Skip to contentSkip to conversation

arm64: zynqmp: Misc zynqmp changes

PATCH Applied Michal Simek 1 participant 3 messages Jun 5, 2023 – Jul 10, 2023

Subsystems (2)
lore
Share & tools
lore
author maintainer
#1 lore raw

PATCH v3 1/1 arm64: zynqmp: Add L2 cache nodes

In reply to Michal Simek

From: Radhey Shyam Pandey <[email protected]>

Describe SoC L2 cache hierarchy.

---

Changes in v3:
- Add missing cache-unified

Changes in v2:
- Update commit message to remove Linux part - reported by Laurent

Linux kernel throws "cacheinfo: Unable to detect cache hierarchy for CPU 0" warning when booting on zu+ Soc. To fix it add the L2 cache node and let each CPU point to it.

---
 arch/arm64/boot/dts/xilinx/zynqmp.dtsi | 10 ++++++++++
 1 file changed, 10 insertions(+)
arch/arm64/boot/dts/xilinx/zynqmp.dtsi +10 -0
index 02cfcc716936..394db49ac6cb 100644
@@ -33,6 +33,7 @@ cpu0: cpu@0 {
 			operating-points-v2 = <&cpu_opp_table>;
 			reg = <0x0>;
 			cpu-idle-states = <&CPU_SLEEP_0>;
+			next-level-cache = <&L2>;
 		};
 
 		cpu1: cpu@1 {
@@ -42,6 +43,7 @@ cpu1: cpu@1 {
 			reg = <0x1>;
 			operating-points-v2 = <&cpu_opp_table>;
 			cpu-idle-states = <&CPU_SLEEP_0>;
+			next-level-cache = <&L2>;
 		};
 
 		cpu2: cpu@2 {
@@ -51,6 +53,7 @@ cpu2: cpu@2 {
 			reg = <0x2>;
 			operating-points-v2 = <&cpu_opp_table>;
 			cpu-idle-states = <&CPU_SLEEP_0>;
+			next-level-cache = <&L2>;
 		};
 
 		cpu3: cpu@3 {
@@ -60,6 +63,13 @@ cpu3: cpu@3 {
 			reg = <0x3>;
 			operating-points-v2 = <&cpu_opp_table>;
 			cpu-idle-states = <&CPU_SLEEP_0>;
+			next-level-cache = <&L2>;
+		};
+
+		L2: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
 		};
 
 		idle-states {
Signature · 1 line
2.36.1

Michal Simek

author maintainer
#0 lore raw

v3 cover arm64: zynqmp: Misc zynqmp changes

Hi,

the series is syncing the latest dt changes based on board status and the latest DT schema.
The patches are based on
https://lore.kernel.org/all/[email protected]/

I have applied patches which were reviewed already to have smaller series. Patches can be found https://github.com/Xilinx/linux-xlnx/tree/zynqmp/dt
or they are in Linux-next already.

v1 is at
https://lore.kernel.org/r/[email protected].

v2 is at
https://lore.kernel.org/r/[email protected]

Thanks,
Michal

Changes in v3:
- Add missing cache-unified

Changes in v2:
- Update commit message to remove Linux part - reported by Laurent

Radhey Shyam Pandey (1):
arm64: zynqmp: Add L2 cache nodes

 arch/arm64/boot/dts/xilinx/zynqmp.dtsi | 10 ++++++++++
 1 file changed, 10 insertions(+)
Signature · 1 line
2.36.1
author maintainer Applied
#2 lore raw
Quoted 23 lines · Michal Simek

Hi,

the series is syncing the latest dt changes based on board status and the latest DT schema.
The patches are based on
https://lore.kernel.org/all/[email protected]/

I have applied patches which were reviewed already to have smaller series. Patches can be found https://github.com/Xilinx/linux-xlnx/tree/zynqmp/dt
or they are in Linux-next already.

v1 is at
https://lore.kernel.org/r/[email protected].

v2 is at
https://lore.kernel.org/r/[email protected]

Thanks,
Michal

Changes in v3:
- Add missing cache-unified

Quoted 9 lines

Changes in v2:
- Update commit message to remove Linux part - reported by Laurent

Radhey Shyam Pandey (1):
arm64: zynqmp: Add L2 cache nodes

  arch/arm64/boot/dts/xilinx/zynqmp.dtsi | 10 ++++++++++
  1 file changed, 10 insertions(+)

Applied.
M

_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel