ASoC: wcd9335: Firx some resources leak in the probe and remove function
Subsystems (4)
cover ASoC: wcd9335: Firx some resources leak in the probe and remove function
The first 2 patches are sraightforward and look logical to me.
However, the 3rd one in purely speculative. It is based on the fact that a comment states that we enable some irqs on some slave ports. That said, it writes 0xFF in some registers.
So, I guess that we should disable these irqs when the driver is removed. That said, writing 0x00 at the same place looks logical to me.
This cis untested and NOT based on any documentation. Just a blind fix. Review with care.
You'll be warned :)
Christophe JAILLET (3):
ASoC: wcd9335: Fix a double irq free in the remove function
ASoC: wcd9335: Fix a memory leak in the error handling path of the
probe function
ASoC: wcd9335: Disable irq on slave ports in the remove function
sound/soc/codecs/wcd9335.c | 23 +++++++++++++++++++++-- 1 file changed, 21 insertions(+), 2 deletions(-)
Signature · 1 line
2.30.2
PATCH 1/3 ASoC: wcd9335: Fix a double irq free in the remove function
There is no point in calling 'free_irq()' explicitly for 'WCD9335_IRQ_SLIMBUS' in the remove function.
The irqs are requested in 'wcd9335_setup_irqs()' using a resource managed function (i.e. 'devm_request_threaded_irq()'). 'wcd9335_setup_irqs()' requests all what is defined in the 'wcd9335_irqs' structure.
This structure has only one entry for 'WCD9335_IRQ_SLIMBUS'.
So 'devm_request...irq()' + explicit 'free_irq()' would lead to a double free.
Remove the unneeded 'free_irq()' from the remove function.
--- sound/soc/codecs/wcd9335.c | 1 - 1 file changed, 1 deletion(-)
sound/soc/codecs/wcd9335.c +0 -1
@@ -4869,7 +4869,6 @@ static void wcd9335_codec_remove(struct snd_soc_component *comp)struct wcd9335_codec *wcd =dev_get_drvdata (comp->dev);wcd_clsh_ctrl_free (wcd->clsh_ctrl); -free_irq (regmap_irq_get_virq (wcd->irq_data,WCD9335_IRQ_SLIMBUS ), wcd); } static int wcd9335_codec_set_sysclk(struct snd_soc_component *comp,
Signature · 1 line
2.30.2
PATCH 2/3 ASoC: wcd9335: Fix a memory leak in the error handling path of the probe function
In reply to Christophe JAILLETIf 'wcd9335_setup_irqs()' fails, me must release the memory allocated in 'wcd_clsh_ctrl_alloc()', as already done in the remove function.
Add an error handling path and the missing 'wcd_clsh_ctrl_free()' call.
--- sound/soc/codecs/wcd9335.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-)
sound/soc/codecs/wcd9335.c +10 -1
@@ -4844,6 +4844,7 @@ static void wcd9335_codec_init(struct snd_soc_component *component)static int wcd9335_codec_probe (struct snd_soc_component *component) {struct wcd9335_codec *wcd =dev_get_drvdata (component->dev); +int ret;int i;snd_soc_component_init_regmap (component, wcd->regmap);
@@ -4861,7 +4862,15 @@ static int wcd9335_codec_probe(struct snd_soc_component *component)for (i =0 ; i <NUM_CODEC_DAIS ; i++)INIT_LIST_HEAD (&wcd->dai[i].slim_ch_list); -return wcd9335_setup_irqs (wcd); + ret =wcd9335_setup_irqs (wcd); +if (ret) + goto free_clsh_ctrl; + +return 0 ; + +free_clsh_ctrl: +wcd_clsh_ctrl_free (wcd->clsh_ctrl); +return ret; }static void wcd9335_codec_remove (struct snd_soc_component *comp)
Signature · 1 line
2.30.2
PATCH 3/3 ASoC: wcd9335: Disable irq on slave ports in the remove function
In reply to Christophe JAILLETThe probe calls 'wcd9335_setup_irqs()' to enable interrupts on all slave ports.
This must be undone in the remove function.
Add a 'wcd9335_teardown_irqs()' function that undoes 'wcd9335_setup_irqs()' function, and call it from the remove function.
---
As said in the cover letter, this patch is COMPLETELY speculative. It is untested.
Review with care, because I don't know if it make sense!
--- sound/soc/codecs/wcd9335.c | 11 +++++++++++ 1 file changed, 11 insertions(+)
sound/soc/codecs/wcd9335.c +11 -0
@@ -4076,6 +4076,16 @@ static int wcd9335_setup_irqs(struct wcd9335_codec *wcd)return ret; } +static void wcd9335_teardown_irqs (struct wcd9335_codec *wcd) +{ +int i; + +/* disable interrupts on all slave ports */ +for (i =0 ; i <WCD9335_SLIM_NUM_PORT_REG ; i++) +regmap_write (wcd->if_regmap,WCD9335_SLIM_PGD_PORT_INT_EN0 + i, +0x00 ); +} +static void wcd9335_cdc_sido_ccl_enable (struct wcd9335_codec *wcd,bool ccl_flag) {
@@ -4878,6 +4888,7 @@ static void wcd9335_codec_remove(struct snd_soc_component *comp)struct wcd9335_codec *wcd =dev_get_drvdata (comp->dev);wcd_clsh_ctrl_free (wcd->clsh_ctrl); +wcd9335_teardown_irqs (wcd); } static int wcd9335_codec_set_sysclk(struct snd_soc_component *comp,
Signature · 1 line
2.30.2
From: Mark Brown,,, <[email protected]>
Quoted 10 lines · Christophe JAILLET
The first 2 patches are sraightforward and look logical to me.
However, the 3rd one in purely speculative. It is based on the fact that a comment states that we enable some irqs on some slave ports. That said, it writes
0xFFin some registers.So, I guess that we should disable these irqs when the driver is removed. That said, writing
0x00at the same place looks logical to me.[...]
Applied, thanks!
[1/3] ASoC: wcd9335: Fix a double irq free in the remove function
commit: 7a6a723e98aa45f393e6add18f7309dfffa1b0e2
[2/3] ASoC: wcd9335: Fix a memory leak in the error handling path of the probe function
commit: fc6fc81caa63900cef9ebb8b2e365c3ed5a9effb
[3/3] ASoC: wcd9335: Disable irq on slave ports in the remove function
commit: d3efd26af2e044ff2b48d38bb871630282d77e60Best regards,
Signature · 1 line
Mark Brown,,, <[email protected]>