Skip to contentSkip to conversation

Add Loongson HD Audio support

PATCH Superseded Yanteng Si 2 participants 9 messages May 31, 2023 – Jun 6, 2023

Subsystems (3)

v1 of 3 Superseded Latest is v3 →

lore
Share & tools
lore

Yanteng Si

author
#0 lore raw

cover Add Loongson HD Audio support

* The Loongson HDA controller is compatible with High Definition Audio Specification Revision 1.0a.
See <https://loongson.github.io/LoongArch-Documentation/Loongson-
7A1000-usermanual-EN.html#hda-controller>

Yanteng Si (4):
ALSA: hda: Add Loongson LS7A HD-Audio support
ALSA: hda: Using polling mode for loongson controller by default
ALSA: hda: Workaround for SDnCTL register on loongson controller
ALSA: hda/intel: Workaround for WALLCLK register for loongson
controller

 include/linux/pci_ids.h        |  3 +++
 sound/hda/hdac_controller.c    |  8 +++++++-
 sound/hda/hdac_device.c        |  1 +
 sound/hda/hdac_stream.c        |  8 +++++++-
 sound/pci/hda/hda_controller.h |  1 +
 sound/pci/hda/hda_intel.c      | 10 ++++++++++
 sound/pci/hda/patch_hdmi.c     |  1 +
 7 files changed, 30 insertions(+), 2 deletions(-)
Signature · 1 line
2.31.4
author
#1 lore raw

PATCH 1/4 ALSA: hda: Add Loongson LS7A HD-Audio support

Add the new PCI ID 0x0014 0x7a07 and the new PCI ID 0x0014 0x7a37 Loongson HDA controller.

---
 include/linux/pci_ids.h        | 3 +++
 sound/hda/hdac_device.c        | 1 +
 sound/pci/hda/hda_controller.h | 1 +
 sound/pci/hda/hda_intel.c      | 7 +++++++
 sound/pci/hda/patch_hdmi.c     | 1 +
 5 files changed, 13 insertions(+)
include/linux/pci_ids.h +3 -0
index e43ab203054a..f2aecb78f628 100644
@@ -158,6 +158,9 @@
 
 #define PCI_VENDOR_ID_LOONGSON		0x0014
 
+#define PCI_DEVICE_ID_LOONGSON_HDA      0x7a07
+#define PCI_DEVICE_ID_LOONGSON_HDMI     0x7a37
+
 #define PCI_VENDOR_ID_SOLIDIGM		0x025e
 
 #define PCI_VENDOR_ID_TTTECH		0x0357
sound/hda/hdac_device.c +1 -0
index 6c043fbd606f..bbf7bcdb449a 100644
@@ -645,6 +645,7 @@ struct hda_vendor_id {
 };
 
 static const struct hda_vendor_id hda_vendor_ids[] = {
+	{ 0x0014, "Loongson" },
 	{ 0x1002, "ATI" },
 	{ 0x1013, "Cirrus Logic" },
 	{ 0x1057, "Motorola" },
sound/pci/hda/hda_controller.h +1 -0
index 8556031bcd68..1fd60246412f 100644
@@ -45,6 +45,7 @@
 #define AZX_DCAPS_CORBRP_SELF_CLEAR (1 << 28)	/* CORBRP clears itself after reset */
 #define AZX_DCAPS_NO_MSI64      (1 << 29)	/* Stick to 32-bit MSIs */
 #define AZX_DCAPS_SEPARATE_STREAM_TAG	(1 << 30) /* capture and playback use separate stream tag */
+#define AZX_DCAPS_LOONGSON_WORKAROUND (1 << 31)    /* Loongson workaround */
 
 enum {
 	AZX_SNOOP_TYPE_NONE,
sound/pci/hda/hda_intel.c +7 -0
index 3226691ac923..f28806b3e308 100644
@@ -237,6 +237,7 @@ enum {
 	AZX_DRIVER_CTHDA,
 	AZX_DRIVER_CMEDIA,
 	AZX_DRIVER_ZHAOXIN,
+	AZX_DRIVER_LOONGSON,
 	AZX_DRIVER_GENERIC,
 	AZX_NUM_DRIVERS, /* keep this as last entry */
 };
@@ -360,6 +361,7 @@ static const char * const driver_short_names[] = {
 	[AZX_DRIVER_CTHDA] = "HDA Creative",
 	[AZX_DRIVER_CMEDIA] = "HDA C-Media",
 	[AZX_DRIVER_ZHAOXIN] = "HDA Zhaoxin",
+	[AZX_DRIVER_LOONGSON] = "HDA Loongson",
 	[AZX_DRIVER_GENERIC] = "HD-Audio Generic",
 };
 
