vvfat: Fix write bugs for large files and add iotests
v5 cover vvfat: Fix write bugs for large files and add iotests
These patches fix some bugs found when modifying files in vvfat. First, there was a bug when writing to the cluster 2 or above of a file, it will copy the cluster before it instead, so, when writing to cluster=2, the content of cluster=1 will be copied into disk instead in its place.
Another issue was modifying the clusters of a file and adding new clusters, this showed 2 issues:
- If the new cluster is not immediately after the last cluster, it will cause issues when reading from this file in the future.
- Generally, the usage of info.file.offset was incorrect, and the system would crash on abort() when the file is modified and a new cluster was added.
Also, added some iotests for vvfat, covering the this fix and also general behavior such as reading, writing, and creating files on the filesystem. Including tests for reading/writing the first cluster which
would pass even before this patch.
v5:
- Fix a bug in reading non-contiguous clusters in vvfat for more than 2 mappings.
- Added a test for adding more clusters where they are non-contiguous and result in 3 mappings (for the above fix).
- Split PATCH 2/4 into 2 patches and a better fix for the abort issue (now in PATCH 3/5).
- Other fixes and improvements in fat16.py module used for iotests.
v4:
Applied some suggestions from Kevin Wolf <[email protected]>:
- Fixed code formatting by following the coding style in scripts/checkpatch.pl
- Reduced changes related to iotests by setting vvfat format as non-generic.
- Added another test to cover the fix done in PATCH 2/4 and PATCH 3/4 for handling reading/writing files with non-continuous clusters.
v3:
Added test for creating new files in vvfat.
v2:
Added iotests for vvfat driver along with a simple fat16 module to run the tests.
v1:
https://patchew.org/QEMU/[email protected]/
Fix the issue of writing to the middle of the file in vvfat
Amjad Alsharafi (5):
vvfat: Fix bug in writing to middle of file
vvfat: Fix usage of info.file.offset
vvfat: Fix wrong checks for cluster mappings invariant
vvfat: Fix reading files with non-continuous clusters
iotests: Add vvfat tests
block/vvfat.c | 47 +- tests/qemu-iotests/check | 2 +- tests/qemu-iotests/fat16.py | 673 +++++++++++++++++++++++++++++ tests/qemu-iotests/testenv.py | 2 +- tests/qemu-iotests/tests/vvfat | 457 ++++++++++++++++++++ tests/qemu-iotests/tests/vvfat.out | 5 + 6 files changed, 1164 insertions(+), 22 deletions(-) create mode 100644 tests/qemu-iotests/fat16.py create mode 100755 tests/qemu-iotests/tests/vvfat create mode 100755 tests/qemu-iotests/tests/vvfat.out
Signature · 1 line
2.45.1
PATCH v5 1/5 vvfat: Fix bug in writing to middle of file
Before this commit, the behavior when calling commit_one_file for example with offset=0x2000 (second cluster), what will happen is that we won't fetch the next cluster from the fat, and instead use the first cluster for the read operation.
This is due to off-by-one error here, where i=0x2000 !< offset=0x2000, thus not fetching the next cluster.
--- block/vvfat.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
block/vvfat.c +2 -1
@@ -2525,8 +2525,9 @@ commit_one_file(BDRVVVFATState* s, int dir_index, uint32_t offset)return -1 ; } -for (i = s->cluster_size; i < offset; i += s->cluster_size) +for (i =0 ; i < offset; i += s->cluster_size) { c =modified_fat_get (s, c); + } fd =qemu_open_old (mapping->path,O_RDWR |O_CREAT |O_BINARY ,0666 );if (fd <0 ) {
Signature · 1 line
2.45.1
PATCH v5 4/5 vvfat: Fix reading files with non-continuous clusters
In reply to Amjad AlsharafiWhen reading with read_cluster we get the mapping with find_mapping_for_cluster and then we call open_file for this mapping.
The issue appear when its the same file, but a second cluster that is not immediately after it, imagine clusters 500 -> 503, this will give us 2 mappings one has the range 500..501 and another 503..504, both point to the same file, but different offsets.
When we don't open the file since the path is the same, we won't assign s->current_mapping and thus accessing way out of bound of the file.
From our example above, after open_file (that didn't open anything) we will get the offset into the file with s->cluster_size*(cluster_num-s->current_mapping->begin), which will give us 0x2000 * (504-500), which is out of bound for this mapping and will produce some issues.
--- block/vvfat.c | 23 ++++++++++++++++------- 1 file changed, 16 insertions(+), 7 deletions(-)
block/vvfat.c +16 -7
@@ -1360,15 +1360,24 @@ static int open_file(BDRVVVFATState* s,mapping_t* mapping) {if (!mapping)return -1 ; +int new_path =1 ;if (!s->current_mapping || -strcmp (s->current_mapping->path,mapping->path)) { -/* open file */ -int fd =qemu_open_old (mapping->path, + s->current_mapping->info.file.offset + != mapping->info.file.offset || + (new_path =strcmp (s->current_mapping->path, mapping->path))) { + +if (new_path) { +/* open file */ +int fd =qemu_open_old (mapping->path,O_RDONLY |O_BINARY |O_LARGEFILE ); -if (fd<0 ) -return -1 ; -vvfat_close_current_file (s); - s->current_fd = fd; +if (fd <0 ) { +return -1 ; + } +vvfat_close_current_file (s); + + s->current_fd = fd; + } +assert (s->current_fd); s->current_mapping = mapping; }return 0 ;
Signature · 1 line
2.45.1
PATCH v5 3/5 vvfat: Fix wrong checks for cluster mappings invariant
In reply to Amjad AlsharafiHow this abort was intended to check for was:
- if the mapping->first_mapping_index is not the same as first_mapping_index, which **should** happen only in one case, when we are handling the first mapping, in that case mapping->first_mapping_index == -1, in all other cases, the other mappings after the first should have the condition true.
- From above, we know that this is the first mapping, so if the offset is not 0, then abort, since this is an invalid state.
The issue was that first_mapping_index is not set if we are checking from the middle, the variable first_mapping_index is only set if we passed through the check cluster_was_modified with the first mapping, and in the same function call we checked the other mappings.
One approach is to go into the loop even if cluster_was_modified is not true so that we will be able to set first_mapping_index for the first mapping, but since first_mapping_index is only used here, another approach is to just check manually for the mapping->first_mapping_index != -1 since we know that this is the value for the only entry where offset == 0 (i.e. first mapping).
--- block/vvfat.c | 10 ++-------- 1 file changed, 2 insertions(+), 8 deletions(-)
block/vvfat.c +2 -8
@@ -1880,7 +1880,6 @@ get_cluster_count_for_direntry(BDRVVVFATState* s, direntry_t* direntry, const chuint32_t cluster_num =begin_of_direntry (direntry);uint32_t offset =0 ; -int first_mapping_index =-1 ;mapping_t * mapping =NULL ;const char * basename2 =NULL ;
@@ -1942,14 +1941,9 @@ get_cluster_count_for_direntry(BDRVVVFATState* s, direntry_t* direntry, const chif (strcmp (basename, basename2)) copy_it =1 ; - first_mapping_index =array_index (&(s->mapping), mapping); - } - -if (mapping->first_mapping_index != first_mapping_index - && mapping->info.file.offset >0 ) { -abort (); - copy_it =1 ; } +assert (mapping->first_mapping_index ==-1 + || mapping->info.file.offset >0 );/* need to write out? */ if (!was_modified &&is_file (direntry)) {
Signature · 1 line
2.45.1
PATCH v5 5/5 iotests: Add `vvfat` tests
In reply to Amjad AlsharafiAdded several tests to verify the implementation of the vvfat driver.
We needed a way to interact with it, so created a basic fat16.py driver that handled writing correct sectors for us.
Added vvfat to the non-generic formats, as its not a normal image format.
--- tests/qemu-iotests/check | 2 +- tests/qemu-iotests/fat16.py | 673 +++++++++++++++++++++++++++++ tests/qemu-iotests/testenv.py | 2 +- tests/qemu-iotests/tests/vvfat | 457 ++++++++++++++++++++ tests/qemu-iotests/tests/vvfat.out | 5 + 5 files changed, 1137 insertions(+), 2 deletions(-) create mode 100644 tests/qemu-iotests/fat16.py create mode 100755 tests/qemu-iotests/tests/vvfat create mode 100755 tests/qemu-iotests/tests/vvfat.out
tests/qemu-iotests/check +1 -1
@@ -84,7 +84,7 @@ def make_argparser() -> argparse.ArgumentParser: p.set_defaults(imgfmt='raw', imgproto='file') format_list = ['raw', 'bochs', 'cloop', 'parallels', 'qcow', 'qcow2', - 'qed', 'vdi', 'vpc', 'vhdx', 'vmdk', 'luks', 'dmg'] + 'qed', 'vdi', 'vpc', 'vhdx', 'vmdk', 'luks', 'dmg', 'vvfat'] g_fmt = p.add_argument_group( ' image format options', 'The following options set the IMGFMT environment variable. '
tests/qemu-iotests/fat16.py new file +673 -0
673 lines not on this page · raw message
tests/qemu-iotests/testenv.py +1 -1
@@ -250,7 +250,7 @@ def __init__(self, source_dir: str, build_dir: str, self.qemu_img_options = os.getenv('QEMU_IMG_OPTIONS') self.qemu_nbd_options = os.getenv('QEMU_NBD_OPTIONS') - is_generic = self.imgfmt not in ['bochs', 'cloop', 'dmg'] + is_generic = self.imgfmt not in ['bochs', 'cloop', 'dmg', 'vvfat'] self.imgfmt_generic = 'true' if is_generic else 'false' self.qemu_io_options = f'--cache {self.cachemode} --aio {self.aiomode}'
tests/qemu-iotests/tests/vvfat new file +457 -0
457 lines not on this page · raw message
tests/qemu-iotests/tests/vvfat.out new file +5 -0
@@ -0,0 +1,5 @@ +................ +---------------------------------------------------------------------- +Ran 16 tests + +OK
Signature · 1 line
2.45.1
PATCH v5 2/5 vvfat: Fix usage of `info.file.offset`
In reply to Amjad AlsharafiThe field is marked as "the offset in the file (in clusters)", but it was being used like this cluster_size*(nums)+mapping->info.file.offset, which is incorrect.
--- block/vvfat.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-)
block/vvfat.c +7 -4
@@ -1408,7 +1408,9 @@ read_cluster_directory:assert (s->current_fd); - offset=s->cluster_size*(cluster_num-s->current_mapping->begin)+s->current_mapping->info.file.offset; + offset = s->cluster_size * + ((cluster_num - s->current_mapping->begin) + + s->current_mapping->info.file.offset);if (lseek (s->current_fd, offset,SEEK_SET )!=offset)return -3 ; s->cluster=s->cluster_buffer;
@@ -1929,8 +1931,9 @@ get_cluster_count_for_direntry(BDRVVVFATState* s, direntry_t* direntry, const ch (mapping->mode & MODE_DIRECTORY) == 0) {/* was modified in qcow */ -if (offset != mapping->info.file.offset + s->cluster_size - * (cluster_num - mapping->begin)) { +if (offset != s->cluster_size + * ((cluster_num - mapping->begin) + + mapping->info.file.offset)) {/* offset of this cluster in file chain has changed */ abort (); copy_it =1 ;
@@ -2404,7 +2407,7 @@ static int commit_mappings(BDRVVVFATState* s, (mapping->end - mapping->begin); }else next_mapping->info.file.offset = mapping->info.file.offset + - mapping->end - mapping->begin; + (mapping->end - mapping->begin); mapping = next_mapping; }
Signature · 1 line
2.45.1
Re: [PATCH v5 5/5] iotests: Add `vvfat` tests
In reply to Amjad AlsharafiQuoted 1,201 lines · Amjad Alsharafi
Added several tests to verify the implementation of the vvfat driver.
We needed a way to interact with it, so created a basic
fat16.pydriver that handled writing correct sectors for us.Added
vvfatto the non-generic formats, as its not a normal image format.Signed-off-by Amjad Alsharafi <[email protected]>--- tests/qemu-iotests/check | 2 +- tests/qemu-iotests/fat16.py | 673 +++++++++++++++++++++++++++++ tests/qemu-iotests/testenv.py | 2 +- tests/qemu-iotests/tests/vvfat | 457 ++++++++++++++++++++ tests/qemu-iotests/tests/vvfat.out | 5 + 5 files changed, 1137 insertions(+), 2 deletions(-) create mode 100644 tests/qemu-iotests/fat16.py create mode 100755 tests/qemu-iotests/tests/vvfat create mode 100755 tests/qemu-iotests/tests/vvfat.outtests/qemu-iotests/check +1
-1@@ -84,7 +84,7 @@ def make_argparser() -> argparse.ArgumentParser: p.set_defaults(imgfmt='raw', imgproto='file') format_list = ['raw', 'bochs', 'cloop', 'parallels', 'qcow', 'qcow2', - 'qed', 'vdi', 'vpc', 'vhdx', 'vmdk', 'luks', 'dmg'] + 'qed', 'vdi', 'vpc', 'vhdx', 'vmdk', 'luks', 'dmg', 'vvfat'] g_fmt = p.add_argument_group( ' image format options', 'The following options set the IMGFMT environment variable. 'tests/qemu-iotests/fat16.py new file +673
-0@@ -0,0 +1,673 @@ +# A simple FAT16 driver that is used to test the `vvfat` driver in QEMU. +# +# Copyright (C) 2024 Amjad Alsharafi <[email protected]> +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. + +from typing import List +import string + +SECTOR_SIZE = 512 +DIRENTRY_SIZE = 32 +ALLOWED_FILE_CHARS = set( + "!#$%&'()-@^_`{}~" + string.digits + string.ascii_uppercase +) + + +class MBR: + def __init__(self, data: bytes): + assert len(data) == 512 + self.partition_table = [] + for i in range(4): + partition = data[446 + i * 16 : 446 + (i + 1) * 16] + self.partition_table.append( + { + "status": partition[0], + "start_head": partition[1], + "start_sector": partition[2] & 0x3F, + "start_cylinder": ((partition[2] & 0xC0) << 2) + | partition[3], + "type": partition[4], + "end_head": partition[5], + "end_sector": partition[6] & 0x3F, + "end_cylinder": ((partition[6] & 0xC0) << 2) | partition[7], + "start_lba": int.from_bytes(partition[8:12], "little"), + "size": int.from_bytes(partition[12:16], "little"), + } + ) + + def __str__(self): + return "\n".join( + [ + f"{i}: {partition}" + for i, partition in enumerate(self.partition_table) + ] + ) + + +class FatBootSector: + def __init__(self, data: bytes): + assert len(data) == 512 + self.bytes_per_sector = int.from_bytes(data[11:13], "little") + self.sectors_per_cluster = data[13] + self.reserved_sectors = int.from_bytes(data[14:16], "little") + self.fat_count = data[16] + self.root_entries = int.from_bytes(data[17:19], "little") + total_sectors_16 = int.from_bytes(data[19:21], "little") + self.media_descriptor = data[21] + self.sectors_per_fat = int.from_bytes(data[22:24], "little") + self.sectors_per_track = int.from_bytes(data[24:26], "little") + self.heads = int.from_bytes(data[26:28], "little") + self.hidden_sectors = int.from_bytes(data[28:32], "little") + total_sectors_32 = int.from_bytes(data[32:36], "little") + assert ( + total_sectors_16 == 0 or total_sectors_32 == 0 + ), "Both total sectors (16 and 32) fields are non-zero" + self.total_sectors = total_sectors_16 or total_sectors_32 + self.drive_number = data[36] + self.volume_id = int.from_bytes(data[39:43], "little") + self.volume_label = data[43:54].decode("ascii").strip() + self.fs_type = data[54:62].decode("ascii").strip() + + def root_dir_start(self): + """ + Calculate the start sector of the root directory. + """ + return self.reserved_sectors + self.fat_count * self.sectors_per_fat + + def root_dir_size(self): + """ + Calculate the size of the root directory in sectors. + """ + return ( + self.root_entries * DIRENTRY_SIZE + self.bytes_per_sector - 1 + ) // self.bytes_per_sector + + def data_sector_start(self): + """ + Calculate the start sector of the data region. + """ + return self.root_dir_start() + self.root_dir_size() + + def first_sector_of_cluster(self, cluster: int): + """ + Calculate the first sector of the given cluster. + """ + return ( + self.data_sector_start() + (cluster - 2) * self.sectors_per_cluster + ) + + def cluster_bytes(self): + """ + Calculate the number of bytes in a cluster. + """ + return self.bytes_per_sector * self.sectors_per_cluster + + def __str__(self): + return ( + f"Bytes per sector: {self.bytes_per_sector}\n" + f"Sectors per cluster: {self.sectors_per_cluster}\n" + f"Reserved sectors: {self.reserved_sectors}\n" + f"FAT count: {self.fat_count}\n" + f"Root entries: {self.root_entries}\n" + f"Total sectors: {self.total_sectors}\n" + f"Media descriptor: {self.media_descriptor}\n" + f"Sectors per FAT: {self.sectors_per_fat}\n" + f"Sectors per track: {self.sectors_per_track}\n" + f"Heads: {self.heads}\n" + f"Hidden sectors: {self.hidden_sectors}\n" + f"Drive number: {self.drive_number}\n" + f"Volume ID: {self.volume_id}\n" + f"Volume label: {self.volume_label}\n" + f"FS type: {self.fs_type}\n" + ) + + +class FatDirectoryEntry: + def __init__(self, data: bytes, sector: int, offset: int): + self.name = data[0:8].decode("ascii").strip() + self.ext = data[8:11].decode("ascii").strip() + self.attributes = data[11] + self.reserved = data[12] + self.create_time_tenth = data[13] + self.create_time = int.from_bytes(data[14:16], "little") + self.create_date = int.from_bytes(data[16:18], "little") + self.last_access_date = int.from_bytes(data[18:20], "little") + high_cluster = int.from_bytes(data[20:22], "little") + self.last_mod_time = int.from_bytes(data[22:24], "little") + self.last_mod_date = int.from_bytes(data[24:26], "little") + low_cluster = int.from_bytes(data[26:28], "little") + self.cluster = (high_cluster << 16) | low_cluster + self.size_bytes = int.from_bytes(data[28:32], "little") + + # extra (to help write back to disk) + self.sector = sector + self.offset = offset + + def as_bytes(self) -> bytes: + return ( + self.name.ljust(8, " ").encode("ascii") + + self.ext.ljust(3, " ").encode("ascii") + + self.attributes.to_bytes(1, "little") + + self.reserved.to_bytes(1, "little") + + self.create_time_tenth.to_bytes(1, "little") + + self.create_time.to_bytes(2, "little") + + self.create_date.to_bytes(2, "little") + + self.last_access_date.to_bytes(2, "little") + + (self.cluster >> 16).to_bytes(2, "little") + + self.last_mod_time.to_bytes(2, "little") + + self.last_mod_date.to_bytes(2, "little") + + (self.cluster & 0xFFFF).to_bytes(2, "little") + + self.size_bytes.to_bytes(4, "little") + ) + + def whole_name(self): + if self.ext: + return f"{self.name}.