Skip to contentSkip to conversation

Enable IPQ5332 USB2

PATCH Applied Varadarajan Narayanan 3 participants 8 messages Aug 14, 2023 – Aug 17, 2023

Subsystems (4)

v8 of 12 Applied Latest is v12 →

lore
Share & tools
lore
#0 lore raw

v8 cover Enable IPQ5332 USB2

This patch series adds the relevant phy and controller configurations for enabling USB2 on IPQ5332

v8:
Driver:-
Change commit subject and message per review comments
Don't include of_platform.h
Change struct initialization coding style
GENMASK -> BIT for one of the defines
v7:
Binding:-
Move 'compatible' to be the first entry
In the example have 'usb-phy' instead of 'usb2-phy'
Add 'Reviewed-by: Krzysztof Kozlowski'
v6:
Binding and dts:-
Dropped the qcom,dwc3.yaml patch as it has been picked up for linux-next Add const to compatible, vdd-supply
Move nodes per register address
Driver:-
Add vdd-supply
Cleanup error paths in probe with dev_err_probe
v5:
Binding and dts:-
Fix email id
Removed 'Reviewed-by: Krzysztof Kozlowski <[email protected]>' as had to change bindings file to be able to use generic phy instead of usb-phy

Driver:-
Remove unused definition Use generic phy instead of usb-phy
v4:
Binding and dts:-
Change node name (bindings & dts)
Driver:-
Remove unused enum
static const for '.data' Error handling for devm_clk_get
v3:
Fix bindings file based on review comments

v1:
Cleanup DTS
Combine driver, kconfig and makefile patches Remove unused functions from M31 driver Drop the clock driver changes

Varadarajan Narayanan (5):
dt-bindings: phy: qcom,m31: Document qcom,m31 USB phy
phy: qcom: Introduce M31 USB PHY driver
arm64: dts: qcom: ipq5332: Add USB related nodes
arm64: dts: qcom: ipq5332: Enable USB
arm64: defconfig: Enable M31 USB phy driver

 .../bindings/phy/qcom,ipq5332-usb-hsphy.yaml       |  59 +++++
 arch/arm64/boot/dts/qcom/ipq5332-rdp468.dts        |  23 ++
 arch/arm64/boot/dts/qcom/ipq5332.dtsi              |  55 ++++
 arch/arm64/configs/defconfig                       |   1 +
 drivers/phy/qualcomm/Kconfig                       |  11 +
 drivers/phy/qualcomm/Makefile                      |   1 +
 drivers/phy/qualcomm/phy-qcom-m31.c                | 294 +++++++++++++++++++++
 7 files changed, 444 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/phy/qcom,ipq5332-usb-hsphy.yaml
 create mode 100644 drivers/phy/qualcomm/phy-qcom-m31.c
Signature · 7 lines
2.7.4


-- 
linux-phy mailing list
[email protected]
https://lists.infradead.org/mailman/listinfo/linux-phy
#1 lore raw

PATCH v8 1/5 dt-bindings: phy: qcom,m31: Document qcom,m31 USB phy

Document the M31 USB2 phy present in IPQ5332.

---
v7:
Move 'compatible' to be the first entry
In the example have 'usb-phy' instead of 'usb2-phy'
Add 'Reviewed-by: Krzysztof Kozlowski'
'make dt_binding_check DT_SCHEMA_FILES=qcom,ipq5332-usb-hsphy.yaml' passed 'make CHECK_DTBS=y DT_SCHEMA_FILES=qcom,ipq5332-usb-hsphy.yaml dtbs_check' passed
v6:
Add 'Co-developed-by: Sricharan'
Add 'const' to compatible, vdd-supply
Remove label and use usb2-phy for nodename in the example
v5:
Add '#phy-cells', to be able to use generic phy
Remove 'Reviewed-by: Krzysztof Kozlowski' due to above change
v4:
Move M31 URL to description
Remove maxItems and relevant content from clock-names
Change node name to generic name
'make dt_binding_check DT_SCHEMA_FILES=qcom' passed
v3:
Incorporate review comments. Will bring in ipq5018 compatible string while posting ipq5018 usb patchset.

v1:
Rename qcom,m31.yaml -> qcom,ipq5332-usb-hsphy.yaml Drop default binding "m31,usb-hsphy"
Add clock
Remove 'oneOf' from compatible
Remove 'qscratch' region from register space as it is not needed Remove reset-names
Fix the example definition

