dump for userspace pm
Subsystems (4)
v2 cover dump for userspace pm
v2:
Address Mat's comments in v1:
- patch 2: pass token to dump_addr too.
- patch 2: add back id in mptcp_userspace_pm_dump_addr().
- patch 5: pdate mptcp.yaml
v1:
Address Mat's comments in "userspace pm enhancements" v14.
Geliang Tang (15):
mptcp: add mptcp_pm_nl_put_entry_msg helper
mptcp: implement mptcp_userspace_pm_dump_addr
mptcp: dump addrs in userspace pm list
mptcp: check userspace pm subflow flag
mptcp: add token for get-addr in yaml
selftests: mptcp: add userspace pm subflow flag
selftests: mptcp: add token for dump_addr
selftests: mptcp: add check_output helper
selftests: mptcp: dump userspace addrs list
mptcp: add userspace_pm_lookup_addr_by_id helper
mptcp: add mptcp_pm_nl_put_entry_info helper
mptcp: implement mptcp_userspace_pm_get_addr
mptcp: get addr in userspace pm list
selftests: mptcp: add token for get_addr
selftests: mptcp: userspace pm get addr tests
Documentation/netlink/specs/mptcp.yaml | 5 +- net/mptcp/mptcp_pm_gen.c | 7 +- net/mptcp/mptcp_pm_gen.h | 2 +- net/mptcp/pm_netlink.c | 95 +++++++++++----- net/mptcp/pm_userspace.c | 103 +++++++++++++++--- net/mptcp/protocol.h | 9 ++ .../testing/selftests/net/mptcp/mptcp_join.sh | 99 +++++++++++++++++ tools/testing/selftests/net/mptcp/pm_nl_ctl.c | 39 ++++++- 8 files changed, 306 insertions(+), 53 deletions(-)
Signature · 1 line
2.35.3
PATCH v2 1/15 mptcp: add mptcp_pm_nl_put_entry_msg helper
Extract the genlmsg related code from mptcp_pm_nl_get_addr_dumpit() into a new helper mptcp_pm_nl_put_entry_msg(). It will be used in the userspace PM dump_addr().
--- net/mptcp/pm_netlink.c | 35 ++++++++++++++++++++++++----------- net/mptcp/protocol.h | 3 +++ 2 files changed, 27 insertions(+), 11 deletions(-)
net/mptcp/pm_netlink.c +24 -11
@@ -1658,6 +1658,29 @@ static int mptcp_nl_fill_addr(struct sk_buff *skb,return -EMSGSIZE ; } +int mptcp_pm_nl_put_entry_msg (struct sk_buff *msg, +struct netlink_callback *cb, +struct mptcp_pm_addr_entry *entry) +{ +void *hdr; +int ret; + + hdr =genlmsg_put (msg,NETLINK_CB (cb->skb).portid, + cb->nlh->nlmsg_seq, &mptcp_genl_family, +NLM_F_MULTI ,MPTCP_PM_CMD_GET_ADDR ); +if (!hdr) +return -EMSGSIZE ; + + ret =mptcp_nl_fill_addr (msg, entry); +if (ret <0 ) { +genlmsg_cancel (msg, hdr); +return ret; + } + +genlmsg_end (msg, hdr); +return 0 ; +} +int mptcp_pm_nl_get_addr_doit (struct sk_buff *skb,struct genl_info *info) {struct nlattr *attr = info->attrs[MPTCP_PM_ENDPOINT_ADDR ];
@@ -1715,7 +1738,6 @@ int mptcp_pm_nl_get_addr_dumpit(struct sk_buff *msg,struct mptcp_pm_addr_entry *entry;struct pm_nl_pernet *pernet;int id = cb->args[0 ]; -void *hdr;int i; pernet =pm_nl_get_pernet (net);
@@ -1730,19 +1752,10 @@ int mptcp_pm_nl_get_addr_dumpit(struct sk_buff *msg,if (entry->addr.id <= id)continue ; - hdr =genlmsg_put (msg,NETLINK_CB (cb->skb).portid, - cb->nlh->nlmsg_seq, &mptcp_genl_family, -NLM_F_MULTI ,MPTCP_PM_CMD_GET_ADDR ); -if (!hdr) -break ; - -if (mptcp_nl_fill_addr (msg, entry) <0 ) { -genlmsg_cancel (msg, hdr); +if (mptcp_pm_nl_put_entry_msg (msg, cb, entry))break ; - } id = entry->addr.id; -genlmsg_end (msg, hdr); } }spin_unlock_bh (&pernet->lock);
net/mptcp/protocol.h +3 -0
@@ -1022,6 +1022,9 @@ bool mptcp_pm_add_addr_signal(struct mptcp_sock *msk, const struct sk_buff *skb, bool *drop_other_suboptions);bool mptcp_pm_rm_addr_signal (struct mptcp_sock *msk,unsigned int remaining,struct mptcp_rm_list *rm_list); +int mptcp_pm_nl_put_entry_msg (struct sk_buff *msg, +struct netlink_callback *cb, +struct mptcp_pm_addr_entry *entry);int mptcp_pm_get_local_id (struct mptcp_sock *msk,struct sock_common *skc);int mptcp_pm_nl_get_local_id (struct mptcp_sock *msk,struct mptcp_addr_info *skc);int mptcp_userspace_pm_get_local_id (struct mptcp_sock *msk,struct mptcp_addr_info *skc);
Signature · 1 line
2.35.3
PATCH v2 2/15 mptcp: implement mptcp_userspace_pm_dump_addr
In reply to Geliang TangThis patch implements mptcp_userspace_pm_dump_addr() to dump addresses from userspace pm address list. Use mptcp_token_get_sock() to get the msk from the given token, if userspace PM is enabled in it, traverse each address entry in address list, put every entry to userspace using mptcp_pm_nl_put_entry_msg().
