Skip to contentSkip to conversation

ARM/arm64: defconfig updates for Renesas platforms

PATCH New Geert Uytterhoeven 1 participant 4 messages Mar 8, 2023

Subsystems (2)
lore
Share & tools
lore

Geert Uytterhoeven

author maintainer
#0 lore raw

cover ARM/arm64: defconfig updates for Renesas platforms

Hi all,

This patch series contains updates related to Renesas platforms for the various defconfig files.

I plan to qeueue these in renesas-devel-for-v6.4.

Thanks for your comments!

Geert Uytterhoeven (3):
ARM: shmobile: defconfig: Refresh for v6.3-rc1
ARM: multi_v7_defconfig: Enable additional support for RZ/N1 platforms
arm64: defconfig: Enable RZ/V2M xHCI and USB3.1 DRD controller support

 arch/arm/configs/multi_v7_defconfig | 6 ++++++
 arch/arm/configs/shmobile_defconfig | 2 ++
 arch/arm64/configs/defconfig        | 2 ++
 3 files changed, 10 insertions(+)
Signature · 17 lines
2.34.1

Gr{oetje,eeting}s,

						Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected]

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
							    -- Linus Torvalds

_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
author maintainer
#1 lore raw

PATCH 1/3 ARM: shmobile: defconfig: Refresh for v6.3-rc1

Refresh the defconfig for Renesas ARM systems:
- Disable CONFIG_SERIAL_8250_PCI1XXXX (No Microchip 8250 based serial

    ports),

- Enable RZ/N1 USB Function controller support.

---
 arch/arm/configs/shmobile_defconfig | 2 ++
 1 file changed, 2 insertions(+)
arch/arm/configs/shmobile_defconfig +2 -0
index 751d939fcb761b31..0b21c0a4758286ef 100644
@@ -76,6 +76,7 @@ CONFIG_SERIAL_8250=y
 # CONFIG_SERIAL_8250_16550A_VARIANTS is not set
 CONFIG_SERIAL_8250_CONSOLE=y
 # CONFIG_SERIAL_8250_PCI is not set
+# CONFIG_SERIAL_8250_PCI1XXXX is not set
 CONFIG_SERIAL_8250_DW=y
 CONFIG_SERIAL_8250_EM=y
 # CONFIG_SERIAL_8250_PERICOM is not set
@@ -168,6 +169,7 @@ CONFIG_USB_R8A66597_HCD=y
 CONFIG_USB_RENESAS_USBHS=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_RENESAS_USBHS_UDC=y
+CONFIG_USB_RENESAS_USBF=y
 CONFIG_USB_ETH=y
 CONFIG_MMC=y
 CONFIG_MMC_SDHI=y
Signature · 1 line
2.34.1
author maintainer
#2 lore raw

PATCH 2/3 ARM: multi_v7_defconfig: Enable additional support for RZ/N1 platforms

In reply to Geert Uytterhoeven

Increase build and test coverage by enabling support for the A5PSW Ethernet switch, pin, watchdog, USB Function, RTC, and DMA mux controllers on the Renesas RZ/N1 SoC and the RZN1D-DB development board.

All drivers for the above are modular, except for the pin control driver.

---
 arch/arm/configs/multi_v7_defconfig | 6 ++++++
 1 file changed, 6 insertions(+)
arch/arm/configs/multi_v7_defconfig +6 -0
index 084cc612ea23a1c7..42ff3d5a5198cee8 100644
@@ -251,6 +251,7 @@ CONFIG_B53_SPI_DRIVER=m
 CONFIG_B53_MDIO_DRIVER=m
 CONFIG_B53_MMAP_DRIVER=m
 CONFIG_NET_DSA_BCM_SF2=m
+CONFIG_NET_DSA_RZN1_A5PSW=m
 CONFIG_SUN4I_EMAC=y
 CONFIG_SPI_AX88796C=m
 CONFIG_BCMGENET=m
@@ -474,6 +475,7 @@ CONFIG_PINCTRL_MSM8916=y
 CONFIG_PINCTRL_QCOM_SPMI_PMIC=y
 CONFIG_PINCTRL_QCOM_SSBI_PMIC=y
 CONFIG_PINCTRL_RZA2=y
+CONFIG_PINCTRL_RZN1=y
 CONFIG_GPIO_ASPEED_SGPIO=y
 CONFIG_GPIO_DAVINCI=y
 CONFIG_GPIO_DWAPB=y
@@ -563,6 +565,7 @@ CONFIG_MESON_WATCHDOG=y
 CONFIG_DIGICOLOR_WATCHDOG=y
 CONFIG_RENESAS_WDT=m
 CONFIG_RENESAS_RZAWDT=m
+CONFIG_RENESAS_RZN1WDT=m
 CONFIG_STPMIC1_WATCHDOG=y
 CONFIG_PM8916_WATCHDOG=m
 CONFIG_BCM47XX_WDT=y
@@ -873,6 +876,7 @@ CONFIG_USB_ISP1301=y
 CONFIG_USB_MXS_PHY=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_RENESAS_USBHS_UDC=m
+CONFIG_USB_RENESAS_USBF=m
 CONFIG_USB_ASPEED_VHUB=m
 CONFIG_USB_CONFIGFS=m
 CONFIG_USB_CONFIGFS_SERIAL=y
@@ -989,6 +993,7 @@ CONFIG_RTC_DRV_SH=m
 CONFIG_RTC_DRV_PL031=y
 CONFIG_RTC_DRV_AT91RM9200=m
 CONFIG_RTC_DRV_AT91SAM9=m
+CONFIG_RTC_DRV_RZN1=m
 CONFIG_RTC_DRV_VT8500=y
 CONFIG_RTC_DRV_SUNXI=y
 CONFIG_RTC_DRV_MV=y
@@ -1020,6 +1025,7 @@ CONFIG_UNIPHIER_MDMAC=y
 CONFIG_XILINX_DMA=y
 CONFIG_QCOM_BAM_DMA=y
 CONFIG_DW_DMAC=y
+CONFIG_RZN1_DMAMUX=m
 CONFIG_RCAR_DMAC=y
 CONFIG_RENESAS_USB_DMAC=m
 CONFIG_VIRTIO_PCI=y
Signature · 1 line
2.34.1
author maintainer
#3 lore raw

PATCH 3/3 arm64: defconfig: Enable RZ/V2M xHCI and USB3.1 DRD controller support

In reply to Geert Uytterhoeven

Increase build and test coverage by enabling RZ/V2M xHCI and USB3.1 DRD controller support.

Note that the latter cannot be modular, as USB_XHCI_RCAR is builtin.

---
 arch/arm64/configs/defconfig | 2 ++
 1 file changed, 2 insertions(+)
arch/arm64/configs/defconfig +2 -0
index ef88f86fbfda0215..3b5a8298c44e7c91 100644
@@ -908,6 +908,7 @@ CONFIG_USB=y
 CONFIG_USB_OTG=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_PCI_RENESAS=m
+CONFIG_USB_XHCI_RZV2M=y
 CONFIG_USB_XHCI_TEGRA=y
 CONFIG_USB_BRCMSTB=m
 CONFIG_USB_EHCI_HCD=y
@@ -943,6 +944,7 @@ CONFIG_USB_ONBOARD_HUB=m
 CONFIG_NOP_USB_XCEIV=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_RENESAS_USBHS_UDC=m
+CONFIG_USB_RZV2M_USB3DRD=y
 CONFIG_USB_RENESAS_USB3=m
 CONFIG_USB_TEGRA_XUDC=m
 CONFIG_USB_CONFIGFS=m
Signature · 7 lines
2.34.1


_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel