fullmesh path manager support
Subsystems (3)
v3 cover fullmesh path manager support
From: Geliang Tang <[email protected]>
v3:
- the in-kernel fullmesh path manager has been dropped from this patchset, only keep the fullmesh flag support code.
v2:
- Implement the fullmesh mode as an extension to the netlink PM, not a standalone PM as Paolo suggested.
- drop duplicate code.
- add a new per endpoint flag MPTCP_PM_ADDR_FLAG_FULLMESH.
Geliang Tang (5):
mptcp: remote addresses fullmesh
mptcp: local addresses fullmesh
selftests: mptcp: set and print the fullmesh flag
selftests: mptcp: add fullmesh testcases
selftests: mptcp: delete uncontinuous removing ids
include/uapi/linux/mptcp.h | 1 + net/mptcp/pm_netlink.c | 81 +++++++++++++++++-- .../testing/selftests/net/mptcp/mptcp_join.sh | 59 +++++++++++--- tools/testing/selftests/net/mptcp/pm_nl_ctl.c | 11 ++- 4 files changed, 136 insertions(+), 16 deletions(-)
Signature · 1 line
2.31.1
PATCH v3 1/5 mptcp: remote addresses fullmesh
From: Geliang Tang <[email protected]>
This patch added and managed a new per endpoint flag, named MPTCP_PM_ADDR_FLAG_FULLMESH.
In mptcp_pm_create_subflow_or_signal_addr(), if such flag is set, instead of:
remote_address((struct sock_common *)sk, &remote);
fill a temporary allocated array of all known remote address. After releaseing the pm lock loop on such array and create a subflow for each remote address from the given local.
Note that the we could still use an array even for non 'fullmesh'
endpoint: with a single entry corresponding to the primary MPC subflow remote address.
--- include/uapi/linux/mptcp.h | 1 + net/mptcp/pm_netlink.c | 46 +++++++++++++++++++++++++++++++++++--- 2 files changed, 44 insertions(+), 3 deletions(-)
include/uapi/linux/mptcp.h +1 -0
@@ -73,6 +73,7 @@ enum {#define MPTCP_PM_ADDR_FLAG_SIGNAL (1 << 0)#define MPTCP_PM_ADDR_FLAG_SUBFLOW (1 << 1)#define MPTCP_PM_ADDR_FLAG_BACKUP (1 << 2) +#define MPTCP_PM_ADDR_FLAG_FULLMESH (1 << 3)enum {MPTCP_PM_CMD_UNSPEC ,
net/mptcp/pm_netlink.c +43 -3
64 lines not on this page · raw message
Signature · 1 line
2.31.1
PATCH v3 2/5 mptcp: local addresses fullmesh
From: Geliang Tang <[email protected]>
In mptcp_pm_nl_add_addr_received(), fill a temporary allocate array of all local address corresponding to the fullmesh endpoint. If such array is empty, keep the current behavior.
Elsewhere loop on such array and create a subflow for each local address towards the given remote address
--- net/mptcp/pm_netlink.c | 35 ++++++++++++++++++++++++++++++++--- 1 file changed, 32 insertions(+), 3 deletions(-)
net/mptcp/pm_netlink.c +32 -3
@@ -526,12 +526,17 @@ static void mptcp_pm_nl_subflow_established(struct mptcp_sock *msk)static void mptcp_pm_nl_add_addr_received (struct mptcp_sock *msk) { +struct mptcp_pm_addr_entry entries[MPTCP_PM_ADDR_MAX ];struct sock *sk = (struct sock *)msk; +struct mptcp_pm_addr_entry *entry;unsigned int add_addr_accept_max; +struct mptcp_pm_addr_entry local;struct mptcp_addr_info remote; -struct mptcp_addr_info local; +struct pm_nl_pernet *pernet;unsigned int subflows_max; +int i, n =0 ; + pernet =net_generic (sock_net (sk), pm_nl_pernet_id); add_addr_accept_max =mptcp_pm_get_add_addr_accept_max (msk); subflows_max =mptcp_pm_get_subflows_max (msk);