--- net/mptcp/pm_userspace.c | 39 +++++++++++++++++++++++++++++++++++++++ net/mptcp/protocol.h | 2 ++ 2 files changed, 41 insertions(+)
net/mptcp/pm_userspace.c +39 -0
@@ -550,3 +550,42 @@ int mptcp_userspace_pm_set_flags(struct net *net, struct nlattr *token,sock_put (sk);return ret; } + +int mptcp_userspace_pm_dump_addr (struct sk_buff *msg, +struct netlink_callback *cb) +{ +const struct genl_info *info =genl_info_dump (cb); +struct net *net =sock_net (msg->sk); +struct mptcp_pm_addr_entry *entry; +struct mptcp_sock *msk; +int id = cb->args[0 ]; +int ret = -EINVAL ; + +if (!info->attrs[MPTCP_PM_ATTR_TOKEN ]) +return ret; + + msk =mptcp_token_get_sock (net,nla_get_u32 (info->attrs[MPTCP_PM_ATTR_TOKEN ])); +if (!msk) +return ret; + +if (mptcp_pm_is_userspace (msk)) { +struct sock *sk = (struct sock *)msk; + +lock_sock (sk); +spin_lock_bh (&msk->pm.lock); +list_for_each_entry (entry, &msk->pm.userspace_pm_local_addr_list, list) { +if (entry->addr.id <= id) +continue ; + +if (mptcp_pm_nl_put_entry_msg (msg, cb, entry)) +break ; + + id = entry->addr.id; + } +spin_unlock_bh (&msk->pm.lock); +release_sock (sk); + } + + cb->args[0 ] = id; +return msg->len; +}
net/mptcp/protocol.h +2 -0
@@ -1028,6 +1028,8 @@ int mptcp_pm_nl_put_entry_msg(struct sk_buff *msg,int mptcp_pm_get_local_id (struct mptcp_sock *msk,struct sock_common *skc);int mptcp_pm_nl_get_local_id (struct mptcp_sock *msk,struct mptcp_addr_info *skc);int mptcp_userspace_pm_get_local_id (struct mptcp_sock *msk,struct mptcp_addr_info *skc); +int mptcp_userspace_pm_dump_addr (struct sk_buff *msg, +struct netlink_callback *cb);void __init mptcp_pm_nl_init (void );void mptcp_pm_nl_work (struct mptcp_sock *msk);
Signature · 1 line
2.35.3
PATCH v2 3/15 mptcp: dump addrs in userspace pm list
In reply to Geliang TangThis patch renames mptcp_pm_nl_get_addr_dumpit() to in-kernel netlink PM dump addrs function mptcp_pm_nl_dump_addr(), then invoke both in-kernel PM mptcp_pm_nl_dump_addr() and userspace PM mptcp_userspace_pm_dump_addr() dump addrs functions in mptcp_pm_nl_get_addr_dumpit().
--- net/mptcp/pm_netlink.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-)
net/mptcp/pm_netlink.c +9 -2
@@ -1731,8 +1731,8 @@ int mptcp_pm_nl_get_addr_doit(struct sk_buff *skb, struct genl_info *info)return ret; } -int mptcp_pm_nl_get_addr_dumpit (struct sk_buff *msg, -struct netlink_callback *cb) +static int mptcp_pm_nl_dump_addr (struct sk_buff *msg, +struct netlink_callback *cb) {struct net *net =sock_net (msg->sk);struct mptcp_pm_addr_entry *entry;
@@ -1764,6 +1764,13 @@ int mptcp_pm_nl_get_addr_dumpit(struct sk_buff *msg,return msg->len; } +int mptcp_pm_nl_get_addr_dumpit (struct sk_buff *msg, +struct netlink_callback *cb) +{ +return mptcp_pm_nl_dump_addr (msg, cb) + +mptcp_userspace_pm_dump_addr (msg, cb); +} +static int parse_limit (struct genl_info *info,int id,unsigned int *limit) {struct nlattr *attr = info->attrs[id];
Signature · 1 line
2.35.3
PATCH v2 4/15 mptcp: check userspace pm subflow flag
In reply to Geliang TangThis patch uses mptcp_pm_parse_entry() instead of mptcp_pm_parse_addr() to get the flags of the entry. Add MPTCP_PM_ADDR_FLAG_SUBFLOW flag check in mptcp_pm_nl_subflow_create_doit().
