replication: Properly attach children
v3 cover replication: Properly attach children
Hello Everyone,
A while ago Kevin noticed that the replication driver doesn't properly attach the children it wants to use. Instead, it directly copies the BdrvChilds from it's backing file, which is wrong. Ths Patchset fixes the problem and removes the workaround that was put in place back then.
Regards,
Lukas Straub
Changes:
-v3:
-Split up into multiple patches
-Remove s->active_disk
-Clarify child permissions in commit message
-v2: Test for BDRV_CHILD_PRIMARY in replication_child_perm, since
bs->file might not be set yet. (Vladimir)
Lukas Straub (4):
replication: Remove s->active_disk
replication: Reduce usage of s->hidden_disk and s->secondary_disk
replication: Properly attach children
replication: Remove workaround
block/replication.c | 115 +++++++++++++++++++++++++++----------------- 1 file changed, 72 insertions(+), 43 deletions(-)
--
2.20.1
PATCH v3 1/4 replication: Remove s->active_disk
s->active_disk is bs->file. Remove it and use local variables instead.
--- block/replication.c | 38 +++++++++++++++++++++----------------- 1 file changed, 21 insertions(+), 17 deletions(-)
block/replication.c +21 -17
@@ -35,7 +35,6 @@ typedef enum { typedef struct BDRVReplicationState { ReplicationMode mode; ReplicationStage stage; - BdrvChild *active_disk; BlockJob *commit_job; BdrvChild *hidden_disk; BdrvChild *secondary_disk;
@@ -307,11 +306,15 @@ out:return ret; } -static void secondary_do_checkpoint (BDRVReplicationState *s,Error **errp) +static void secondary_do_checkpoint (BlockDriverState *bs,Error **errp) { +BDRVReplicationState *s = bs->opaque; +BdrvChild *active_disk;Error *local_err =NULL ;int ret; + active_disk = bs->file; +if (!s->backup_job) {error_setg (errp,"Backup job was cancelled unexpectedly" );return ;
@@ -323,13 +326,13 @@ static void secondary_do_checkpoint(BDRVReplicationState *s, Error **errp)return ; } -if (!s->active_disk->bs->drv) { +if (!active_disk->bs->drv) {error_setg (errp,"Active disk %s is ejected" , - s->active_disk->bs->node_name); + active_disk->bs->node_name);return ; } - ret =bdrv_make_empty (s->active_disk, errp); + ret =bdrv_make_empty (active_disk, errp);if (ret <0 ) {return ; }
@@ -451,6 +454,7 @@ static void replication_start(ReplicationState *rs, ReplicationMode mode,BlockDriverState *bs = rs->opaque;BDRVReplicationState *s;BlockDriverState *top_bs; +BdrvChild *active_disk;int64_t active_length, hidden_length, disk_length;AioContext *aio_context;Error *local_err =NULL ;
@@ -488,15 +492,14 @@ static void replication_start(ReplicationState *rs, ReplicationMode mode,case REPLICATION_MODE_PRIMARY :break ;case REPLICATION_MODE_SECONDARY : - s->active_disk = bs->file; -if (!s->active_disk || !s->active_disk->bs || - !s->active_disk->bs->backing) { + active_disk = bs->file; +if (!active_disk || !active_disk->bs || !active_disk->bs->backing) {error_setg (errp,"Active disk doesn't have backing file" );aio_context_release (aio_context);return ; } - s->hidden_disk = s->active_disk->bs->backing; + s->hidden_disk = active_disk->bs->backing;if (!s->hidden_disk->bs || !s->hidden_disk->bs->backing) {error_setg (errp,"Hidden disk doesn't have backing file" );aio_context_release (aio_context);
@@ -511,7 +514,7 @@ static void replication_start(ReplicationState *rs, ReplicationMode mode, }/* verify the length */ - active_length =bdrv_getlength (s->active_disk->bs); + active_length =bdrv_getlength (active_disk->bs); hidden_length =bdrv_getlength (s->hidden_disk->bs); disk_length =bdrv_getlength (s->secondary_disk->bs); if (active_length < 0 || hidden_length < 0 || disk_length < 0 ||
@@ -523,9 +526,9 @@ static void replication_start(ReplicationState *rs, ReplicationMode mode, }/* Must be true, or the bdrv_getlength() calls would have failed */ -assert (s->active_disk->bs->drv && s->hidden_disk->bs->drv); +assert (active_disk->bs->drv && s->hidden_disk->bs->drv); -if (!s->active_disk->bs->drv->bdrv_make_empty || +if (!active_disk->bs->drv->bdrv_make_empty || !s->hidden_disk->bs->drv->bdrv_make_empty) {error_setg (errp,"Active disk or hidden disk doesn't support make_empty" );
@@ -579,7 +582,7 @@ static void replication_start(ReplicationState *rs, ReplicationMode mode, s->stage =BLOCK_REPLICATION_RUNNING ;if (s->mode ==REPLICATION_MODE_SECONDARY ) { -secondary_do_checkpoint (s, errp); +secondary_do_checkpoint (bs, errp); } s->error =0 ;
@@ -608,7 +611,7 @@ static void replication_do_checkpoint(ReplicationState *rs, Error **errp) }if (s->mode ==REPLICATION_MODE_SECONDARY ) { -secondary_do_checkpoint (s, errp); +secondary_do_checkpoint (bs, errp); }aio_context_release (aio_context); }
@@ -645,7 +648,6 @@ static void replication_done(void *opaque, int ret)if (ret ==0 ) { s->stage =BLOCK_REPLICATION_DONE ; - s->active_disk =NULL ; s->secondary_disk =NULL ; s->hidden_disk =NULL ; s->error =0 ;
@@ -659,11 +661,13 @@ static void replication_stop(ReplicationState *rs, bool failover, Error **errp) {BlockDriverState *bs = rs->opaque;BDRVReplicationState *s; +BdrvChild *active_disk;AioContext *aio_context; aio_context =bdrv_get_aio_context (bs);aio_context_acquire (aio_context); s = bs->opaque; + active_disk = bs->file;if (s->stage ==BLOCK_REPLICATION_DONE || s->stage ==BLOCK_REPLICATION_FAILOVER ) {
@@ -698,7 +702,7 @@ static void replication_stop(ReplicationState *rs, bool failover, Error **errp) }if (!failover) { -secondary_do_checkpoint (s, errp); +secondary_do_checkpoint (bs, errp); s->stage =BLOCK_REPLICATION_DONE ;aio_context_release (aio_context);return ;
@@ -706,7 +710,7 @@ static void replication_stop(ReplicationState *rs, bool failover, Error **errp) s->stage =BLOCK_REPLICATION_FAILOVER ; s->commit_job =commit_active_start ( -NULL , s->active_disk->bs, s->secondary_disk->bs, +NULL , active_disk->bs, s->secondary_disk->bs,JOB_INTERNAL ,0 ,BLOCKDEV_ON_ERROR_REPORT ,NULL , replication_done, bs, true, errp);break ;
--
2.20.1
PATCH v3 2/4 replication: Reduce usage of s->hidden_disk and s->secondary_disk
In reply to Lukas StraubIn preparation for the next patch, initialize s->hidden_disk and s->secondary_disk later and replace access to them with local variables in the places where they aren't initialized yet.
--- block/replication.c | 45 ++++++++++++++++++++++++++++----------------- 1 file changed, 28 insertions(+), 17 deletions(-)
block/replication.c +28 -17
@@ -368,27 +368,35 @@ static void reopen_backing_file(BlockDriverState *bs, bool writable, Error **errp) {BDRVReplicationState *s = bs->opaque; +BdrvChild *hidden_disk, *secondary_disk;BlockReopenQueue *reopen_queue =NULL ; +/* +* s->hidden_disk and s->secondary_disk may not be set yet, as they will +* only be set after the children are writable. +*/ + hidden_disk = bs->file->bs->backing; + secondary_disk = hidden_disk->bs->backing; +if (writable) { - s->orig_hidden_read_only =bdrv_is_read_only (s->hidden_disk->bs); - s->orig_secondary_read_only =bdrv_is_read_only (s->secondary_disk->bs); + s->orig_hidden_read_only =bdrv_is_read_only (hidden_disk->bs); + s->orig_secondary_read_only =bdrv_is_read_only (secondary_disk->bs); } -bdrv_subtree_drained_begin (s->hidden_disk->bs); -bdrv_subtree_drained_begin (s->secondary_disk->bs); +bdrv_subtree_drained_begin (hidden_disk->bs); +bdrv_subtree_drained_begin (secondary_disk->bs);if (s->orig_hidden_read_only) {QDict *opts =qdict_new ();qdict_put_bool (opts,BDRV_OPT_READ_ONLY , !writable); - reopen_queue =bdrv_reopen_queue (reopen_queue, s->hidden_disk->bs, + reopen_queue =bdrv_reopen_queue (reopen_queue, hidden_disk->bs, opts, true); }if (s->orig_secondary_read_only) {QDict *opts =qdict_new ();qdict_put_bool (opts,BDRV_OPT_READ_ONLY , !writable); - reopen_queue =bdrv_reopen_queue (reopen_queue, s->secondary_disk->bs, + reopen_queue =bdrv_reopen_queue (reopen_queue, secondary_disk->bs, opts, true); }
@@ -396,8 +404,8 @@ static void reopen_backing_file(BlockDriverState *bs, bool writable,bdrv_reopen_multiple (reopen_queue, errp); } -bdrv_subtree_drained_end (s->hidden_disk->bs); -bdrv_subtree_drained_end (s->secondary_disk->bs); +bdrv_subtree_drained_end (hidden_disk->bs); +bdrv_subtree_drained_end (secondary_disk->bs); }static void backup_job_cleanup (BlockDriverState *bs)
@@ -454,7 +462,7 @@ static void replication_start(ReplicationState *rs, ReplicationMode mode,BlockDriverState *bs = rs->opaque;BDRVReplicationState *s;BlockDriverState *top_bs; -BdrvChild *active_disk; +BdrvChild *active_disk, *hidden_disk, *secondary_disk;int64_t active_length, hidden_length, disk_length;AioContext *aio_context;Error *local_err =NULL ;
@@ -499,15 +507,15 @@ static void replication_start(ReplicationState *rs, ReplicationMode mode,return ; } - s->hidden_disk = active_disk->bs->backing; -if (!s->hidden_disk->bs || !s->hidden_disk->bs->backing) { + hidden_disk = active_disk->bs->backing; +if (!hidden_disk->bs || !hidden_disk->bs->backing) {error_setg (errp,"Hidden disk doesn't have backing file" );aio_context_release (aio_context);return ; } - s->secondary_disk = s->hidden_disk->bs->backing; -if (!s->secondary_disk->bs || !bdrv_has_blk (s->secondary_disk->bs)) { + secondary_disk = hidden_disk->bs->backing; +if (!secondary_disk->bs || !bdrv_has_blk (secondary_disk->bs)) {error_setg (errp,"The secondary disk doesn't have block backend" );aio_context_release (aio_context);return ;
@@ -515,8 +523,8 @@ static void replication_start(ReplicationState *rs, ReplicationMode mode,/* verify the length */ active_length =bdrv_getlength (active_disk->bs); - hidden_length =bdrv_getlength (s->hidden_disk->bs); - disk_length =bdrv_getlength (s->secondary_disk->bs); + hidden_length =bdrv_getlength (hidden_disk->bs); + disk_length =bdrv_getlength (secondary_disk->bs);if (active_length <0 || hidden_length <0 || disk_length <0 || active_length != hidden_length || hidden_length != disk_length) { error_setg(errp, "Active disk, hidden disk, secondary disk's length"
@@ -526,10 +534,10 @@ static void replication_start(ReplicationState *rs, ReplicationMode mode, }/* Must be true, or the bdrv_getlength() calls would have failed */ -assert (active_disk->bs->drv && s->hidden_disk->bs->drv); +assert (active_disk->bs->drv && hidden_disk->bs->drv);if (!active_disk->bs->drv->bdrv_make_empty || - !s->hidden_disk->bs->drv->bdrv_make_empty) { + !hidden_disk->bs->drv->bdrv_make_empty) {error_setg (errp,"Active disk or hidden disk doesn't support make_empty" );aio_context_release (aio_context);
@@ -544,6 +552,9 @@ static void replication_start(ReplicationState *rs, ReplicationMode mode,return ; } + s->hidden_disk = hidden_disk; + s->secondary_disk = secondary_disk; +/* start backup job now */ error_setg (&s->blocker,"Block device is in use by internal backup job" );
--
2.20.1
PATCH v3 4/4 replication: Remove workaround
In reply to Lukas StraubRemove the workaround introduced in commit 6ecbc6c52672db5c13805735ca02784879ce8285 "replication: Avoid blk_make_empty() on read-only child".
It is not needed anymore since s->hidden_disk is guaranteed to be writable when secondary_do_checkpoint() runs. Because replication_start(), _do_checkpoint() and _stop() are only called by COLO migration code and COLO-migration doesn't inactivate disks.
--- block/replication.c | 12 +----------- 1 file changed, 1 insertion(+), 11 deletions(-)
block/replication.c +1 -11
@@ -348,17 +348,7 @@ static void secondary_do_checkpoint(BlockDriverState *bs, Error **errp)return ; } -BlockBackend *blk =blk_new (qemu_get_current_aio_context (), -BLK_PERM_WRITE ,BLK_PERM_ALL ); -blk_insert_bs (blk, s->hidden_disk->bs, &local_err); -if (local_err) { -error_propagate (errp, local_err); -blk_unref (blk); -return ; - } - - ret =blk_make_empty (blk, errp); -blk_unref (blk); + ret =bdrv_make_empty (s->hidden_disk, errp);if (ret <0 ) {return ; }
--
2.20.1
PATCH v3 3/4 replication: Properly attach children
In reply to Lukas StraubThe replication driver needs access to the children block-nodes of it's child so it can issue bdrv_make_empty() and bdrv_co_pwritev() to manage the replication. However, it does this by directly copying the BdrvChilds, which is wrong.
Fix this by properly attaching the block-nodes with bdrv_attach_child() and requesting the required permissions.
--- block/replication.c | 30 +++++++++++++++++++++++++++--- 1 file changed, 27 insertions(+), 3 deletions(-)
block/replication.c +27 -3
@@ -165,7 +165,12 @@ static void replication_child_perm(BlockDriverState *bs, BdrvChild *c, uint64_t perm, uint64_t shared, uint64_t *nperm, uint64_t *nshared) { - *nperm =BLK_PERM_CONSISTENT_READ ; + if (role & BDRV_CHILD_PRIMARY) { + *nperm =BLK_PERM_CONSISTENT_READ ; + } else { + *nperm =0 ; + } +if ((bs->open_flags & (BDRV_O_INACTIVE |BDRV_O_RDWR )) ==BDRV_O_RDWR ) { *nperm |=BLK_PERM_WRITE ; }
@@ -552,8 +557,25 @@ static void replication_start(ReplicationState *rs, ReplicationMode mode,return ; } - s->hidden_disk = hidden_disk; - s->secondary_disk = secondary_disk; +bdrv_ref (hidden_disk->bs); + s->hidden_disk =bdrv_attach_child (bs, hidden_disk->bs,"hidden disk" , + &child_of_bds,BDRV_CHILD_DATA , + &local_err); +if (local_err) { +error_propagate (errp, local_err); +aio_context_release (aio_context); +return ; + } + +bdrv_ref (secondary_disk->bs); + s->secondary_disk =bdrv_attach_child (bs, secondary_disk->bs, +"secondary disk" , &child_of_bds, +BDRV_CHILD_DATA , &local_err); +if (local_err) { +error_propagate (errp, local_err); +aio_context_release (aio_context); +return ; + }/* start backup job now */ error_setg(&s->blocker,
@@ -659,7 +681,9 @@ static void replication_done(void *opaque, int ret)if (ret ==0 ) { s->stage =BLOCK_REPLICATION_DONE ; +bdrv_unref_child (bs, s->secondary_disk); s->secondary_disk =NULL ; +bdrv_unref_child (bs, s->hidden_disk); s->hidden_disk =NULL ; s->error =0 ; }else {
--
2.20.1
Re: [PATCH v3 1/4] replication: Remove s->active_disk
In reply to Lukas StraubQuoted 20 lines · Lukas Straub
s->active_diskisbs->file. Remove it and use local variables instead.Signed-off-by Lukas Straub <[email protected]>--- block/replication.c | 38 +++++++++++++++++++++----------------- 1 file changed, 21 insertions(+), 17 deletions(-)block/replication.c +0
-1@@ -35,7 +35,6 @@ typedef enum { typedef struct BDRVReplicationState { ReplicationMode mode; ReplicationStage stage; - BdrvChild *active_disk; BlockJob *commit_job; BdrvChild *hidden_disk; BdrvChild *secondary_disk;
block/replication.c out: · line 312
Quoted 8 lines
block/replication.c +3
-1@@ -307,11 +306,15 @@ out:return ret; } -static void secondary_do_checkpoint (BDRVReplicationState *s,Error **errp) +static void secondary_do_checkpoint (BlockDriverState *bs,Error **errp) { +BDRVReplicationState *s = bs->opaque; +BdrvChild *active_disk;
Why not to combine initialization into definition:
BdrvChild *active_disk = bs->file;
Quoted 34 lines
block/replication.c +6
-3Error *local_err =NULL ;int ret; + active_disk = bs->file; +if (!s->backup_job) {error_setg (errp,"Backup job was cancelled unexpectedly" );return ;@@ -323,13 +326,13 @@ static void secondary_do_checkpoint(BDRVReplicationState *s, Error **errp)return ; } -if (!s->active_disk->bs->drv) { +if (!active_disk->bs->drv) {error_setg (errp,"Active disk %s is ejected" , - s->active_disk->bs->node_name); + active_disk->bs->node_name);return ; } - ret =bdrv_make_empty (s->active_disk, errp); + ret =bdrv_make_empty (active_disk, errp);if (ret <0 ) {return ; }@@ -451,6 +454,7 @@ static void replication_start(ReplicationState *rs, ReplicationMode mode,BlockDriverState *bs = rs->opaque;BDRVReplicationState *s;BlockDriverState *top_bs; +BdrvChild *active_disk;int64_t active_length, hidden_length, disk_length;AioContext *aio_context;Error *local_err =NULL ;
block/replication.c static void replication_start(ReplicationState *rs, ReplicationMode mode, · line 495
Quoted 7 lines
block/replication.c +1
-3@@ -488,15 +492,14 @@ static void replication_start(ReplicationState *rs, ReplicationMode mode,case REPLICATION_MODE_PRIMARY :break ;case REPLICATION_MODE_SECONDARY : - s->active_disk = bs->file; -if (!s->active_disk || !s->active_disk->bs || - !s->active_disk->bs->backing) { + active_disk = bs->file;
Here initializing active_disk only here makes sense: we consider "active disk" only in secondary mode. Right?
Quoted 82 lines
block/replication.c +10
-8+if (!active_disk || !active_disk->bs || !active_disk->bs->backing) {error_setg (errp,"Active disk doesn't have backing file" );aio_context_release (aio_context);return ; } - s->hidden_disk = s->active_disk->bs->backing; + s->hidden_disk = active_disk->bs->backing;if (!s->hidden_disk->bs || !s->hidden_disk->bs->backing) {error_setg (errp,"Hidden disk doesn't have backing file" );aio_context_release (aio_context);@@ -511,7 +514,7 @@ static void replication_start(ReplicationState *rs, ReplicationMode mode, }/* verify the length */ - active_length =bdrv_getlength (s->active_disk->bs); + active_length =bdrv_getlength (active_disk->bs); hidden_length =bdrv_getlength (s->hidden_disk->bs); disk_length =bdrv_getlength (s->secondary_disk->bs); if (active_length < 0 || hidden_length < 0 || disk_length < 0 ||@@ -523,9 +526,9 @@ static void replication_start(ReplicationState *rs, ReplicationMode mode, }/* Must be true, or the bdrv_getlength() calls would have failed */ -assert (s->active_disk->bs->drv && s->hidden_disk->bs->drv); +assert (active_disk->bs->drv && s->hidden_disk->bs->drv); -if (!s->active_disk->bs->drv->bdrv_make_empty || +if (!active_disk->bs->drv->bdrv_make_empty || !s->hidden_disk->bs->drv->bdrv_make_empty) {error_setg (errp,"Active disk or hidden disk doesn't support make_empty" );@@ -579,7 +582,7 @@ static void replication_start(ReplicationState *rs, ReplicationMode mode, s->stage =BLOCK_REPLICATION_RUNNING ;if (s->mode ==REPLICATION_MODE_SECONDARY ) { -secondary_do_checkpoint (s, errp); +secondary_do_checkpoint (bs, errp); } s->error =0 ;@@ -608,7 +611,7 @@ static void replication_do_checkpoint(ReplicationState *rs, Error **errp) }if (s->mode ==REPLICATION_MODE_SECONDARY ) { -secondary_do_checkpoint (s, errp); +secondary_do_checkpoint (bs, errp); }aio_context_release (aio_context); }@@ -645,7 +648,6 @@ static void replication_done(void *opaque, int ret)if (ret ==0 ) { s->stage =BLOCK_REPLICATION_DONE ; - s->active_disk =NULL ; s->secondary_disk =NULL ; s->hidden_disk =NULL ; s->error =0 ;@@ -659,11 +661,13 @@ static void replication_stop(ReplicationState *rs, bool failover, Error **errp) {BlockDriverState *bs = rs->opaque;BDRVReplicationState *s; +BdrvChild *active_disk;AioContext *aio_context; aio_context =bdrv_get_aio_context (bs);aio_context_acquire (aio_context); s = bs->opaque; + active_disk = bs->file;if (s->stage ==BLOCK_REPLICATION_DONE || s->stage ==BLOCK_REPLICATION_FAILOVER ) {@@ -698,7 +702,7 @@ static void replication_stop(ReplicationState *rs, bool failover, Error **errp) }if (!failover) { -secondary_do_checkpoint (s, errp); +secondary_do_checkpoint (bs, errp); s->stage =BLOCK_REPLICATION_DONE ;aio_context_release (aio_context);return ;
block/replication.c static void replication_stop(ReplicationState *rs, bool failover, Error **errp) · line 711
Quoted 2 lines
block/replication.c +0
-0@@ -706,7 +710,7 @@ static void replication_stop(ReplicationState *rs, bool failover, Error **errp) s->stage =BLOCK_REPLICATION_FAILOVER ;
For consistency, it seems right to initialize active_disk only in "case REPLICATION_MODE_SECONDARY:", like above..
But then, it becomes obvious that no sense in creating additional variable to use it once.. So here I'd just use bs->file->bs
Quoted 9 lines
block/replication.c +1
-2s->commit_job =commit_active_start ( -NULL , s->active_disk->bs, s->secondary_disk->bs, +NULL , active_disk->bs, s->secondary_disk->bs,JOB_INTERNAL ,0 ,BLOCKDEV_ON_ERROR_REPORT ,NULL , replication_done, bs, true, errp);break ; --2.20.1
Anyway:
Signature · 2 lines
Best regards, Vladimir
Re: [PATCH v3 2/4] replication: Reduce usage of s->hidden_disk and s->secondary_disk
In reply to Lukas StraubQuoted 5 lines · Lukas Straub
In preparation for the next patch, initialize
s->hidden_diskands->secondary_disklater and replace access to them with local variables in the places where they aren't initialized yet.Signed-off-by Lukas Straub<[email protected]>
Signature · 2 lines
Best regards, Vladimir
Quoted 46 lines · Lukas Straub
The replication driver needs access to the children block-nodes of it's child so it can issue
bdrv_make_empty()andbdrv_co_pwritev()to manage the replication. However, it does this by directly copying the BdrvChilds, which is wrong.Fix this by properly attaching the block-nodes with
bdrv_attach_child()and requesting the required permissions.Signed-off-by Lukas Straub <[email protected]>--- block/replication.c | 30 +++++++++++++++++++++++++++--- 1 file changed, 27 insertions(+), 3 deletions(-)block/replication.c +15
-3@@ -165,7 +165,12 @@ static void replication_child_perm(BlockDriverState *bs, BdrvChild *c, uint64_t perm, uint64_t shared, uint64_t *nperm, uint64_t *nshared) { - *nperm =BLK_PERM_CONSISTENT_READ ; + if (role & BDRV_CHILD_PRIMARY) { + *nperm =BLK_PERM_CONSISTENT_READ ; + } else { + *nperm =0 ; + } +if ((bs->open_flags & (BDRV_O_INACTIVE |BDRV_O_RDWR )) ==BDRV_O_RDWR ) { *nperm |=BLK_PERM_WRITE ; }@@ -552,8 +557,25 @@ static void replication_start(ReplicationState *rs, ReplicationMode mode,return ; } - s->hidden_disk = hidden_disk; - s->secondary_disk = secondary_disk; +bdrv_ref (hidden_disk->bs); + s->hidden_disk =bdrv_attach_child (bs, hidden_disk->bs,"hidden disk" , + &child_of_bds,BDRV_CHILD_DATA , + &local_err); +if (local_err) { +error_propagate (errp, local_err); +aio_context_release (aio_context); +return ; + }
block/replication.c static void replication_start(ReplicationState *rs, ReplicationMode mode, · line 578
Quoted 10 lines
block/replication.c +10
-0+ +bdrv_ref (secondary_disk->bs); + s->secondary_disk =bdrv_attach_child (bs, secondary_disk->bs, +"secondary disk" , &child_of_bds, +BDRV_CHILD_DATA , &local_err); +if (local_err) { +error_propagate (errp, local_err); +aio_context_release (aio_context); +return ; + }
Now looking at this I can say that design is a bit strange:
If these children are children of replication state, we probably want something like bdrv_root_attach_child(), and not attach children to the active disk but to the state itself (like block-job children).. But than we'll need new class of bdrv children (child_of_replication?) and that obviously not worth the complexity..
So, we want new children to be children of our filter driver. Than, we probably should create them in repliction_open(), together with bs->file..
Still, it should work as is I think:
Quoted 16 lines
block/replication.c +2
-1/* start backup job now */ error_setg(&s->blocker,@@ -659,7 +681,9 @@ static void replication_done(void *opaque, int ret)if (ret ==0 ) { s->stage =BLOCK_REPLICATION_DONE ; +bdrv_unref_child (bs, s->secondary_disk); s->secondary_disk =NULL ; +bdrv_unref_child (bs, s->hidden_disk); s->hidden_disk =NULL ; s->error =0 ; }else { --2.20.1
Signature · 2 lines
Best regards, Vladimir
Re: [PATCH v3 4/4] replication: Remove workaround
In reply to Lukas StraubQuoted 8 lines · Lukas Straub
Remove the workaround introduced in commit
6ecbc6c52672db5c13805735ca02784879ce8285"replication: Avoidblk_make_empty()on read-only child".It is not needed anymore since
s->hidden_diskis guaranteed to be writable whensecondary_do_checkpoint()runs. Becausereplication_start(),_do_checkpoint()and_stop()are only called by COLO migration code and COLO-migration doesn't inactivate disks.
If look at replication_child_perm() you should also be sure that it always works only with RW disks..
Actually, I think that it would be correct just require BLK_PERM_WRITE in replication_child_perm() unconditionally. Let generic layer care about all these RD/WR things. In _child_perm() we can require WRITE and don't care. If something goes wrong and we can't get WRITE permission we should see clean error-out.
Opposite, if we don't require WRITE permission in some case and still do WRITE request, it may crash.
Still, this may be considered as a preexisting problem of replication_child_perm() and fixed separately.
Quoted 2 lines
Signed-off-by Lukas Straub <[email protected]>
So, for this one commit (with probably updated commit message accordingly to my comments, or even rebased on fixed replication_child_perm()):
Quoted 30 lines
--- block/replication.c | 12 +----------- 1 file changed, 1 insertion(+), 11 deletions(-)block/replication.c +1
-12@@ -348,17 +348,7 @@ static void secondary_do_checkpoint(BlockDriverState *bs, Error **errp)return ; } -BlockBackend *blk =blk_new (qemu_get_current_aio_context (), -BLK_PERM_WRITE ,BLK_PERM_ALL ); -blk_insert_bs (blk, s->hidden_disk->bs, &local_err); -if (local_err) { -error_propagate (errp, local_err); -blk_unref (blk); -return ; - } - - ret =blk_make_empty (blk, errp); -blk_unref (blk); + ret =bdrv_make_empty (s->hidden_disk, errp);if (ret <0 ) {return ; } --2.20.1
Signature · 2 lines
Best regards, Vladimir
Re: [PATCH v3 1/4] replication: Remove s->active_disk
In reply to Vladimir Sementsov-OgievskiyQuoted 32 lines · On Fri, 9 Jul 2021 10:11:15 +0300 Vladimir Sementsov-Ogievskiy…
Quoted 20 lines · Lukas Straub
s->active_diskisbs->file. Remove it and use local variables instead.Signed-off-by Lukas Straub <[email protected]>--- block/replication.c | 38 +++++++++++++++++++++----------------- 1 file changed, 21 insertions(+), 17 deletions(-)block/replication.c +0
-1@@ -35,7 +35,6 @@ typedef enum { typedef struct BDRVReplicationState { ReplicationMode mode; ReplicationStage stage; - BdrvChild *active_disk; BlockJob *commit_job; BdrvChild *hidden_disk; BdrvChild *secondary_disk;block/replication.c out: · line 312
Quoted 8 lines
block/replication.c +3
-1@@ -307,11 +306,15 @@ out:return ret; } -static void secondary_do_checkpoint (BDRVReplicationState *s,Error **errp) +static void secondary_do_checkpoint (BlockDriverState *bs,Error **errp) { +BDRVReplicationState *s = bs->opaque; +BdrvChild *active_disk;Why not to combine initialization into definition:
Quoted 1 line
BdrvChild
*active_disk=bs->file;
Ok, will fix.
Quoted 35 lines
Quoted 35 lines
block/replication.c +6
-3Error *local_err =NULL ;int ret; + active_disk = bs->file; +if (!s->backup_job) {error_setg (errp,"Backup job was cancelled unexpectedly" );return ;@@ -323,13 +326,13 @@ static void secondary_do_checkpoint(BDRVReplicationState *s, Error **errp)return ; } -if (!s->active_disk->bs->drv) { +if (!active_disk->bs->drv) {error_setg (errp,"Active disk %s is ejected" , - s->active_disk->bs->node_name); + active_disk->bs->node_name);return ; } - ret =bdrv_make_empty (s->active_disk, errp); + ret =bdrv_make_empty (active_disk, errp);if (ret <0 ) {return ; }@@ -451,6 +454,7 @@ static void replication_start(ReplicationState *rs, ReplicationMode mode,BlockDriverState *bs = rs->opaque;BDRVReplicationState *s;BlockDriverState *top_bs; +BdrvChild *active_disk;int64_t active_length, hidden_length, disk_length;AioContext *aio_context;Error *local_err =NULL ;@@ -488,15 +492,14 @@ static void replication_start(ReplicationState *rs, ReplicationMode mode,case REPLICATION_MODE_PRIMARY :
Quoted 8 lines
block/replication.c static void replication_start(ReplicationState *rs, ReplicationMode mode, · line 495
Quoted 6 lines
block/replication.c +1
-3break ;case REPLICATION_MODE_SECONDARY : - s->active_disk = bs->file; -if (!s->active_disk || !s->active_disk->bs || - !s->active_disk->bs->backing) { + active_disk = bs->file;Here initializing
active_diskonly here makes sense: we consider "active disk" only in secondary mode. Right?
Yes.
Quoted 83 lines
Quoted 83 lines
block/replication.c +10
-8+if (!active_disk || !active_disk->bs || !active_disk->bs->backing) {error_setg (errp,"Active disk doesn't have backing file" );aio_context_release (aio_context);return ; } - s->hidden_disk = s->active_disk->bs->backing; + s->hidden_disk = active_disk->bs->backing;if (!s->hidden_disk->bs || !s->hidden_disk->bs->backing) {error_setg (errp,"Hidden disk doesn't have backing file" );aio_context_release (aio_context);@@ -511,7 +514,7 @@ static void replication_start(ReplicationState *rs, ReplicationMode mode, }/* verify the length */ - active_length =bdrv_getlength (s->active_disk->bs); + active_length =bdrv_getlength (active_disk->bs); hidden_length =bdrv_getlength (s->hidden_disk->bs); disk_length =bdrv_getlength (s->secondary_disk->bs); if (active_length < 0 || hidden_length < 0 || disk_length < 0 ||@@ -523,9 +526,9 @@ static void replication_start(ReplicationState *rs, ReplicationMode mode, }/* Must be true, or the bdrv_getlength() calls would have failed */ -assert (s->active_disk->bs->drv && s->hidden_disk->bs->drv); +assert (active_disk->bs->drv && s->hidden_disk->bs->drv); -if (!s->active_disk->bs->drv->bdrv_make_empty || +if (!active_disk->bs->drv->bdrv_make_empty || !s->hidden_disk->bs->drv->bdrv_make_empty) {error_setg (errp,"Active disk or hidden disk doesn't support make_empty" );@@ -579,7 +582,7 @@ static void replication_start(ReplicationState *rs, ReplicationMode mode, s->stage =BLOCK_REPLICATION_RUNNING ;if (s->mode ==REPLICATION_MODE_SECONDARY ) { -secondary_do_checkpoint (s, errp); +secondary_do_checkpoint (bs, errp); } s->error =0 ;@@ -608,7 +611,7 @@ static void replication_do_checkpoint(ReplicationState *rs, Error **errp) }if (s->mode ==REPLICATION_MODE_SECONDARY ) { -secondary_do_checkpoint (s, errp); +secondary_do_checkpoint (bs, errp); }aio_context_release (aio_context); }@@ -645,7 +648,6 @@ static void replication_done(void *opaque, int ret)if (ret ==0 ) { s->stage =BLOCK_REPLICATION_DONE ; - s->active_disk =NULL ; s->secondary_disk =NULL ; s->hidden_disk =NULL ; s->error =0 ;@@ -659,11 +661,13 @@ static void replication_stop(ReplicationState *rs, bool failover, Error **errp) {BlockDriverState *bs = rs->opaque;BDRVReplicationState *s; +BdrvChild *active_disk;AioContext *aio_context; aio_context =bdrv_get_aio_context (bs);aio_context_acquire (aio_context); s = bs->opaque; + active_disk = bs->file;if (s->stage ==BLOCK_REPLICATION_DONE || s->stage ==BLOCK_REPLICATION_FAILOVER ) {@@ -698,7 +702,7 @@ static void replication_stop(ReplicationState *rs, bool failover, Error **errp) }if (!failover) { -secondary_do_checkpoint (s, errp); +secondary_do_checkpoint (bs, errp); s->stage =BLOCK_REPLICATION_DONE ;aio_context_release (aio_context);return ;@@ -706,7 +710,7 @@ static void replication_stop(ReplicationState *rs, bool failover, Error **errp)
Quoted 5 lines
block/replication.c static void replication_stop(ReplicationState *rs, bool failover, Error **errp) · line 711
Quoted 1 line
block/replication.c +0
-0s->stage =BLOCK_REPLICATION_FAILOVER ;For consistency, it seems right to initialize
active_diskonly in "caseREPLICATION_MODE_SECONDARY:", like above..But then, it becomes obvious that no sense in creating additional variable to use it once.. So here I'd just use
bs->file->bs
Ok, will fix.
Quoted 11 lines
Quoted 9 lines
block/replication.c +1
-2s->commit_job =commit_active_start ( -NULL , s->active_disk->bs, s->secondary_disk->bs, +NULL , active_disk->bs, s->secondary_disk->bs,JOB_INTERNAL ,0 ,BLOCKDEV_ON_ERROR_REPORT ,NULL , replication_done, bs, true, errp);break ; --2.20.1
Quoted 3 lines
Anyway:
Reviewed-by Vladimir Sementsov-Ogievskiy <[email protected]>
Thanks,
Lukas Straub
Re: [PATCH v3 4/4] replication: Remove workaround
In reply to Vladimir Sementsov-OgievskiyQuoted 10 lines · On Fri, 9 Jul 2021 10:49:23 +0300 Vladimir Sementsov-Ogievskiy…
Quoted 8 lines · Lukas Straub
Remove the workaround introduced in commit
6ecbc6c52672db5c13805735ca02784879ce8285"replication: Avoidblk_make_empty()on read-only child".It is not needed anymore since
s->hidden_diskis guaranteed to be writable whensecondary_do_checkpoint()runs. Becausereplication_start(),_do_checkpoint()and_stop()are only called by COLO migration code and COLO-migration doesn't inactivate disks.
Quoted 7 lines
If look at
replication_child_perm()you should also be sure that it always works only with RW disks..Actually, I think that it would be correct just require
BLK_PERM_WRITEinreplication_child_perm()unconditionally. Let generic layer care about all these RD/WR things. In_child_perm()we can require WRITE and don't care. If something goes wrong and we can't get WRITE permission we should see clean error-out.Opposite, if we don't require WRITE permission in some case and still do WRITE request, it may crash.
Still, this may be considered as a preexisting problem of
replication_child_perm()and fixed separately.
Hmm, unconditionally requesting write doesn't work, since qemu on the secondary side is started with "-miration incoming", it goes into runstate RUN_STATE_INMIGRATE from the beginning and then blockdev_init() opens every blockdev with BDRV_O_INACTIVE and then it errors out with -drive driver=replication,...: Block node is read-only.
Quoted 40 lines
Quoted 2 lines
Signed-off-by Lukas Straub <[email protected]>So, for this one commit (with probably updated commit message accordingly to my comments, or even rebased on fixed
replication_child_perm()):Reviewed-by Vladimir Sementsov-Ogievskiy <[email protected]>Quoted 30 lines
--- block/replication.c | 12 +----------- 1 file changed, 1 insertion(+), 11 deletions(-)block/replication.c +1
-12@@ -348,17 +348,7 @@ static void secondary_do_checkpoint(BlockDriverState *bs, Error **errp)return ; } -BlockBackend *blk =blk_new (qemu_get_current_aio_context (), -BLK_PERM_WRITE ,BLK_PERM_ALL ); -blk_insert_bs (blk, s->hidden_disk->bs, &local_err); -if (local_err) { -error_propagate (errp, local_err); -blk_unref (blk); -return ; - } - - ret =blk_make_empty (blk, errp); -blk_unref (blk); + ret =bdrv_make_empty (s->hidden_disk, errp);if (ret <0 ) {return ; } --2.20.1
Re: [PATCH v3 4/4] replication: Remove workaround
Quoted 19 lines · Lukas Straub
Quoted 16 lines · On Fri, 9 Jul 2021 10:49:23 +0300 Vladimir Sementsov-Ogievskiy…
Quoted 8 lines · Lukas Straub
Remove the workaround introduced in commit
6ecbc6c52672db5c13805735ca02784879ce8285"replication: Avoidblk_make_empty()on read-only child".It is not needed anymore since
s->hidden_diskis guaranteed to be writable whensecondary_do_checkpoint()runs. Becausereplication_start(),_do_checkpoint()and_stop()are only called by COLO migration code and COLO-migration doesn't inactivate disks.If look at
replication_child_perm()you should also be sure that it always works only with RW disks..Actually, I think that it would be correct just require
BLK_PERM_WRITEinreplication_child_perm()unconditionally. Let generic layer care about all these RD/WR things. In_child_perm()we can require WRITE and don't care. If something goes wrong and we can't get WRITE permission we should see clean error-out.Opposite, if we don't require WRITE permission in some case and still do WRITE request, it may crash.