@@ -555,10 +560,34 @@ static void mptcp_pm_nl_add_addr_received(struct mptcp_sock *msk)if (!remote.port) remote.port = sk->sk_dport;memset (&local,0 ,sizeof (local)); - local.family = remote.family; + local.addr.family = remote.family; + entries[n++] = local; +rcu_read_lock (); +__mptcp_flush_join_list (msk); +list_for_each_entry_rcu (entry, &pernet->local_addr_list, list) { +if (!(entry->flags &MPTCP_PM_ADDR_FLAG_FULLMESH )) +continue ; + +if (entry->addr.family != sk->sk_family) { +#if IS_ENABLED (CONFIG_MPTCP_IPV6 ) +if ((entry->addr.family ==AF_INET && + !ipv6_addr_v4mapped (&sk->sk_v6_daddr)) || + (sk->sk_family ==AF_INET && + !ipv6_addr_v4mapped(&entry->addr.addr6))) +#endif +continue ; + } + +if (!lookup_subflow_by_addrs (&msk->conn_list, &entry->addr, &remote)) + entries[n++] = *entry; + } +rcu_read_unlock ();spin_unlock_bh (&msk->pm.lock); -__mptcp_subflow_connect (sk, &local, &remote,0 ,0 ); +for (i =0 ; i < n; i++) { +__mptcp_subflow_connect (sk, &entries[i].addr, &remote, + entries[i].flags, entries[i].ifindex); + }spin_lock_bh (&msk->pm.lock); add_addr_echo:
Signature · 1 line
2.31.1
PATCH v3 3/5 selftests: mptcp: set and print the fullmesh flag
From: Geliang Tang <[email protected]>
This patch dealt with the MPTCP_PM_ADDR_FLAG_FULLMESH flag in add_addr() and print_addr(), to set and print out the fullmesh flag.
--- tools/testing/selftests/net/mptcp/pm_nl_ctl.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-)
tools/testing/selftests/net/mptcp/pm_nl_ctl.c +10 -1
@@ -25,7 +25,7 @@static void syntax (char *argv[]) {fprintf (stderr,"%s add|get|set|del|flush|dump|accept [<args>]\n" , argv[0 ]); -fprintf (stderr,"\tadd [flags signal|subflow|backup] [id <nr>] [dev <name>] <ip>\n" ); +fprintf (stderr,"\tadd [flags signal|subflow|backup|fullmesh] [id <nr>] [dev <name>] <ip>\n" );fprintf (stderr,"\tdel <id> [<ip>]\n" );fprintf (stderr,"\tget <id>\n" );fprintf (stderr,"\tset <ip> [flags backup|nobackup]\n" );
@@ -236,6 +236,8 @@ int add_addr(int fd, int pm_family, int argc, char *argv[]) flags |=MPTCP_PM_ADDR_FLAG_SIGNAL ; else if (!strcmp(tok, "backup")) flags |=MPTCP_PM_ADDR_FLAG_BACKUP ; + else if (!strcmp(tok, "fullmesh")) + flags |=MPTCP_PM_ADDR_FLAG_FULLMESH ; else error(1, errno, "unknown flag %s", argv[arg]);
@@ -422,6 +424,13 @@ static void print_addr(struct rtattr *attrs, int len)printf ("," ); } +if (flags &MPTCP_PM_ADDR_FLAG_FULLMESH ) { +printf ("fullmesh" ); + flags &= ~MPTCP_PM_ADDR_FLAG_FULLMESH ; +if (flags) +printf ("," ); + } +/* bump unknown flags, if any */ if (flags)printf ("0x%x" , flags);
Signature · 1 line
2.31.1
PATCH v3 4/5 selftests: mptcp: add fullmesh testcases
From: Geliang Tang <[email protected]>
This patch added the testcases for the fullmesh address flag of the path manager.