--- net/mptcp/pm_userspace.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-)
net/mptcp/pm_userspace.c +8 -2
@@ -348,12 +348,19 @@ int mptcp_pm_nl_subflow_create_doit(struct sk_buff *skb, struct genl_info *info) goto create_err; } - err =mptcp_pm_parse_addr (laddr, info, &addr_l); + err =mptcp_pm_parse_entry (laddr, info, true, &local);if (err <0 ) {NL_SET_ERR_MSG_ATTR (info->extack, laddr,"error parsing local addr" ); goto create_err; } +if (!(local.flags &MPTCP_PM_ADDR_FLAG_SUBFLOW )) { +GENL_SET_ERR_MSG (info,"invalid addr flags" ); + err = -EINVAL ; + goto create_err; + } + addr_l = local.addr; + err =mptcp_pm_parse_addr (raddr, info, &addr_r);if (err <0 ) {NL_SET_ERR_MSG_ATTR (info->extack, raddr,"error parsing remote addr" );
@@ -366,7 +373,6 @@ int mptcp_pm_nl_subflow_create_doit(struct sk_buff *skb, struct genl_info *info) goto create_err; } - local.addr = addr_l; err =mptcp_userspace_pm_append_new_local_addr (msk, &local);if (err <0 ) {GENL_SET_ERR_MSG (info,"did not match address and id" );
Signature · 1 line
2.35.3
PATCH v2 5/15 mptcp: add token for get-addr in yaml
In reply to Geliang TangThis patch adds token paramenter together with addr in get-addr section in mptcp.yaml, then use the following commands to update mptcp_pm_gen.c and mptcp_pm_gen.h:
./tools/net/ynl/ynl-gen-c.py --mode kernel \
--spec Documentation/netlink/specs/mptcp.yaml --source \
-o net/mptcp/mptcp_pm_gen.c
./tools/net/ynl/ynl-gen-c.py --mode kernel \
--spec Documentation/netlink/specs/mptcp.yaml --header \
-o net/mptcp/mptcp_pm_gen.h--- Documentation/netlink/specs/mptcp.yaml | 5 ++++- net/mptcp/mptcp_pm_gen.c | 7 ++++--- net/mptcp/mptcp_pm_gen.h | 2 +- 3 files changed, 9 insertions(+), 5 deletions(-)
Documentation/netlink/specs/mptcp.yaml +4 -1
@@ -292,20 +292,23 @@ operations: - name: get-addr doc: Get endpoint information - attribute-set: endpoint + attribute-set: attr dont-validate: [ strict ] flags: [ uns-admin-perm ] do: &get-addr-attrs request: attributes: - addr + - token reply: attributes: - addr + - token dump: reply: attributes: - addr + - token - name: flush-addrs doc: flush addresses
net/mptcp/mptcp_pm_gen.c +4 -3
@@ -32,8 +32,9 @@ const struct nla_policy mptcp_pm_del_addr_nl_policy[MPTCP_PM_ENDPOINT_ADDR + 1] };/* MPTCP_PM_CMD_GET_ADDR - do */ -const struct nla_policy mptcp_pm_get_addr_nl_policy[MPTCP_PM_ENDPOINT_ADDR +1 ] = { - [MPTCP_PM_ENDPOINT_ADDR ] =NLA_POLICY_NESTED (mptcp_pm_address_nl_policy), +const struct nla_policy mptcp_pm_get_addr_nl_policy[MPTCP_PM_ATTR_TOKEN +1 ] = { + [MPTCP_PM_ATTR_ADDR ] =NLA_POLICY_NESTED (mptcp_pm_address_nl_policy), + [MPTCP_PM_ATTR_TOKEN ] = { .type =NLA_U32 , }, };/* MPTCP_PM_CMD_FLUSH_ADDRS - do */
@@ -110,7 +111,7 @@ const struct genl_ops mptcp_pm_nl_ops[11] = { .doit = mptcp_pm_nl_get_addr_doit, .dumpit = mptcp_pm_nl_get_addr_dumpit, .policy = mptcp_pm_get_addr_nl_policy, - .maxattr = MPTCP_PM_ENDPOINT_ADDR, + .maxattr = MPTCP_PM_ATTR_TOKEN, .flags = GENL_UNS_ADMIN_PERM, }, {
net/mptcp/mptcp_pm_gen.h +1 -1
@@ -18,7 +18,7 @@ extern const struct nla_policy mptcp_pm_add_addr_nl_policy[MPTCP_PM_ENDPOINT_ADDextern const struct nla_policy mptcp_pm_del_addr_nl_policy[MPTCP_PM_ENDPOINT_ADDR +1 ]; -extern const struct nla_policy mptcp_pm_get_addr_nl_policy[MPTCP_PM_ENDPOINT_ADDR +1 ]; +extern const struct nla_policy mptcp_pm_get_addr_nl_policy[MPTCP_PM_ATTR_TOKEN +1 ];extern const struct nla_policy mptcp_pm_flush_addrs_nl_policy[MPTCP_PM_ENDPOINT_ADDR +1 ];
Signature · 1 line
2.35.3
PATCH v2 6/15 selftests: mptcp: add userspace pm subflow flag
In reply to Geliang TangThis patch adds the address flag MPTCP_PM_ADDR_FLAG_SUBFLOW in csf() in pm_nl_ctl.c when subflow is created by a userspace PM.
