Staging: rtl8192e: rtllib_wx
v3 cover Staging: rtl8192e: rtllib_wx
This series addresses some issues raised by chechpatch.pl and some very minor refactoring.
v2:
- The first version, only addressed coding style issues. Now, I additionally refactored rtllib_modes and its uses, since there is no need to use string formatting.
- Logically separated one assignement into two. So we dont have 'fixed' = 'disabled', which was silly.
v3:
- Fixed a checkpatch.pl warning, which was introduced with patch 1/6.
Felix Schlepper (6):
Staging: rtl8192e: Refactored rtllib_modes
Staging: rtl8192e: Avoid multiple assignments
Staging: rtl8192e: Remove unnecessary parentheses
Staging: rtl8192e: Added braces around else
Staging: rtl8192e: Remove unnecessary blank line
Staging: rtl8192e: Added spaces around '+'
drivers/staging/rtl8192e/rtllib_wx.c | 37 +++++++++++----------------- 1 file changed, 15 insertions(+), 22 deletions(-)
Signature · 1 line
2.36.1
PATCH v3 2/6 Staging: rtl8192e: Avoid multiple assignments
This addresses an issue raised by checkpatch.pl:
$ ./scripts/checkpatch.pl --terse -f drivers/staging/rtl8192e/rtllib_wx.c
CHECK: multiple assignments should be avoided--- drivers/staging/rtl8192e/rtllib_wx.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/staging/rtl8192e/rtllib_wx.c +2 -1
@@ -149,7 +149,8 @@ static inline char *rtl819x_translate_scan(struct rtllib_device *ieee, max_rate = rate; } iwe.cmd =SIOCGIWRATE ; - iwe.u.bitrate.fixed = iwe.u.bitrate.disabled =0 ; + iwe.u.bitrate.disabled =0 ; + iwe.u.bitrate.fixed =0 ; iwe.u.bitrate.value = max_rate *500000 ; start =iwe_stream_add_event_rsl (info, start, stop, &iwe,IW_EV_PARAM_LEN ); iwe.cmd =IWEVCUSTOM ;
Signature · 1 line
2.36.1
PATCH v3 1/6 Staging: rtl8192e: Refactored rtllib_modes
In reply to Felix SchlepperThe initial reason for looking at this code was an issue raised by checkpatch.pl:
$ ./scripts/checkpatch.pl --terse -f drivers/staging/rtl8192e/rtllib_wx.c
CHECK: Please use a blank line after function/struct/union/enum
declarationsThe additional blank line above the struct/before the headers is just cleaner.
However, as it turns out since there is no str formatting required One can replace the error prone str + size struct with a char array. The rest of this patch fixes the usecases.
--- drivers/staging/rtl8192e/rtllib_wx.c | 21 ++++++--------------- 1 file changed, 6 insertions(+), 15 deletions(-)
drivers/staging/rtl8192e/rtllib_wx.c +6 -15
@@ -17,17 +17,9 @@#include <linux/module.h> #include <linux/etherdevice.h> #include "rtllib.h" -struct modes_unit { -char *mode_string; -int mode_size; -}; -static struct modes_unit rtllib_modes[] = { - {"a" ,1 }, - {"b" ,1 }, - {"g" ,1 }, - {"?" ,1 }, - {"N-24G" ,5 }, - {"N-5G" ,4 }, + +static const char *const rtllib_modes[] = { +"a" ,"b" ,"g" ,"?" ,"N-24G" ,"N-5G" };#define MAX_CUSTOM_LEN 64
@@ -72,10 +64,9 @@ static inline char *rtl819x_translate_scan(struct rtllib_device *ieee,/* Add the protocol name */ iwe.cmd =SIOCGIWNAME ;for (i =0 ; i <ARRAY_SIZE (rtllib_modes); i++) { -if (network->mode&(1 <<i)) { -sprintf (pname, rtllib_modes[i].mode_string, - rtllib_modes[i].mode_size); - pname += rtllib_modes[i].mode_size; +if (network->mode &BIT (i)) { +strcpy (pname, rtllib_modes[i]); + pname +=strlen (rtllib_modes[i]); } } *pname ='\0' ;
Signature · 1 line
2.36.1
PATCH v3 3/6 Staging: rtl8192e: Remove unnecessary parentheses
In reply to Felix SchlepperThis addresses an issue raised by checkpatch.pl:
$ ./scripts/checkpatch.pl --terse -f drivers/staging/rtl8192e/rtllib_wx.c
