vvfat: Fix write bugs for large files and add iotests
Subsystems (2)
PATCH v2 1/5 vvfat: Fix bug in writing to middle of file
In reply to Amjad AlsharafiBefore this commit, the behavior when calling commit_one_file for example with offset=0x2000 (second cluster), what will happen is that we won't fetch the next cluster from the fat, and instead use the first cluster for the read operation.
This is due to off-by-one error here, where i=0x2000 !< offset=0x2000, thus not fetching the next cluster.
--- block/vvfat.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
block/vvfat.c +1 -1
@@ -2525,7 +2525,7 @@ commit_one_file(BDRVVVFATState* s, int dir_index, uint32_t offset)return -1 ; } -for (i = s->cluster_size; i < offset; i += s->cluster_size) +for (i = s->cluster_size; i <= offset; i += s->cluster_size) c =modified_fat_get (s, c); fd =qemu_open_old (mapping->path,O_RDWR |O_CREAT |O_BINARY ,0666 );
Signature · 1 line
2.44.0
PATCH v2 2/5 vvfat: Fix usage of `info.file.offset`
In reply to Amjad AlsharafiThe field is marked as "the offset in the file (in clusters)", but it was being used like this cluster_size*(nums)+mapping->info.file.offset, which is incorrect.
Additionally, removed the abort when first_mapping_index does not match, as this matches the case when adding new clusters for files, and its inevitable that we reach this condition when doing that if the clusters are not after one another, so there is no reason to abort here, execution continues and the new clusters are written to disk correctly.
--- block/vvfat.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-)
block/vvfat.c +4 -5
@@ -1408,7 +1408,7 @@ read_cluster_directory:assert (s->current_fd); - offset=s->cluster_size*(cluster_num-s->current_mapping->begin)+s->current_mapping->info.file.offset; + offset=s->cluster_size*((cluster_num - s->current_mapping->begin) + s->current_mapping->info.file.offset);if (lseek (s->current_fd, offset,SEEK_SET )!=offset)return -3 ; s->cluster=s->cluster_buffer;
@@ -1929,8 +1929,8 @@ get_cluster_count_for_direntry(BDRVVVFATState* s, direntry_t* direntry, const ch (mapping->mode & MODE_DIRECTORY) == 0) {/* was modified in qcow */ -if (offset != mapping->info.file.offset + s->cluster_size - * (cluster_num - mapping->begin)) { +if (offset != s->cluster_size + * ((cluster_num - mapping->begin) + mapping->info.file.offset)) {/* offset of this cluster in file chain has changed */ abort (); copy_it =1 ;
@@ -1944,7 +1944,6 @@ get_cluster_count_for_direntry(BDRVVVFATState* s, direntry_t* direntry, const chif (mapping->first_mapping_index != first_mapping_index && mapping->info.file.offset >0 ) { -abort (); copy_it =1 ; }
@@ -2404,7 +2403,7 @@ static int commit_mappings(BDRVVVFATState* s, (mapping->end - mapping->begin); }else next_mapping->info.file.offset = mapping->info.file.offset + - mapping->end - mapping->begin; + (mapping->end - mapping->begin); mapping = next_mapping; }
Signature · 1 line
2.44.0
PATCH v2 4/5 iotests: Add `vvfat` tests
In reply to Amjad AlsharafiAdded several tests to verify the implementation of the vvfat driver.
We needed a way to interact with it, so created a basic fat16.py driver that handled writing correct sectors for us.
--- tests/qemu-iotests/check | 2 +- tests/qemu-iotests/fat16.py | 507 +++++++++++++++++++++++++++++ tests/qemu-iotests/tests/vvfat | 400 +++++++++++++++++++++++ tests/qemu-iotests/tests/vvfat.out | 5 + 4 files changed, 913 insertions(+), 1 deletion(-) create mode 100644 tests/qemu-iotests/fat16.py create mode 100755 tests/qemu-iotests/tests/vvfat create mode 100755 tests/qemu-iotests/tests/vvfat.out
tests/qemu-iotests/check +1 -1
@@ -84,7 +84,7 @@ def make_argparser() -> argparse.ArgumentParser: p.set_defaults(imgfmt='raw', imgproto='file') format_list = ['raw', 'bochs', 'cloop', 'parallels', 'qcow', 'qcow2', - 'qed', 'vdi', 'vpc', 'vhdx', 'vmdk', 'luks', 'dmg'] + 'qed', 'vdi', 'vpc', 'vhdx', 'vmdk', 'luks', 'dmg', 'vvfat'] g_fmt = p.add_argument_group( ' image format options', 'The following options set the IMGFMT environment variable. '
tests/qemu-iotests/fat16.py new file +507 -0
507 lines not on this page · raw message
tests/qemu-iotests/tests/vvfat new file +400 -0
400 lines not on this page · raw message
tests/qemu-iotests/tests/vvfat.out new file +5 -0
@@ -0,0 +1,5 @@ +............. +---------------------------------------------------------------------- +Ran 13 tests + +OK
Signature · 1 line
2.44.0
v2 cover vvfat: Fix write bugs for large files and add iotests
v2:
Added iotests for vvfat driver along with a simple fat16 module to run the tests.