---
 .../bindings/phy/qcom,ipq5332-usb-hsphy.yaml       | 59 ++++++++++++++++++++++
 1 file changed, 59 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/phy/qcom,ipq5332-usb-hsphy.yaml
Documentation/devicetree/bindings/phy/qcom,ipq5332-usb-hsphy.yaml new file +59 -0
new file mode 100644
index 0000000..2671a04
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/qcom,ipq5332-usb-hsphy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: M31 USB PHY
+
+maintainers:
+  - Sricharan Ramabadhran <[email protected]>
+  - Varadarajan Narayanan <[email protected]>
+
+description:
+  USB M31 PHY (https://www.m31tech.com) found in Qualcomm
+  IPQ5018, IPQ5332 SoCs.
+
+properties:
+  compatible:
+    items:
+      - const: qcom,ipq5332-usb-hsphy
+
+  "#phy-cells":
+    const: 0
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: cfg_ahb
+
+  resets:
+    maxItems: 1
+
+  vdd-supply:
+    description:
+      Phandle to 5V regulator supply to PHY digital circuit.
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,ipq5332-gcc.h>
+    usb-phy@7b000 {
+        compatible = "qcom,ipq5332-usb-hsphy";
+        reg = <0x0007b000 0x12c>;
+
+        clocks = <&gcc GCC_USB0_PHY_CFG_AHB_CLK>;
+        clock-names = "cfg_ahb";
+
+        #phy-cells = <0>;
+
+        resets = <&gcc GCC_QUSB2_0_PHY_BCR>;
+
+        vdd-supply = <&regulator_fixed_5p0>;
+    };
Signature · 7 lines
2.7.4


-- 
linux-phy mailing list
[email protected]
https://lists.infradead.org/mailman/listinfo/linux-phy
#2 lore raw

PATCH v8 2/5 phy: qcom: Introduce M31 USB PHY driver

In reply to Varadarajan Narayanan

Add the M31 USB2 phy driver for the USB M31 PHY
(https://www.m31tech.com) found in Qualcomm IPQ5018, IPQ5332 SoCs.

---
v8:
Change commit subject and message per review comments Don't include of_platform.h
Change struct init coding style
GENMASK -> BIT for one define
v6:
Kconfig:Add COMPILE_TEST and remove USB_GADGET from 'depends'
Change 'selects' USB_PHY -> GENERIC_PHY
Driver: Use correct headers
const int -> unsigned int for 'nregs' in private data Use generic names for clk, phy in m31 phy structure Init register details directly instead of using macro Use dev_err_probe in the error paths of driver probe
v5:
Kconfig and Makefile:- place snippet according to sorted order Use generic phy instead of usb-phy
Use ARRAY_SIZE for reg init instead of blank last entry Fix copyright year

v4:
Remove unused enum
Error handling for devm_clk_get
v1:
Combine driver, makefile and kconfig into 1 patch
Remove 'qscratch' region and its usage. The controller driver takes care of those settings
Use compatible/data to handle ipq5332 init
Drop the default case
Get resources by index instead of name as there is only one resource Add clock
Fix review comments in the driver

---
 drivers/phy/qualcomm/Kconfig        |  11 ++
 drivers/phy/qualcomm/Makefile       |   1 +
 drivers/phy/qualcomm/phy-qcom-m31.c | 294 ++++++++++++++++++++++++++++++++++++
 3 files changed, 306 insertions(+)
 create mode 100644 drivers/phy/qualcomm/phy-qcom-m31.c
drivers/phy/qualcomm/Kconfig +11 -0
index ced6038..d891058 100644
@@ -143,6 +143,17 @@ config PHY_QCOM_EUSB2_REPEATER
 	  PMICs. The repeater is paired with a Synopsys eUSB2 Phy
 	  on Qualcomm SOCs.
 
+config PHY_QCOM_M31_USB
+	tristate "Qualcomm M31 HS PHY driver support"
+	depends on USB && (ARCH_QCOM || COMPILE_TEST)
+	select GENERIC_PHY
+	help
+	  Enable this to support M31 HS PHY transceivers on Qualcomm chips
+	  with DWC3 USB core. It handles PHY initialization, clock
+	  management required after resetting the hardware and power
+	  management. This driver is required even for peripheral only or
+	  host only mode configurations.
+
 config PHY_QCOM_USB_HS
 	tristate "Qualcomm USB HS PHY module"
 	depends on USB_ULPI_BUS
drivers/phy/qualcomm/Makefile +1 -0
index df94581..ffd609a 100644
@@ -4,6 +4,7 @@ obj-$(CONFIG_PHY_QCOM_APQ8064_SATA)	+= phy-qcom-apq8064-sata.o
 obj-$(CONFIG_PHY_QCOM_EDP)		+= phy-qcom-edp.o
 obj-$(CONFIG_PHY_QCOM_IPQ4019_USB)	+= phy-qcom-ipq4019-usb.o
 obj-$(CONFIG_PHY_QCOM_IPQ806X_SATA)	+= phy-qcom-ipq806x-sata.o
+obj-$(CONFIG_PHY_QCOM_M31_USB)		+= phy-qcom-m31.o
 obj-$(CONFIG_PHY_QCOM_PCIE2)		+= phy-qcom-pcie2.o
 
 obj-$(CONFIG_PHY_QCOM_QMP_COMBO)	+= phy-qcom-qmp-combo.o
drivers/phy/qualcomm/phy-qcom-m31.c new file +294 -0

294 lines not on this page · raw message

Signature · 7 lines
2.7.4


-- 
linux-phy mailing list
[email protected]
https://lists.infradead.org/mailman/listinfo/linux-phy
#4 lore raw

PATCH v8 3/5 arm64: dts: qcom: ipq5332: Add USB related nodes

In reply to Varadarajan Narayanan

Add USB phy and controller nodes.

---
v6:
Remove clock names
Move the nodes to address sorted location
v5:
Use generic phy instead of usb-phy
'make CHECK_DTBS=y DT_SCHEMA_FILES=qcom dtbs_check' passed 'DT_CHECKER_FLAGS='-v -m' DT_SCHEMA_FILES=qcom dt_binding_check' passed
v4:
Change node name
Remove blank line
'make CHECK_DTBS=y DT_SCHEMA_FILES=qcom qcom/ipq5332-rdp441.dtb' passed
v1:
Rename phy node
Change compatible from m31,ipq5332-usb-hsphy -> qcom,ipq5332-usb-hsphy Remove 'qscratch' from phy node
Fix alignment and upper-case hex no.s
Add clock definition for the phy
Remove snps,ref-clock-period-ns as it is not used. dwc3_ref_clk_period() in dwc3/core.c takes the frequency from ref clock and calculates fladj as appropriate.

---
 arch/arm64/boot/dts/qcom/ipq5332.dtsi | 55 +++++++++++++++++++++++++++++++++++
 1 file changed, 55 insertions(+)
arch/arm64/boot/dts/qcom/ipq5332.dtsi +55 -0
index 8bfc2db..c45d9d4 100644
@@ -145,6 +145,19 @@
 		#size-cells = <1>;
 		ranges = <0 0 0 0xffffffff>;
 
+		usbphy0: phy@7b000 {
+			compatible = "qcom,ipq5332-usb-hsphy";
+			reg = <0x0007b000 0x12c>;
+
+			clocks = <&gcc GCC_USB0_PHY_CFG_AHB_CLK>;
+
+			resets = <&gcc GCC_QUSB2_0_PHY_BCR>;
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
 		qfprom: efuse@a4000 {
 			compatible = "qcom,ipq5332-qfprom", "qcom,qfprom";
 			reg = <0x000a4000 0x721>;
@@ -290,6 +303,48 @@
 			status = "disabled";
 		};
 
+		usb: usb2@8a00000 {
+			compatible = "qcom,ipq5332-dwc3", "qcom,dwc3";
+			reg = <0x08af8800 0x400>;
+
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hs_phy_irq";
+
+			clocks = <&gcc GCC_USB0_MASTER_CLK>,
+				 <&gcc GCC_SNOC_USB_CLK>,
+				 <&gcc GCC_USB0_SLEEP_CLK>,
+				 <&gcc GCC_USB0_MOCK_UTMI_CLK>;
+			clock-names = "core",
+				      "iface",
+				      "sleep",
+				      "mock_utmi";
+
+			resets = <&gcc GCC_USB_BCR>;
+
+			qcom,select-utmi-as-pipe-clk;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			status = "disabled";
+
+			usb2_0_dwc: usb@8a00000 {
+				compatible = "snps,dwc3";
+				reg = <0x08a00000 0xe000>;
+				clocks = <&gcc GCC_USB0_MOCK_UTMI_CLK>;
+				clock-names = "ref";
+				interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+				phy-names = "usb2-phy";
+				phys = <&usbphy0>;
+				tx-fifo-resize;
+				snps,is-utmi-l1-suspend;
+				snps,hird-threshold = /bits/ 8 <0x0>;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_u3_susphy_quirk;
+			};
+		};
+
 		intc: interrupt-controller@b000000 {
 			compatible = "qcom,msm-qgic2";
 			reg = <0x0b000000 0x1000>,	/* GICD */
Signature · 7 lines
2.7.4


-- 
linux-phy mailing list
[email protected]
https://lists.infradead.org/mailman/listinfo/linux-phy
#5 lore raw

PATCH v8 4/5 arm64: dts: qcom: ipq5332: Enable USB

In reply to Varadarajan Narayanan

Enable USB2 in host mode.

---
v6:
Add vdd-supply and corresponding regulator
v1:
Enable usb-phy node

---
 arch/arm64/boot/dts/qcom/ipq5332-rdp468.dts | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)
arch/arm64/boot/dts/qcom/ipq5332-rdp468.dts +23 -0
index f96b0c8..b4099a2f 100644
@@ -12,6 +12,15 @@
 / {
 	model = "Qualcomm Technologies, Inc. IPQ5332 MI01.6";
 	compatible = "qcom,ipq5332-ap-mi01.6", "qcom,ipq5332";
+
+	regulator_fixed_5p0: s0500 {
+		compatible = "regulator-fixed";
+		regulator-min-microvolt = <500000>;
+		regulator-max-microvolt = <500000>;
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-name = "fixed_5p0";
+	};
 };
 
 &blsp1_spi0 {
@@ -79,3 +88,17 @@
 		bias-pull-up;
 	};
 };
+
+&usbphy0 {
+	vdd-supply = <&regulator_fixed_5p0>;
+
+	status = "okay";
+};
+
+&usb {
+	status = "okay";
+};
+
+&usb2_0_dwc {
+	dr_mode = "host";
+};
Signature · 7 lines
2.7.4


-- 
linux-phy mailing list
[email protected]
https://lists.infradead.org/mailman/listinfo/linux-phy
#6 lore raw

PATCH v8 5/5 arm64: defconfig: Enable M31 USB phy driver

In reply to Varadarajan Narayanan

Enable M31 USB phy driver present in IPQ5332.

---
v2:
Add full stop to commit log.

---
 arch/arm64/configs/defconfig | 1 +
 1 file changed, 1 insertion(+)
arch/arm64/configs/defconfig +1 -0
index bf13d5c..04daaac 100644
@@ -1416,6 +1416,7 @@ CONFIG_PHY_QCOM_USB_SNPS_FEMTO_V2=m
 CONFIG_PHY_QCOM_USB_HS_28NM=m
 CONFIG_PHY_QCOM_USB_SS=m
 CONFIG_PHY_QCOM_SGMII_ETH=m
+CONFIG_PHY_QCOM_M31_USB=m
 CONFIG_PHY_R8A779F0_ETHERNET_SERDES=y
 CONFIG_PHY_RCAR_GEN3_PCIE=y
 CONFIG_PHY_RCAR_GEN3_USB2=y
Signature · 7 lines
2.7.4


-- 
linux-phy mailing list
[email protected]
https://lists.infradead.org/mailman/listinfo/linux-phy
maintainer Reviewed-by on v8 2/5
#3 lore raw

Re: [PATCH v8 2/5] phy: qcom: Introduce M31 USB PHY driver

In reply to Varadarajan Narayanan
Quoted 4 lines · Varadarajan Narayanan

Add the M31 USB2 phy driver for the USB M31 PHY
(https://www.m31tech.com) found in Qualcomm IPQ5018, IPQ5332 SoCs.

Thanks, this looks good to me now.

Regards,
Bjorn

Signature · 3 lines
linux-phy mailing list
[email protected]
https://lists.infradead.org/mailman/listinfo/linux-phy
maintainer Applied
#7 lore raw

Re: (subset) [PATCH v8 0/5] Enable IPQ5332 USB2

In reply to Varadarajan Narayanan
Quoted 29 lines · Varadarajan Narayanan

This patch series adds the relevant phy and controller configurations for enabling USB2 on IPQ5332

v8:
Driver:-
Change commit subject and message per review comments
Don't include of_platform.h
Change struct initialization coding style
GENMASK -> BIT for one of the defines
v7:
Binding:-
Move 'compatible' to be the first entry
In the example have 'usb-phy' instead of 'usb2-phy'
Add 'Reviewed-by: Krzysztof Kozlowski'
v6:
Binding and dts:-
Dropped the qcom,dwc3.yaml patch as it has been picked up for linux-next Add const to compatible, vdd-supply
Move nodes per register address
Driver:-
Add vdd-supply
Cleanup error paths in probe with dev_err_probe
v5:
Binding and dts:-
Fix email id
Removed 'Reviewed-by: Krzysztof Kozlowski <[email protected]>' as had to change bindings file to be able to use generic phy instead of usb-phy

Quoted 1 line

[...]

Applied, thanks!

[1/5] dt-bindings: phy: qcom,m31: Document qcom,m31 USB phy

      commit: b11f8acb937ed64841eeba22b0f0371ded58bef2
[2/5] phy: qcom: Introduce M31 USB PHY driver
      commit: 9bc2b3b35334aa2742ad3dc4219c001279a97998

Best regards,

Signature · 8 lines
~Vinod



-- 
linux-phy mailing list
[email protected]
https://lists.infradead.org/mailman/listinfo/linux-phy