Unnecessary parentheses around wrqu->encoding--- drivers/staging/rtl8192e/rtllib_wx.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/staging/rtl8192e/rtllib_wx.c +2 -2
@@ -277,7 +277,7 @@ int rtllib_wx_set_encode(struct rtllib_device *ieee,struct iw_request_info *info, union iwreq_data *wrqu, char *keybuf) { - struct iw_point *erq = &(wrqu->encoding); + struct iw_point *erq = &wrqu->encoding;struct net_device *dev = ieee->dev; struct rtllib_security sec = { .flags = 0
@@ -449,7 +449,7 @@ int rtllib_wx_get_encode(struct rtllib_device *ieee,struct iw_request_info *info, union iwreq_data *wrqu, char *keybuf) { - struct iw_point *erq = &(wrqu->encoding); + struct iw_point *erq = &wrqu->encoding;int len, key;struct lib80211_crypt_data *crypt;
Signature · 1 line
2.36.1
PATCH v3 4/6 Staging: rtl8192e: Added braces around else
In reply to Felix SchlepperThis addresses two issues raised by checkpatch.pl:
$ ./scripts/checkpatch.pl --terse -f drivers/staging/rtl8192e/rtllib_wx.c
CHECK: braces {} should be used on all arms of this statement
CHECK: Unbalanced braces around else statementThe coding style rule with not using unnecessary braces around if/else does not apply if only one branch is a single statement.
--- drivers/staging/rtl8192e/rtllib_wx.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)
drivers/staging/rtl8192e/rtllib_wx.c +4 -2
@@ -304,8 +304,9 @@ int rtllib_wx_set_encode(struct rtllib_device *ieee,netdev_dbg (ieee->dev,"Disabling encryption on key %d.\n" , key);lib80211_crypt_delayed_deinit (&ieee->crypt_info, crypt); - }else + }else {netdev_dbg (ieee->dev,"Disabling encryption.\n" ); + }/* Check all the keys to see if any are still configured, * and if no key index was provided, de-init them all
@@ -724,8 +725,9 @@ int rtllib_wx_set_auth(struct rtllib_device *ieee, }else if (data->value &IW_AUTH_ALG_LEAP ) { ieee->open_wep =1 ; ieee->auth_mode =2 ; - }else + }else {return -EINVAL ; + }break ;case IW_AUTH_WPA_ENABLED :
Signature · 1 line
2.36.1
PATCH v3 5/6 Staging: rtl8192e: Remove unnecessary blank line
In reply to Felix SchlepperThis addresses an issue raised by checkpatch.pl:
$ ./scripts/checkpatch.pl --terse -f drivers/staging/rtl8192e/rtllib_wx.c
CHECK: Blank lines aren't necessary before a close brace '}'--- drivers/staging/rtl8192e/rtllib_wx.c | 1 - 1 file changed, 1 deletion(-)
drivers/staging/rtl8192e/rtllib_wx.c +0 -1
@@ -601,7 +601,6 @@ int rtllib_wx_set_encode_ext(struct rtllib_device *ieee, goto done; } *crypt = new_crypt; - } if (ext->key_len > 0 && (*crypt)->ops->set_key &&
Signature · 1 line
2.36.1
PATCH v3 6/6 Staging: rtl8192e: Added spaces around '+'
In reply to Felix SchlepperThis addresses two issues raised by checkpatch.pl:
$ ./scripts/checkpatch.pl --terse -f drivers/staging/rtl8192e/rtllib_wx.c
CHECK: spaces preferred around that '+' (ctx:VxV)--- drivers/staging/rtl8192e/rtllib_wx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/staging/rtl8192e/rtllib_wx.c +1 -1
@@ -769,7 +769,7 @@ int rtllib_wx_set_gen_ie(struct rtllib_device *ieee, u8 *ie, size_t len)kfree (ieee->wps_ie); ieee->wps_ie =NULL ;if (len) { -if (len != ie[1 ]+2 ) +if (len != ie[1 ] +2 )return -EINVAL ; buf =kmemdup (ie, len,GFP_KERNEL );if (!buf)
Signature · 1 line
2.36.1
Re: [PATCH v3 1/6] Staging: rtl8192e: Refactored rtllib_modes
In reply to Felix SchlepperQuoted 48 lines · Felix Schlepper
The initial reason for looking at this code was an issue raised by checkpatch.pl:
$ ./scripts/checkpatch.pl --terse -f drivers/staging/rtl8192e/rtllib_wx.c CHECK: Please use a blank line after function/struct/union/enum declarationsThe additional blank line above the struct/before the headers is just cleaner.
However, as it turns out since there is no str formatting required One can replace the error prone str + size struct with a char array. The rest of this patch fixes the usecases.
Signed-off-by Felix Schlepper <[email protected]>--- drivers/staging/rtl8192e/rtllib_wx.c | 21 ++++++--------------- 1 file changed, 6 insertions(+), 15 deletions(-)drivers/staging/rtl8192e/rtllib_wx.c +3
-11@@ -17,17 +17,9 @@#include <linux/module.h> #include <linux/etherdevice.h> #include "rtllib.h" -struct modes_unit { -char *mode_string; -int mode_size; -}; -static struct modes_unit rtllib_modes[] = { - {"a" ,1 }, - {"b" ,1 }, - {"g" ,1 }, - {"?" ,1 }, - {"N-24G" ,5 }, - {"N-5G" ,4 }, + +static const char *const rtllib_modes[] = { +"a" ,"b" ,"g" ,"?" ,"N-24G" ,"N-5G" };#define MAX_CUSTOM_LEN 64@@ -72,10 +64,9 @@ static inline char *rtl819x_translate_scan(struct rtllib_device *ieee,/* Add the protocol name */ iwe.cmd =SIOCGIWNAME ;for (i =0 ; i <ARRAY_SIZE (rtllib_modes); i++) {
drivers/staging/rtl8192e/rtllib_wx.c static inline char *rtl819x_translate_scan(struct rtllib_device *ieee, · line 72
Quoted 10 lines
drivers/staging/rtl8192e/rtllib_wx.c +3
-4-if (network->mode&(1 <<i)) { -sprintf (pname, rtllib_modes[i].mode_string, - rtllib_modes[i].mode_size); - pname += rtllib_modes[i].mode_size; +if (network->mode &BIT (i)) { +strcpy (pname, rtllib_modes[i]); + pname +=strlen (rtllib_modes[i]); } } *pname ='\0' ;
Re: [PATCH v3 2/6] Staging: rtl8192e: Avoid multiple assignments
In reply to Felix SchlepperQuoted 15 lines · Felix Schlepper
This addresses an issue raised by checkpatch.pl:
$ ./scripts/checkpatch.pl --terse -f drivers/staging/rtl8192e/rtllib_wx.c CHECK: multiple assignments should be avoidedSigned-off-by Felix Schlepper <[email protected]>--- drivers/staging/rtl8192e/rtllib_wx.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)drivers/staging/rtl8192e/rtllib_wx.c +0
-0
drivers/staging/rtl8192e/rtllib_wx.c static inline char *rtl819x_translate_scan(struct rtllib_device *ieee, · line 156
Quoted 9 lines
drivers/staging/rtl8192e/rtllib_wx.c +2
-1@@ -149,7 +149,8 @@ static inline char *rtl819x_translate_scan(struct rtllib_device *ieee, max_rate = rate; } iwe.cmd =SIOCGIWRATE ; - iwe.u.bitrate.fixed = iwe.u.bitrate.disabled =0 ; + iwe.u.bitrate.disabled =0 ; + iwe.u.bitrate.fixed =0 ; iwe.u.bitrate.value = max_rate *500000 ; start =iwe_stream_add_event_rsl (info, start, stop, &iwe,IW_EV_PARAM_LEN ); iwe.cmd =IWEVCUSTOM ;
Re: [PATCH v3 3/6] Staging: rtl8192e: Remove unnecessary parentheses
In reply to Felix SchlepperQuoted 24 lines · Felix Schlepper
This addresses an issue raised by checkpatch.pl:
$ ./scripts/checkpatch.pl --terse -f drivers/staging/rtl8192e/rtllib_wx.c Unnecessary parentheses around wrqu->encodingSigned-off-by Felix Schlepper <[email protected]>--- drivers/staging/rtl8192e/rtllib_wx.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)drivers/staging/rtl8192e/rtllib_wx.c +1