Quoted 7 lines
Quoted 1 line
Still, this may be considered as a preexisting problem of
replication_child_perm()and fixed separately.Hmm, unconditionally requesting write doesn't work, since qemu on the secondary side is started with "-miration incoming", it goes into runstate
RUN_STATE_INMIGRATEfrom the beginning and thenblockdev_init()opens every blockdev withBDRV_O_INACTIVEand then it errors out with -drive driver=replication,...: Block node is read-only.
Ah, OK. So we need this check in _child_perm().. Then, maybe, leave check or assertion in secondary_do_checkpoint, that hidden_disk is writable?
Quoted 44 lines
Quoted 41 lines
Quoted 3 lines
Signed-off-by Lukas Straub <[email protected]>So, for this one commit (with probably updated commit message accordingly to my comments, or even rebased on fixed
replication_child_perm()):Reviewed-by Vladimir Sementsov-Ogievskiy <[email protected]>Quoted 30 lines
--- block/replication.c | 12 +----------- 1 file changed, 1 insertion(+), 11 deletions(-)block/replication.c +1
-12@@ -348,17 +348,7 @@ static void secondary_do_checkpoint(BlockDriverState *bs, Error **errp)return ; } -BlockBackend *blk =blk_new (qemu_get_current_aio_context (), -BLK_PERM_WRITE ,BLK_PERM_ALL ); -blk_insert_bs (blk, s->hidden_disk->bs, &local_err); -if (local_err) { -error_propagate (errp, local_err); -blk_unref (blk); -return ; - } - - ret =blk_make_empty (blk, errp); -blk_unref (blk); + ret =bdrv_make_empty (s->hidden_disk, errp);if (ret <0 ) {return ; } --2.20.1
Signature · 2 lines
Best regards, Vladimir
Re: [PATCH v3 4/4] replication: Remove workaround
Quoted 22 lines · On Mon, 12 Jul 2021 13:06:19 +0300 Vladimir Sementsov-Ogievskiy…
Quoted 21 lines · Lukas Straub
Quoted 17 lines · On Fri, 9 Jul 2021 10:49:23 +0300 Vladimir Sementsov-Ogievskiy…
Quoted 8 lines · Lukas Straub
Remove the workaround introduced in commit
6ecbc6c52672db5c13805735ca02784879ce8285"replication: Avoidblk_make_empty()on read-only child".It is not needed anymore since
s->hidden_diskis guaranteed to be writable whensecondary_do_checkpoint()runs. Becausereplication_start(),_do_checkpoint()and_stop()are only called by COLO migration code and COLO-migration doesn't inactivate disks.If look at
replication_child_perm()you should also be sure that it always works only with RW disks..Actually, I think that it would be correct just require
BLK_PERM_WRITEinreplication_child_perm()unconditionally. Let generic layer care about all these RD/WR things. In_child_perm()we can require WRITE and don't care. If something goes wrong and we can't get WRITE permission we should see clean error-out.Opposite, if we don't require WRITE permission in some case and still do WRITE request, it may crash.
Still, this may be considered as a preexisting problem of
replication_child_perm()and fixed separately.
Quoted 7 lines
Quoted 5 lines
Hmm, unconditionally requesting write doesn't work, since qemu on the secondary side is started with "-miration incoming", it goes into runstate
RUN_STATE_INMIGRATEfrom the beginning and thenblockdev_init()opens every blockdev withBDRV_O_INACTIVEand then it errors out with -drive driver=replication,...: Block node is read-only.Ah, OK. So we need this check in
_child_perm().. Then, maybe, leave check or assertion insecondary_do_checkpoint, thathidden_diskis writable?
Good Idea. I will add assertions to secondary_do_checkpoint and replication_co_writev too.
Quoted 46 lines
Quoted 44 lines
Quoted 41 lines
Quoted 3 lines
Signed-off-by Lukas Straub <[email protected]>So, for this one commit (with probably updated commit message accordingly to my comments, or even rebased on fixed
replication_child_perm()):Reviewed-by Vladimir Sementsov-Ogievskiy <[email protected]>Quoted 30 lines
--- block/replication.c | 12 +----------- 1 file changed, 1 insertion(+), 11 deletions(-)block/replication.c +1
-12@@ -348,17 +348,7 @@ static void secondary_do_checkpoint(BlockDriverState *bs, Error **errp)return ; } -BlockBackend *blk =blk_new (qemu_get_current_aio_context (), -BLK_PERM_WRITE ,BLK_PERM_ALL ); -blk_insert_bs (blk, s->hidden_disk->bs, &local_err); -if (local_err) { -error_propagate (errp, local_err); -blk_unref (blk); -return ; - } - - ret =blk_make_empty (blk, errp); -blk_unref (blk); + ret =bdrv_make_empty (s->hidden_disk, errp);if (ret <0 ) {return ; } --2.20.1