v1:
https://patchew.org/QEMU/[email protected]/
Fix the issue of writing to the middle of the file in vvfat
Amjad Alsharafi (5):
vvfat: Fix bug in writing to middle of file
vvfat: Fix usage of info.file.offset
vvfat: Fix reading files with non-continuous clusters
iotests: Add vvfat tests
iotests: Filter out vvfat fmt from failing tests
.gitlab-ci.d/buildtest.yml | 1 + block/vvfat.c | 32 +- tests/qemu-iotests/001 | 1 + tests/qemu-iotests/002 | 1 + tests/qemu-iotests/003 | 1 + tests/qemu-iotests/005 | 1 + tests/qemu-iotests/008 | 1 + tests/qemu-iotests/009 | 1 + tests/qemu-iotests/010 | 1 + tests/qemu-iotests/011 | 1 + tests/qemu-iotests/012 | 1 + tests/qemu-iotests/021 | 1 + tests/qemu-iotests/032 | 1 + tests/qemu-iotests/033 | 1 + tests/qemu-iotests/052 | 1 + tests/qemu-iotests/094 | 1 + tests/qemu-iotests/120 | 2 +- tests/qemu-iotests/140 | 1 + tests/qemu-iotests/145 | 1 + tests/qemu-iotests/157 | 1 + tests/qemu-iotests/159 | 2 +- tests/qemu-iotests/170 | 2 +- tests/qemu-iotests/192 | 1 + tests/qemu-iotests/197 | 2 +- tests/qemu-iotests/208 | 2 +- tests/qemu-iotests/215 | 2 +- tests/qemu-iotests/236 | 2 +- tests/qemu-iotests/251 | 1 + tests/qemu-iotests/307 | 2 +- tests/qemu-iotests/308 | 2 +- tests/qemu-iotests/check | 2 +- tests/qemu-iotests/fat16.py | 507 ++++++++++++++++++ tests/qemu-iotests/meson.build | 3 +- .../tests/export-incoming-iothread | 2 +- tests/qemu-iotests/tests/fuse-allow-other | 1 + .../tests/mirror-ready-cancel-error | 2 +- tests/qemu-iotests/tests/regression-vhdx-log | 1 + tests/qemu-iotests/tests/vvfat | 400 ++++++++++++++ tests/qemu-iotests/tests/vvfat.out | 5 + 39 files changed, 967 insertions(+), 26 deletions(-) create mode 100644 tests/qemu-iotests/fat16.py create mode 100755 tests/qemu-iotests/tests/vvfat create mode 100755 tests/qemu-iotests/tests/vvfat.out
Signature · 1 line
2.44.0
PATCH v2 5/5 iotests: Filter out `vvfat` fmt from failing tests
vvfat is a special format and not all tests (even generic) can run without crashing. So, added unsupported_fmt: vvfat to all failling tests.
Also added vvfat format into meson.build, vvfaat tests can be run on the block-thorough suite.
--- .gitlab-ci.d/buildtest.yml | 1 + tests/qemu-iotests/001 | 1 + tests/qemu-iotests/002 | 1 + tests/qemu-iotests/003 | 1 + tests/qemu-iotests/005 | 1 + tests/qemu-iotests/008 | 1 + tests/qemu-iotests/009 | 1 + tests/qemu-iotests/010 | 1 + tests/qemu-iotests/011 | 1 + tests/qemu-iotests/012 | 1 + tests/qemu-iotests/021 | 1 + tests/qemu-iotests/032 | 1 + tests/qemu-iotests/033 | 1 + tests/qemu-iotests/052 | 1 + tests/qemu-iotests/094 | 1 + tests/qemu-iotests/120 | 2 +- tests/qemu-iotests/140 | 1 + tests/qemu-iotests/145 | 1 + tests/qemu-iotests/157 | 1 + tests/qemu-iotests/159 | 2 +- tests/qemu-iotests/170 | 2 +- tests/qemu-iotests/192 | 1 + tests/qemu-iotests/197 | 2 +- tests/qemu-iotests/208 | 2 +- tests/qemu-iotests/215 | 2 +- tests/qemu-iotests/236 | 2 +- tests/qemu-iotests/251 | 1 + tests/qemu-iotests/307 | 2 +- tests/qemu-iotests/308 | 2 +- tests/qemu-iotests/meson.build | 3 ++- tests/qemu-iotests/tests/export-incoming-iothread | 2 +- tests/qemu-iotests/tests/fuse-allow-other | 1 + tests/qemu-iotests/tests/mirror-ready-cancel-error | 2 +- tests/qemu-iotests/tests/regression-vhdx-log | 1 + 34 files changed, 35 insertions(+), 12 deletions(-)
.gitlab-ci.d/buildtest.yml +1 -0
@@ -347,6 +347,7 @@ build-tcg-disabled: 124 132 139 142 144 145 151 152 155 157 165 194 196 200 202 208 209 216 218 227 234 246 247 248 250 254 255 257 258 260 261 262 263 264 270 272 273 277 279 image-fleecing + - ./check -vvfat vvfat build-user: extends: .native_build_job_template
tests/qemu-iotests/001 +1 -0
@@ -38,6 +38,7 @@ trap "_cleanup; exit \$status" 0 1 2 3 15 . ./common.filter _supported_fmt generic +_unsupported_fmt vvfat _supported_proto generic
tests/qemu-iotests/002 +1 -0
@@ -38,6 +38,7 @@ trap "_cleanup; exit \$status" 0 1 2 3 15 . ./common.filter _supported_fmt generic +_unsupported_fmt vvfat _supported_proto generic _unsupported_imgopts "subformat=streamOptimized"
tests/qemu-iotests/003 +1 -0
@@ -38,6 +38,7 @@ trap "_cleanup; exit \$status" 0 1 2 3 15 . ./common.filter _supported_fmt generic +_unsupported_fmt vvfat _supported_proto generic _unsupported_imgopts "subformat=streamOptimized"
tests/qemu-iotests/005 +1 -0
@@ -41,6 +41,7 @@ trap "_cleanup; exit \$status" 0 1 2 3 15 . ./common.filter _supported_fmt generic +_unsupported_fmt vvfat _supported_proto generic _supported_os Linux _unsupported_imgopts "subformat=twoGbMaxExtentFlat" \
tests/qemu-iotests/008 +1 -0
@@ -38,6 +38,7 @@ trap "_cleanup; exit \$status" 0 1 2 3 15 . ./common.filter _supported_fmt generic +_unsupported_fmt vvfat _supported_proto generic
tests/qemu-iotests/009 +1 -0
@@ -38,6 +38,7 @@ trap "_cleanup; exit \$status" 0 1 2 3 15 . ./common.filter _supported_fmt generic +_unsupported_fmt vvfat _supported_proto generic _unsupported_imgopts "subformat=streamOptimized"
tests/qemu-iotests/010 +1 -0
@@ -38,6 +38,7 @@ trap "_cleanup; exit \$status" 0 1 2 3 15 . ./common.filter _supported_fmt generic +_unsupported_fmt vvfat _supported_proto generic _unsupported_imgopts "subformat=streamOptimized"
tests/qemu-iotests/011 +1 -0
@@ -38,6 +38,7 @@ trap "_cleanup; exit \$status" 0 1 2 3 15 . ./common.filter _supported_fmt generic +_unsupported_fmt vvfat _supported_proto generic _unsupported_imgopts "subformat=streamOptimized"
tests/qemu-iotests/012 +1 -0
@@ -40,6 +40,7 @@ trap "_cleanup; exit \$status" 0 1 2 3 15 . ./common.filter _supported_fmt generic +_unsupported_fmt vvfat _supported_proto file # Remove once all tests are fixed to use TEST_IMG_FILE
tests/qemu-iotests/021 +1 -0