--- .../testing/selftests/net/mptcp/mptcp_join.sh | 49 +++++++++++++++++-- 1 file changed, 44 insertions(+), 5 deletions(-)
tools/testing/selftests/net/mptcp/mptcp_join.sh +44 -5
@@ -325,7 +325,13 @@ do_transfer() cpid=$! if [ $addr_nr_ns1 -gt 0 ]; then - let add_nr_ns1=addr_nr_ns1 + if [ $addr_nr_ns1 -gt 10 ]; then + let add_nr_ns1=addr_nr_ns1-10 + flags=signal,fullmesh + else + let add_nr_ns1=addr_nr_ns1 + flags=signal + fi counter=2 sleep 1 while [ $add_nr_ns1 -gt 0 ]; do
@@ -335,7 +341,7 @@ do_transfer() else addr="10.0.$counter.1" fi - ip netns exec $ns1 ./pm_nl_ctl add $addr flags signal + ip netns exec $ns1 ./pm_nl_ctl add $addr flags $flags let counter+=1 let add_nr_ns1-=1 done
@@ -367,7 +373,13 @@ do_transfer() fi if [ $addr_nr_ns2 -gt 0 ]; then - let add_nr_ns2=addr_nr_ns2 + if [ $addr_nr_ns2 -gt 10 ]; then + let add_nr_ns2=addr_nr_ns2-10 + flags=subflow,fullmesh + else + let add_nr_ns2=addr_nr_ns2 + flags=subflow + fi counter=3 sleep 1 while [ $add_nr_ns2 -gt 0 ]; do
@@ -377,7 +389,7 @@ do_transfer() else addr="10.0.$counter.2" fi - ip netns exec $ns2 ./pm_nl_ctl add $addr flags subflow + ip netns exec $ns2 ./pm_nl_ctl add $addr flags $flags let counter+=1 let add_nr_ns2-=1 done
@@ -1697,6 +1709,28 @@ deny_join_id0_tests() chk_join_nr "subflow and address allow join id0 2" 1 1 1 } +fullmesh_tests() +{ + # fullmesh 1 + reset + ip netns exec $ns1 ./pm_nl_ctl limits 8 8 + ip netns exec $ns2 ./pm_nl_ctl limits 8 8 + ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal + ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow,fullmesh + run_tests $ns1 $ns2 10.0.1.1 0 0 0 slow + chk_join_nr "signal address fullmesh 1" 3 3 3 + chk_add_nr 1 1 + + # fullmesh 2 + reset + ip netns exec $ns1 ./pm_nl_ctl limits 8 8 + ip netns exec $ns2 ./pm_nl_ctl limits 8 8 + ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal + run_tests $ns1 $ns2 10.0.1.1 0 0 11 slow + chk_join_nr "signal address fullmesh 2" 3 3 3 + chk_add_nr 1 1 +} + all_tests() { subflows_tests
@@ -1712,6 +1746,7 @@ all_tests() syncookies_tests checksum_tests deny_join_id0_tests + fullmesh_tests } usage()
@@ -1730,6 +1765,7 @@ usage() echo " -k syncookies_tests" echo " -S checksum_tests" echo " -d deny_join_id0_tests" + echo " -m fullmesh_tests" echo " -c capture pcap files" echo " -C enable data checksum" echo " -h help"
@@ -1765,7 +1801,7 @@ if [ $do_all_tests -eq 1 ]; then exit $ret fi -while getopts 'fsltra64bpkdchCS' opt; do +while getopts 'fsltra64bpkdmchCS' opt; do case $opt in f) subflows_tests
@@ -1806,6 +1842,9 @@ while getopts 'fsltra64bpkdchCS' opt; do d) deny_join_id0_tests ;; + m) + fullmesh_tests + ;; c) ;; C)
Signature · 1 line
2.31.1
PATCH v3 5/5 selftests: mptcp: delete uncontinuous removing ids
From: Geliang Tang <[email protected]>
The removing addresses testcases can only deal with the continuous ids. This patch added the uncontinuous removing ids support.
--- tools/testing/selftests/net/mptcp/mptcp_join.sh | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-)
tools/testing/selftests/net/mptcp/mptcp_join.sh +6 -4
@@ -350,17 +350,18 @@ do_transfer() let rm_nr_ns1=-addr_nr_ns1 if [ $rm_nr_ns1 -lt 8 ]; then counter=1 + pos=1 dump=(`ip netns exec ${listener_ns} ./pm_nl_ctl dump`) if [ ${#dump[@]} -gt 0 ]; then - id=${dump[1]} sleep 1 while [ $counter -le $rm_nr_ns1 ] do + id=${dump[$pos]} ip netns exec ${listener_ns} ./pm_nl_ctl del $id sleep 1 let counter+=1 - let id+=1 + let pos+=5 done fi elif [ $rm_nr_ns1 -eq 8 ]; then
@@ -398,17 +399,18 @@ do_transfer() let rm_nr_ns2=-addr_nr_ns2 if [ $rm_nr_ns2 -lt 8 ]; then counter=1 + pos=1 dump=(`ip netns exec ${connector_ns} ./pm_nl_ctl dump`) if [ ${#dump[@]} -gt 0 ]; then - id=${dump[1]} sleep 1 while [ $counter -le $rm_nr_ns2 ] do + id=${dump[$pos]} ip netns exec ${connector_ns} ./pm_nl_ctl del $id sleep 1 let counter+=1 - let id+=1 + let pos+=5 done fi elif [ $rm_nr_ns2 -eq 8 ]; then
Signature · 1 line
2.31.1
Paolo Abeni
maintainerRe: [MPTCP][PATCH v3 mptcp-next 2/5] mptcp: local addresses fullmesh
In reply to Geliang TangQuoted 39 lines · Geliang Tang
From: Geliang Tang <[email protected]>
In
mptcp_pm_nl_add_addr_received(), fill a temporary allocate array of all local address corresponding to the fullmesh endpoint. If such array is empty, keep the current behavior.Elsewhere loop on such array and create a subflow for each local address towards the given remote address
Suggested-by Paolo Abeni <[email protected]>Signed-off-by Geliang Tang <[email protected]>--- net/mptcp/pm_netlink.c | 35 ++++++++++++++++++++++++++++++++--- 1 file changed, 32 insertions(+), 3 deletions(-)net/mptcp/pm_netlink.c +6
-1@@ -526,12 +526,17 @@ static void mptcp_pm_nl_subflow_established(struct mptcp_sock *msk)static void mptcp_pm_nl_add_addr_received (struct mptcp_sock *msk) { +struct mptcp_pm_addr_entry entries[MPTCP_PM_ADDR_MAX ];struct sock *sk = (struct sock *)msk; +struct mptcp_pm_addr_entry *entry;unsigned int add_addr_accept_max; +struct mptcp_pm_addr_entry local;struct mptcp_addr_info remote; -struct mptcp_addr_info local; +struct pm_nl_pernet *pernet;unsigned int subflows_max; +int i, n =0 ; + pernet =net_generic (sock_net (sk), pm_nl_pernet_id); add_addr_accept_max =mptcp_pm_get_add_addr_accept_max (msk); subflows_max =mptcp_pm_get_subflows_max (msk);
net/mptcp/pm_netlink.c static void mptcp_pm_nl_add_addr_received(struct mptcp_sock *msk) · line 565
Quoted 7 lines
net/mptcp/pm_netlink.c +2
-1@@ -555,10 +560,34 @@ static void mptcp_pm_nl_add_addr_received(struct mptcp_sock *msk)if (!remote.port) remote.port = sk->sk_dport;memset (&local,0 ,sizeof (local)); - local.family = remote.family; + local.addr.family = remote.family; + entries[n++] = local;
If I read correctly, I think this entry should be added only if the full-mesh selection below find no other entries. Otherwise, e.g. in the simple scenario with 2 locals address, 3 subflows will be created.
Quoted 8 lines
net/mptcp/pm_netlink.c +8
-0+rcu_read_lock (); +__mptcp_flush_join_list (msk); +list_for_each_entry_rcu (entry, &pernet->local_addr_list, list) { +if (!(entry->flags &MPTCP_PM_ADDR_FLAG_FULLMESH )) +continue ; + +if (entry->addr.family != sk->sk_family) { +#if IS_ENABLED (CONFIG_MPTCP_IPV6 )
net/mptcp/pm_netlink.c static void mptcp_pm_nl_add_addr_received(struct mptcp_sock *msk) · line 583
Quoted 10 lines
net/mptcp/pm_netlink.c +10
-0+if ((entry->addr.family ==AF_INET && + !ipv6_addr_v4mapped (&sk->sk_v6_daddr)) || + (sk->sk_family ==AF_INET && + !ipv6_addr_v4mapped(&entry->addr.addr6))) +#endif +continue ; + } + +if (!lookup_subflow_by_addrs (&msk->conn_list, &entry->addr, &remote)) + entries[n++] = *entry;
I guess the loop should stop when:
n + <number of already existing subflows> = mptcp_pm_get_subflows_max()
Even the previous patch need a similar check.
Additional minor nit, what about encapsualting the above chunk in a new helper - fill_source_addresses_vec() or something similar? It gets the current pm and net as input arguments, the address vector as an output arg, and returns the number of addresses filled into the array (enforcing the above constraint).
This also applies to the previous patch.