@@ -2809,6 +2811,11 @@ static const struct pci_device_id azx_ids[] = {
 	  .driver_data = AZX_DRIVER_GENERIC | AZX_DCAPS_PRESET_ATI_HDMI },
 	/* Zhaoxin */
 	{ PCI_DEVICE(0x1d17, 0x3288), .driver_data = AZX_DRIVER_ZHAOXIN },
+	/* Loongson HDAudio*/
+	{PCI_DEVICE(PCI_VENDOR_ID_LOONGSON, PCI_DEVICE_ID_LOONGSON_HDA),
+	  .driver_data = AZX_DRIVER_LOONGSON | AZX_DCAPS_LOONGSON_WORKAROUND },
+	{PCI_DEVICE(PCI_VENDOR_ID_LOONGSON, PCI_DEVICE_ID_LOONGSON_HDMI),
+	  .driver_data = AZX_DRIVER_LOONGSON | AZX_DCAPS_LOONGSON_WORKAROUND },
 	{ 0, }
 };
 MODULE_DEVICE_TABLE(pci, azx_ids);
sound/pci/hda/patch_hdmi.c +1 -0
index 5c0b1a09fd57..260d3e64f658 100644
@@ -4505,6 +4505,7 @@ static int patch_gf_hdmi(struct hda_codec *codec)
  * patch entries
  */
 static const struct hda_device_id snd_hda_id_hdmi[] = {
+HDA_CODEC_ENTRY(0x00147a47, "Loongson HDMI",	patch_generic_hdmi),
 HDA_CODEC_ENTRY(0x1002793c, "RS600 HDMI",	patch_atihdmi),
 HDA_CODEC_ENTRY(0x10027919, "RS600 HDMI",	patch_atihdmi),
 HDA_CODEC_ENTRY(0x1002791a, "RS690/780 HDMI",	patch_atihdmi),
Signature · 1 line
2.31.4
author
#2 lore raw

PATCH 2/4 ALSA: hda: Using polling mode for loongson controller by default

In reply to Yanteng Si

On loongson controller, RIRBSTS.RINTFL cannot be cleared, azx_interrupt() is called all the time. We disable RIRB interrupt, and use polling mode by default.

---
 sound/hda/hdac_controller.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)
sound/hda/hdac_controller.c +7 -1
index 3c7af6558249..dbaa19cb8162 100644
@@ -10,6 +10,7 @@
 #include <sound/hdaudio.h>
 #include <sound/hda_register.h>
 #include "local.h"
+#include "../pci/hda/hda_controller.h"
 
 /* clear CORB read pointer properly */
 static void azx_clear_corbrp(struct hdac_bus *bus)
@@ -42,6 +43,8 @@ static void azx_clear_corbrp(struct hdac_bus *bus)
  */
 void snd_hdac_bus_init_cmd_io(struct hdac_bus *bus)
 {
+	struct azx *chip = bus_to_azx(bus);
+
 	WARN_ON_ONCE(!bus->rb.area);
 
 	spin_lock_irq(&bus->reg_lock);
@@ -79,7 +82,10 @@ void snd_hdac_bus_init_cmd_io(struct hdac_bus *bus)
 	/* set N=1, get RIRB response interrupt for new entry */
 	snd_hdac_chip_writew(bus, RINTCNT, 1);
 	/* enable rirb dma and response irq */
-	snd_hdac_chip_writeb(bus, RIRBCTL, AZX_RBCTL_DMA_EN | AZX_RBCTL_IRQ_EN);
+	if (chip->driver_caps & AZX_DCAPS_LOONGSON_WORKAROUND)
+		snd_hdac_chip_writeb(bus, RIRBCTL, AZX_RBCTL_DMA_EN);
+	else
+		snd_hdac_chip_writeb(bus, RIRBCTL, AZX_RBCTL_DMA_EN | AZX_RBCTL_IRQ_EN);
 	/* Accept unsolicited responses */
 	snd_hdac_chip_updatel(bus, GCTL, AZX_GCTL_UNSOL, AZX_GCTL_UNSOL);
 	spin_unlock_irq(&bus->reg_lock);
Signature · 1 line
2.31.4
#3 lore raw

Re: [PATCH 2/4] ALSA: hda: Using polling mode for loongson controller by default

Quoted 24 lines · Yanteng Si

On loongson controller, RIRBSTS.RINTFL cannot be cleared, azx_interrupt() is called all the time. We disable RIRB interrupt, and use polling mode by default.

---
 sound/hda/hdac_controller.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)
sound/hda/hdac_controller.c +1 -0
index 3c7af6558249..dbaa19cb8162 100644
@@ -10,6 +10,7 @@
 #include <sound/hdaudio.h>
 #include <sound/hda_register.h>
 #include "local.h"
+#include "../pci/hda/hda_controller.h"
 
 /* clear CORB read pointer properly */
 static void azx_clear_corbrp(struct hdac_bus *bus)

sound/hda/hdac_controller.c static void azx_clear_corbrp(struct hdac_bus *bus) · line 46

Quoted 4 lines
sound/hda/hdac_controller.c +1 -0
@@ -42,6 +43,8 @@ static void azx_clear_corbrp(struct hdac_bus *bus)
  */
 void snd_hdac_bus_init_cmd_io(struct hdac_bus *bus)
 {
+	struct azx *chip = bus_to_azx(bus);

You can't convert in this way in the generic HD-audio bus code in sound/hda/*. The struct azx is specific to sound/pci/hda/*.

sound/hda/hdac_controller.c void snd_hdac_bus_init_cmd_io(struct hdac_bus *bus) · line 88

Quoted 12 lines
sound/hda/hdac_controller.c +4 -1
 	WARN_ON_ONCE(!bus->rb.area);
 
 	spin_lock_irq(&bus->reg_lock);
@@ -79,7 +82,10 @@ void snd_hdac_bus_init_cmd_io(struct hdac_bus *bus)
 	/* set N=1, get RIRB response interrupt for new entry */
 	snd_hdac_chip_writew(bus, RINTCNT, 1);
 	/* enable rirb dma and response irq */
-	snd_hdac_chip_writeb(bus, RIRBCTL, AZX_RBCTL_DMA_EN | AZX_RBCTL_IRQ_EN);
+	if (chip->driver_caps & AZX_DCAPS_LOONGSON_WORKAROUND)
+		snd_hdac_chip_writeb(bus, RIRBCTL, AZX_RBCTL_DMA_EN);
+	else
+		snd_hdac_chip_writeb(bus, RIRBCTL, AZX_RBCTL_DMA_EN | AZX_RBCTL_IRQ_EN);

That is, for some device-specific workaround like this, you'd need to introduce a new flag in struct hdac_bus, set up in the sound/pci/hda/hda_intel.c instead.

thanks,

Takashi

author
#4 lore raw

Re: [PATCH 2/4] ALSA: hda: Using polling mode for loongson controller by default

Quoted 22 lines · Takashi Iwai
Quoted 20 lines · Yanteng Si

On loongson controller, RIRBSTS.RINTFL cannot be cleared, azx_interrupt() is called all the time. We disable RIRB interrupt, and use polling mode by default.

---
  sound/hda/hdac_controller.c | 8 +++++++-
  1 file changed, 7 insertions(+), 1 deletion(-)
sound/hda/hdac_controller.c +1 -0
index 3c7af6558249..dbaa19cb8162 100644
@@ -10,6 +10,7 @@
  #include <sound/hdaudio.h>
  #include <sound/hda_register.h>
  #include "local.h"
+#include "../pci/hda/hda_controller.h"
 
Quoted 9 lines

sound/hda/hdac_controller.c static void azx_clear_corbrp(struct hdac_bus *bus) · line 46

Quoted 7 lines
sound/hda/hdac_controller.c +1 -0
  /* clear CORB read pointer properly */
  static void azx_clear_corbrp(struct hdac_bus *bus)
@@ -42,6 +43,8 @@ static void azx_clear_corbrp(struct hdac_bus *bus)
   */
  void snd_hdac_bus_init_cmd_io(struct hdac_bus *bus)
  {
+	struct azx *chip = bus_to_azx(bus);

You can't convert in this way in the generic HD-audio bus code in sound/hda/*. The struct azx is specific to sound/pci/hda/*.

I see!

Quoted 4 lines
Quoted 4 lines
sound/hda/hdac_controller.c +0 -0
  	WARN_ON_ONCE(!bus->rb.area);
 
Quoted 13 lines

sound/hda/hdac_controller.c void snd_hdac_bus_init_cmd_io(struct hdac_bus *bus) · line 88

Quoted 10 lines
sound/hda/hdac_controller.c +4 -1
  	spin_lock_irq(&bus->reg_lock);
@@ -79,7 +82,10 @@ void snd_hdac_bus_init_cmd_io(struct hdac_bus *bus)
  	/* set N=1, get RIRB response interrupt for new entry */
  	snd_hdac_chip_writew(bus, RINTCNT, 1);
  	/* enable rirb dma and response irq */
-	snd_hdac_chip_writeb(bus, RIRBCTL, AZX_RBCTL_DMA_EN | AZX_RBCTL_IRQ_EN);
+	if (chip->driver_caps & AZX_DCAPS_LOONGSON_WORKAROUND)
+		snd_hdac_chip_writeb(bus, RIRBCTL, AZX_RBCTL_DMA_EN);
+	else
+		snd_hdac_chip_writeb(bus, RIRBCTL, AZX_RBCTL_DMA_EN | AZX_RBCTL_IRQ_EN);

That is, for some device-specific workaround like this, you'd need to introduce a new flag in struct hdac_bus, set up in the sound/pci/hda/hda_intel.c instead.

OK! I will try to put your ideas into practice.

Thanks,

Yanteng

Quoted 5 lines

thanks,

Takashi

author
#5 lore raw

PATCH 3/4 ALSA: hda: Workaround for SDnCTL register on loongson controller

In reply to Yanteng Si

On loongson controller, after calling snd_hdac_stream_updateb() to enable DMA engine, the SDnCTL.STRM will become to zero. We need to access SDnCTL in dword to keep SDnCTL.STRM is not changed.

---
 sound/hda/hdac_stream.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)
sound/hda/hdac_stream.c +7 -1
index 1f56fd33b9af..90fbf9fea2b3 100644
@@ -13,6 +13,7 @@
 #include <sound/hdaudio.h>
 #include <sound/hda_register.h>
 #include "trace.h"
+#include "../pci/hda/hda_controller.h"
 
 /*
  * the hdac_stream library is intended to be used with the following
@@ -130,6 +131,7 @@ EXPORT_SYMBOL_GPL(snd_hdac_stream_init);
 void snd_hdac_stream_start(struct hdac_stream *azx_dev)
 {
 	struct hdac_bus *bus = azx_dev->bus;
+	struct azx *chip = bus_to_azx(bus);
 	int stripe_ctl;
 
 	trace_snd_hdac_stream_start(bus, azx_dev);
@@ -150,7 +152,11 @@ void snd_hdac_stream_start(struct hdac_stream *azx_dev)
 					stripe_ctl);
 	}
 	/* set DMA start and interrupt mask */
-	snd_hdac_stream_updateb(azx_dev, SD_CTL,
+	if (chip->driver_caps & AZX_DCAPS_LOONGSON_WORKAROUND)
+		snd_hdac_stream_updatel(azx_dev, SD_CTL,
+				0, SD_CTL_DMA_START | SD_INT_MASK);
+	else
+		snd_hdac_stream_updateb(azx_dev, SD_CTL,
 				0, SD_CTL_DMA_START | SD_INT_MASK);
 	azx_dev->running = true;
 }
Signature · 1 line
2.31.4
#6 lore raw

Re: [PATCH 3/4] ALSA: hda: Workaround for SDnCTL register on loongson controller

Quoted 32 lines · Yanteng Si

On loongson controller, after calling snd_hdac_stream_updateb() to enable DMA engine, the SDnCTL.STRM will become to zero. We need to access SDnCTL in dword to keep SDnCTL.STRM is not changed.

---
 sound/hda/hdac_stream.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)
sound/hda/hdac_stream.c +2 -0
index 1f56fd33b9af..90fbf9fea2b3 100644
@@ -13,6 +13,7 @@
 #include <sound/hdaudio.h>
 #include <sound/hda_register.h>
 #include "trace.h"
+#include "../pci/hda/hda_controller.h"
 
 /*
  * the hdac_stream library is intended to be used with the following
@@ -130,6 +131,7 @@ EXPORT_SYMBOL_GPL(snd_hdac_stream_init);
 void snd_hdac_stream_start(struct hdac_stream *azx_dev)
 {
 	struct hdac_bus *bus = azx_dev->bus;
+	struct azx *chip = bus_to_azx(bus);
 	int stripe_ctl;
 
 	trace_snd_hdac_stream_start(bus, azx_dev);

sound/hda/hdac_stream.c void snd_hdac_stream_start(struct hdac_stream *azx_dev) · line 160