--- tools/testing/selftests/net/mptcp/pm_nl_ctl.c | 8 ++++++++ 1 file changed, 8 insertions(+)
tools/testing/selftests/net/mptcp/pm_nl_ctl.c +8 -0
@@ -453,6 +453,7 @@ int csf(int fd, int pm_family, int argc, char *argv[])char data[NLMSG_ALIGN (sizeof (struct nlmsghdr )) +NLMSG_ALIGN (sizeof (struct genlmsghdr )) +1024 ]; +u_int32_t flags =MPTCP_PM_ADDR_FLAG_SUBFLOW ;const char *params[5 ];struct nlmsghdr *nh;struct rtattr *addr;
@@ -558,6 +559,13 @@ int csf(int fd, int pm_family, int argc, char *argv[]) off +=NLMSG_ALIGN (rta->rta_len); } +/* addr flags */ + rta = (void *)(data + off); + rta->rta_type =MPTCP_PM_ADDR_ATTR_FLAGS ; + rta->rta_len =RTA_LENGTH (4 ); +memcpy (RTA_DATA (rta), &flags,4 ); + off +=NLMSG_ALIGN (rta->rta_len); + addr->rta_len = off - addr_start; }
Signature · 1 line
2.35.3
PATCH v2 7/15 selftests: mptcp: add token for dump_addr
In reply to Geliang TangThe command dump_addr() of pm_nl_ctl can be used like this in in-kernel PM:
pm_nl_ctl dump
This patch adds token argument for it to support userspace PM:
pm_nl_ctl dump token $token
If 'token $token' is passed to dump_addr(), copy it into the kernel netlink.
--- tools/testing/selftests/net/mptcp/pm_nl_ctl.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+)
tools/testing/selftests/net/mptcp/pm_nl_ctl.c +17 -0
@@ -1127,8 +1127,16 @@ int dump_addrs(int fd, int pm_family, int argc, char *argv[]) 1024];pid_t pid =getpid ();struct nlmsghdr *nh; +u_int32_t token =0 ; +struct rtattr *rta;int off =0 ; +if (argc !=2 && argc !=4 ) +syntax (argv); + +if (argc ==4 && !strcmp (argv[2 ],"token" )) + token =strtoul (argv[3 ],NULL ,10 ); +memset (data,0 ,sizeof (data)); nh = (void *)data; off = init_genl_req(data, pm_family, MPTCP_PM_CMD_GET_ADDR,
@@ -1138,6 +1146,15 @@ int dump_addrs(int fd, int pm_family, int argc, char *argv[]) nh->nlmsg_pid = pid; nh->nlmsg_len = off; +/* token */ +if (token) { + rta = (void *)(data + off); + rta->rta_type =MPTCP_PM_ATTR_TOKEN ; + rta->rta_len =RTA_LENGTH (4 ); +memcpy (RTA_DATA (rta), &token,4 ); + off +=NLMSG_ALIGN (rta->rta_len); + } +print_addrs (nh, pm_family,do_nl_req (fd, nh, off,sizeof (data)));return 0 ; }
Signature · 1 line
2.35.3
PATCH v2 8/15 selftests: mptcp: add check_output helper
In reply to Geliang TangSimilar to check() in pm_netlink.sh, add a new helper check_output() in mptcp_join.sh to check the output of the given commands.
--- .../testing/selftests/net/mptcp/mptcp_join.sh | 27 +++++++++++++++++++ 1 file changed, 27 insertions(+)
tools/testing/selftests/net/mptcp/mptcp_join.sh +27 -0
@@ -21,6 +21,7 @@ cinfail="" cinsent="" tmpfile="" cout="" +check_output_err="" capout="" ns1="" ns2=""
@@ -186,6 +187,7 @@ init() { cout=$(mktemp) evts_ns1=$(mktemp) evts_ns2=$(mktemp) + check_output_err=$(mktemp) trap cleanup EXIT
@@ -199,6 +201,7 @@ cleanup() rm -f "$sin" "$sout" "$cinsent" "$cinfail" rm -f "$tmpfile" rm -rf $evts_ns1 $evts_ns2 + rm -f $check_output_err cleanup_partial }
@@ -3357,6 +3360,30 @@ userspace_pm_rm_sf() wait_rm_sf $1 "${cnt}" } +check_output() +{ + local cmd="$1" + local expected="$2" + local msg="$3" + local out=`$cmd 2>$check_output_err` + local cmd_ret=$? + + printf "%-42s" "$msg" + if [ $cmd_ret -ne 0 ]; then + mptcp_lib_print_err "[ FAIL ] command execution '$cmd' stderr " + cat $check_output_err + ret=${KSFT_FAIL} + return $cmd_ret + elif [ "$out" = "$expected" ]; then + mptcp_lib_print_ok "[ OK ]" + return 0 + else + mptcp_lib_print_err "[ FAIL ] expected '$expected' got '$out'" + ret=${KSFT_FAIL} + return 1 + fi +} + userspace_tests() { # userspace pm type prevents add_addr
Signature · 1 line
2.35.3
PATCH v2 9/15 selftests: mptcp: dump userspace addrs list
In reply to Geliang TangThis patch adds a new helper userspace_pm_dump() to dump addresses for the userspace PM. Add two new tests for userspace pm dump address and subflow. Use userspace_pm_add_addr() and userspace_pm_add_sf() to add an address and a suflow.