Cheers,
Paolo
Paolo Abeni
maintainerRe: [MPTCP][PATCH v3 mptcp-next 3/5] selftests: mptcp: set and print the fullmesh flag
In reply to Geliang TangQuoted 4 lines · Geliang Tang
From: Geliang Tang <[email protected]>
This patch dealt with the
MPTCP_PM_ADDR_FLAG_FULLMESHflag inadd_addr()andprint_addr(), to set and print out the fullmesh flag.
I'm unsure we should enforce no 'SIGNAL' flag is set on the relevant endpoint. Likely not required...
/P
Re: [MPTCP][PATCH v3 mptcp-next 2/5] mptcp: local addresses fullmesh
In reply to Paolo AbeniQuoted 47 lines · Paolo Abeni <[email protected]> 于2021年7月26日周一 下午4:24写道:
Quoted 45 lines · Geliang Tang
From: Geliang Tang <[email protected]>
In
mptcp_pm_nl_add_addr_received(), fill a temporary allocate array of all local address corresponding to the fullmesh endpoint. If such array is empty, keep the current behavior.Elsewhere loop on such array and create a subflow for each local address towards the given remote address
Suggested-by Paolo Abeni <[email protected]>Signed-off-by Geliang Tang <[email protected]>--- net/mptcp/pm_netlink.c | 35 ++++++++++++++++++++++++++++++++--- 1 file changed, 32 insertions(+), 3 deletions(-)net/mptcp/pm_netlink.c +7
-2@@ -526,12 +526,17 @@ static void mptcp_pm_nl_subflow_established(struct mptcp_sock *msk)static void mptcp_pm_nl_add_addr_received (struct mptcp_sock *msk) { +struct mptcp_pm_addr_entry entries[MPTCP_PM_ADDR_MAX ];struct sock *sk = (struct sock *)msk; +struct mptcp_pm_addr_entry *entry;unsigned int add_addr_accept_max; +struct mptcp_pm_addr_entry local;struct mptcp_addr_info remote; -struct mptcp_addr_info local; +struct pm_nl_pernet *pernet;unsigned int subflows_max; +int i, n =0 ; + pernet =net_generic (sock_net (sk), pm_nl_pernet_id); add_addr_accept_max =mptcp_pm_get_add_addr_accept_max (msk); subflows_max =mptcp_pm_get_subflows_max (msk);@@ -555,10 +560,34 @@ static void mptcp_pm_nl_add_addr_received(struct mptcp_sock *msk)if (!remote.port) remote.port = sk->sk_dport;memset (&local,0 ,sizeof (local)); - local.family = remote.family; + local.addr.family = remote.family;
Quoted 5 lines
net/mptcp/pm_netlink.c static void mptcp_pm_nl_add_addr_received(struct mptcp_sock *msk) · line 565
Quoted 1 line
net/mptcp/pm_netlink.c +1
-0+ entries[n++] = local;If I read correctly, I think this entry should be added only if the full-mesh selection below find no other entries. Otherwise, e.g. in the simple scenario with 2 locals address, 3 subflows will be created.
local is the id 0 address, this address should always be used, and it's not on the local_addr_list. So I think we should put local in the array all the time, no matter fullmesh or not.
Do you agree?
Thanks,
-Geliang
Quoted 38 lines
Quoted 9 lines
net/mptcp/pm_netlink.c +8
-0+rcu_read_lock (); +__mptcp_flush_join_list (msk); +list_for_each_entry_rcu (entry, &pernet->local_addr_list, list) { +if (!(entry->flags &MPTCP_PM_ADDR_FLAG_FULLMESH )) +continue ; + +if (entry->addr.family != sk->sk_family) { +#if IS_ENABLED (CONFIG_MPTCP_IPV6 )net/mptcp/pm_netlink.c static void mptcp_pm_nl_add_addr_received(struct mptcp_sock *msk) · line 583
Quoted 10 lines
net/mptcp/pm_netlink.c +10
-0+if ((entry->addr.family ==AF_INET && + !ipv6_addr_v4mapped (&sk->sk_v6_daddr)) || + (sk->sk_family ==AF_INET && + !ipv6_addr_v4mapped(&entry->addr.addr6))) +#endif +continue ; + } + +if (!lookup_subflow_by_addrs (&msk->conn_list, &entry->addr, &remote)) + entries[n++] = *entry;I guess the loop should stop when:
n + <number of already existing subflows> =
mptcp_pm_get_subflows_max()Even the previous patch need a similar check.
Additional minor nit, what about encapsualting the above chunk in a new helper -
fill_source_addresses_vec()or something similar? It gets the current pm and net as input arguments, the address vector as an output arg, and returns the number of addresses filled into the array (enforcing the above constraint).This also applies to the previous patch.
Cheers,
Paolo
Paolo Abeni
maintainerRe: [MPTCP][PATCH v3 mptcp-next 3/5] selftests: mptcp: set and print the fullmesh flag
In reply to Paolo AbeniQuoted 8 lines · Paolo Abeni
Quoted 4 lines · Geliang Tang
From: Geliang Tang <[email protected]>
This patch dealt with the
MPTCP_PM_ADDR_FLAG_FULLMESHflag inadd_addr()andprint_addr(), to set and print out the fullmesh flag.I'm unsure we should enforce no 'SIGNAL' flag is set on the relevant endpoint. Likely not required...
Whoops this comment really matters for patch 1/5, sorry for the confusion!
/P
Paolo Abeni
maintainerRe: [MPTCP][PATCH v3 mptcp-next 2/5] mptcp: local addresses fullmesh
In reply to Geliang TangQuoted 47 lines · Geliang Tang
Quoted 46 lines · Paolo Abeni <[email protected]> 于2021年7月26日周一 下午4:24写道:
Quoted 45 lines · Geliang Tang
From: Geliang Tang <[email protected]>
In
mptcp_pm_nl_add_addr_received(), fill a temporary allocate array of all local address corresponding to the fullmesh endpoint. If such array is empty, keep the current behavior.Elsewhere loop on such array and create a subflow for each local address towards the given remote address
Suggested-by Paolo Abeni <[email protected]>Signed-off-by Geliang Tang <[email protected]>--- net/mptcp/pm_netlink.c | 35 ++++++++++++++++++++++++++++++++--- 1 file changed, 32 insertions(+), 3 deletions(-)net/mptcp/pm_netlink.c +7
-2@@ -526,12 +526,17 @@ static void mptcp_pm_nl_subflow_established(struct mptcp_sock *msk)static void mptcp_pm_nl_add_addr_received (struct mptcp_sock *msk) { +struct mptcp_pm_addr_entry entries[MPTCP_PM_ADDR_MAX ];struct sock *sk = (struct sock *)msk; +struct mptcp_pm_addr_entry *entry;unsigned int add_addr_accept_max; +struct mptcp_pm_addr_entry local;struct mptcp_addr_info remote; -struct mptcp_addr_info local; +struct pm_nl_pernet *pernet;unsigned int subflows_max; +int i, n =0 ; + pernet =net_generic (sock_net (sk), pm_nl_pernet_id); add_addr_accept_max =mptcp_pm_get_add_addr_accept_max (msk); subflows_max =mptcp_pm_get_subflows_max (msk);@@ -555,10 +560,34 @@ static void mptcp_pm_nl_add_addr_received(struct mptcp_sock *msk)if (!remote.port) remote.port = sk->sk_dport;memset (&local,0 ,sizeof (local)); - local.family = remote.family; + local.addr.family = remote.family;
Quoted 8 lines
Quoted 5 lines
net/mptcp/pm_netlink.c static void mptcp_pm_nl_add_addr_received(struct mptcp_sock *msk) · line 565
Quoted 1 line
net/mptcp/pm_netlink.c +1
-0+ entries[n++] = local;If I read correctly, I think this entry should be added only if the full-mesh selection below find no other entries. Otherwise, e.g. in the simple scenario with 2 locals address, 3 subflows will be created.
local is the id 0 address, this address should always be used, and it's not on the
local_addr_list.
Uhm... if the user-space configures correctly the mptcp endpoints, every relevant address should be in local_addr_list.
e.g.
The client has 2 IPs:
192.168.255.2/24 dev eth0
192.168.254.2/24 dev eth1
The user-space should create 2 endpoints with full-mesh flags, one for each of the above IPs, at addresses creation time.
When the mptcp socket is established, it's first subflow will use as local address one of such IPs/endpoints.
If mptcp_pm_nl_add_addr_received() adds to the 'entries' array an 'IPADDRANY' address, and than the 2 addresses above, the client will end-up creating 3 subflows towards the newly signaled address, instead of the expected 2.
WDYT?
Paolo