATCH 1/1 ARM: dts: BCM5301X: Linksys EA9500 add port 5 and port 7
In reply to a message not in the archiveAdd ports 5 and 7 which are connected to gmac cores 1 & 2. These will be disabled for now.
--- .../boot/dts/bcm47094-linksys-panamera.dts | 24 +++++++++++++++++++ 1 file changed, 24 insertions(+)
arch/arm/boot/dts/bcm47094-linksys-panamera.dts +24 -0
@@ -242,6 +242,30 @@ port@4 { label = "wan"; }; + port@5 { + reg = <5>; + ethernet = <&gmac0>; + label = "cpu"; + status = "disabled"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + port@7 { + reg = <7>; + ethernet = <&gmac1>; + label = "cpu"; + status = "disabled"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + port@8 { reg = <8>; ethernet = <&gmac2>;
Signature · 1 line
2.25.1
Quoted 46 lines · Vivek Unune
Add ports 5 and 7 which are connected to gmac cores 1 & 2. These will be disabled for now.
Signed-off-by Vivek Unune <[email protected]>--- .../boot/dts/bcm47094-linksys-panamera.dts | 24 +++++++++++++++++++ 1 file changed, 24 insertions(+)arch/arm/boot/dts/bcm47094-linksys-panamera.dts +24
-0@@ -242,6 +242,30 @@ port@4 { label = "wan"; }; + port@5 { + reg = <5>; + ethernet = <&gmac0>; + label = "cpu"; + status = "disabled"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + port@7 { + reg = <7>; + ethernet = <&gmac1>; + label = "cpu"; + status = "disabled"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + port@8 { reg = <8>; ethernet = <&gmac2>;Signature · 1 line
2.25.1
Any feedback?
Thanks!
Vivek
Quoted 41 lines · Vivek Unune
Quoted 40 lines · Vivek Unune
Add ports 5 and 7 which are connected to gmac cores 1 & 2. These will be disabled for now.
Signed-off-by Vivek Unune <[email protected]>--- .../boot/dts/bcm47094-linksys-panamera.dts | 24 +++++++++++++++++++ 1 file changed, 24 insertions(+)arch/arm/boot/dts/bcm47094-linksys-panamera.dts +24
-0@@ -242,6 +242,30 @@ port@4 { label = "wan"; }; + port@5 { + reg = <5>; + ethernet = <&gmac0>; + label = "cpu"; + status = "disabled"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + port@7 { + reg = <7>; + ethernet = <&gmac1>; + label = "cpu"; + status = "disabled"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; +
Quoted 8 lines
Quoted 6 lines
arch/arm/boot/dts/bcm47094-linksys-panamera.dts +0
-0port@8 { reg = <8>; ethernet = <&gmac2>;Signature · 1 line
2.25.1Any feedback?
Going through my queue of patches, I should be able to apply this patch soon.
Signature · 1 line
Florian
Quoted 51 lines · Florian Fainelli
Quoted 41 lines · Vivek Unune
Quoted 40 lines · Vivek Unune
Add ports 5 and 7 which are connected to gmac cores 1 & 2. These will be disabled for now.
Signed-off-by Vivek Unune <[email protected]>--- .../boot/dts/bcm47094-linksys-panamera.dts | 24 +++++++++++++++++++ 1 file changed, 24 insertions(+)arch/arm/boot/dts/bcm47094-linksys-panamera.dts +24
-0@@ -242,6 +242,30 @@ port@4 { label = "wan"; }; + port@5 { + reg = <5>; + ethernet = <&gmac0>; + label = "cpu"; + status = "disabled"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + port@7 { + reg = <7>; + ethernet = <&gmac1>; + label = "cpu"; + status = "disabled"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; +Quoted 8 lines
Quoted 6 lines
arch/arm/boot/dts/bcm47094-linksys-panamera.dts +0
-0port@8 { reg = <8>; ethernet = <&gmac2>;Signature · 1 line
2.25.1Any feedback?
Quoted 2 lines
Going through my queue of patches, I should be able to apply this patch soon.
Hi Florian,
Thanks for quick response!
-Vivek
Florian Fainelli
AppliedQuoted 5 lines · Vivek Unune
Add ports 5 and 7 which are connected to gmac cores 1 & 2. These will be disabled for now.
Signed-off-by Vivek Unune <[email protected]>---
Applied to devicetree/next, thanks!
--
Florian