@@ -38,6 +38,7 @@ trap "_cleanup; exit \$status" 0 1 2 3 15 . ./common.filter _supported_fmt generic +_unsupported_fmt vvfat _supported_proto generic
tests/qemu-iotests/032 +1 -0
@@ -42,6 +42,7 @@ trap "_cleanup; exit \$status" 0 1 2 3 15 # This works for any image format (though unlikely to segfault for raw) _supported_fmt generic +_unsupported_fmt vvfat _supported_proto generic _unsupported_imgopts "subformat=streamOptimized"
tests/qemu-iotests/033 +1 -0
@@ -38,6 +38,7 @@ trap "_cleanup; exit \$status" 0 1 2 3 15 . ./common.filter _supported_fmt generic +_unsupported_fmt vvfat _supported_proto generic _unsupported_imgopts "subformat=streamOptimized"
tests/qemu-iotests/052 +1 -0
@@ -38,6 +38,7 @@ trap "_cleanup; exit \$status" 0 1 2 3 15 . ./common.filter _supported_fmt generic +_unsupported_fmt vvfat _supported_proto file # Don't do O_DIRECT on tmpfs
tests/qemu-iotests/094 +1 -0
@@ -42,6 +42,7 @@ trap "_cleanup; exit \$status" 0 1 2 3 15 . ./common.qemu _supported_fmt generic +_unsupported_fmt vvfat _supported_proto nbd _unsupported_imgopts "subformat=monolithicFlat" "subformat=twoGbMaxExtentFlat"
tests/qemu-iotests/120 +1 -1
@@ -40,7 +40,7 @@ trap "_cleanup; exit \$status" 0 1 2 3 15 _supported_fmt generic _supported_proto file fuse -_unsupported_fmt luks +_unsupported_fmt luks vvfat _require_drivers raw _make_test_img 64M
tests/qemu-iotests/140 +1 -0
@@ -45,6 +45,7 @@ trap "_cleanup; exit \$status" 0 1 2 3 15 . ./common.qemu _supported_fmt generic +_unsupported_fmt vvfat _supported_proto file fuse _supported_os Linux
tests/qemu-iotests/145 +1 -0
@@ -39,6 +39,7 @@ trap "_cleanup; exit \$status" 0 1 2 3 15 . ./common.filter _supported_fmt generic +_unsupported_fmt vvfat _supported_proto generic _make_test_img 1M
tests/qemu-iotests/157 +1 -0
@@ -38,6 +38,7 @@ trap "_cleanup; exit \$status" 0 1 2 3 15 . ./common.filter _supported_fmt generic +_unsupported_fmt vvfat _supported_proto file _require_devices virtio-blk
tests/qemu-iotests/159 +1 -1
@@ -39,7 +39,7 @@ trap "_cleanup; exit \$status" 0 1 2 3 15 _supported_fmt generic _supported_proto file -_unsupported_fmt luks +_unsupported_fmt luks vvfat TEST_SIZES="5 512 1024 1999 1K 64K 1M"
tests/qemu-iotests/170 +1 -1
@@ -39,7 +39,7 @@ trap "_cleanup; exit \$status" 0 1 2 3 15 _supported_fmt generic _supported_proto file -_unsupported_fmt luks +_unsupported_fmt luks vvfat echo echo "== Creating image =="
tests/qemu-iotests/192 +1 -0
@@ -42,6 +42,7 @@ trap "_cleanup; exit \$status" 0 1 2 3 15 . ./common.qemu _supported_fmt generic +_unsupported_fmt vvfat _supported_proto file if [ "$QEMU_DEFAULT_MACHINE" != "pc" ]; then
tests/qemu-iotests/197 +1 -1
@@ -53,7 +53,7 @@ trap "_cleanup; exit \$status" 0 1 2 3 15 _supported_fmt generic _supported_proto generic # LUKS support may be possible, but it complicates things. -_unsupported_fmt luks +_unsupported_fmt luks vvfat _unsupported_imgopts "subformat=streamOptimized" echo
tests/qemu-iotests/208 +1 -1
@@ -23,7 +23,7 @@ import iotests -iotests.script_initialize(supported_fmts=['generic']) +iotests.script_initialize(supported_fmts=['generic'], unsupported_fmts=['vvfat']) with iotests.FilePath('disk.img') as disk_img_path, \ iotests.FilePath('disk-snapshot.img') as disk_snapshot_img_path, \
tests/qemu-iotests/215 +1 -1
@@ -50,7 +50,7 @@ trap "_cleanup; exit \$status" 0 1 2 3 15 _supported_fmt generic _supported_proto generic # LUKS support may be possible, but it complicates things. -_unsupported_fmt luks +_unsupported_fmt luks vvfat _unsupported_imgopts "subformat=streamOptimized" echo
tests/qemu-iotests/236 +1 -1
@@ -23,7 +23,7 @@ import iotests from iotests import log -iotests.script_initialize(supported_fmts=['generic']) +iotests.script_initialize(supported_fmts=['generic'], unsupported_fmts=['vvfat']) size = 64 * 1024 * 1024 granularity = 64 * 1024
tests/qemu-iotests/251 +1 -0
@@ -39,6 +39,7 @@ trap "_cleanup; exit \$status" 0 1 2 3 15 . ./common.qemu _supported_fmt generic +_unsupported_fmt vvfat _supported_proto file _supported_os Linux _unsupported_imgopts "subformat=streamOptimized"
tests/qemu-iotests/307 +1 -1
@@ -27,7 +27,7 @@ import os # luks which requires special command lines) iotests.script_initialize( supported_fmts=['generic'], - unsupported_fmts=['luks', 'vpc'], + unsupported_fmts=['luks', 'vpc', 'vvfat'], supported_platforms=['linux'], )
tests/qemu-iotests/308 +1 -1
@@ -47,7 +47,7 @@ if [ "$IMGOPTSSYNTAX" = "true" ]; then fi # We need the image to have exactly the specified size, and VPC does # not allow that by default -_unsupported_fmt vpc +_unsupported_fmt vpc vvfat _supported_proto file # We create the FUSE export manually _supported_os Linux # We need /dev/urandom
tests/qemu-iotests/meson.build +2 -1
@@ -23,7 +23,8 @@ qemu_iotests_formats = { 'raw': 'slow', 'qed': 'thorough', 'vmdk': 'thorough', - 'vpc': 'thorough' + 'vpc': 'thorough', + 'vvfat': 'thorough', } foreach k, v : emulators
tests/qemu-iotests/tests/export-incoming-iothread +1 -1
@@ -75,5 +75,5 @@ class TestExportIncomingIothread(iotests.QMPTestCase): if __name__ == '__main__': iotests.main(supported_fmts=['generic'], - unsupported_fmts=['luks'], # Would need a secret + unsupported_fmts=['luks', 'vvfat'], # Would need a secret supported_protocols=['file'])
tests/qemu-iotests/tests/fuse-allow-other +1 -0
@@ -38,6 +38,7 @@ trap "_cleanup; exit \$status" 0 1 2 3 15 . ../common.qemu _supported_fmt generic +_unsupported_fmt vvfat _supported_proto file # We create the FUSE export manually
tests/qemu-iotests/tests/mirror-ready-cancel-error +1 -1
@@ -138,5 +138,5 @@ class TestMirrorReadyCancelError(iotests.QMPTestCase): if __name__ == '__main__': # LUKS would require special key-secret handling in add_blockdevs() iotests.main(supported_fmts=['generic'], - unsupported_fmts=['luks'], + unsupported_fmts=['luks', 'vvfat'], supported_protocols=['file'])
tests/qemu-iotests/tests/regression-vhdx-log +1 -0
@@ -40,6 +40,7 @@ cd .. . ./common.filter _supported_fmt generic +_unsupported_fmt vvfat _supported_proto generic _unsupported_imgopts "subformat=streamOptimized"
Signature · 1 line
2.44.0
PATCH v2 3/5 vvfat: Fix reading files with non-continuous clusters
In reply to Amjad AlsharafiWhen reading with read_cluster we get the mapping with find_mapping_for_cluster and then we call open_file for this mapping.
The issue appear when its the same file, but a second cluster that is not immediately after it, imagine clusters 500 -> 503, this will give us 2 mappings one has the range 500..501 and another 503..504, both point to the same file, but different offsets.
When we don't open the file since the path is the same, we won't assign s->current_mapping and thus accessing way out of bound of the file.
From our example above, after open_file (that didn't open anything) we will get the offset into the file with s->cluster_size*(cluster_num-s->current_mapping->begin), which will give us 0x2000 * (504-500), which is out of bound for this mapping and will produce some issues.
--- block/vvfat.c | 21 ++++++++++++++------- 1 file changed, 14 insertions(+), 7 deletions(-)
block/vvfat.c +14 -7
@@ -1360,15 +1360,22 @@ static int open_file(BDRVVVFATState* s,mapping_t* mapping) {if (!mapping)return -1 ; +int new_path =1 ;if (!s->current_mapping || -strcmp (s->current_mapping->path,mapping->path)) { -/* open file */ -int fd =qemu_open_old (mapping->path, + s->current_mapping->first_mapping_index!=mapping->first_mapping_index || + (new_path =strcmp (s->current_mapping->path,mapping->path))) { + +if (new_path) { +/* open file */ +int fd =qemu_open_old (mapping->path,O_RDONLY |O_BINARY |O_LARGEFILE ); -if (fd<0 ) -return -1 ; -vvfat_close_current_file (s); - s->current_fd = fd; +if (fd<0 ) +return -1 ; +vvfat_close_current_file (s); + + s->current_fd = fd; + } +assert (s->current_fd); s->current_mapping = mapping; }return 0 ;
Signature · 1 line
2.44.0
Explaination of the patch list:
These patches fix some bugs found when modifying files in vvfat. First, there was a bug when writing to the cluster 2 or above of a file, it will copy the cluster before it instead, so, when writing to cluster=2, the content of cluster=1 will be copied into disk instead in its place.
Another issue was modifying the clusters of a file and adding new clusters, this showed 2 issues:
- If the new cluster is not immediately after the last cluster, it will cause issues when reading from this file in the future.
- Generally, the usage of info.file.offset was incorrect, and the system would crash on abort() when the file is modified and a new cluster was added.
Also, added some iotests for vvfat , covering the this fix and also general behavior such as reading and writing to the first cluster which would pass even before this patch.
Quoted 61 lines · Amjad Alsharafi
v2:
Added iotests forvvfatdriver along with a simplefat16module to run the tests.v1:
https://patchew.org/QEMU/[email protected]/
Fix the issue of writing to the middle of the file in vvfatAmjad Alsharafi (5):
vvfat: Fix bug in writing to middle of file
vvfat: Fix usage ofinfo.file.offset
vvfat: Fix reading files with non-continuous clusters
iotests: Addvvfattests
iotests: Filter outvvfatfmt from failing tests
.gitlab-ci.d/buildtest.yml| 1 +block/vvfat.c| 32 +-tests/qemu-iotests/001 | 1 + tests/qemu-iotests/002 | 1 + tests/qemu-iotests/003 | 1 + tests/qemu-iotests/005 | 1 + tests/qemu-iotests/008 | 1 + tests/qemu-iotests/009 | 1 + tests/qemu-iotests/010 | 1 + tests/qemu-iotests/011 | 1 + tests/qemu-iotests/012 | 1 + tests/qemu-iotests/021 | 1 + tests/qemu-iotests/032 | 1 + tests/qemu-iotests/033 | 1 + tests/qemu-iotests/052 | 1 + tests/qemu-iotests/094 | 1 + tests/qemu-iotests/120 | 2 +- tests/qemu-iotests/140 | 1 + tests/qemu-iotests/145 | 1 + tests/qemu-iotests/157 | 1 + tests/qemu-iotests/159 | 2 +- tests/qemu-iotests/170 | 2 +- tests/qemu-iotests/192 | 1 + tests/qemu-iotests/197 | 2 +- tests/qemu-iotests/208 | 2 +- tests/qemu-iotests/215 | 2 +- tests/qemu-iotests/236 | 2 +- tests/qemu-iotests/251 | 1 + tests/qemu-iotests/307 | 2 +- tests/qemu-iotests/308 | 2 +-tests/qemu-iotests/check | 2 +-
tests/qemu-iotests/fat16.py| 507 ++++++++++++++++++ tests/qemu-iotests/meson.build | 3 +- .../tests/export-incoming-iothread | 2 +- tests/qemu-iotests/tests/fuse-allow-other | 1 + .../tests/mirror-ready-cancel-error | 2 +- tests/qemu-iotests/tests/regression-vhdx-log | 1 + tests/qemu-iotests/tests/vvfat | 400 ++++++++++++++ tests/qemu-iotests/tests/vvfat.out | 5 +39 files changed, 967 insertions(+), 26 deletions(-)create mode 100644
tests/qemu-iotests/fat16.pycreate mode 100755 tests/qemu-iotests/tests/vvfat create mode 100755 tests/qemu-iotests/tests/vvfat.out--
2.44.0