--- .../testing/selftests/net/mptcp/mptcp_join.sh | 56 +++++++++++++++++++ 1 file changed, 56 insertions(+)
tools/testing/selftests/net/mptcp/mptcp_join.sh +56 -0
@@ -3360,6 +3360,18 @@ userspace_pm_rm_sf() wait_rm_sf $1 "${cnt}" } +# $1: ns +userspace_pm_dump() +{ + local evts=$evts_ns1 + local tk + + [ "$1" == "$ns2" ] && evts=$evts_ns2 + tk=$(mptcp_lib_evts_get_info token "$evts") + + ip netns exec $1 ./pm_nl_ctl dump token $tk +} + check_output() { local cmd="$1"
@@ -3573,6 +3585,50 @@ userspace_tests() kill_events_pids wait $tests_pid fi + + # userspace pm dump address + if reset_with_events "userspace pm dump address" && + continue_if mptcp_lib_has_file '/proc/sys/net/mptcp/pm_type'; then + set_userspace_pm $ns1 + pm_nl_set_limits $ns2 1 1 + speed=5 \ + run_tests $ns1 $ns2 10.0.1.1 & + local tests_pid=$! + wait_mpj $ns1 + userspace_pm_add_addr $ns1 10.0.2.1 10 + chk_join_nr 1 1 1 + chk_add_nr 1 1 + chk_mptcp_info subflows 1 subflows 1 + chk_subflows_total 2 2 + chk_mptcp_info add_addr_signal 1 add_addr_accepted 1 + local dump="id 10 flags signal 10.0.2.1" + check_output "userspace_pm_dump $ns1" \ + "$dump" " dump addrs signal" + kill_events_pids + wait $tests_pid + fi + + # userspace pm dump subflow + if reset_with_events "userspace pm dump subflow" && + continue_if mptcp_lib_has_file '/proc/sys/net/mptcp/pm_type'; then + set_userspace_pm $ns2 + pm_nl_set_limits $ns1 0 1 + speed=5 \ + run_tests $ns1 $ns2 10.0.1.1 & + local tests_pid=$! + wait_mpj $ns2 + chk_mptcp_info subflows 0 subflows 0 + chk_subflows_total 1 1 + userspace_pm_add_sf $ns2 10.0.3.2 20 + chk_join_nr 1 1 1 + chk_mptcp_info subflows 1 subflows 1 + chk_subflows_total 2 2 + local dump="id 20 flags subflow 10.0.3.2" + check_output "userspace_pm_dump $ns2" \ + "$dump" " dump addrs subflow" + kill_events_pids + wait $tests_pid + fi } endpoint_tests()
Signature · 1 line
2.35.3
PATCH v2 10/15 mptcp: add userspace_pm_lookup_addr_by_id helper
In reply to Geliang TangCorresponding __lookup_addr_by_id() helper in the in-kernel netlink PM, this patch adds a new helper mptcp_userspace_pm_lookup_addr_by_id() to lookup the address entry with the given id on the userspace pm local address list.
--- net/mptcp/pm_userspace.c | 31 ++++++++++++++++--------------- 1 file changed, 16 insertions(+), 15 deletions(-)
net/mptcp/pm_userspace.c +16 -15
@@ -105,19 +105,26 @@ static int mptcp_userspace_pm_delete_local_addr(struct mptcp_sock *msk,return -EINVAL ; } +static struct mptcp_pm_addr_entry * +mptcp_userspace_pm_lookup_addr_by_id (struct mptcp_sock *msk,unsigned int id) +{ +struct mptcp_pm_addr_entry *entry; + +list_for_each_entry (entry, &msk->pm.userspace_pm_local_addr_list, list) { +if (entry->addr.id == id) +return entry; + } +return NULL ; +} +int mptcp_userspace_pm_get_flags_and_ifindex_by_id (struct mptcp_sock *msk,unsigned int id,u8 *flags,int *ifindex) { -struct mptcp_pm_addr_entry *entry, *match =NULL ; +struct mptcp_pm_addr_entry *match;spin_lock_bh (&msk->pm.lock); -list_for_each_entry (entry, &msk->pm.userspace_pm_local_addr_list, list) { -if (id == entry->addr.id) { - match = entry; -break ; - } - } + match =mptcp_userspace_pm_lookup_addr_by_id (msk, id);spin_unlock_bh (&msk->pm.lock);if (match) { *flags = match->flags;
@@ -249,7 +256,7 @@ int mptcp_pm_nl_remove_doit(struct sk_buff *skb, struct genl_info *info) {struct nlattr *token = info->attrs[MPTCP_PM_ATTR_TOKEN ];struct nlattr *id = info->attrs[MPTCP_PM_ATTR_LOC_ID ]; -struct mptcp_pm_addr_entry *match =NULL ; +struct mptcp_pm_addr_entry *match;struct mptcp_pm_addr_entry *entry;struct mptcp_sock *msk;LIST_HEAD (free_list);
@@ -286,13 +293,7 @@ int mptcp_pm_nl_remove_doit(struct sk_buff *skb, struct genl_info *info)lock_sock (sk); -list_for_each_entry (entry, &msk->pm.userspace_pm_local_addr_list, list) { -if (entry->addr.id == id_val) { - match = entry; -break ; - } - } - + match =mptcp_userspace_pm_lookup_addr_by_id (msk, id_val);if (!match) {GENL_SET_ERR_MSG (info,"address with specified id not found" );release_sock (sk);
Signature · 1 line
2.35.3
PATCH v2 11/15 mptcp: add mptcp_pm_nl_put_entry_info helper
In reply to Geliang TangThis patch extracts the nlmsg related code from mptcp_pm_nl_get_addr_doit() into a new helper mptcp_pm_nl_put_entry_info(). It will be used in the userspace PM get_addr().
--- net/mptcp/pm_netlink.c | 55 ++++++++++++++++++++++++------------------ net/mptcp/protocol.h | 2 ++ 2 files changed, 34 insertions(+), 23 deletions(-)
net/mptcp/pm_netlink.c +32 -23
@@ -1658,6 +1658,37 @@ static int mptcp_nl_fill_addr(struct sk_buff *skb,return -EMSGSIZE ; } +int mptcp_pm_nl_put_entry_info (struct genl_info *info, +struct mptcp_pm_addr_entry *entry) +{ +struct sk_buff *msg; +void *reply; +int ret; + + msg =nlmsg_new (NLMSG_DEFAULT_SIZE ,GFP_KERNEL ); +if (!msg) +return -ENOMEM ; + + reply =genlmsg_put_reply (msg, info, &mptcp_genl_family,0 , + info->genlhdr->cmd); +if (!reply) { +GENL_SET_ERR_MSG (info,"not enough space in Netlink message" ); + ret = -EMSGSIZE ; + goto fail; + } + + ret =mptcp_nl_fill_addr (msg, entry); +if (ret) + goto fail; + +genlmsg_end (msg, reply); + ret =genlmsg_reply (msg, info); +return ret; +fail: +nlmsg_free (msg); +return ret; +} +int mptcp_pm_nl_put_entry_msg (struct sk_buff *msg,struct netlink_callback *cb,struct mptcp_pm_addr_entry *entry)
@@ -1686,26 +1717,12 @@ int mptcp_pm_nl_get_addr_doit(struct sk_buff *skb, struct genl_info *info)struct nlattr *attr = info->attrs[MPTCP_PM_ENDPOINT_ADDR ];struct pm_nl_pernet *pernet =genl_info_pm_nl (info);struct mptcp_pm_addr_entry addr, *entry; -struct sk_buff *msg; -void *reply;int ret; ret =mptcp_pm_parse_entry (attr, info, false, &addr);if (ret <0 )return ret; - msg =nlmsg_new (NLMSG_DEFAULT_SIZE ,GFP_KERNEL ); -if (!msg) -return -ENOMEM ; - - reply =genlmsg_put_reply (msg, info, &mptcp_genl_family,0 , - info->genlhdr->cmd); -if (!reply) { -GENL_SET_ERR_MSG (info,"not enough space in Netlink message" ); - ret = -EMSGSIZE ; - goto fail; - } -spin_lock_bh (&pernet->lock); entry =__lookup_addr_by_id (pernet, addr.addr.id);if (!entry) {
@@ -1714,20 +1731,12 @@ int mptcp_pm_nl_get_addr_doit(struct sk_buff *skb, struct genl_info *info) goto unlock_fail; } - ret =mptcp_nl_fill_addr (msg, entry); -if (ret) - goto unlock_fail; - -genlmsg_end (msg, reply); - ret =genlmsg_reply (msg, info); + ret =mptcp_pm_nl_put_entry_info (info, entry);spin_unlock_bh (&pernet->lock);return ret; unlock_fail:spin_unlock_bh (&pernet->lock); - -fail: -nlmsg_free (msg);return ret; }
net/mptcp/protocol.h +2 -0
@@ -1025,6 +1025,8 @@ bool mptcp_pm_rm_addr_signal(struct mptcp_sock *msk, unsigned int remaining,int mptcp_pm_nl_put_entry_msg (struct sk_buff *msg,struct netlink_callback *cb,struct mptcp_pm_addr_entry *entry); +int mptcp_pm_nl_put_entry_info (struct genl_info *info, +struct mptcp_pm_addr_entry *entry);int mptcp_pm_get_local_id (struct mptcp_sock *msk,struct sock_common *skc);int mptcp_pm_nl_get_local_id (struct mptcp_sock *msk,struct mptcp_addr_info *skc);int mptcp_userspace_pm_get_local_id (struct mptcp_sock *msk,struct mptcp_addr_info *skc);
Signature · 1 line
2.35.3
PATCH v2 12/15 mptcp: implement mptcp_userspace_pm_get_addr
In reply to Geliang TangThis patch implements mptcp_userspace_pm_get_addr() to get an address from userspace pm address list according the given 'token' and 'id'. Use nla_get_u32() to get the u32 value of 'token', then pass it to mptcp_token_get_sock() to get the msk. Pass 'msk' and 'id' to the helper mptcp_userspace_pm_lookup_addr_by_id() to get the address entry. Put this entry to userspace using mptcp_pm_nl_put_entry_info().
--- net/mptcp/pm_userspace.c | 23 +++++++++++++++++++++++ net/mptcp/protocol.h | 2 ++ 2 files changed, 25 insertions(+)
net/mptcp/pm_userspace.c +23 -0
@@ -596,3 +596,26 @@ int mptcp_userspace_pm_dump_addr(struct sk_buff *msg, cb->args[0 ] = id;return msg->len; } + +int mptcp_userspace_pm_get_addr (struct net *net,struct genl_info *info, +u32 token,u8 id) +{ +struct mptcp_pm_addr_entry *entry; +struct mptcp_sock *msk; +int ret = -EINVAL ; + + msk =mptcp_token_get_sock (net, token); +if (!msk) +return ret; + +if (!mptcp_pm_is_userspace (msk)) +return ret; + + entry =mptcp_userspace_pm_lookup_addr_by_id (msk, id); +if (!entry) { +GENL_SET_ERR_MSG (info,"address not found" ); +return ret; + } + +return mptcp_pm_nl_put_entry_info (info, entry); +}
net/mptcp/protocol.h +2 -0
@@ -1032,6 +1032,8 @@ int mptcp_pm_nl_get_local_id(struct mptcp_sock *msk, struct mptcp_addr_info *skcint mptcp_userspace_pm_get_local_id (struct mptcp_sock *msk,struct mptcp_addr_info *skc);int mptcp_userspace_pm_dump_addr (struct sk_buff *msg,struct netlink_callback *cb); +int mptcp_userspace_pm_get_addr (struct net *net,struct genl_info *info, +u32 token,u8 id);void __init mptcp_pm_nl_init (void );void mptcp_pm_nl_work (struct mptcp_sock *msk);
Signature · 1 line
2.35.3
PATCH v2 13/15 mptcp: get addr in userspace pm list
In reply to Geliang TangIf a token is gotten in mptcp_pm_nl_get_addr_doit(), that means a userspace PM is used. Invoke mptcp_userspace_pm_get_addr() to get addr in userspace PM list.
--- net/mptcp/pm_netlink.c | 6 ++++++ 1 file changed, 6 insertions(+)
net/mptcp/pm_netlink.c +6 -0
@@ -1715,14 +1715,20 @@ int mptcp_pm_nl_put_entry_msg(struct sk_buff *msg,int mptcp_pm_nl_get_addr_doit (struct sk_buff *skb,struct genl_info *info) {struct nlattr *attr = info->attrs[MPTCP_PM_ENDPOINT_ADDR ]; +struct nlattr *token = info->attrs[MPTCP_PM_ATTR_TOKEN ];struct pm_nl_pernet *pernet =genl_info_pm_nl (info);struct mptcp_pm_addr_entry addr, *entry; +struct net *net =sock_net (skb->sk);int ret; ret =mptcp_pm_parse_entry (attr, info, false, &addr);if (ret <0 )return ret; +if (token) +return mptcp_userspace_pm_get_addr (net, info,nla_get_u32 (token), + addr.addr.id); +spin_lock_bh (&pernet->lock); entry =__lookup_addr_by_id (pernet, addr.addr.id);if (!entry) {
Signature · 1 line
2.35.3
PATCH v2 14/15 selftests: mptcp: add token for get_addr
In reply to Geliang TangThe command get_addr() of pm_nl_ctl can be used like this in in-kernel PM:
pm_nl_ctl get $id
This patch adds token argument for it to support userspace PM:
pm_nl_ctl get $id token $token
If 'token $token' is passed to get_addr(), copy it into the kernel netlink.
--- tools/testing/selftests/net/mptcp/pm_nl_ctl.c | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-)
tools/testing/selftests/net/mptcp/pm_nl_ctl.c +13 -1
@@ -1087,6 +1087,7 @@ int get_addr(int fd, int pm_family, int argc, char *argv[]) 1024];struct rtattr *rta, *nest;struct nlmsghdr *nh; +u_int32_t token =0 ;int nest_start;u_int8_t id;int off =0 ;
@@ -1097,10 +1098,12 @@ int get_addr(int fd, int pm_family, int argc, char *argv[]) MPTCP_PM_VER);/* the only argument is the address id */ -if (argc !=3 ) +if (argc !=3 && argc !=5 )syntax (argv); id =atoi (argv[2 ]); +if (argc ==5 && !strcmp (argv[3 ],"token" )) + token =strtoul (argv[4 ],NULL ,10 ); nest_start = off; nest = (void *)(data + off);
@@ -1116,6 +1119,15 @@ int get_addr(int fd, int pm_family, int argc, char *argv[]) off +=NLMSG_ALIGN (rta->rta_len); nest->rta_len = off - nest_start; +/* token */ +if (token) { + rta = (void *)(data + off); + rta->rta_type =MPTCP_PM_ATTR_TOKEN ; + rta->rta_len =RTA_LENGTH (4 ); +memcpy (RTA_DATA (rta), &token,4 ); + off +=NLMSG_ALIGN (rta->rta_len); + } +print_addrs (nh, pm_family,do_nl_req (fd, nh, off,sizeof (data)));return 0 ; }
Signature · 1 line
2.35.3
PATCH v2 15/15 selftests: mptcp: userspace pm get addr tests
In reply to Geliang TangThis patch adds a new helper userspace_pm_get_addr() in mptcp_join.sh. In it, parse the token value from the output of 'pm_nl_ctl events', then pass it to pm_nl_ctl get_addr command. Use this helper in userspace pm dump tests.
--- tools/testing/selftests/net/mptcp/mptcp_join.sh | 16 ++++++++++++++++ 1 file changed, 16 insertions(+)
tools/testing/selftests/net/mptcp/mptcp_join.sh +16 -0
@@ -3372,6 +3372,18 @@ userspace_pm_dump() ip netns exec $1 ./pm_nl_ctl dump token $tk } +# $1: ns ; $2: id +userspace_pm_get_addr() +{ + local evts=$evts_ns1 + local tk + + [ "$1" == "$ns2" ] && evts=$evts_ns2 + tk=$(mptcp_lib_evts_get_info token "$evts") + + ip netns exec $1 ./pm_nl_ctl get $2 token $tk +} + check_output() { local cmd="$1"
@@ -3602,6 +3614,8 @@ userspace_tests() chk_subflows_total 2 2 chk_mptcp_info add_addr_signal 1 add_addr_accepted 1 local dump="id 10 flags signal 10.0.2.1" + check_output "userspace_pm_get_addr $ns1 10" \ + "$dump" " get id 10 addr" check_output "userspace_pm_dump $ns1" \ "$dump" " dump addrs signal" kill_events_pids
@@ -3624,6 +3638,8 @@ userspace_tests() chk_mptcp_info subflows 1 subflows 1 chk_subflows_total 2 2 local dump="id 20 flags subflow 10.0.3.2" + check_output "userspace_pm_get_addr $ns2 20" \ + "$dump" " get id 20 addr" check_output "userspace_pm_dump $ns2" \ "$dump" " dump addrs subflow" kill_events_pids
Signature · 1 line
2.35.3
Re: selftests: mptcp: userspace pm get addr tests: Tests Results
Hi Geliang,
Thank you for your modifications, that's great!
Our CI did some validations and here is its report:
- KVM Validation: normal (except selftest_mptcp_join):
- Success! ✅:
- Task: https://cirrus-ci.com/task/4505113289555968
- Summary: https://api.cirrus-ci.com/v1/artifact/task/4505113289555968/summary/summary.txt
- KVM Validation: debug (except selftest_mptcp_join):
- Critical: 3 Call Trace(s) ❌:
- Task: https://cirrus-ci.com/task/5804062763909120
- Summary: https://api.cirrus-ci.com/v1/artifact/task/5804062763909120/summary/summary.txt
- KVM Validation: normal (only selftest_mptcp_join):
- Success! ✅:
- Task: https://cirrus-ci.com/task/5631013196398592
- Summary: https://api.cirrus-ci.com/v1/artifact/task/5631013196398592/summary/summary.txt
- KVM Validation: debug (only selftest_mptcp_join):
- Unstable: 1 failed test(s): selftest_mptcp_join - Critical: 3 Call Trace(s) ❌:
- Task: https://cirrus-ci.com/task/6193963149819904
- Summary: https://api.cirrus-ci.com/v1/artifact/task/6193963149819904/summary/summary.txt
Initiator: Patchew Applier
Commits: https://github.com/multipath-tcp/mptcp_net-next/commits/14e9a9fcd464
If there are some issues, you can reproduce them using the same environment as the one used by the CI thanks to a docker image, e.g.:
$ cd [kernel source code]
$ docker run -v "${PWD}:${PWD}:rw" -w "${PWD}" --privileged --rm -it \
--pull always mptcp/mptcp-upstream-virtme-docker:latest \
auto-debugFor more details:
https://github.com/multipath-tcp/mptcp-upstream-virtme-docker
Please note that despite all the efforts that have been already done to have a stable tests suite when executed on a public CI like here, it is possible some reported issues are not due to your modifications. Still, do not hesitate to help us improve that ;-)
Cheers,
MPTCP GH Action bot
Bot operated by Matthieu Baerts (NGI0 Core)