Quoted 10 lines
sound/hda/hdac_stream.c +5 -1
@@ -150,7 +152,11 @@ void snd_hdac_stream_start(struct hdac_stream *azx_dev)
 					stripe_ctl);
 	}
 	/* set DMA start and interrupt mask */
-	snd_hdac_stream_updateb(azx_dev, SD_CTL,
+	if (chip->driver_caps & AZX_DCAPS_LOONGSON_WORKAROUND)
+		snd_hdac_stream_updatel(azx_dev, SD_CTL,
+				0, SD_CTL_DMA_START | SD_INT_MASK);
+	else
+		snd_hdac_stream_updateb(azx_dev, SD_CTL,
 				0, SD_CTL_DMA_START | SD_INT_MASK);

Similarly like the patch 2, this has to be handled with a new flag added to struct hdac_bus.

Takashi

author
#7 lore raw

Re: [PATCH 3/4] ALSA: hda: Workaround for SDnCTL register on loongson controller

Quoted 31 lines · Takashi Iwai
Quoted 29 lines · Yanteng Si

On loongson controller, after calling snd_hdac_stream_updateb() to enable DMA engine, the SDnCTL.STRM will become to zero. We need to access SDnCTL in dword to keep SDnCTL.STRM is not changed.

---
  sound/hda/hdac_stream.c | 8 +++++++-
  1 file changed, 7 insertions(+), 1 deletion(-)
sound/hda/hdac_stream.c +2 -0
index 1f56fd33b9af..90fbf9fea2b3 100644
@@ -13,6 +13,7 @@
  #include <sound/hdaudio.h>
  #include <sound/hda_register.h>
  #include "trace.h"
+#include "../pci/hda/hda_controller.h"
 
  /*
   * the hdac_stream library is intended to be used with the following
@@ -130,6 +131,7 @@ EXPORT_SYMBOL_GPL(snd_hdac_stream_init);
  void snd_hdac_stream_start(struct hdac_stream *azx_dev)
  {
  	struct hdac_bus *bus = azx_dev->bus;
+	struct azx *chip = bus_to_azx(bus);
  	int stripe_ctl;
 
Quoted 14 lines

sound/hda/hdac_stream.c void snd_hdac_stream_start(struct hdac_stream *azx_dev) · line 160

Quoted 12 lines
sound/hda/hdac_stream.c +5 -1
  	trace_snd_hdac_stream_start(bus, azx_dev);
@@ -150,7 +152,11 @@ void snd_hdac_stream_start(struct hdac_stream *azx_dev)
  					stripe_ctl);
  	}
  	/* set DMA start and interrupt mask */
-	snd_hdac_stream_updateb(azx_dev, SD_CTL,
+	if (chip->driver_caps & AZX_DCAPS_LOONGSON_WORKAROUND)
+		snd_hdac_stream_updatel(azx_dev, SD_CTL,
+				0, SD_CTL_DMA_START | SD_INT_MASK);
+	else
+		snd_hdac_stream_updateb(azx_dev, SD_CTL,
  				0, SD_CTL_DMA_START | SD_INT_MASK);

Similarly like the patch 2, this has to be handled with a new flag added to struct hdac_bus.

Okay, I'll do it right now.

Thanks,

Yanteng

Quoted 3 lines

Takashi

author
#8 lore raw

PATCH 4/4 ALSA: hda/intel: Workaround for WALLCLK register for loongson controller

In reply to Yanteng Si

On loongson controller, the value of WALLCLK register is always 0, which is meaningless, so we return directly.

---
 sound/pci/hda/hda_intel.c | 3 +++
 1 file changed, 3 insertions(+)
sound/pci/hda/hda_intel.c +3 -0
index f28806b3e308..6df9ec999e88 100644
@@ -655,6 +655,9 @@ static int azx_position_ok(struct azx *chip, struct azx_dev *azx_dev)
 	unsigned int pos;
 	snd_pcm_uframes_t hwptr, target;
 
+	if (chip->driver_caps & AZX_DCAPS_LOONGSON_WORKAROUND)
+		return 1;
+
 	wallclk = azx_readl(chip, WALLCLK) - azx_dev->core.start_wallclk;
 	if (wallclk < (azx_dev->core.period_wallclk * 2) / 3)
 		return -1;	/* bogus (too early) interrupt */
Signature · 1 line
2.31.4