-1@@ -277,7 +277,7 @@ int rtllib_wx_set_encode(struct rtllib_device *ieee,struct iw_request_info *info, union iwreq_data *wrqu, char *keybuf) { - struct iw_point *erq = &(wrqu->encoding); + struct iw_point *erq = &wrqu->encoding;struct net_device *dev = ieee->dev; struct rtllib_security sec = { .flags = 0
drivers/staging/rtl8192e/rtllib_wx.c int rtllib_wx_get_encode(struct rtllib_device *ieee, · line 455
Quoted 8 lines
drivers/staging/rtl8192e/rtllib_wx.c +1
-1@@ -449,7 +449,7 @@ int rtllib_wx_get_encode(struct rtllib_device *ieee,struct iw_request_info *info, union iwreq_data *wrqu, char *keybuf) { - struct iw_point *erq = &(wrqu->encoding); + struct iw_point *erq = &wrqu->encoding;int len, key;struct lib80211_crypt_data *crypt;
Re: [PATCH v3 4/6] Staging: rtl8192e: Added braces around else
In reply to Felix SchlepperQuoted 30 lines · Felix Schlepper
This addresses two issues raised by checkpatch.pl:
$ ./scripts/checkpatch.pl --terse -f drivers/staging/rtl8192e/rtllib_wx.c CHECK: braces {} should be used on all arms of this statement CHECK: Unbalanced braces around else statementThe coding style rule with not using unnecessary braces around if/else does not apply if only one branch is a single statement.
Signed-off-by Felix Schlepper <[email protected]>--- drivers/staging/rtl8192e/rtllib_wx.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)drivers/staging/rtl8192e/rtllib_wx.c +2
-1@@ -304,8 +304,9 @@ int rtllib_wx_set_encode(struct rtllib_device *ieee,netdev_dbg (ieee->dev,"Disabling encryption on key %d.\n" , key);lib80211_crypt_delayed_deinit (&ieee->crypt_info, crypt); - }else + }else {netdev_dbg (ieee->dev,"Disabling encryption.\n" ); + }/* Check all the keys to see if any are still configured, * and if no key index was provided, de-init them all
drivers/staging/rtl8192e/rtllib_wx.c int rtllib_wx_set_auth(struct rtllib_device *ieee, · line 733
Quoted 10 lines
drivers/staging/rtl8192e/rtllib_wx.c +2
-1@@ -724,8 +725,9 @@ int rtllib_wx_set_auth(struct rtllib_device *ieee, }else if (data->value &IW_AUTH_ALG_LEAP ) { ieee->open_wep =1 ; ieee->auth_mode =2 ; - }else + }else {return -EINVAL ; + }break ;case IW_AUTH_WPA_ENABLED :
Re: [PATCH v3 5/6] Staging: rtl8192e: Remove unnecessary blank line
In reply to Felix SchlepperQuoted 15 lines · Felix Schlepper
This addresses an issue raised by checkpatch.pl:
$ ./scripts/checkpatch.pl --terse -f drivers/staging/rtl8192e/rtllib_wx.c CHECK: Blank lines aren't necessary before a close brace '}'Signed-off-by Felix Schlepper <[email protected]>--- drivers/staging/rtl8192e/rtllib_wx.c | 1 - 1 file changed, 1 deletion(-)drivers/staging/rtl8192e/rtllib_wx.c +0
-0
drivers/staging/rtl8192e/rtllib_wx.c int rtllib_wx_set_encode_ext(struct rtllib_device *ieee, · line 606
Quoted 7 lines
drivers/staging/rtl8192e/rtllib_wx.c +0
-1@@ -601,7 +601,6 @@ int rtllib_wx_set_encode_ext(struct rtllib_device *ieee, goto done; } *crypt = new_crypt; - } if (ext->key_len > 0 && (*crypt)->ops->set_key &&
Re: [PATCH v3 6/6] Staging: rtl8192e: Added spaces around '+'
In reply to Felix SchlepperQuoted 15 lines · Felix Schlepper
This addresses two issues raised by checkpatch.pl:
$ ./scripts/checkpatch.pl --terse -f drivers/staging/rtl8192e/rtllib_wx.c CHECK: spaces preferred around that '+' (ctx:VxV)Signed-off-by Felix Schlepper <[email protected]>--- drivers/staging/rtl8192e/rtllib_wx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)drivers/staging/rtl8192e/rtllib_wx.c +0
-0
drivers/staging/rtl8192e/rtllib_wx.c int rtllib_wx_set_gen_ie(struct rtllib_device *ieee, u8 *ie, size_t len) · line 775
Quoted 8 lines
drivers/staging/rtl8192e/rtllib_wx.c +1
-1@@ -769,7 +769,7 @@ int rtllib_wx_set_gen_ie(struct rtllib_device *ieee, u8 *ie, size_t len)kfree (ieee->wps_ie); ieee->wps_ie =NULL ;if (len) { -if (len != ie[1 ]+2 ) +if (len != ie[1 ] +2 )return -EINVAL ; buf =kmemdup (ie, len,GFP_KERNEL );if (!buf)
Quoted 21 lines · Felix Schlepper
This series addresses some issues raised by chechpatch.pl and some very minor refactoring.
v2:
- The first version, only addressed coding style issues. Now, I additionally refactoredrtllib_modesand its uses, since there is no need to use string formatting.
- Logically separated one assignement into two. So we dont have 'fixed' = 'disabled', which was silly.v3:
- Fixed a checkpatch.pl warning, which was introduced with patch 1/6.Felix Schlepper (6):
Staging: rtl8192e: Refactoredrtllib_modes
Staging: rtl8192e: Avoid multiple assignments
Staging: rtl8192e: Remove unnecessary parentheses
Staging: rtl8192e: Added braces around else
Staging: rtl8192e: Remove unnecessary blank line
Staging: rtl8192e: Added spaces around '+'
Quoted 3 lines
drivers/staging/rtl8192e/rtllib_wx.c | 37 +++++++++++----------------- 1 file changed, 15 insertions(+), 22 deletions(-)
Sorry for sending one email for each patch. Next time I will just send one mail for one patch series.
When compiling I saw that the driver is divided into more modules. So the r8192e_pci.ko is not touched by this patch series.
kernel@matrix-ESPRIMO-P710:~/Documents/git/kernels/staging$ make -C . M=drivers/staging/rtl8192e make: Entering directory '/home/kernel/Documents/git/kernels/staging' CC [M] drivers/staging/rtl8192e/rtllib_wx.o LD [M] drivers/staging/rtl8192e/rtllib.o MODPOST drivers/staging/rtl8192e/Module.symvers CC [M] drivers/staging/rtl8192e/rtllib.mod.o LD [M] drivers/staging/rtl8192e/rtllib.ko make: Leaving directory '/home/kernel/Documents/git/kernels/staging'
kernel@matrix-ESPRIMO-P710:~/Documents/git/kernels/staging$ sudo insmod drivers/staging/rtl8192e/rtllib.ko kernel@matrix-ESPRIMO-P710:~/Documents/git/kernels/staging$ sudo insmod drivers/staging/rtl8192e/rtl8192e/r8192e_pci.ko