{self.ext}" + else: + return self.name + + def __str__(self): + return ( + f"Name: {self.name}\n" + f"Ext: {self.ext}\n" + f"Attributes: {self.attributes}\n" + f"Reserved: {self.reserved}\n" + f"Create time tenth: {self.create_time_tenth}\n" + f"Create time: {self.create_time}\n" + f"Create date: {self.create_date}\n" + f"Last access date: {self.last_access_date}\n" + f"Last mod time: {self.last_mod_time}\n" + f"Last mod date: {self.last_mod_date}\n" + f"Cluster: {self.cluster}\n" + f"Size: {self.size_bytes}\n" + ) + + def __repr__(self): + # convert to dict + return str(vars(self)) + + +class Fat16: + def __init__( + self, + start_sector: int, + size: int, + sector_reader: callable, + sector_writer: callable, + ): + self.start_sector = start_sector + self.size_in_sectors = size + self.sector_reader = sector_reader + self.sector_writer = sector_writer + + self.boot_sector = FatBootSector(self.sector_reader(start_sector)) + + fat_size_in_sectors = ( + self.boot_sector.sectors_per_fat * self.boot_sector.fat_count + ) + self.fats = self.read_sectors( + self.boot_sector.reserved_sectors, fat_size_in_sectors + ) + self.fats_dirty_sectors = set() + + def read_sectors(self, start_sector: int, num_sectors: int) -> bytes: + return self.sector_reader(start_sector + self.start_sector, num_sectors) + + def write_sectors(self, start_sector: int, data: bytes): + return self.sector_writer(start_sector + self.start_sector, data) + + def directory_from_bytes( + self, data: bytes, start_sector: int + ) -> List[FatDirectoryEntry]: + """ + Convert `bytes` into a list of `FatDirectoryEntry` objects. + Will ignore long file names. + Will stop when it encounters a 0x00 byte. + """ + + entries = [] + for i in range(0, len(data), DIRENTRY_SIZE): + entry = data[i : i + DIRENTRY_SIZE] + + current_sector = start_sector + (i // SECTOR_SIZE) + current_offset = i % SECTOR_SIZE + + if entry[0] == 0: + break + elif entry[0] == 0xE5: + # Deleted file + continue + + if entry[11] & 0xF == 0xF: + # Long file name + continue + + entries.append( + FatDirectoryEntry(entry, current_sector, current_offset) + ) + return entries + + def read_root_directory(self) -> List[FatDirectoryEntry]: + root_dir = self.read_sectors( + self.boot_sector.root_dir_start(), self.boot_sector.root_dir_size() + ) + return self.directory_from_bytes( + root_dir, self.boot_sector.root_dir_start() + ) + + def read_fat_entry(self, cluster: int) -> int: + """ + Read the FAT entry for the given cluster. + """ + fat_offset = cluster * 2 # FAT16 + return int.from_bytes(self.fats[fat_offset : fat_offset + 2], "little") + + def write_fat_entry(self, cluster: int, value: int): + """ + Write the FAT entry for the given cluster. + """ + fat_offset = cluster * 2 + self.fats = ( + self.fats[:fat_offset] + + value.to_bytes(2, "little") + + self.fats[fat_offset + 2 :] + ) + self.fats_dirty_sectors.add(fat_offset // SECTOR_SIZE) + + def flush_fats(self): + """ + Write the FATs back to the disk. + """ + for sector in self.fats_dirty_sectors: + data = self.fats[sector * SECTOR_SIZE : (sector + 1) * SECTOR_SIZE] + sector = self.boot_sector.reserved_sectors + sector + self.write_sectors(sector, data) + self.fats_dirty_sectors = set() + + def next_cluster(self, cluster: int) -> int | None: + """ + Get the next cluster in the chain. + If its `None`, then its the last cluster. + The function will crash if the next cluster + is `FREE` (unexpected) or invalid entry. + """ + fat_entry = self.read_fat_entry(cluster) + if fat_entry == 0: + raise Exception("Unexpected: FREE cluster") + elif fat_entry == 1: + raise Exception("Unexpected: RESERVED cluster") + elif fat_entry >= 0xFFF8: + return None + elif fat_entry >= 0xFFF7: + raise Exception("Invalid FAT entry") + else: + return fat_entry + + def next_free_cluster(self) -> int: + """ + Find the next free cluster. + """ + # simple linear search + for i in range(2, 0xFFFF): + if self.read_fat_entry(i) == 0: + return i + raise Exception("No free clusters") + + def next_free_cluster_non_continuous(self) -> int: + """ + Find the next free cluster, but makes sure + that the cluster before and after it are not allocated. + """ + # simple linear search + before = False + for i in range(2, 0xFFFF): + if self.read_fat_entry(i) == 0: + if before and self.read_fat_entry(i + 1) == 0: + return i + else: + before = True + else: + before = False + + raise Exception("No free clusters") + + def read_cluster(self, cluster: int) -> bytes: + """ + Read the cluster at the given cluster. + """ + return self.read_sectors( + self.boot_sector.first_sector_of_cluster(cluster), + self.boot_sector.sectors_per_cluster, + ) + + def write_cluster(self, cluster: int, data: bytes): + """ + Write the cluster at the given cluster. + """ + assert len(data) == self.boot_sector.cluster_bytes() + return self.write_sectors( + self.boot_sector.first_sector_of_cluster(cluster), + data, + ) + + def read_directory(self, cluster: int) -> List[FatDirectoryEntry]: + """ + Read the directory at the given cluster. + """ + entries = [] + while cluster is not None: + data = self.read_cluster(cluster) + entries.extend( + self.directory_from_bytes( + data, self.boot_sector.first_sector_of_cluster(cluster) + ) + ) + cluster = self.next_cluster(cluster) + return entries + + def add_direntry( + self, cluster: int | None, name: str, ext: str, attributes: int + ): + """ + Add a new directory entry to the given cluster. + If the cluster is `None`, then it will be added to the root directory. + """ + + def find_free_entry(data: bytes): + for i in range(0, len(data), DIRENTRY_SIZE): + entry = data[i : i + DIRENTRY_SIZE] + if entry[0] == 0 or entry[0] == 0xE5: + return i + return None + + assert len(name) <= 8, "Name must be 8 characters or less" + assert len(ext) <= 3, "Ext must be 3 characters or less" + assert attributes % 0x15 != 0x15, "Invalid attributes" + + # initial dummy data + new_entry = FatDirectoryEntry(b"\0" * 32, 0, 0) + new_entry.name = name.ljust(8, " ") + new_entry.ext = ext.ljust(3, " ") + new_entry.attributes = attributes + new_entry.reserved = 0 + new_entry.create_time_tenth = 0 + new_entry.create_time = 0 + new_entry.create_date = 0 + new_entry.last_access_date = 0 + new_entry.last_mod_time = 0 + new_entry.last_mod_date = 0 + new_entry.cluster = self.next_free_cluster() + new_entry.size_bytes = 0 + + # mark as EOF + self.write_fat_entry(new_entry.cluster, 0xFFFF) + + if cluster is None: + for i in range(self.boot_sector.root_dir_size()): + sector_data = self.read_sectors( + self.boot_sector.root_dir_start() + i, 1 + ) + offset = find_free_entry(sector_data) + if offset is not None: + new_entry.sector = self.boot_sector.root_dir_start() + i + new_entry.offset = offset + self.update_direntry(new_entry) + return new_entry + else: + while cluster is not None: + data = self.read_cluster(cluster) + offset = find_free_entry(data) + if offset is not None: + new_entry.sector = self.boot_sector.first_sector_of_cluster( + cluster + ) + (offset // SECTOR_SIZE) + new_entry.offset = offset % SECTOR_SIZE + self.update_direntry(new_entry) + return new_entry + cluster = self.next_cluster(cluster) + + raise Exception("No free directory entries") + + def update_direntry(self, entry: FatDirectoryEntry): + """ + Write the directory entry back to the disk. + """ + sector = self.read_sectors(entry.sector, 1) + sector = ( + sector[: entry.offset] + + entry.as_bytes() + + sector[entry.offset + DIRENTRY_SIZE :] + ) + self.write_sectors(entry.sector, sector) + + def find_direntry(self, path: str) -> FatDirectoryEntry | None: + """ + Find the directory entry for the given path. + """ + assert path[0] == "/", "Path must start with /" + + path = path[1:] # remove the leading / + parts = path.split("/") + directory = self.read_root_directory() + + current_entry = None + + for i, part in enumerate(parts): + is_last = i == len(parts) - 1 + + for entry in directory: + if entry.whole_name() == part: + current_entry = entry + break + if current_entry is None: + return None + + if is_last: + return current_entry + else: + if current_entry.attributes & 0x10 == 0: + raise Exception( + f"{current_entry.whole_name()} is not a directory" + ) + else: + directory = self.read_directory(current_entry.cluster) + + def read_file(self, entry: FatDirectoryEntry) -> bytes: + """ + Read the content of the file at the given path. + """ + if entry is None: + return None + if entry.attributes & 0x10 != 0: + raise Exception(f"{entry.whole_name()} is a directory") + + data = b"" + cluster = entry.cluster + while cluster is not None and len(data) <= entry.size_bytes: + data += self.read_cluster(cluster) + cluster = self.next_cluster(cluster) + return data[: entry.size_bytes] + + def truncate_file( + self, + entry: FatDirectoryEntry, + new_size: int, + allocate_non_continuous: bool = False, + ): + """ + Truncate the file at the given path to the new size. + """ + if entry is None: + return Exception("entry is None") + if entry.attributes & 0x10 != 0: + raise Exception(f"{entry.whole_name()} is a directory") + + def clusters_from_size(size: int): + return ( + size + self.boot_sector.cluster_bytes() - 1 + ) // self.boot_sector.cluster_bytes() + + # First, allocate new FATs if we need to + required_clusters = clusters_from_size(new_size) + current_clusters = clusters_from_size(entry.size_bytes) + + affected_clusters = set() + + # Keep at least one cluster, easier to manage this way + if required_clusters == 0: + required_clusters = 1 + if current_clusters == 0: + current_clusters = 1 + + if required_clusters > current_clusters: + # Allocate new clusters + cluster = entry.cluster + to_add = required_clusters + for _ in range(current_clusters - 1): + to_add -= 1 + cluster = self.next_cluster(cluster) + assert required_clusters > 0, "No new clusters to allocate" + assert cluster is not None, "Cluster is None" + assert ( + self.next_cluster(cluster) is None + ), "Cluster is not the last cluster" + + # Allocate new clusters + for _ in range(to_add - 1): + new_cluster = self.next_free_cluster() + if allocate_non_continuous: + new_cluster = self.next_free_cluster_non_continuous() + self.write_fat_entry(cluster, new_cluster) + self.write_fat_entry(new_cluster, 0xFFFF) + cluster = new_cluster + + elif required_clusters < current_clusters: + # Truncate the file + cluster = entry.cluster + for _ in range(required_clusters - 1): + cluster = self.next_cluster(cluster) + assert cluster is not None, "Cluster is None" + + next_cluster = self.next_cluster(cluster) + # mark last as EOF + self.write_fat_entry(cluster, 0xFFFF) + # free the rest + while next_cluster is not None: + cluster = next_cluster + next_cluster = self.next_cluster(next_cluster) + self.write_fat_entry(cluster, 0) + + self.flush_fats() + + # verify number of clusters + cluster = entry.cluster + count = 0 + while cluster is not None: + count += 1 + affected_clusters.add(cluster) + cluster = self.next_cluster(cluster) + assert ( + count == required_clusters + ), f"Expected {required_clusters} clusters, got {count}" + + # update the size + entry.size_bytes = new_size + self.update_direntry(entry) + + # trigger every affected cluster + for cluster in affected_clusters: + first_sector = self.boot_sector.first_sector_of_cluster(cluster) + first_sector_data = self.read_sectors(first_sector, 1) + self.write_sectors(first_sector, first_sector_data) + + def write_file(self, entry: FatDirectoryEntry, data: bytes): + """ + Write the content of the file at the given path. + """ + if entry is None: + return Exception("entry is None") + if entry.attributes & 0x10 != 0: + raise Exception(f"{entry.whole_name()} is a directory") + + data_len = len(data) + + self.truncate_file(entry, data_len) + + cluster = entry.cluster + while cluster is not None: + data_to_write = data[: self.boot_sector.cluster_bytes()] + last_data = False + if len(data_to_write) < self.boot_sector.cluster_bytes(): + last_data = True + old_data = self.read_cluster(cluster) + data_to_write += old_data[len(data_to_write) :] + + self.write_cluster(cluster, data_to_write) + data = data[self.boot_sector.cluster_bytes() :] + if len(data) == 0: + break + cluster = self.next_cluster(cluster) + + assert ( + len(data) == 0 + ), "Data was not written completely, clusters missing" + + def create_file(self, path: str): + """ + Create a new file at the given path. + """ + assert path[0] == "/", "Path must start with /" + + path = path[1:] # remove the leading / + + parts = path.split("/") + + directory_cluster = None + directory = self.read_root_directory() + + parts, filename = parts[:-1], parts[-1] + + for i, part in enumerate(parts): + current_entry = None + for entry in directory: + if entry.whole_name() == part: + current_entry = entry + break + if current_entry is None: + return None + + if current_entry.attributes & 0x10 == 0: + raise Exception( + f"{current_entry.whole_name()} is not a directory" + ) + else: + directory = self.read_directory(current_entry.cluster) + directory_cluster = current_entry.cluster + + # add new entry to the directory + + filename, ext = filename.split(".") + + if len(ext) > 3: + raise Exception("Ext must be 3 characters or less") + if len(filename) > 8: + raise Exception("Name must be 8 characters or less") + + for c in filename + ext: + + if c not in ALLOWED_FILE_CHARS: + raise Exception("Invalid character in filename") + + return self.add_direntry(directory_cluster, filename, ext, 0)tests/qemu-iotests/testenv.py +1
-1@@ -250,7 +250,7 @@ def __init__(self, source_dir: str, build_dir: str, self.qemu_img_options = os.getenv('QEMU_IMG_OPTIONS') self.qemu_nbd_options = os.getenv('QEMU_NBD_OPTIONS') - is_generic = self.imgfmt not in ['bochs', 'cloop', 'dmg'] + is_generic = self.imgfmt not in ['bochs', 'cloop', 'dmg', 'vvfat'] self.imgfmt_generic = 'true' if is_generic else 'false' self.qemu_io_options = f'--cache {self.cachemode} --aio {self.aiomode}'tests/qemu-iotests/tests/vvfat new file +457
-0@@ -0,0 +1,457 @@ +#!/usr/bin/env python3 +# group: rw vvfat +# +# Test vvfat driver implementation +# Here, we use a simple FAT16 implementation and check the behavior of the vvfat driver. +# +# Copyright (C) 2024 Amjad Alsharafi <[email protected]> +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. + +import os, shutil +import iotests +from iotests import imgfmt, QMPTestCase +from fat16 import MBR, Fat16, DIRENTRY_SIZE + +filesystem = os.path.join(iotests.test_dir, "filesystem") + +nbd_sock = iotests.file_path("nbd.sock", base_dir=iotests.sock_dir) +nbd_uri = "nbd+unix:///disk?socket=" + nbd_sock + +SECTOR_SIZE = 512 + + +class TestVVFatDriver(QMPTestCase): + def setUp(self) -> None: + if os.path.exists(filesystem): + if os.path.isdir(filesystem): + shutil.rmtree(filesystem) + else: + print(f"Error: {filesystem} exists and is not a directory") + exit(1) + os.mkdir(filesystem) + + # Add some text files to the filesystem + for i in range(10): + with open(os.path.join(filesystem, f"file{i}.txt"), "w") as f: + f.write(f"Hello, world! {i}\n") + + # Add 2 large files, above the cluster size (8KB) + with open(os.path.join(filesystem, "large1.txt"), "wb") as f: + # write 'A' * 1KB, 'B' * 1KB, 'C' * 1KB, ... + for i in range(8 * 2): # two clusters + f.write(bytes([0x41 + i] * 1024)) + + with open(os.path.join(filesystem, "large2.txt"), "wb") as f: + # write 'A' * 1KB, 'B' * 1KB, 'C' * 1KB, ... + for i in range(8 * 3): # 3 clusters + f.write(bytes([0x41 + i] * 1024)) + + self.vm = iotests.VM() + + self.vm.add_blockdev( + self.vm.qmp_to_opts( + { + "driver": imgfmt, + "node-name": "disk", + "rw": "true", + "fat-type": "16", + "dir": filesystem, + } + ) + ) + + self.vm.launch() + + self.vm.qmp_log("block-dirty-bitmap-add", **{"node": "disk", "name": "bitmap0"}) + + # attach nbd server + self.vm.qmp_log( + "nbd-server-start", + **{"addr": {"type": "unix", "data": {"path": nbd_sock}}}, + filters=[], + ) + + self.vm.qmp_log( + "nbd-server-add", + **{"device": "disk", "writable": True, "bitmap": "bitmap0"}, + ) + + self.qio = iotests.QemuIoInteractive("-f", "raw", nbd_uri) + + def tearDown(self) -> None: + self.qio.close() + self.vm.shutdown() + # print(self.vm.get_log()) + shutil.rmtree(filesystem) + + def read_sectors(self, sector: int, num: int = 1) -> bytes: + """ + Read `num` sectors starting from `sector` from the `disk`. + This uses `QemuIoInteractive` to read the sectors into `stdout` and then parse the output. + """ + self.assertGreater(num, 0) + # The output contains the content of the sector in hex dump format + # We need to extract the content from it + output = self.qio.cmd(f"read -v {sector * SECTOR_SIZE} {num * SECTOR_SIZE}") + # Each row is 16 bytes long, and we are writing `num` sectors + rows = num * SECTOR_SIZE // 16 + output_rows = output.split("\n")[:rows] + + hex_content = "".join( + [(row.split(": ")[1]).split(" ")[0] for row in output_rows] + ) + bytes_content = bytes.fromhex(hex_content) + + self.assertEqual(len(bytes_content), num * SECTOR_SIZE) + + return bytes_content + + def write_sectors(self, sector: int, data: bytes): + """ + Write `data` to the `disk` starting from `sector`. + This uses `QemuIoInteractive` to write the data into the disk. + """ + + self.assertGreater(len(data), 0) + self.assertEqual(len(data) % SECTOR_SIZE, 0) + + temp_file = os.path.join(iotests.test_dir, "temp.bin") + with open(temp_file, "wb") as f: + f.write(data) + + self.qio.cmd(f"write -s {temp_file} {sector * SECTOR_SIZE} {len(data)}") + + os.remove(temp_file) + + def init_fat16(self): + mbr = MBR(self.read_sectors(0)) + return Fat16( + mbr.partition_table[0]["start_lba"], + mbr.partition_table[0]["size"], + self.read_sectors, + self.write_sectors, + ) + + # Tests + + def test_fat_filesystem(self): + """ + Test that vvfat produce a valid FAT16 and MBR sectors + """ + mbr = MBR(self.read_sectors(0)) + + self.assertEqual(mbr.partition_table[0]["status"], 0x80) + self.assertEqual(mbr.partition_table[0]["type"], 6) + + fat16 = Fat16( + mbr.partition_table[0]["start_lba"], + mbr.partition_table[0]["size"], + self.read_sectors, + self.write_sectors, + ) + self.assertEqual(fat16.boot_sector.bytes_per_sector, 512) + self.assertEqual(fat16.boot_sector.volume_label, "QEMU VVFAT") + + def test_read_root_directory(self): + """ + Test the content of the root directory + """ + fat16 = self.init_fat16() + + root_dir = fat16.read_root_directory() + + self.assertEqual(len(root_dir), 13) # 12 + 1 special file + + files = { + "QEMU VVF.AT": 0, # special empty file + "FILE0.TXT": 16, + "FILE1.TXT": 16, + "FILE2.TXT": 16, + "FILE3.TXT": 16, + "FILE4.TXT": 16, + "FILE5.TXT": 16, + "FILE6.TXT": 16, + "FILE7.TXT": 16, + "FILE8.TXT": 16, + "FILE9.TXT": 16, + "LARGE1.TXT": 0x2000 * 2, + "LARGE2.TXT": 0x2000 * 3, + } + + for entry in root_dir: + self.assertIn(entry.whole_name(), files) + self.assertEqual(entry.size_bytes, files[entry.whole_name()]) + + def test_direntry_as_bytes(self): + """ + Test if we can convert Direntry back to bytes, so that we can write it back to the disk safely. + """ + fat16 = self.init_fat16() + + root_dir = fat16.read_root_directory() + first_entry_bytes = fat16.read_sectors(fat16.boot_sector.root_dir_start(), 1) + # The first entry won't be deleted, so we can compare it with the first entry in the root directory + self.assertEqual(root_dir[0].as_bytes(), first_entry_bytes[:DIRENTRY_SIZE]) + + def test_read_files(self): + """ + Test reading the content of the files + """ + fat16 = self.init_fat16() + + for i in range(10): + file = fat16.find_direntry(f"/FILE{i}.TXT") + self.assertIsNotNone(file) + self.assertEqual( + fat16.read_file(file), f"Hello, world! {i}\n".encode("ascii") + ) + + # test large files + large1 = fat16.find_direntry("/LARGE1.TXT") + with open(os.path.join(filesystem, "large1.txt"), "rb") as f: + self.assertEqual(fat16.read_file(large1), f.read()) + + large2 = fat16.find_direntry("/LARGE2.TXT") + self.assertIsNotNone(large2) + with open(os.path.join(filesystem, "large2.txt"), "rb") as f: + self.assertEqual(fat16.read_file(large2), f.read()) + + def test_write_file_same_content_direct(self): + """ + Similar to `test_write_file_in_same_content`, but we write the file directly clusters + and thus we don't go through the modification of direntry. + """ + fat16 = self.init_fat16() + + file = fat16.find_direntry("/FILE0.TXT") + self.assertIsNotNone(file) + + data = fat16.read_cluster(file.cluster) + fat16.write_cluster(file.cluster, data) + + with open(os.path.join(filesystem, "file0.txt"), "rb") as f: + self.assertEqual(fat16.read_file(file), f.read()) + + def test_write_file_in_same_content(self): + """ + Test writing the same content to the file back to it + """ + fat16 = self.init_fat16() + + file = fat16.find_direntry("/FILE0.TXT") + self.assertIsNotNone(file) + + self.assertEqual(fat16.read_file(file), b"Hello, world! 0\n") + + fat16.write_file(file, b"Hello, world! 0\n") + self.assertEqual(fat16.read_file(file), b"Hello, world! 0\n") + + with open(os.path.join(filesystem, "file0.txt"), "rb") as f: + self.assertEqual(f.read(), b"Hello, world! 0\n") + + def test_modify_content_same_clusters(self): + """ + Test modifying the content of the file without changing the number of clusters + """ + fat16 = self.init_fat16() + + file = fat16.find_direntry("/FILE0.TXT") + self.assertIsNotNone(file) + + new_content = b"Hello, world! Modified\n" + self.assertEqual(fat16.read_file(file), b"Hello, world! 0\n") + + fat16.write_file(file, new_content) + self.assertEqual(fat16.read_file(file), new_content) + + with open(os.path.join(filesystem, "file0.txt"), "rb") as f: + self.assertEqual(f.read(), new_content) + + def test_truncate_file_same_clusters_less(self): + """ + Test truncating the file without changing number of clusters + Test decreasing the file size + """ + fat16 = self.init_fat16() + + file = fat16.find_direntry("/FILE0.TXT") + self.assertIsNotNone(file) + + self.assertEqual(fat16.read_file(file), b"Hello, world! 0\n") + + fat16.truncate_file(file, 5) + new_content = fat16.read_file(file) + self.assertEqual(new_content, b"Hello") + + with open(os.path.join(filesystem, "file0.txt"), "rb") as f: + self.assertEqual(f.read(), new_content) + + def test_truncate_file_same_clusters_more(self): + """ + Test truncating the file without changing number of clusters + Test increase the file size + """ + fat16 = self.init_fat16() + + file = fat16.find_direntry("/FILE0.TXT") + self.assertIsNotNone(file) + + self.assertEqual(fat16.read_file(file), b"Hello, world! 0\n") + + fat16.truncate_file(file, 20) + new_content = fat16.read_file(file) + + # random pattern will be appended to the file, and its not always the same + self.assertEqual(new_content[:16], b"Hello, world! 0\n") + self.assertEqual(len(new_content), 20) + + with open(os.path.join(filesystem, "file0.txt"), "rb") as f: + self.assertEqual(f.read(), new_content) + + def test_write_large_file(self): + """ + Test writing a large file + """ + fat16 = self.init_fat16() + + file = fat16.find_direntry("/LARGE1.TXT") + self.assertIsNotNone(file) + + # The content of LARGE1 is A * 1KB, B * 1KB, C * 1KB, ..., P * 1KB + # Lets change it to be Z * 1KB, Y * 1KB, X * 1KB, ..., K * 1KB + # without changing the number of clusters or filesize + new_content = b"".join([bytes([0x5A - i] * 1024) for i in range(16)]) + fat16.write_file(file, new_content) + self.assertEqual(fat16.read_file(file), new_content) + + with open(os.path.join(filesystem, "large1.txt"), "rb") as f: + self.assertEqual(f.read(), new_content) + + def test_truncate_file_change_clusters_less(self): + """ + Test truncating a file by reducing the number of clusters + """ + fat16 = self.init_fat16() + + file = fat16.find_direntry("/LARGE1.TXT") + self.assertIsNotNone(file) + + fat16.truncate_file(file, 1) + self.assertEqual(fat16.read_file(file), b"A") + + with open(os.path.join(filesystem, "large1.txt"), "rb") as f: + self.assertEqual(f.read(), b"A") + + def test_write_file_change_clusters_less(self): + """ + Test truncating a file by reducing the number of clusters + """ + fat16 = self.init_fat16() + + file = fat16.find_direntry("/LARGE2.TXT") + self.assertIsNotNone(file) + + new_content = b"X" * 8 * 1024 + b"Y" * 8 * 1024 + fat16.write_file(file, new_content) + self.assertEqual(fat16.read_file(file), new_content) + + with open(os.path.join(filesystem, "large2.txt"), "rb") as f: + self.assertEqual(f.read(), new_content) + + def test_write_file_change_clusters_more(self): + """ + Test truncating a file by increasing the number of clusters + """ + fat16 = self.init_fat16() + + file = fat16.find_direntry("/LARGE2.TXT") + self.assertIsNotNone(file) + + # from 3 clusters to 4 clusters + new_content = ( + b"W" * 8 * 1024 + b"X" * 8 * 1024 + b"Y" * 8 * 1024 + b"Z" * 8 * 1024 + ) + fat16.write_file(file, new_content) + self.assertEqual(fat16.read_file(file), new_content) + + with open(os.path.join(filesystem, "large2.txt"), "rb") as f: + self.assertEqual(f.read(), new_content) + + def test_write_file_change_clusters_more_non_contiguous_2_mappings(self): + """ + Test truncating a file by increasing the number of clusters + Here we allocate the new clusters in a way that makes them non-contiguous + so that we will get 2 cluster mappings for the file + """ + fat16 = self.init_fat16() + + file = fat16.find_direntry("/LARGE1.TXT") + self.assertIsNotNone(file) + + # from 2 clusters to 3 clusters with non-contiguous allocation + fat16.truncate_file(file, 3 * 0x2000, allocate_non_continuous=True) + new_content = b"X" * 8 * 1024 + b"Y" * 8 * 1024 + b"Z" * 8 * 1024 + fat16.write_file(file, new_content) + self.assertEqual(fat16.read_file(file), new_content) + + with open(os.path.join(filesystem, "large1.txt"), "rb") as f: + self.assertEqual(f.read(), new_content) + + def test_write_file_change_clusters_more_non_contiguous_3_mappings(self): + """ + Test truncating a file by increasing the number of clusters + Here we allocate the new clusters in a way that makes them non-contiguous + so that we will get 3 cluster mappings for the file + """ + fat16 = self.init_fat16() + + file = fat16.find_direntry("/LARGE1.TXT") + self.assertIsNotNone(file) + + # from 2 clusters to 4 clusters with non-contiguous allocation + fat16.truncate_file(file, 4 * 0x2000, allocate_non_continuous=True) + new_content = ( + b"W" * 8 * 1024 + b"X" * 8 * 1024 + b"Y" * 8 * 1024 + b"Z" * 8 * 1024 + ) + fat16.write_file(file, new_content) + self.assertEqual(fat16.read_file(file), new_content) + + with open(os.path.join(filesystem, "large1.txt"), "rb") as f: + self.assertEqual(f.read(), new_content) + + def test_create_file(self): + """ + Test creating a new file + """ + fat16 = self.init_fat16() + + new_file = fat16.create_file("/NEWFILE.TXT") + + self.assertIsNotNone(new_file) + self.assertEqual(new_file.size_bytes, 0) + + new_content = b"Hello, world! New file\n" + fat16.write_file(new_file, new_content) + self.assertEqual(fat16.read_file(new_file), new_content) + + with open(os.path.join(filesystem, "newfile.txt"), "rb") as f: + self.assertEqual(f.read(), new_content) + + # TODO: support deleting files + + +if __name__ == "__main__": + # This is a specific test for vvfat driver + iotests.main(supported_fmts=["vvfat"], supported_protocols=["file"])tests/qemu-iotests/tests/vvfat.out new file +5
-0@@ -0,0 +1,5 @@ +................ +---------------------------------------------------------------------- +Ran 16 tests + +OKSignature · 1 line
2.45.1
Btw Kevin, I'm not sure if I should add myself to the MAINTAINERS file for the new files (fat16.py and vvfat) or not
Amjad
Re: [PATCH v5 5/5] iotests: Add `vvfat` tests
Am 13.06.2024 um 16:07 hat Amjad Alsharafi geschrieben:
Quoted 20 lines · Amjad Alsharafi
Quoted 8 lines
Added several tests to verify the implementation of the vvfat driver.
We needed a way to interact with it, so created a basic
fat16.pydriver that handled writing correct sectors for us.Added
vvfatto the non-generic formats, as its not a normal image format.Signed-off-by Amjad Alsharafi <[email protected]>Quoted 10 lines
--- tests/qemu-iotests/check | 2 +- tests/qemu-iotests/fat16.py | 673 +++++++++++++++++++++++++++++ tests/qemu-iotests/testenv.py | 2 +- tests/qemu-iotests/tests/vvfat | 457 ++++++++++++++++++++ tests/qemu-iotests/tests/vvfat.out | 5 + 5 files changed, 1137 insertions(+), 2 deletions(-) create mode 100644 tests/qemu-iotests/fat16.py create mode 100755 tests/qemu-iotests/tests/vvfat create mode 100755 tests/qemu-iotests/tests/vvfat.out
Quoted 2 lines
Btw Kevin, I'm not sure if I should add myself to the
MAINTAINERSfile for the new files (fat16.pyand vvfat) or not
You can if you really want to, but there is no need.
Basically if you see yourself maintaining these files for a long time instead of just contributing them now and you want to be contacted when they are changed in the future, that's when you could consider it. But the patches will still go through my or Hanna's tree and we already cover all of qemu-iotests, so we don't have to have a formal maintainership definition for these files specifically.
Kevin
Can I get review for this patch?
Thanks,
Best regards,
Amjad
Quoted 63 lines · Amjad Alsharafi
These patches fix some bugs found when modifying files in vvfat. First, there was a bug when writing to the cluster 2 or above of a file, it will copy the cluster before it instead, so, when writing to cluster=2, the content of cluster=1 will be copied into disk instead in its place.
Another issue was modifying the clusters of a file and adding new clusters, this showed 2 issues:
- If the new cluster is not immediately after the last cluster, it will cause issues when reading from this file in the future.
- Generally, the usage of info.file.offset was incorrect, and the system would crash onabort()when the file is modified and a new cluster was added.Also, added some iotests for vvfat, covering the this fix and also general behavior such as reading, writing, and creating files on the filesystem. Including tests for reading/writing the first cluster which
would pass even before this patch.v5:
- Fix a bug in reading non-contiguous clusters in vvfat for more than 2 mappings.
- Added a test for adding more clusters where they are non-contiguous and result in 3 mappings (for the above fix).
- Split PATCH 2/4 into 2 patches and a better fix for theabortissue (now in PATCH 3/5).
- Other fixes and improvements infat16.pymodule used for iotests.v4:
Applied some suggestions from Kevin Wolf <[email protected]>:
- Fixed code formatting by following the coding style inscripts/checkpatch.pl
- Reduced changes related toiotestsby settingvvfatformat as non-generic.
- Added another test to cover the fix done inPATCH 2/4andPATCH 3/4for handling reading/writing files with non-continuous clusters.v3:
Added test for creating new files in vvfat.v2:
Added iotests forvvfatdriver along with a simplefat16module to run the tests.v1:
https://patchew.org/QEMU/[email protected]/
Fix the issue of writing to the middle of the file in vvfatAmjad Alsharafi (5):
vvfat: Fix bug in writing to middle of file
vvfat: Fix usage ofinfo.file.offset
vvfat: Fix wrong checks for cluster mappings invariant
vvfat: Fix reading files with non-continuous clusters
iotests: Addvvfattestsblock/vvfat.c | 47 +- tests/qemu-iotests/check | 2 +- tests/qemu-iotests/fat16.py | 673 +++++++++++++++++++++++++++++ tests/qemu-iotests/testenv.py | 2 +- tests/qemu-iotests/tests/vvfat | 457 ++++++++++++++++++++ tests/qemu-iotests/tests/vvfat.out | 5 + 6 files changed, 1164 insertions(+), 22 deletions(-) create mode 100644 tests/qemu-iotests/fat16.py create mode 100755 tests/qemu-iotests/tests/vvfat create mode 100755 tests/qemu-iotests/tests/vvfat.outSignature · 1 line
2.45.1
Re: [PATCH v5 4/5] vvfat: Fix reading files with non-continuous clusters
In reply to Amjad AlsharafiAm 12.06.2024 um 14:43 hat Amjad Alsharafi geschrieben:
Quoted 27 lines
When reading with
read_clusterwe get themappingwithfind_mapping_for_clusterand then we callopen_filefor this mapping.
The issue appear when its the same file, but a second cluster that is not immediately after it, imagine clusters500 -> 503, this will give us 2 mappings one has the range500..501and another503..504, both point to the same file, but different offsets.When we don't open the file since the path is the same, we won't assign
s->current_mappingand thus accessing way out of bound of the file.From our example above, after
open_file(that didn't open anything) we will get the offset into the file withs->cluster_size*(cluster_num-s->current_mapping->begin), which will give us0x2000 * (504-500), which is out of bound for this mapping and will produce some issues.Signed-off-by Amjad Alsharafi <[email protected]>--- block/vvfat.c | 23 ++++++++++++++++------- 1 file changed, 16 insertions(+), 7 deletions(-)block/vvfat.c +0
-0
block/vvfat.c static int open_file(BDRVVVFATState* s,mapping_t* mapping) · line 1366
Quoted 10 lines
block/vvfat.c +3
-3@@ -1360,15 +1360,24 @@ static int open_file(BDRVVVFATState* s,mapping_t* mapping) {if (!mapping)return -1 ; +int new_path =1 ; if(!s->current_mapping || -strcmp (s->current_mapping->path,mapping->path)) { -/* open file */ - int fd = qemu_open_old(mapping->path, + s->current_mapping->info.file.offset + != mapping->info.file.offset ||
I'm wondering if this couldn't just be s->current_mapping != mapping?
block/vvfat.c static int open_file(BDRVVVFATState* s,mapping_t* mapping) · line 1367
Quoted 1 line
block/vvfat.c +1
-0+ (new_path = strcmp(s->current_mapping->path, mapping->path))) {
If both the path and the offset change, we still want to set new_path, I think. And if we didn't already have a mapping, we also need to open the file.
Actually, setting a variable inside the condition makes it kind of hard to read, so if s->current_mapping != mapping works, we can do the check only in the conditon below:
block/vvfat.c static int open_file(BDRVVVFATState* s,mapping_t* mapping) · line 1369
Quoted 1 line
block/vvfat.c +1
-0+if (new_path) {
if (!s->current_mapping ||
strcmp(s->current_mapping->path, mapping->path))
Quoted 7 lines
block/vvfat.c +2
-4+/* open file */ +int fd =qemu_open_old (mapping->path,O_RDONLY |O_BINARY |O_LARGEFILE ); -if (fd<0 ) -return -1 ; -vvfat_close_current_file (s); - s->current_fd = fd;
block/vvfat.c static int open_file(BDRVVVFATState* s,mapping_t* mapping) · line 1382
Quoted 10 lines
block/vvfat.c +8
-0+if (fd <0 ) { +return -1 ; + } +vvfat_close_current_file (s); + + s->current_fd = fd; + } +assert (s->current_fd); s->current_mapping = mapping; }
Kevin
Re: [PATCH v5 2/5] vvfat: Fix usage of `info.file.offset`
In reply to Amjad AlsharafiAm 12.06.2024 um 14:43 hat Amjad Alsharafi geschrieben:
Quoted 5 lines
The field is marked as "the offset in the file (in clusters)", but it was being used like this
cluster_size*(nums)+mapping->info.file.offset, which is incorrect.Signed-off-by Amjad Alsharafi <[email protected]>
Re: [PATCH v5 3/5] vvfat: Fix wrong checks for cluster mappings invariant
In reply to Amjad AlsharafiAm 12.06.2024 um 14:43 hat Amjad Alsharafi geschrieben:
Quoted 15 lines
How this
abortwas intended to check for was:
- if themapping->first_mapping_indexis not the same asfirst_mapping_index, which **should** happen only in one case, when we are handling the first mapping, in that casemapping->first_mapping_index == -1, in all other cases, the other mappings after the first should have the conditiontrue.
- From above, we know that this is the first mapping, so if the offset is not0, then abort, since this is an invalid state.The issue was that
first_mapping_indexis not set if we are checking from the middle, the variablefirst_mapping_indexis only set if we passed through the checkcluster_was_modifiedwith the first mapping, and in the same function call we checked the other mappings.
Quoted 8 lines
One approach is to go into the loop even if
cluster_was_modifiedis not true so that we will be able to setfirst_mapping_indexfor the first mapping, but sincefirst_mapping_indexis only used here, another approach is to just check manually for themapping->first_mapping_index != -1since we know that this is the value for the only entry whereoffset == 0(i.e. first mapping).Signed-off-by Amjad Alsharafi <[email protected]>
Re: [PATCH v5 5/5] iotests: Add `vvfat` tests
In reply to Amjad AlsharafiAm 12.06.2024 um 14:43 hat Amjad Alsharafi geschrieben:
Quoted 48 lines
Added several tests to verify the implementation of the vvfat driver.
We needed a way to interact with it, so created a basic
fat16.pydriver that handled writing correct sectors for us.Added
vvfatto the non-generic formats, as its not a normal image format.Signed-off-by Amjad Alsharafi <[email protected]>tests/qemu-iotests/fat16.py new file +39
-0+ def truncate_file( + self, + entry: FatDirectoryEntry, + new_size: int, + allocate_non_continuous: bool = False, + ): + """ + Truncate the file at the given path to the new size. + """ + if entry is None: + return Exception("entry is None") + if entry.attributes & 0x10 != 0: + raise Exception(f"{entry.whole_name()} is a directory") + + def clusters_from_size(size: int): + return ( + size + self.boot_sector.cluster_bytes() - 1 + ) // self.boot_sector.cluster_bytes() + + # First, allocate new FATs if we need to + required_clusters = clusters_from_size(new_size) + current_clusters = clusters_from_size(entry.size_bytes) + + affected_clusters = set() + + # Keep at least one cluster, easier to manage this way + if required_clusters == 0: + required_clusters = 1 + if current_clusters == 0: + current_clusters = 1 + + if required_clusters > current_clusters: + # Allocate new clusters + cluster = entry.cluster + to_add = required_clusters + for _ in range(current_clusters - 1): + to_add -= 1 + cluster = self.next_cluster(cluster) + assert required_clusters > 0, "No new clusters to allocate"
tests/qemu-iotests/fat16.py line 551
Quoted 10 lines
tests/qemu-iotests/fat16.py new file +10
-0+ assert cluster is not None, "Cluster is None" + assert ( + self.next_cluster(cluster) is None + ), "Cluster is not the last cluster" + + # Allocate new clusters + for _ in range(to_add - 1): + new_cluster = self.next_free_cluster() + if allocate_non_continuous: + new_cluster = self.next_free_cluster_non_continuous()
The normal self.next_free_cluster() could be in an else branch. No reason to search for a free cluster when you immediately overwrite it anyway.
Quoted 32 lines
tests/qemu-iotests/fat16.py new file +32
-0+ self.write_fat_entry(cluster, new_cluster) + self.write_fat_entry(new_cluster, 0xFFFF) + cluster = new_cluster + + elif required_clusters < current_clusters: + # Truncate the file + cluster = entry.cluster + for _ in range(required_clusters - 1): + cluster = self.next_cluster(cluster) + assert cluster is not None, "Cluster is None" + + next_cluster = self.next_cluster(cluster) + # mark last as EOF + self.write_fat_entry(cluster, 0xFFFF) + # free the rest + while next_cluster is not None: + cluster = next_cluster + next_cluster = self.next_cluster(next_cluster) + self.write_fat_entry(cluster, 0) + + self.flush_fats() + + # verify number of clusters + cluster = entry.cluster + count = 0 + while cluster is not None: + count += 1 + affected_clusters.add(cluster) + cluster = self.next_cluster(cluster) + assert ( + count == required_clusters + ), f"Expected {required_clusters} clusters, got {count}"
tests/qemu-iotests/fat16.py line 593
Quoted 10 lines
tests/qemu-iotests/fat16.py new file +10
-0+ + # update the size + entry.size_bytes = new_size + self.update_direntry(entry) + + # trigger every affected cluster + for cluster in affected_clusters: + first_sector = self.boot_sector.first_sector_of_cluster(cluster) + first_sector_data = self.read_sectors(first_sector, 1) + self.write_sectors(first_sector, first_sector_data)
Other than this, the patch looks good to me and we seem to test all the cases that are fixed by the previous patches.
Kevin
Re: [PATCH v5 4/5] vvfat: Fix reading files with non-continuous clusters
In reply to Kevin WolfQuoted 32 lines · Kevin Wolf
Am 12.06.2024 um 14:43 hat Amjad Alsharafi geschrieben:
Quoted 31 lines
When reading with
read_clusterwe get themappingwithfind_mapping_for_clusterand then we callopen_filefor this mapping.
The issue appear when its the same file, but a second cluster that is not immediately after it, imagine clusters500 -> 503, this will give us 2 mappings one has the range500..501and another503..504, both point to the same file, but different offsets.When we don't open the file since the path is the same, we won't assign
s->current_mappingand thus accessing way out of bound of the file.From our example above, after
open_file(that didn't open anything) we will get the offset into the file withs->cluster_size*(cluster_num-s->current_mapping->begin), which will give us0x2000 * (504-500), which is out of bound for this mapping and will produce some issues.Signed-off-by Amjad Alsharafi <[email protected]>--- block/vvfat.c | 23 ++++++++++++++++------- 1 file changed, 16 insertions(+), 7 deletions(-)block/vvfat.c +1
-0@@ -1360,15 +1360,24 @@ static int open_file(BDRVVVFATState* s,mapping_t* mapping) {if (!mapping)return -1 ; +int new_path =1 ;
Quoted 8 lines
block/vvfat.c static int open_file(BDRVVVFATState* s,mapping_t* mapping) · line 1366
Quoted 6 lines
block/vvfat.c +2
-3if(!s->current_mapping || -strcmp (s->current_mapping->path,mapping->path)) { -/* open file */ - int fd = qemu_open_old(mapping->path, + s->current_mapping->info.file.offset + != mapping->info.file.offset ||I'm wondering if this couldn't just be
s->current_mapping!= mapping?
Actually, you are totally right. Not sure what made me go for this.
I tried also to test with only checking if the path changed, but it fails on some tests. So the offset is important.
For that reason, checking just the mapping ptr is better since we won't have 2 mappings with same file and offset.
I'll then use this change. Thanks
Quoted 36 lines
block/vvfat.c static int open_file(BDRVVVFATState* s,mapping_t* mapping) · line 1367
Quoted 2 lines
block/vvfat.c +1
-0+ (new_path = strcmp(s->current_mapping->path, mapping->path))) {If both the path and the offset change, we still want to set
new_path, I think. And if we didn't already have a mapping, we also need to open the file.Actually, setting a variable inside the condition makes it kind of hard to read, so if
s->current_mapping!= mapping works, we can do the check only in the conditon below:block/vvfat.c static int open_file(BDRVVVFATState* s,mapping_t* mapping) · line 1369
Quoted 1 line
block/vvfat.c +1
-0+if (new_path) {if (!s->current_mapping ||
strcmp(s->current_mapping->path, mapping->path))Quoted 7 lines
block/vvfat.c +2
-4+/* open file */ +int fd =qemu_open_old (mapping->path,O_RDONLY |O_BINARY |O_LARGEFILE ); -if (fd<0 ) -return -1 ; -vvfat_close_current_file (s); - s->current_fd = fd;block/vvfat.c static int open_file(BDRVVVFATState* s,mapping_t* mapping) · line 1382
Quoted 10 lines
block/vvfat.c +8
-0+if (fd <0 ) { +return -1 ; + } +vvfat_close_current_file (s); + + s->current_fd = fd; + } +assert (s->current_fd); s->current_mapping = mapping; }Kevin
Re: [PATCH v5 4/5] vvfat: Fix reading files with non-continuous clusters
Quoted 45 lines · Amjad Alsharafi
Quoted 42 lines · Kevin Wolf
Am 12.06.2024 um 14:43 hat Amjad Alsharafi geschrieben:
Quoted 8 lines
When reading with
read_clusterwe get themappingwithfind_mapping_for_clusterand then we callopen_filefor this mapping.
The issue appear when its the same file, but a second cluster that is not immediately after it, imagine clusters500 -> 503, this will give us 2 mappings one has the range500..501and another503..504, both point to the same file, but different offsets.Quoted 4 lines
When we don't open the file since the path is the same, we won't assign
s->current_mappingand thus accessing way out of bound of the file.From our example above, after
open_file(that didn't openanything) we
Quoted 3 lines
will get the offset into the file with
s->cluster_size*(cluster_num-s->current_mapping->begin), which will give us0x2000 * (504-500), which is out of bound for thismapping and
block/vvfat.c static int open_file(BDRVVVFATState*
Quoted 12 lines
will produce some issues.
Signed-off-by Amjad Alsharafi <[email protected]>--- block/vvfat.c | 23 ++++++++++++++++------- 1 file changed, 16 insertions(+), 7 deletions(-)block/vvfat.c +0
-0@@ -1360,15 +1360,24 @@ static int open_file(BDRVVVFATState*s,mapping_t* mapping)
block/vvfat.c static int open_file(BDRVVVFATState* s,mapping_t* mapping) · line 1366
Quoted 10 lines
block/vvfat.c +3
-3{if (!mapping)return -1 ; +int new_path =1 ; if(!s->current_mapping || -strcmp (s->current_mapping->path,mapping->path)) { -/* open file */ - int fd = qemu_open_old(mapping->path, + s->current_mapping->info.file.offset + != mapping->info.file.offset ||Quoted 1 line
I'm wondering if this couldn't just be
s->current_mapping!= mapping?
Quoted 8 lines
Actually, you are totally right. Not sure what made me go for this.
I tried also to test with only checking if the path changed, but it fails on some tests. So the offset is important.
For that reason, checking just the mapping ptr is better since we won't have 2 mappings with same file and offset.I'll then use this change. Thanks
Should I send a new patch? since most commits are reviewed now
Quoted 40 lines
Quoted 39 lines
block/vvfat.c static int open_file(BDRVVVFATState* · line 1367
Quoted 3 lines
block/vvfat.c +1
-0+ (new_path = strcmp(s->current_mapping->path,
mapping->path))) {If both the path and the offset change, we still want to set
new_path, I
think. And if we didn't already have a mapping, we also need to open the file.Actually, setting a variable inside the condition makes it kind of hard to read, so if
s->current_mapping!= mapping works, we can do the check only in the conditon below:block/vvfat.c static int open_file(BDRVVVFATState* s,mapping_t* mapping) · line 1369
Quoted 1 line
block/vvfat.c +1
-0+if (new_path) {if (!s->current_mapping ||
strcmp(s->current_mapping->path, mapping->path))Quoted 7 lines
block/vvfat.c +2
-4+/* open file */ +int fd =qemu_open_old (mapping->path,O_RDONLY |O_BINARY |O_LARGEFILE ); -if (fd<0 ) -return -1 ; -vvfat_close_current_file (s); - s->current_fd = fd;block/vvfat.c static int open_file(BDRVVVFATState* s,mapping_t* mapping) · line 1382
Quoted 10 lines
block/vvfat.c +8
-0+if (fd <0 ) { +return -1 ; + } +vvfat_close_current_file (s); + + s->current_fd = fd; + } +assert (s->current_fd); s->current_mapping = mapping; }Kevin
Re: [PATCH v5 4/5] vvfat: Fix reading files with non-continuous clusters
Am 19.07.2024 um 02:29 hat Amjad Alsharafi geschrieben:
Quoted 51 lines · Amjad Alsharafi
Quoted 48 lines · Kevin Wolf
Quoted 42 lines
Am 12.06.2024 um 14:43 hat Amjad Alsharafi geschrieben:
Quoted 8 lines
When reading with
read_clusterwe get themappingwithfind_mapping_for_clusterand then we callopen_filefor this mapping.
The issue appear when its the same file, but a second cluster that is not immediately after it, imagine clusters500 -> 503, this will give us 2 mappings one has the range500..501and another503..504, both point to the same file, but different offsets.Quoted 4 lines
When we don't open the file since the path is the same, we won't assign
s->current_mappingand thus accessing way out of bound of the file.From our example above, after
open_file(that didn't openanything) we
Quoted 3 lines
will get the offset into the file with
s->cluster_size*(cluster_num-s->current_mapping->begin), which will give us0x2000 * (504-500), which is out of bound for thismapping and
block/vvfat.c static int open_file(BDRVVVFATState*
Quoted 12 lines
will produce some issues.
Signed-off-by Amjad Alsharafi <[email protected]>--- block/vvfat.c | 23 ++++++++++++++++------- 1 file changed, 16 insertions(+), 7 deletions(-)block/vvfat.c +0
-0@@ -1360,15 +1360,24 @@ static int open_file(BDRVVVFATState*s,mapping_t* mapping)
block/vvfat.c static int open_file(BDRVVVFATState* s,mapping_t* mapping) · line 1366
Quoted 10 lines
block/vvfat.c +3
-3{if (!mapping)return -1 ; +int new_path =1 ; if(!s->current_mapping || -strcmp (s->current_mapping->path,mapping->path)) { -/* open file */ - int fd = qemu_open_old(mapping->path, + s->current_mapping->info.file.offset + != mapping->info.file.offset ||Quoted 1 line
I'm wondering if this couldn't just be
s->current_mapping!= mapping?Actually, you are totally right. Not sure what made me go for this.
Quoted 8 lines
Quoted 6 lines
I tried also to test with only checking if the path changed, but it fails on some tests. So the offset is important.
For that reason, checking just the mapping ptr is better since we won't have 2 mappings with same file and offset.I'll then use this change. Thanks
Should I send a new patch? since most commits are reviewed now
Yes, please do. I think I reviewed the whole series.
Kevin
Quoted 41 lines
Quoted 40 lines
Quoted 39 lines
block/vvfat.c static int open_file(BDRVVVFATState* · line 1367
Quoted 3 lines
block/vvfat.c +1
-0+ (new_path = strcmp(s->current_mapping->path,
mapping->path))) {If both the path and the offset change, we still want to set
new_path, I
think. And if we didn't already have a mapping, we also need to open the file.Actually, setting a variable inside the condition makes it kind of hard to read, so if
s->current_mapping!= mapping works, we can do the check only in the conditon below:block/vvfat.c static int open_file(BDRVVVFATState* s,mapping_t* mapping) · line 1369
Quoted 1 line
block/vvfat.c +1
-0+if (new_path) {if (!s->current_mapping ||
strcmp(s->current_mapping->path, mapping->path))Quoted 7 lines
block/vvfat.c +2
-4+/* open file */ +int fd =qemu_open_old (mapping->path,O_RDONLY |O_BINARY |O_LARGEFILE ); -if (fd<0 ) -return -1 ; -vvfat_close_current_file (s); - s->current_fd = fd;block/vvfat.c static int open_file(BDRVVVFATState* s,mapping_t* mapping) · line 1382
Quoted 10 lines
block/vvfat.c +8
-0+if (fd <0 ) { +return -1 ; + } +vvfat_close_current_file (s); + + s->current_fd = fd; + } +assert (s->current_fd); s->current_mapping = mapping; }Kevin
Re: [PATCH v5 1/5] vvfat: Fix bug in writing to middle of file
In reply to Amjad AlsharafiQuoted 7 lines · Amjad Alsharafi
Before this commit, the behavior when calling
commit_one_filefor example withoffset=0x2000(second cluster), what will happen is that we won't fetch the next cluster from the fat, and instead use the first cluster for the read operation.This is due to off-by-one error here, where
i=0x2000 !< offset=0x2000, thus not fetching the next cluster.
This smells like a -stable material, despite the fact vvfat is generally unreliable. I'm picking this up for 7.2.x and 9.0.x.
Thanks,
/mjt
Signature · 4 lines
GPG Key transition (from rsa2048 to rsa4096) since 2024-04-24. New key: rsa4096/61AD3D98ECDF2C8E 9D8B E14E 3F2A 9DD7 9199 28F1 61AD 3D98 ECDF 2C8E Old key: rsa2048/457CE0A0804465C5 6EE1 95D1 886E 8FFB 810D 4324 457C E0A0 8044 65C5 Transition statement: http://www.corpit.ru/mjt/gpg-transition-2024.txt
Quoted 17 lines · Amjad Alsharafi
These patches fix some bugs found when modifying files in vvfat. First, there was a bug when writing to the cluster 2 or above of a file, it will copy the cluster before it instead, so, when writing to cluster=2, the content of cluster=1 will be copied into disk instead in its place.
Another issue was modifying the clusters of a file and adding new clusters, this showed 2 issues:
- If the new cluster is not immediately after the last cluster, it will cause issues when reading from this file in the future.
- Generally, the usage of info.file.offset was incorrect, and the system would crash onabort()when the file is modified and a new cluster was added.Also, added some iotests for vvfat, covering the this fix and also general behavior such as reading, writing, and creating files on the filesystem. Including tests for reading/writing the first cluster which
would pass even before this patch.
...
Quoted 6 lines
Amjad Alsharafi (5):
vvfat: Fix bug in writing to middle of file
vvfat: Fix usage ofinfo.file.offset
vvfat: Fix wrong checks for cluster mappings invariant
vvfat: Fix reading files with non-continuous clusters
iotests: Addvvfattests
Actually, maybe the whole series is a good candidate for -stable, not just the first fix. What do you think?
Thanks,
/mjt
Signature · 4 lines
GPG Key transition (from rsa2048 to rsa4096) since 2024-04-24. New key: rsa4096/61AD3D98ECDF2C8E 9D8B E14E 3F2A 9DD7 9199 28F1 61AD 3D98 ECDF 2C8E Old key: rsa2048/457CE0A0804465C5 6EE1 95D1 886E 8FFB 810D 4324 457C E0A0 8044 65C5 Transition statement: http://www.corpit.ru/mjt/gpg-transition-2024.txt
Quoted 28 lines · Michael Tokarev
Quoted 19 lines · Amjad Alsharafi
These patches fix some bugs found when modifying files in vvfat. First, there was a bug when writing to the cluster 2 or above of a file, it
will copy the cluster before it instead, so, when writing to cluster=2, the
content of cluster=1 will be copied into disk instead in its place.Another issue was modifying the clusters of a file and adding new clusters, this showed 2 issues:
- If the new cluster is not immediately after the last cluster, it will cause issues when reading from this file in the future.
- Generally, the usage of info.file.offset was incorrect, and the system would crash onabort()when the file is modified and a new cluster was added.Also, added some iotests for vvfat, covering the this fix and also general behavior such as reading, writing, and creating files on the filesystem. Including tests for reading/writing the first cluster which
would pass even before this patch....
Quoted 6 lines
Amjad Alsharafi (5):
vvfat: Fix bug in writing to middle of file
vvfat: Fix usage ofinfo.file.offset
vvfat: Fix wrong checks for cluster mappings invariant
vvfat: Fix reading files with non-continuous clusters
iotests: Addvvfattests
Quoted 7 lines
Actually, maybe the whole series is a good candidate for -stable, not just the
first fix. What do you think?Thanks,
/mjt
Hello Michael,
This actually has been reviewed and approved (last version was v6 here: https://patchew.org/QEMU/[email protected]/)
It has been merged into upstream here: https://gitlab.com/qemu-project/qemu/-/commit/6d00c6f982562222adbd0613966285792125abe5
Or do you perhaps mean something else by -stable?
Thanks,
Amjad
Quoted 10 lines
Signature · 7 lines
-- GPG Key transition (from rsa2048 to rsa4096) since 2024-04-24. New key: rsa4096/61AD3D98ECDF2C8E 9D8B E14E 3F2A 9DD7 9199 28F1 61AD 3D98 ECDF 2C8E Old key: rsa2048/457CE0A0804465C5 6EE1 95D1 886E 8FFB 810D 4324 457C E0A0 8044 65C5 Transition statement: http://www.corpit.ru/mjt/gpg-transition-2024.txt
11.08.2024 12:52, Amjad Alsharafi wrote:
Hi!
Quoted 2 lines
This actually has been reviewed and approved (last version was v6 here: https://patchew.org/QEMU/[email protected]/)
It has been merged into upstream here: https://gitlab.com/qemu-project/qemu/-/commit/6d00c6f982562222adbd0613966285792125abe5
Yes I know, this is how I spotted it - by checking which patches has been applied to qemu master branch.
Quoted 1 line
Or do you perhaps mean something else by
-stable?
Please see: https://www.qemu.org/docs/master/devel/stable-process.html
Current active qemu stable series (branches) are 7.2.x (stable-7.2, staging-7.2) and 9.0.x (stable-9.0, staging-9.0).
Thanks,
/mjt
Quoted 13 lines · Michael Tokarev
11.08.2024 12:52, Amjad Alsharafi wrote:
Hi!
Quoted 3 lines
This actually has been reviewed and approved (last version was v6
here: https://patchew.org/QEMU/[email protected]/)
It has been merged into upstream here: https://gitlab.com/qemu-project/qemu/-/commit/6d00c6f982562222adbd0613966285792125abe5Yes I know, this is how I spotted it - by checking which patches has been applied to qemu master branch.
Quoted 1 line
Or do you perhaps mean something else by
-stable?
Quoted 9 lines
Please see: https://www.qemu.org/docs/master/devel/stable-process.html
Current active qemu stable series (branches) are 7.2.x (stable-7.2, staging-7.2) and 9.0.x (stable-9.0, staging-9.0).
Thanks,
/mjt
Thanks for the info Michael.
It would be great to include this patch in stable. Thank you.
Best,
Amjad
11.08.2024 13:19, Amjad Alsharafi wrote:
...
Quoted 1 line
It would be great to include this patch in
stable. Thank you.
The question here is whenever I should include whole series (5 patches) or just one? I picked up all 5 for now.
Thanks,
/mjt
Quoted 2 lines · Michael Tokarev
The question here is whenever I should include whole series (5 patches) or just one? I picked up all 5 for now.
Yeah, we should include all of them (at least the first 4 are required for the actual fixes), the last one is unit test for these fixes.
Thanks,
Amjad
Am 11.08.2024 um 09:51 hat Michael Tokarev geschrieben:
Quoted 26 lines
Quoted 17 lines · Amjad Alsharafi
These patches fix some bugs found when modifying files in vvfat. First, there was a bug when writing to the cluster 2 or above of a file, it will copy the cluster before it instead, so, when writing to cluster=2, the content of cluster=1 will be copied into disk instead in its place.
Another issue was modifying the clusters of a file and adding new clusters, this showed 2 issues:
- If the new cluster is not immediately after the last cluster, it will cause issues when reading from this file in the future.
- Generally, the usage of info.file.offset was incorrect, and the system would crash onabort()when the file is modified and a new cluster was added.Also, added some iotests for vvfat, covering the this fix and also general behavior such as reading, writing, and creating files on the filesystem. Including tests for reading/writing the first cluster which
would pass even before this patch....
Quoted 6 lines
Amjad Alsharafi (5):
vvfat: Fix bug in writing to middle of file
vvfat: Fix usage ofinfo.file.offset
vvfat: Fix wrong checks for cluster mappings invariant
vvfat: Fix reading files with non-continuous clusters
iotests: Addvvfattests
Quoted 2 lines
Actually, maybe the whole series is a good candidate for -stable, not just the first fix. What do you think?
Yes, if you consider vvfat relevant for stable at all, then I think you want to take all of the fixes, each one fixes some corruption in read-write mode. (Though as far as I can tell, read-write support is still broken even after this series.)
Kevin