Skip to contentSkip to conversation

Prepare GHES driver to support error injection

PATCH In review Mauro Carvalho Chehab 3 participants 41 messages Dec 6, 2024 – Dec 7, 2024

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

cover Prepare GHES driver to support error injection

Hi Michael,

Could you please merge this series for ACPI stuff? All patches were already reviewed by Igor. The changes against v4 are just on some patch descriptions, plus the addition of Reviewed-by. No Code changes.

Thanks,
Mauro

-

During the development of a patch series meant to allow GHESv2 error injections, it was requested a change on how CPER offsets are calculated, by adding a new BIOS pointer and reworking the GHES logic. See:

https://lore.kernel.org/qemu-devel/[email protected]/

Such change ended being a big patch, so several intermediate steps are needed, together with several cleanups and renames.

As agreed duing v10 review, I'll be splitting the big patch series into separate pull requests, starting with the cleanup series. This is the first patch set, containing only such preparation patches.

The next series will contain the shift to use offsets from the location of the HEST table, together with a migration logic to make it compatible with 9.1.

---

v5:
- some changes at patches description and added some R-B;
- no changes at the code.

v4:
- merged a patch renaming the function which calculate offsets to:
get_hw_error_offsets(), to avoid the need of such change at the next patch series;
- removed a functional change at the logic which makes
the GHES record generation more generic;
- a couple of trivial changes on patch descriptions and line break cleanups.

v3:
- improved some patch descriptions;
- some patches got reordered to better reflect the changes;
- patch v2 08/15: acpi/ghes: Prepare to support multiple sources on ghes was split on two patches. The first one is in this cleanup series:
acpi/ghes: Change ghes fill logic to work with only one source
contains just the simplification logic. The actual preparation will be moved to this series:

     https://lore.kernel.org/qemu-devel/[email protected]/

v2:
- some indentation fixes;
- some description improvements;
- fixed a badly-solved merge conflict that ended renaming a parameter.

Mauro Carvalho Chehab (31):
acpi/ghes: get rid of ACPI_HEST_SRC_ID_RESERVED acpi/ghes: simplify acpi_ghes_record_errors() code acpi/ghes: simplify the per-arch caller to build HEST table acpi/ghes: better handle source_id and notification acpi/ghes: Fix acpi_ghes_record_errors() argument acpi/ghes: Remove a duplicated out of bounds check acpi/ghes: Change the type for source_id
acpi/ghes: don't check if physical_address is not zero acpi/ghes: make the GHES record generation more generic acpi/ghes: better name GHES memory error function acpi/ghes: don't crash QEMU if ghes GED is not found acpi/ghes: rename etc/hardware_error file macros acpi/ghes: better name the offset of the hardware error firmware acpi/ghes: Prepare to support multiple sources on ghes acpi/ghes: add a firmware file with HEST address acpi/ghes: Use HEST table offsets when preparing GHES records acpi/generic_event_device: Update GHES migration to cover hest addr acpi/generic_event_device: add logic to detect if HEST addr is
available
acpi/ghes: add a notifier to notify when error data is ready acpi/generic_event_device: add an APEI error device arm/virt: Wire up a GED error device for ACPI / GHES qapi/acpi-hest: add an interface to do generic CPER error injection scripts/ghes_inject: add a script to generate GHES error inject target/arm: add an experimental mpidr arm cpu property object scripts/arm_processor_error.py: retrieve mpidr if not filled acpi/ghes: move offset calculus to a separate function DEBUG
acpi/ghes: Change ghes fill logic to work with only one source
HACK: use GPIO as source ID for virt-9.1 machines
docs: acpi_hest_ghes: fix documentation for CPER size
FIXME: acpi/ghes: properly set data record size

 MAINTAINERS                            |  10 +
 docs/specs/acpi_hest_ghes.rst          |   6 +-
 hw/acpi/Kconfig                        |   5 +
 hw/acpi/aml-build.c                    |  10 +
 hw/acpi/generic_event_device.c         |  42 +-
 hw/acpi/ghes-stub.c                    |   2 +-
 hw/acpi/ghes.c                         | 391 ++++++++++----
 hw/acpi/ghes_cper.c                    |  32 ++
 hw/acpi/ghes_cper_stub.c               |  19 +
 hw/acpi/meson.build                    |   2 +
 hw/arm/virt-acpi-build.c               |  36 +-
 hw/arm/virt.c                          |  19 +-
 hw/core/machine.c                      |   2 +
 include/hw/acpi/acpi_dev_interface.h   |   1 +
 include/hw/acpi/aml-build.h            |   2 +
 include/hw/acpi/generic_event_device.h |   1 +
 include/hw/acpi/ghes.h                 |  39 +-
 include/hw/arm/virt.h                  |   2 +
 qapi/acpi-hest.json                    |  35 ++
 qapi/meson.build                       |   1 +
 qapi/qapi-schema.json                  |   1 +
 scripts/arm_processor_error.py         | 390 ++++++++++++++
 scripts/ghes_inject.py                 |  51 ++
 scripts/qmp_helper.py                  | 702 +++++++++++++++++++++++++
 target/arm/cpu.c                       |   1 +
 target/arm/cpu.h                       |   1 +
 target/arm/helper.c                    |  10 +-
 target/arm/kvm.c                       |   2 +-
 28 files changed, 1678 insertions(+), 137 deletions(-)
 create mode 100644 hw/acpi/ghes_cper.c
 create mode 100644 hw/acpi/ghes_cper_stub.c
 create mode 100644 qapi/acpi-hest.json
 create mode 100644 scripts/arm_processor_error.py
 create mode 100755 scripts/ghes_inject.py
 create mode 100644 scripts/qmp_helper.py
Signature · 1 line
2.47.1
#1 lore raw

PATCH 1/31 acpi/ghes: get rid of ACPI_HEST_SRC_ID_RESERVED

This is just duplicating ACPI_GHES_ERROR_SOURCE_COUNT, which has a better name. So, drop the duplication.

---
 hw/acpi/ghes.c         | 7 ++-----
 include/hw/acpi/ghes.h | 3 ++-
 2 files changed, 4 insertions(+), 6 deletions(-)
hw/acpi/ghes.c +2 -5
index e9511d9b8f71..dc217694deb9 100644
@@ -34,9 +34,6 @@
 /* The max size in bytes for one error block */
 #define ACPI_GHES_MAX_RAW_DATA_LENGTH   (1 * KiB)
 
-/* Now only support ARMv8 SEA notification type error source */
-#define ACPI_GHES_ERROR_SOURCE_COUNT        1
-
 /* Generic Hardware Error Source version 2 */
 #define ACPI_GHES_SOURCE_GENERIC_ERROR_V2   10
 
@@ -396,7 +393,7 @@ int acpi_ghes_record_errors(uint8_t source_id, uint64_t physical_address)
     AcpiGedState *acpi_ged_state;
     AcpiGhesState *ags;
 
-    assert(source_id < ACPI_HEST_SRC_ID_RESERVED);
+    assert(source_id < ACPI_GHES_ERROR_SOURCE_COUNT);
 
     acpi_ged_state = ACPI_GED(object_resolve_path_type("", TYPE_ACPI_GED,
                                                        NULL));
@@ -407,7 +404,7 @@ int acpi_ghes_record_errors(uint8_t source_id, uint64_t physical_address)
 
     if (physical_address) {
 
-        if (source_id < ACPI_HEST_SRC_ID_RESERVED) {
+        if (source_id < ACPI_GHES_ERROR_SOURCE_COUNT) {
             start_addr += source_id * sizeof(uint64_t);
         }
 
include/hw/acpi/ghes.h +2 -1
index 674f6958e905..59e3b8fb24b9 100644
@@ -59,7 +59,8 @@ enum AcpiGhesNotifyType {
 enum {
     ACPI_HEST_SRC_ID_SEA = 0,
     /* future ids go here */
-    ACPI_HEST_SRC_ID_RESERVED,
+
+    ACPI_GHES_ERROR_SOURCE_COUNT
 };
 
 typedef struct AcpiGhesState {
Signature · 1 line
2.47.1
#2 lore raw

PATCH 2/31 acpi/ghes: simplify acpi_ghes_record_errors() code

In reply to Mauro Carvalho Chehab

Reduce the ident of the function and prepares it for the next changes.

No functional changes.

---
 hw/acpi/ghes.c | 56 ++++++++++++++++++++++++++------------------------
 1 file changed, 29 insertions(+), 27 deletions(-)
hw/acpi/ghes.c +29 -27
index dc217694deb9..e66f3be1502b 100644
@@ -402,40 +402,42 @@ int acpi_ghes_record_errors(uint8_t source_id, uint64_t physical_address)
 
     start_addr = le64_to_cpu(ags->ghes_addr_le);
 
-    if (physical_address) {
+    if (!physical_address) {
+        return -1;
+    }
 
-        if (source_id < ACPI_GHES_ERROR_SOURCE_COUNT) {
-            start_addr += source_id * sizeof(uint64_t);
-        }
+    if (source_id < ACPI_GHES_ERROR_SOURCE_COUNT) {
+        start_addr += source_id * sizeof(uint64_t);
+    }
 
-        cpu_physical_memory_read(start_addr, &error_block_addr,
-                                 sizeof(error_block_addr));
+    cpu_physical_memory_read(start_addr, &error_block_addr,
+                             sizeof(error_block_addr));
 
-        error_block_addr = le64_to_cpu(error_block_addr);
+    error_block_addr = le64_to_cpu(error_block_addr);
 
-        read_ack_register_addr = start_addr +
-            ACPI_GHES_ERROR_SOURCE_COUNT * sizeof(uint64_t);
+    read_ack_register_addr = start_addr +
+                             ACPI_GHES_ERROR_SOURCE_COUNT * sizeof(uint64_t);
 
-        cpu_physical_memory_read(read_ack_register_addr,
-                                 &read_ack_register, sizeof(read_ack_register));
+    cpu_physical_memory_read(read_ack_register_addr,
+                             &read_ack_register, sizeof(read_ack_register));
 
-        /* zero means OSPM does not acknowledge the error */
-        if (!read_ack_register) {
-            error_report("OSPM does not acknowledge previous error,"
-                " so can not record CPER for current error anymore");
-        } else if (error_block_addr) {
-            read_ack_register = cpu_to_le64(0);
-            /*
-             * Clear the Read Ack Register, OSPM will write it to 1 when
-             * it acknowledges this error.
-             */
-            cpu_physical_memory_write(read_ack_register_addr,
-                &read_ack_register, sizeof(uint64_t));
+    /* zero means OSPM does not acknowledge the error */
+    if (!read_ack_register) {
+        error_report("OSPM does not acknowledge previous error,"
+                     " so can not record CPER for current error anymore");
+    } else if (error_block_addr) {
+        read_ack_register = cpu_to_le64(0);
+        /*
+         * Clear the Read Ack Register, OSPM will write it to 1 when
+         * it acknowledges this error.
+         */
+        cpu_physical_memory_write(read_ack_register_addr,
+                                  &read_ack_register, sizeof(uint64_t));
 
-            ret = acpi_ghes_record_mem_error(error_block_addr,
-                                             physical_address);
-        } else
-            error_report("can not find Generic Error Status Block");
+        ret = acpi_ghes_record_mem_error(error_block_addr,
+                                         physical_address);
+    } else {
+        error_report("can not find Generic Error Status Block");
     }
 
     return ret;
Signature · 1 line
2.47.1
#3 lore raw

PATCH 3/31 acpi/ghes: simplify the per-arch caller to build HEST table

In reply to Mauro Carvalho Chehab

The GHES driver requires not only a HEST table, but also a separate firmware file to store Error Structure records. It can't do one without the other.

Simplify the caller logic for it to require one function.

No functional changes.

---

Changes from v10:
- Removed the logic which associates notification and source ID. This will be placed on a separate patch.

Changes from v8:
- Non-rename/cleanup changes merged altogether;
- source ID is now more generic, defined per guest target. That should make easier to add support for 86.

---
 hw/acpi/ghes.c           | 7 +++++--
 hw/arm/virt-acpi-build.c | 5 ++---
 include/hw/acpi/ghes.h   | 4 ++--
 3 files changed, 9 insertions(+), 7 deletions(-)
hw/acpi/ghes.c +5 -2
index e66f3be1502b..4a6c45bcb4be 100644
@@ -233,7 +233,7 @@ static int acpi_ghes_record_mem_error(uint64_t error_block_address,
  * Initialize "etc/hardware_errors" and "etc/hardware_errors_addr" fw_cfg blobs.
  * See docs/specs/acpi_hest_ghes.rst for blobs format.
  */
-void build_ghes_error_table(GArray *hardware_errors, BIOSLinker *linker)
+static void build_ghes_error_table(GArray *hardware_errors, BIOSLinker *linker)
 {
     int i, error_status_block_offset;
 
@@ -356,12 +356,15 @@ static void build_ghes_v2(GArray *table_data, int source_id, BIOSLinker *linker)
 }
 
 /* Build Hardware Error Source Table */
-void acpi_build_hest(GArray *table_data, BIOSLinker *linker,
+void acpi_build_hest(GArray *table_data, GArray *hardware_errors,
+                     BIOSLinker *linker,
                      const char *oem_id, const char *oem_table_id)
 {
     AcpiTable table = { .sig = "HEST", .rev = 1,
                         .oem_id = oem_id, .oem_table_id = oem_table_id };
 
+    build_ghes_error_table(hardware_errors, linker);
+
     acpi_table_begin(&table, table_data);
 
     /* Error Source Count */
hw/arm/virt-acpi-build.c +2 -3
index 620992c92c12..e059317b002e 100644
@@ -942,10 +942,9 @@ void virt_acpi_build(VirtMachineState *vms, AcpiBuildTables *tables)
     build_dbg2(tables_blob, tables->linker, vms);
 
     if (vms->ras) {
-        build_ghes_error_table(tables->hardware_errors, tables->linker);
         acpi_add_table(table_offsets, tables_blob);
-        acpi_build_hest(tables_blob, tables->linker, vms->oem_id,
-                        vms->oem_table_id);
+        acpi_build_hest(tables_blob, tables->hardware_errors, tables->linker,
+                        vms->oem_id, vms->oem_table_id);
     }
 
     if (ms->numa_state->num_nodes > 0) {
include/hw/acpi/ghes.h +2 -2
index 59e3b8fb24b9..20016c226d1f 100644
@@ -68,8 +68,8 @@ typedef struct AcpiGhesState {
     bool present; /* True if GHES is present at all on this board */
 } AcpiGhesState;
 
-void build_ghes_error_table(GArray *hardware_errors, BIOSLinker *linker);
-void acpi_build_hest(GArray *table_data, BIOSLinker *linker,
+void acpi_build_hest(GArray *table_data, GArray *hardware_errors,
+                     BIOSLinker *linker,
                      const char *oem_id, const char *oem_table_id);
 void acpi_ghes_add_fw_cfg(AcpiGhesState *vms, FWCfgState *s,
                           GArray *hardware_errors);
Signature · 1 line
2.47.1
#4 lore raw

PATCH 4/31 acpi/ghes: better handle source_id and notification

In reply to Mauro Carvalho Chehab

GHES has two fields that are stored on HEST error source blocks associated with notifications:

- notification type, which is a number defined at the ACPI spec containing several arch-specific synchronous and assynchronous types;
- source id, which is a HW/FW defined number, used to distinguish between different implemented sources.

There could be several sources with the same notification type, which is dependent of the way each architecture maps notifications.

Right now, build_ghes_v2() hardcodes a 1:1 mapping between such fields. Move it to two independent parameters, allowing the caller function to fill both.

---

Chenges from v10:

- Some changes got moved to the previous patch.

Changes from v8:
- Non-rename/cleanup changes merged altogether;
- source ID is now more generic, defined per guest target. That should make easier to add support for 86.

---
 hw/acpi/ghes.c | 23 +++++++++--------------
 1 file changed, 9 insertions(+), 14 deletions(-)
hw/acpi/ghes.c +9 -14
index 4a6c45bcb4be..29cd7e4d8171 100644
@@ -284,9 +284,13 @@ static void build_ghes_error_table(GArray *hardware_errors, BIOSLinker *linker)
 }
 
 /* Build Generic Hardware Error Source version 2 (GHESv2) */
-static void build_ghes_v2(GArray *table_data, int source_id, BIOSLinker *linker)
+static void build_ghes_v2(GArray *table_data,
+                          BIOSLinker *linker,
+                          enum AcpiGhesNotifyType notify,
+                          uint16_t source_id)
 {
     uint64_t address_offset;
+
     /*
      * Type:
      * Generic Hardware Error Source version 2(GHESv2 - Type 10)
@@ -316,18 +320,8 @@ static void build_ghes_v2(GArray *table_data, int source_id, BIOSLinker *linker)
         address_offset + GAS_ADDR_OFFSET, sizeof(uint64_t),
         ACPI_GHES_ERRORS_FW_CFG_FILE, source_id * sizeof(uint64_t));
 
-    switch (source_id) {
-    case ACPI_HEST_SRC_ID_SEA:
-        /*
-         * Notification Structure
-         * Now only enable ARMv8 SEA notification type
-         */
-        build_ghes_hw_error_notification(table_data, ACPI_GHES_NOTIFY_SEA);
-        break;
-    default:
-        error_report("Not support this error source");
-        abort();
-    }
+    /* Notification Structure */
+    build_ghes_hw_error_notification(table_data, notify);
 
     /* Error Status Block Length */
     build_append_int_noprefix(table_data, ACPI_GHES_MAX_RAW_DATA_LENGTH, 4);
@@ -369,7 +363,8 @@ void acpi_build_hest(GArray *table_data, GArray *hardware_errors,
 
     /* Error Source Count */
     build_append_int_noprefix(table_data, ACPI_GHES_ERROR_SOURCE_COUNT, 4);
-    build_ghes_v2(table_data, ACPI_HEST_SRC_ID_SEA, linker);
+    build_ghes_v2(table_data, linker,
+                  ACPI_GHES_NOTIFY_SEA, ACPI_HEST_SRC_ID_SEA);
 
     acpi_table_end(linker, &table);
 }
Signature · 1 line
2.47.1
#5 lore raw

PATCH 5/31 acpi/ghes: Fix acpi_ghes_record_errors() argument

In reply to Mauro Carvalho Chehab

Align the header file with the actual implementation of this function, as the first argument is source ID and not notification type.

---

Changes from v8:
- Non-rename/cleanup changes merged altogether;
- source ID is now more generic, defined per guest target. That should make easier to add support for 86.

---
 include/hw/acpi/ghes.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
include/hw/acpi/ghes.h +1 -1
index 20016c226d1f..50e3a25ea384 100644
@@ -73,7 +73,7 @@ void acpi_build_hest(GArray *table_data, GArray *hardware_errors,
                      const char *oem_id, const char *oem_table_id);
 void acpi_ghes_add_fw_cfg(AcpiGhesState *vms, FWCfgState *s,
                           GArray *hardware_errors);
-int acpi_ghes_record_errors(uint8_t notify, uint64_t error_physical_addr);
+int acpi_ghes_record_errors(uint8_t source_id, uint64_t error_physical_addr);
 
 /**
  * acpi_ghes_present: Report whether ACPI GHES table is present
Signature · 1 line
2.47.1
#6 lore raw

PATCH 6/31 acpi/ghes: Remove a duplicated out of bounds check

In reply to Mauro Carvalho Chehab

acpi_ghes_record_errors() has an assert() at the beginning to ensure that source_id will be lower than ACPI_GHES_ERROR_SOURCE_COUNT. Remove a duplicated check.

---
 hw/acpi/ghes.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)
hw/acpi/ghes.c +1 -3
index 29cd7e4d8171..5f67322bf0f2 100644
@@ -404,9 +404,7 @@ int acpi_ghes_record_errors(uint8_t source_id, uint64_t physical_address)
         return -1;
     }
 
-    if (source_id < ACPI_GHES_ERROR_SOURCE_COUNT) {
-        start_addr += source_id * sizeof(uint64_t);
-    }
+    start_addr += source_id * sizeof(uint64_t);
 
     cpu_physical_memory_read(start_addr, &error_block_addr,
                              sizeof(error_block_addr));
Signature · 1 line
2.47.1
#8 lore raw

PATCH 8/31 acpi/ghes: don't check if physical_address is not zero

In reply to Mauro Carvalho Chehab

The 'physical_address' value is a faulty page. As such, 0 is as valid as any other value.

---
 hw/acpi/ghes.c | 4 ----
 1 file changed, 4 deletions(-)
hw/acpi/ghes.c +0 -4
index edc74c38bf8a..a3dffd78b012 100644
@@ -400,10 +400,6 @@ int acpi_ghes_record_errors(uint16_t source_id, uint64_t physical_address)
 
     start_addr = le64_to_cpu(ags->ghes_addr_le);
 
-    if (!physical_address) {
-        return -1;
-    }
-
     start_addr += source_id * sizeof(uint64_t);
 
     cpu_physical_memory_read(start_addr, &error_block_addr,
Signature · 1 line
2.47.1
#7 lore raw

PATCH 7/31 acpi/ghes: Change the type for source_id

In reply to Mauro Carvalho Chehab

As described at: ACPI 6.5 spec at:

	18.3.2. ACPI Error Source

In particular at GHES/GHESv2 table:
Table 18.10 Generic Hardware Error Source Structure

HEST source ID is actually a 16-bit value.

---
 hw/acpi/ghes-stub.c    | 2 +-
 hw/acpi/ghes.c         | 2 +-
 include/hw/acpi/ghes.h | 2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)
hw/acpi/ghes-stub.c +1 -1
index c315de1802d6..2b64cbd2819a 100644
@@ -11,7 +11,7 @@
 #include "qemu/osdep.h"
 #include "hw/acpi/ghes.h"
 
-int acpi_ghes_record_errors(uint8_t source_id, uint64_t physical_address)
+int acpi_ghes_record_errors(uint16_t source_id, uint64_t physical_address)
 {
     return -1;
 }
hw/acpi/ghes.c +1 -1
index 5f67322bf0f2..edc74c38bf8a 100644
@@ -383,7 +383,7 @@ void acpi_ghes_add_fw_cfg(AcpiGhesState *ags, FWCfgState *s,
     ags->present = true;
 }
 
-int acpi_ghes_record_errors(uint8_t source_id, uint64_t physical_address)
+int acpi_ghes_record_errors(uint16_t source_id, uint64_t physical_address)
 {
     uint64_t error_block_addr, read_ack_register_addr, read_ack_register = 0;
     uint64_t start_addr;
include/hw/acpi/ghes.h +1 -1
index 50e3a25ea384..9295e46be25e 100644
@@ -73,7 +73,7 @@ void acpi_build_hest(GArray *table_data, GArray *hardware_errors,
                      const char *oem_id, const char *oem_table_id);
 void acpi_ghes_add_fw_cfg(AcpiGhesState *vms, FWCfgState *s,
                           GArray *hardware_errors);
-int acpi_ghes_record_errors(uint8_t source_id, uint64_t error_physical_addr);
+int acpi_ghes_record_errors(uint16_t source_id, uint64_t error_physical_addr);
 
 /**
  * acpi_ghes_present: Report whether ACPI GHES table is present
Signature · 1 line
2.47.1
#9 lore raw

PATCH 9/31 acpi/ghes: make the GHES record generation more generic

In reply to Mauro Carvalho Chehab

Split the code into separate functions to allow using the common CPER filling code by different error sources.

The generic code was moved to ghes_record_cper_errors(), and ghes_gen_err_data_uncorrectable_recoverable() now contains only a logic to fill the Generic Error Data part of the record, as described at:

	ACPI 6.2: 18.3.2.7.1 Generic Error Data

The remaining code to generate a memory error now belongs to acpi_ghes_record_errors() function.

A further patch will give it a better name.

---
 hw/acpi/ghes.c         | 121 ++++++++++++++++++++++++-----------------
 include/hw/acpi/ghes.h |   3 +
 2 files changed, 73 insertions(+), 51 deletions(-)
hw/acpi/ghes.c +70 -51
index a3dffd78b012..4b5332f8c667 100644
@@ -181,51 +181,24 @@ static void acpi_ghes_build_append_mem_cper(GArray *table,
     build_append_int_noprefix(table, 0, 7);
 }
 
-static int acpi_ghes_record_mem_error(uint64_t error_block_address,
-                                      uint64_t error_physical_addr)
+static void
+ghes_gen_err_data_uncorrectable_recoverable(GArray *block,
+                                            const uint8_t *section_type,
+                                            int data_length)
 {
-    GArray *block;
-
-    /* Memory Error Section Type */
-    const uint8_t uefi_cper_mem_sec[] =
-          UUID_LE(0xA5BC1114, 0x6F64, 0x4EDE, 0xB8, 0x63, 0x3E, 0x83, \
-                  0xED, 0x7C, 0x83, 0xB1);
-
     /* invalid fru id: ACPI 4.0: 17.3.2.6.1 Generic Error Data,
      * Table 17-13 Generic Error Data Entry
      */
     QemuUUID fru_id = {};
-    uint32_t data_length;
-
-    block = g_array_new(false, true /* clear */, 1);
-
-    /* This is the length if adding a new generic error data entry*/
-    data_length = ACPI_GHES_DATA_LENGTH + ACPI_GHES_MEM_CPER_LENGTH;
-    /*
-     * It should not run out of the preallocated memory if adding a new generic
-     * error data entry
-     */
-    assert((data_length + ACPI_GHES_GESB_SIZE) <=
-            ACPI_GHES_MAX_RAW_DATA_LENGTH);
 
     /* Build the new generic error status block header */
     acpi_ghes_generic_error_status(block, ACPI_GEBS_UNCORRECTABLE,
         0, 0, data_length, ACPI_CPER_SEV_RECOVERABLE);
 
     /* Build this new generic error data entry header */
-    acpi_ghes_generic_error_data(block, uefi_cper_mem_sec,
+    acpi_ghes_generic_error_data(block, section_type,
         ACPI_CPER_SEV_RECOVERABLE, 0, 0,
         ACPI_GHES_MEM_CPER_LENGTH, fru_id, 0);
-
-    /* Build the memory section CPER for above new generic error data entry */
-    acpi_ghes_build_append_mem_cper(block, error_physical_addr);
-
-    /* Write the generic error data entry into guest memory */
-    cpu_physical_memory_write(error_block_address, block->data, block->len);
-
-    g_array_free(block, true);
-
-    return 0;
 }
 
 /*
@@ -383,15 +356,18 @@ void acpi_ghes_add_fw_cfg(AcpiGhesState *ags, FWCfgState *s,
     ags->present = true;
 }
 
-int acpi_ghes_record_errors(uint16_t source_id, uint64_t physical_address)
+void ghes_record_cper_errors(const void *cper, size_t len,
+                             uint16_t source_id, Error **errp)
 {
     uint64_t error_block_addr, read_ack_register_addr, read_ack_register = 0;
     uint64_t start_addr;
-    bool ret = -1;
     AcpiGedState *acpi_ged_state;
     AcpiGhesState *ags;
 
-    assert(source_id < ACPI_GHES_ERROR_SOURCE_COUNT);
+    if (len > ACPI_GHES_MAX_RAW_DATA_LENGTH) {
+        error_setg(errp, "GHES CPER record is too big: %ld", len);
+        return;
+    }
 
     acpi_ged_state = ACPI_GED(object_resolve_path_type("", TYPE_ACPI_GED,
                                                        NULL));
@@ -406,6 +382,10 @@ int acpi_ghes_record_errors(uint16_t source_id, uint64_t physical_address)
                              sizeof(error_block_addr));
 
     error_block_addr = le64_to_cpu(error_block_addr);
+    if (!error_block_addr) {
+        error_setg(errp, "can not find Generic Error Status Block");
+        return;
+    }
 
     read_ack_register_addr = start_addr +
                              ACPI_GHES_ERROR_SOURCE_COUNT * sizeof(uint64_t);
@@ -415,24 +395,63 @@ int acpi_ghes_record_errors(uint16_t source_id, uint64_t physical_address)
 
     /* zero means OSPM does not acknowledge the error */
     if (!read_ack_register) {
-        error_report("OSPM does not acknowledge previous error,"
-                     " so can not record CPER for current error anymore");
-    } else if (error_block_addr) {
-        read_ack_register = cpu_to_le64(0);
-        /*
-         * Clear the Read Ack Register, OSPM will write it to 1 when
-         * it acknowledges this error.
-         */
-        cpu_physical_memory_write(read_ack_register_addr,
-                                  &read_ack_register, sizeof(uint64_t));
-
-        ret = acpi_ghes_record_mem_error(error_block_addr,
-                                         physical_address);
-    } else {
-        error_report("can not find Generic Error Status Block");
+        error_setg(errp,
+                   "OSPM does not acknowledge previous error,"
+                   " so can not record CPER for current error anymore");
+        return;
     }
 
-    return ret;
+    read_ack_register = cpu_to_le64(0);
+    /*
+     * Clear the Read Ack Register, OSPM will write 1 to this register when
+     * it acknowledges the error.
+     */
+    cpu_physical_memory_write(read_ack_register_addr,
+        &read_ack_register, sizeof(uint64_t));
+
+    /* Write the generic error data entry into guest memory */
+    cpu_physical_memory_write(error_block_addr, cper, len);
+
+    return;
+}
+
+int acpi_ghes_record_errors(uint16_t source_id, uint64_t physical_address)
+{
+    /* Memory Error Section Type */
+    const uint8_t guid[] =
+          UUID_LE(0xA5BC1114, 0x6F64, 0x4EDE, 0xB8, 0x63, 0x3E, 0x83, \
+                  0xED, 0x7C, 0x83, 0xB1);
+    Error *errp = NULL;
+    int data_length;
+    GArray *block;
+
+    block = g_array_new(false, true /* clear */, 1);
+
+    data_length = ACPI_GHES_DATA_LENGTH + ACPI_GHES_MEM_CPER_LENGTH;
+    /*
+     * It should not run out of the preallocated memory if adding a new generic
+     * error data entry
+     */
+    assert((data_length + ACPI_GHES_GESB_SIZE) <=
+            ACPI_GHES_MAX_RAW_DATA_LENGTH);
+
+    ghes_gen_err_data_uncorrectable_recoverable(block, guid,
+                                                data_length);
+
+    /* Build the memory section CPER for above new generic error data entry */
+    acpi_ghes_build_append_mem_cper(block, physical_address);
+
+    /* Report the error */
+    ghes_record_cper_errors(block->data, block->len, source_id, &errp);
+
+    g_array_free(block, true);
+
+    if (errp) {
+        error_report_err(errp);
+        return -1;
+    }
+
+    return 0;
 }
 
 bool acpi_ghes_present(void)
include/hw/acpi/ghes.h +3 -0
index 9295e46be25e..8859346af51a 100644
@@ -23,6 +23,7 @@
 #define ACPI_GHES_H
 
 #include "hw/acpi/bios-linker-loader.h"
+#include "qapi/error.h"
 
 /*
  * Values for Hardware Error Notification Type field
@@ -73,6 +74,8 @@ void acpi_build_hest(GArray *table_data, GArray *hardware_errors,
                      const char *oem_id, const char *oem_table_id);
 void acpi_ghes_add_fw_cfg(AcpiGhesState *vms, FWCfgState *s,
                           GArray *hardware_errors);
+void ghes_record_cper_errors(const void *cper, size_t len,
+                             uint16_t source_id, Error **errp);
 int acpi_ghes_record_errors(uint16_t source_id, uint64_t error_physical_addr);
 
 /**
Signature · 1 line
2.47.1
#10 lore raw

PATCH 10/31 acpi/ghes: better name GHES memory error function

In reply to Mauro Carvalho Chehab

The current function used to generate GHES data is specific for memory errors. Give a better name for it, as we now have a generic function as well.

---
 hw/acpi/ghes-stub.c    | 2 +-
 hw/acpi/ghes.c         | 2 +-
 include/hw/acpi/ghes.h | 4 ++--
 target/arm/kvm.c       | 2 +-
 4 files changed, 5 insertions(+), 5 deletions(-)
hw/acpi/ghes-stub.c +1 -1
index 2b64cbd2819a..7cec1812dad9 100644
@@ -11,7 +11,7 @@
 #include "qemu/osdep.h"
 #include "hw/acpi/ghes.h"
 
-int acpi_ghes_record_errors(uint16_t source_id, uint64_t physical_address)
+int acpi_ghes_memory_errors(uint16_t source_id, uint64_t physical_address)
 {
     return -1;
 }
hw/acpi/ghes.c +1 -1
index 4b5332f8c667..414a4a1ee00e 100644
@@ -415,7 +415,7 @@ void ghes_record_cper_errors(const void *cper, size_t len,
     return;
 }
 
-int acpi_ghes_record_errors(uint16_t source_id, uint64_t physical_address)
+int acpi_ghes_memory_errors(uint16_t source_id, uint64_t physical_address)
 {
     /* Memory Error Section Type */
     const uint8_t guid[] =
include/hw/acpi/ghes.h +2 -2
index 8859346af51a..21666a4bcc8b 100644
@@ -74,15 +74,15 @@ void acpi_build_hest(GArray *table_data, GArray *hardware_errors,
                      const char *oem_id, const char *oem_table_id);
 void acpi_ghes_add_fw_cfg(AcpiGhesState *vms, FWCfgState *s,
                           GArray *hardware_errors);
+int acpi_ghes_memory_errors(uint16_t source_id, uint64_t error_physical_addr);
 void ghes_record_cper_errors(const void *cper, size_t len,
                              uint16_t source_id, Error **errp);
-int acpi_ghes_record_errors(uint16_t source_id, uint64_t error_physical_addr);
 
 /**
  * acpi_ghes_present: Report whether ACPI GHES table is present
  *
  * Returns: true if the system has an ACPI GHES table and it is
- * safe to call acpi_ghes_record_errors() to record a memory error.
+ * safe to call acpi_ghes_memory_errors() to record a memory error.
  */
 bool acpi_ghes_present(void);
 #endif
target/arm/kvm.c +1 -1
index 7b6812c0de2e..b4260467f8b9 100644
@@ -2387,7 +2387,7 @@ void kvm_arch_on_sigbus_vcpu(CPUState *c, int code, void *addr)
              */
             if (code == BUS_MCEERR_AR) {
                 kvm_cpu_synchronize_state(c);
-                if (!acpi_ghes_record_errors(ACPI_HEST_SRC_ID_SEA, paddr)) {
+                if (!acpi_ghes_memory_errors(ACPI_HEST_SRC_ID_SEA, paddr)) {
                     kvm_inject_arm_sea(c);
                 } else {
                     error_report("failed to record the error");
Signature · 1 line
2.47.1
#11 lore raw

PATCH 11/31 acpi/ghes: don't crash QEMU if ghes GED is not found

In reply to Mauro Carvalho Chehab

Make error handling within ghes_record_cper_errors() consistent, i.e. instead abort just print a error in case ghes GED is not found.

---
 hw/acpi/ghes.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)
hw/acpi/ghes.c +4 -1
index 414a4a1ee00e..2df5ddf68a13 100644
@@ -371,7 +371,10 @@ void ghes_record_cper_errors(const void *cper, size_t len,
 
     acpi_ged_state = ACPI_GED(object_resolve_path_type("", TYPE_ACPI_GED,
                                                        NULL));
-    g_assert(acpi_ged_state);
+    if (!acpi_ged_state) {
+        error_setg(errp, "Can't find ACPI_GED object");
+        return;
+    }
     ags = &acpi_ged_state->ghes_state;
 
     start_addr = le64_to_cpu(ags->ghes_addr_le);
Signature · 1 line
2.47.1
#12 lore raw

PATCH 12/31 acpi/ghes: rename etc/hardware_error file macros

In reply to Mauro Carvalho Chehab

Now that we have also have a file to store HEST data location, which is part of GHES, better name the file where CPER records are stored.

No functional changes.

---
 hw/acpi/ghes.c | 38 +++++++++++++++++++++++---------------
 1 file changed, 23 insertions(+), 15 deletions(-)
hw/acpi/ghes.c +23 -15
index 2df5ddf68a13..52c2b69d3664 100644
@@ -28,8 +28,8 @@
 #include "hw/nvram/fw_cfg.h"
 #include "qemu/uuid.h"
 
-#define ACPI_GHES_ERRORS_FW_CFG_FILE        "etc/hardware_errors"
-#define ACPI_GHES_DATA_ADDR_FW_CFG_FILE     "etc/hardware_errors_addr"
+#define ACPI_HW_ERROR_FW_CFG_FILE           "etc/hardware_errors"
+#define ACPI_HW_ERROR_ADDR_FW_CFG_FILE      "etc/hardware_errors_addr"
 
 /* The max size in bytes for one error block */
 #define ACPI_GHES_MAX_RAW_DATA_LENGTH   (1 * KiB)
@@ -234,7 +234,7 @@ static void build_ghes_error_table(GArray *hardware_errors, BIOSLinker *linker)
         ACPI_GHES_MAX_RAW_DATA_LENGTH * ACPI_GHES_ERROR_SOURCE_COUNT);
 
     /* Tell guest firmware to place hardware_errors blob into RAM */
-    bios_linker_loader_alloc(linker, ACPI_GHES_ERRORS_FW_CFG_FILE,
+    bios_linker_loader_alloc(linker, ACPI_HW_ERROR_FW_CFG_FILE,
                              hardware_errors, sizeof(uint64_t), false);
 
     for (i = 0; i < ACPI_GHES_ERROR_SOURCE_COUNT; i++) {
@@ -243,17 +243,21 @@ static void build_ghes_error_table(GArray *hardware_errors, BIOSLinker *linker)
          * corresponding "Generic Error Status Block"
          */
         bios_linker_loader_add_pointer(linker,
-            ACPI_GHES_ERRORS_FW_CFG_FILE, sizeof(uint64_t) * i,
-            sizeof(uint64_t), ACPI_GHES_ERRORS_FW_CFG_FILE,
-            error_status_block_offset + i * ACPI_GHES_MAX_RAW_DATA_LENGTH);
+                                       ACPI_HW_ERROR_FW_CFG_FILE,
+                                       sizeof(uint64_t) * i,
+                                       sizeof(uint64_t),
+                                       ACPI_HW_ERROR_FW_CFG_FILE,
+                                       error_status_block_offset +
+                                       i * ACPI_GHES_MAX_RAW_DATA_LENGTH);
     }
 
     /*
      * tell firmware to write hardware_errors GPA into
      * hardware_errors_addr fw_cfg, once the former has been initialized.
      */
-    bios_linker_loader_write_pointer(linker, ACPI_GHES_DATA_ADDR_FW_CFG_FILE,
-        0, sizeof(uint64_t), ACPI_GHES_ERRORS_FW_CFG_FILE, 0);
+    bios_linker_loader_write_pointer(linker, ACPI_HW_ERROR_ADDR_FW_CFG_FILE, 0,
+                                     sizeof(uint64_t),
+                                     ACPI_HW_ERROR_FW_CFG_FILE, 0);
 }
 
 /* Build Generic Hardware Error Source version 2 (GHESv2) */
@@ -290,8 +294,10 @@ static void build_ghes_v2(GArray *table_data,
     build_append_gas(table_data, AML_AS_SYSTEM_MEMORY, 0x40, 0,
                      4 /* QWord access */, 0);
     bios_linker_loader_add_pointer(linker, ACPI_BUILD_TABLE_FILE,
-        address_offset + GAS_ADDR_OFFSET, sizeof(uint64_t),
-        ACPI_GHES_ERRORS_FW_CFG_FILE, source_id * sizeof(uint64_t));
+                                   address_offset + GAS_ADDR_OFFSET,
+                                   sizeof(uint64_t),
+                                   ACPI_HW_ERROR_FW_CFG_FILE,
+                                   source_id * sizeof(uint64_t));
 
     /* Notification Structure */
     build_ghes_hw_error_notification(table_data, notify);
@@ -308,9 +314,11 @@ static void build_ghes_v2(GArray *table_data,
     build_append_gas(table_data, AML_AS_SYSTEM_MEMORY, 0x40, 0,
                      4 /* QWord access */, 0);
     bios_linker_loader_add_pointer(linker, ACPI_BUILD_TABLE_FILE,
-        address_offset + GAS_ADDR_OFFSET,
-        sizeof(uint64_t), ACPI_GHES_ERRORS_FW_CFG_FILE,
-        (ACPI_GHES_ERROR_SOURCE_COUNT + source_id) * sizeof(uint64_t));
+                                   address_offset + GAS_ADDR_OFFSET,
+                                   sizeof(uint64_t),
+                                   ACPI_HW_ERROR_FW_CFG_FILE,
+                                   (ACPI_GHES_ERROR_SOURCE_COUNT + source_id)
+                                   * sizeof(uint64_t));
 
     /*
      * Read Ack Preserve field
@@ -346,11 +354,11 @@ void acpi_ghes_add_fw_cfg(AcpiGhesState *ags, FWCfgState *s,
                           GArray *hardware_error)
 {
     /* Create a read-only fw_cfg file for GHES */
-    fw_cfg_add_file(s, ACPI_GHES_ERRORS_FW_CFG_FILE, hardware_error->data,
+    fw_cfg_add_file(s, ACPI_HW_ERROR_FW_CFG_FILE, hardware_error->data,
                     hardware_error->len);
 
     /* Create a read-write fw_cfg file for Address */
-    fw_cfg_add_file_callback(s, ACPI_GHES_DATA_ADDR_FW_CFG_FILE, NULL, NULL,
+    fw_cfg_add_file_callback(s, ACPI_HW_ERROR_ADDR_FW_CFG_FILE, NULL, NULL,
         NULL, &(ags->ghes_addr_le), sizeof(ags->ghes_addr_le), false);
 
     ags->present = true;
Signature · 1 line
2.47.1
#13 lore raw

PATCH 13/31 acpi/ghes: better name the offset of the hardware error firmware

In reply to Mauro Carvalho Chehab

The etc/hardware_errors fw_cfg file is where the HEST error source structures store registers pointed by Generic Address Structures, as defined at:

https://uefi.org/specs/ACPI/6.5/18_Platform_Error_Interfaces.html#generic-error-data-entry

and

https://uefi.org/specs/ACPI/6.5/18_Platform_Error_Interfaces.html#generic-hardware-error-source-version-2-ghesv2-structure

As the name of the firmware file is hardware_errors, better name the variable where the offset pointing to it will be stored from ghes_error_le to hw_error_le.

No functional changes.

---
 hw/acpi/generic_event_device.c | 4 ++--
 hw/acpi/ghes.c                 | 4 ++--
 include/hw/acpi/ghes.h         | 2 +-
 3 files changed, 5 insertions(+), 5 deletions(-)
hw/acpi/generic_event_device.c +2 -2
index 663d9cb09380..17baf36132a8 100644
@@ -364,7 +364,7 @@ static const VMStateDescription vmstate_ghes = {
     .version_id = 1,
     .minimum_version_id = 1,
     .fields = (const VMStateField[]) {
-        VMSTATE_UINT64(ghes_addr_le, AcpiGhesState),
+        VMSTATE_UINT64(hw_error_le, AcpiGhesState),
         VMSTATE_END_OF_LIST()
     },
 };
@@ -372,7 +372,7 @@ static const VMStateDescription vmstate_ghes = {
 static bool ghes_needed(void *opaque)
 {
     AcpiGedState *s = opaque;
-    return s->ghes_state.ghes_addr_le;
+    return s->ghes_state.hw_error_le;
 }
 
 static const VMStateDescription vmstate_ghes_state = {
hw/acpi/ghes.c +2 -2
index 52c2b69d3664..90d76b9c2d8c 100644
@@ -359,7 +359,7 @@ void acpi_ghes_add_fw_cfg(AcpiGhesState *ags, FWCfgState *s,
 
     /* Create a read-write fw_cfg file for Address */
     fw_cfg_add_file_callback(s, ACPI_HW_ERROR_ADDR_FW_CFG_FILE, NULL, NULL,
-        NULL, &(ags->ghes_addr_le), sizeof(ags->ghes_addr_le), false);
+        NULL, &(ags->hw_error_le), sizeof(ags->hw_error_le), false);
 
     ags->present = true;
 }
@@ -385,7 +385,7 @@ void ghes_record_cper_errors(const void *cper, size_t len,
     }
     ags = &acpi_ged_state->ghes_state;
 
-    start_addr = le64_to_cpu(ags->ghes_addr_le);
+    start_addr = le64_to_cpu(ags->hw_error_le);
 
     start_addr += source_id * sizeof(uint64_t);
 
include/hw/acpi/ghes.h +1 -1
index 21666a4bcc8b..39619a2457cb 100644
@@ -65,7 +65,7 @@ enum {
 };
 
 typedef struct AcpiGhesState {
-    uint64_t ghes_addr_le;
+    uint64_t hw_error_le;
     bool present; /* True if GHES is present at all on this board */
 } AcpiGhesState;
 
Signature · 1 line
2.47.1
#14 lore raw

PATCH 14/31 acpi/ghes: Prepare to support multiple sources on ghes

In reply to Mauro Carvalho Chehab

The current code is actually dependent on having just one error structure with a single source.

As the number of sources should be arch-dependent, as it will depend on what kind of synchronous/assynchronous notifications will exist, change the logic to dynamically build the table.

Yet, for a proper support, we need to get the number of sources by reading the number from the HEST table. However, bios currently doesn't store a pointer to it.

For now just change the logic at table build time, while enforcing that it will behave like before with a single source ID.

A future patch will add a HEST table bios pointer and change the logic at acpi_ghes_record_errors() to dynamically use the new size.

---
 hw/acpi/ghes.c           | 43 ++++++++++++++++++++++++++--------------
 hw/arm/virt-acpi-build.c |  5 +++++
 include/hw/acpi/ghes.h   | 21 +++++++++++++-------
 3 files changed, 47 insertions(+), 22 deletions(-)
hw/acpi/ghes.c +28 -15
index 5efa50413af3..b77e5c9d1b19 100644
@@ -206,17 +206,26 @@ ghes_gen_err_data_uncorrectable_recoverable(GArray *block,
  * Initialize "etc/hardware_errors" and "etc/hardware_errors_addr" fw_cfg blobs.
  * See docs/specs/acpi_hest_ghes.rst for blobs format.
  */
-static void build_ghes_error_table(GArray *hardware_errors, BIOSLinker *linker)
+static void build_ghes_error_table(GArray *hardware_errors, BIOSLinker *linker,
+                                   int num_sources)
 {
     int i, error_status_block_offset;
 
+    /*
+     * TODO: Current version supports only one source.
+     * A further patch will drop this check, after adding a proper migration
+     * code, as, for the code to work, we need to store a bios pointer to the
+     * HEST table.
+     */
+    assert(num_sources == 1);
+
     /* Build error_block_address */
-    for (i = 0; i < ACPI_GHES_ERROR_SOURCE_COUNT; i++) {
+    for (i = 0; i < num_sources; i++) {
         build_append_int_noprefix(hardware_errors, 0, sizeof(uint64_t));
     }
 
     /* Build read_ack_register */
-    for (i = 0; i < ACPI_GHES_ERROR_SOURCE_COUNT; i++) {
+    for (i = 0; i < num_sources; i++) {
         /*
          * Initialize the value of read_ack_register to 1, so GHES can be
          * writable after (re)boot.
@@ -231,13 +240,13 @@ static void build_ghes_error_table(GArray *hardware_errors, BIOSLinker *linker)
 
     /* Reserve space for Error Status Data Block */
     acpi_data_push(hardware_errors,
-        ACPI_GHES_MAX_RAW_DATA_LENGTH * ACPI_GHES_ERROR_SOURCE_COUNT);
+        ACPI_GHES_MAX_RAW_DATA_LENGTH * num_sources);
 
     /* Tell guest firmware to place hardware_errors blob into RAM */
     bios_linker_loader_alloc(linker, ACPI_HW_ERROR_FW_CFG_FILE,
                              hardware_errors, sizeof(uint64_t), false);
 
-    for (i = 0; i < ACPI_GHES_ERROR_SOURCE_COUNT; i++) {
+    for (i = 0; i < num_sources; i++) {
         /*
          * Tell firmware to patch error_block_address entries to point to
          * corresponding "Generic Error Status Block"
@@ -263,10 +272,12 @@ static void build_ghes_error_table(GArray *hardware_errors, BIOSLinker *linker)
 /* Build Generic Hardware Error Source version 2 (GHESv2) */
 static void build_ghes_v2(GArray *table_data,
                           BIOSLinker *linker,
-                          enum AcpiGhesNotifyType notify,
-                          uint16_t source_id)
+                          const AcpiNotificationSourceId *notif_src,
+                          uint16_t index, int num_sources)
 {
     uint64_t address_offset;
+    const uint16_t notify = notif_src->notify;
+    const uint16_t source_id = notif_src->source_id;
 
     /*
      * Type:
@@ -297,7 +308,7 @@ static void build_ghes_v2(GArray *table_data,
                                    address_offset + GAS_ADDR_OFFSET,
                                    sizeof(uint64_t),
                                    ACPI_HW_ERROR_FW_CFG_FILE,
-                                   source_id * sizeof(uint64_t));
+                                   index * sizeof(uint64_t));
 
     /* Notification Structure */
     build_ghes_hw_error_notification(table_data, notify);
@@ -317,8 +328,7 @@ static void build_ghes_v2(GArray *table_data,
                                    address_offset + GAS_ADDR_OFFSET,
                                    sizeof(uint64_t),
                                    ACPI_HW_ERROR_FW_CFG_FILE,
-                                   (ACPI_GHES_ERROR_SOURCE_COUNT + source_id)
-                                   * sizeof(uint64_t));
+                                   (num_sources + index) * sizeof(uint64_t));
 
     /*
      * Read Ack Preserve field
@@ -333,19 +343,23 @@ static void build_ghes_v2(GArray *table_data,
 /* Build Hardware Error Source Table */
 void acpi_build_hest(GArray *table_data, GArray *hardware_errors,
                      BIOSLinker *linker,
+                     const AcpiNotificationSourceId * const notif_source,
+                     int num_sources,
                      const char *oem_id, const char *oem_table_id)
 {
     AcpiTable table = { .sig = "HEST", .rev = 1,
                         .oem_id = oem_id, .oem_table_id = oem_table_id };
+    int i;
 
-    build_ghes_error_table(hardware_errors, linker);
+    build_ghes_error_table(hardware_errors, linker, num_sources);
 
     acpi_table_begin(&table, table_data);
 
     /* Error Source Count */
-    build_append_int_noprefix(table_data, ACPI_GHES_ERROR_SOURCE_COUNT, 4);
-    build_ghes_v2(table_data, linker,
-                  ACPI_GHES_NOTIFY_SEA, ACPI_HEST_SRC_ID_SEA);
+    build_append_int_noprefix(table_data, num_sources, 4);
+    for (i = 0; i < num_sources; i++) {
+        build_ghes_v2(table_data, linker, &notif_source[i], i, num_sources);
+    }
 
     acpi_table_end(linker, &table);
 }
@@ -410,7 +424,6 @@ void ghes_record_cper_errors(const void *cper, size_t len,
     }
     ags = &acpi_ged_state->ghes_state;
 
-    assert(ACPI_GHES_ERROR_SOURCE_COUNT == 1);
     get_hw_error_offsets(le64_to_cpu(ags->hw_error_le),
                          &cper_addr, &read_ack_register_addr);
 
hw/arm/virt-acpi-build.c +5 -0
index e059317b002e..bd5582bc75f8 100644
@@ -889,6 +889,10 @@ static void acpi_align_size(GArray *blob, unsigned align)
     g_array_set_size(blob, ROUND_UP(acpi_data_len(blob), align));
 }
 
+static const AcpiNotificationSourceId hest_ghes_notify[] = {
+    { ACPI_HEST_SRC_ID_SYNC, ACPI_GHES_NOTIFY_SEA },
+};
+
 static
 void virt_acpi_build(VirtMachineState *vms, AcpiBuildTables *tables)
 {
@@ -944,6 +948,7 @@ void virt_acpi_build(VirtMachineState *vms, AcpiBuildTables *tables)
     if (vms->ras) {
         acpi_add_table(table_offsets, tables_blob);
         acpi_build_hest(tables_blob, tables->hardware_errors, tables->linker,
+                        hest_ghes_notify, ARRAY_SIZE(hest_ghes_notify),
                         vms->oem_id, vms->oem_table_id);
     }
 
include/hw/acpi/ghes.h +14 -7
index 39619a2457cb..9f0120d0d596 100644
@@ -57,20 +57,27 @@ enum AcpiGhesNotifyType {
     ACPI_GHES_NOTIFY_RESERVED = 12
 };
 
-enum {
-    ACPI_HEST_SRC_ID_SEA = 0,
-    /* future ids go here */
-
-    ACPI_GHES_ERROR_SOURCE_COUNT
-};
-
 typedef struct AcpiGhesState {
     uint64_t hw_error_le;
     bool present; /* True if GHES is present at all on this board */
 } AcpiGhesState;
 
+/*
+ * ID numbers used to fill HEST source ID field
+ */
+enum AcpiGhesSourceID {
+    ACPI_HEST_SRC_ID_SYNC,
+};
+
+typedef struct AcpiNotificationSourceId {
+    enum AcpiGhesSourceID source_id;
+    enum AcpiGhesNotifyType notify;
+} AcpiNotificationSourceId;
+
 void acpi_build_hest(GArray *table_data, GArray *hardware_errors,
                      BIOSLinker *linker,
+                     const AcpiNotificationSourceId * const notif_source,
+                     int num_sources,
                      const char *oem_id, const char *oem_table_id);
 void acpi_ghes_add_fw_cfg(AcpiGhesState *vms, FWCfgState *s,
                           GArray *hardware_errors);
Signature · 1 line
2.47.1
#15 lore raw

PATCH 15/31 acpi/ghes: add a firmware file with HEST address

In reply to Mauro Carvalho Chehab

Store HEST table address at GPA, placing its content at hest_addr_le variable.

---

Change from v8:
- hest_addr_lr is now pointing to the error source size and data.

---
 hw/acpi/ghes.c         | 17 ++++++++++++++++-
 include/hw/acpi/ghes.h |  1 +
 2 files changed, 17 insertions(+), 1 deletion(-)
hw/acpi/ghes.c +16 -1
index b77e5c9d1b19..4a826c8ca6d4 100644
@@ -30,6 +30,7 @@
 
 #define ACPI_HW_ERROR_FW_CFG_FILE           "etc/hardware_errors"
 #define ACPI_HW_ERROR_ADDR_FW_CFG_FILE      "etc/hardware_errors_addr"
+#define ACPI_HEST_ADDR_FW_CFG_FILE          "etc/acpi_table_hest_addr"
 
 /* The max size in bytes for one error block */
 #define ACPI_GHES_MAX_RAW_DATA_LENGTH   (1 * KiB)
@@ -261,7 +262,7 @@ static void build_ghes_error_table(GArray *hardware_errors, BIOSLinker *linker,
     }
 
     /*
-     * tell firmware to write hardware_errors GPA into
+     * Tell firmware to write hardware_errors GPA into
      * hardware_errors_addr fw_cfg, once the former has been initialized.
      */
     bios_linker_loader_write_pointer(linker, ACPI_HW_ERROR_ADDR_FW_CFG_FILE, 0,
@@ -355,6 +356,8 @@ void acpi_build_hest(GArray *table_data, GArray *hardware_errors,
 
     acpi_table_begin(&table, table_data);
 
+    int hest_offset = table_data->len;
+
     /* Error Source Count */
     build_append_int_noprefix(table_data, num_sources, 4);
     for (i = 0; i < num_sources; i++) {
@@ -362,6 +365,15 @@ void acpi_build_hest(GArray *table_data, GArray *hardware_errors,
     }
 
     acpi_table_end(linker, &table);
+
+    /*
+     * tell firmware to write into GPA the address of HEST via fw_cfg,
+     * once initialized.
+     */
+    bios_linker_loader_write_pointer(linker,
+                                     ACPI_HEST_ADDR_FW_CFG_FILE, 0,
+                                     sizeof(uint64_t),
+                                     ACPI_BUILD_TABLE_FILE, hest_offset);
 }
 
 void acpi_ghes_add_fw_cfg(AcpiGhesState *ags, FWCfgState *s,
@@ -375,6 +387,9 @@ void acpi_ghes_add_fw_cfg(AcpiGhesState *ags, FWCfgState *s,
     fw_cfg_add_file_callback(s, ACPI_HW_ERROR_ADDR_FW_CFG_FILE, NULL, NULL,
         NULL, &(ags->hw_error_le), sizeof(ags->hw_error_le), false);
 
+    fw_cfg_add_file_callback(s, ACPI_HEST_ADDR_FW_CFG_FILE, NULL, NULL,
+        NULL, &(ags->hest_addr_le), sizeof(ags->hest_addr_le), false);
+
     ags->present = true;
 }
 
include/hw/acpi/ghes.h +1 -0
index 9f0120d0d596..237721fec0a2 100644
@@ -58,6 +58,7 @@ enum AcpiGhesNotifyType {
 };
 
 typedef struct AcpiGhesState {
+    uint64_t hest_addr_le;
     uint64_t hw_error_le;
     bool present; /* True if GHES is present at all on this board */
 } AcpiGhesState;
Signature · 1 line
2.47.1
#16 lore raw

PATCH 16/31 acpi/ghes: Use HEST table offsets when preparing GHES records

In reply to Mauro Carvalho Chehab

There are two pointers that are needed during error injection:

1. The start address of the CPER block to be stored;
2. The address of the ack, which needs a reset before next error.

It is preferable to calculate them from the HEST table. This allows checking the source ID, the size of the table and the type of the HEST error block structures.

Yet, keep the old code, as this is needed for migration purposes.

---
 hw/acpi/ghes.c | 106 ++++++++++++++++++++++++++++++++++++++++++++-----
 1 file changed, 96 insertions(+), 10 deletions(-)
hw/acpi/ghes.c +96 -10
index 4a826c8ca6d4..af55bfe106bf 100644
@@ -61,6 +61,25 @@
  */
 #define ACPI_GHES_GESB_SIZE                 20
 
+/*
+ * Offsets with regards to the start of the HEST table stored at
+ * ags->hest_addr_le, according with the memory layout map at
+ * docs/specs/acpi_hest_ghes.rst.
+ */
+
+/*
+ * ACPI 6.2: 18.3.2.8 Generic Hardware Error Source version 2
+ * Table 18-382 Generic Hardware Error Source version 2 (GHESv2) Structure
+ */
+#define HEST_GHES_V2_TABLE_SIZE  92
+#define GHES_ACK_OFFSET          (64 + GAS_ADDR_OFFSET)
+
+/*
+ * ACPI 6.2: 18.3.2.7: Generic Hardware Error Source
+ * Table 18-380: 'Error Status Address' field
+ */
+#define GHES_ERR_ST_ADDR_OFFSET  (20 + GAS_ADDR_OFFSET)
+
 /*
  * Values for error_severity field
  */
@@ -212,14 +231,6 @@ static void build_ghes_error_table(GArray *hardware_errors, BIOSLinker *linker,
 {
     int i, error_status_block_offset;
 
-    /*
-     * TODO: Current version supports only one source.
-     * A further patch will drop this check, after adding a proper migration
-     * code, as, for the code to work, we need to store a bios pointer to the
-     * HEST table.
-     */
-    assert(num_sources == 1);
-
     /* Build error_block_address */
     for (i = 0; i < num_sources; i++) {
         build_append_int_noprefix(hardware_errors, 0, sizeof(uint64_t));
@@ -419,6 +430,76 @@ static void get_hw_error_offsets(uint64_t ghes_addr,
     *read_ack_register_addr = ghes_addr + sizeof(uint64_t);
 }
 
+static void get_ghes_source_offsets(uint16_t source_id, uint64_t hest_addr,
+                                    uint64_t *cper_addr,
+                                    uint64_t *read_ack_start_addr,
+                                    Error **errp)
+{
+    uint64_t hest_err_block_addr, hest_read_ack_addr;
+    uint64_t err_source_struct, error_block_addr;
+    uint32_t num_sources, i;
+
+    if (!hest_addr) {
+        return;
+    }
+
+    cpu_physical_memory_read(hest_addr, &num_sources, sizeof(num_sources));
+    num_sources = le32_to_cpu(num_sources);
+
+    err_source_struct = hest_addr + sizeof(num_sources);
+
+    /*
+     * Currently, HEST Error source navigates only for GHESv2 tables
+     */
+
+    for (i = 0; i < num_sources; i++) {
+        uint64_t addr = err_source_struct;
+        uint16_t type, src_id;
+
+        cpu_physical_memory_read(addr, &type, sizeof(type));
+        type = le16_to_cpu(type);
+
+        /* For now, we only know the size of GHESv2 table */
+        if (type != ACPI_GHES_SOURCE_GENERIC_ERROR_V2) {
+            error_setg(errp, "HEST: type %d not supported.", type);
+            return;
+        }
+
+        /* Compare CPER source address at the GHESv2 structure */
+        addr += sizeof(type);
+        cpu_physical_memory_read(addr, &src_id, sizeof(src_id));
+
+        if (src_id == source_id) {
+            break;
+        }
+
+        err_source_struct += HEST_GHES_V2_TABLE_SIZE;
+    }
+    if (i == num_sources) {
+        error_setg(errp, "HEST: Source %d not found.", source_id);
+        return;
+    }
+
+    /* Navigate though table address pointers */
+    hest_err_block_addr = err_source_struct + GHES_ERR_ST_ADDR_OFFSET;
+    hest_read_ack_addr = err_source_struct + GHES_ACK_OFFSET;
+
+    cpu_physical_memory_read(hest_err_block_addr, &error_block_addr,
+                             sizeof(error_block_addr));
+
+    error_block_addr =  le64_to_cpu(error_block_addr);
+
+    cpu_physical_memory_read(error_block_addr, cper_addr,
+                             sizeof(*cper_addr));
+
+    *cper_addr = le64_to_cpu(*cper_addr);
+
+    cpu_physical_memory_read(hest_read_ack_addr, read_ack_start_addr,
+                             sizeof(*read_ack_start_addr));
+
+    *read_ack_start_addr = le64_to_cpu(*read_ack_start_addr);
+}
+
 void ghes_record_cper_errors(const void *cper, size_t len,
                              uint16_t source_id, Error **errp)
 {
@@ -439,8 +520,13 @@ void ghes_record_cper_errors(const void *cper, size_t len,
     }
     ags = &acpi_ged_state->ghes_state;
 
-    get_hw_error_offsets(le64_to_cpu(ags->hw_error_le),
-                         &cper_addr, &read_ack_register_addr);
+    if (!ags->hest_addr_le) {
+        get_hw_error_offsets(le64_to_cpu(ags->hw_error_le),
+                             &cper_addr, &read_ack_register_addr);
+    } else {
+        get_ghes_source_offsets(source_id, le64_to_cpu(ags->hest_addr_le),
+                                &cper_addr, &read_ack_register_addr, errp);
+    }
 
     if (!cper_addr) {
         error_setg(errp, "can not find Generic Error Status Block");
Signature · 1 line
2.47.1
#17 lore raw

PATCH 17/31 acpi/generic_event_device: Update GHES migration to cover hest addr

In reply to Mauro Carvalho Chehab

The GHES migration logic at GED should now support HEST table location too.

---
 hw/acpi/generic_event_device.c | 29 +++++++++++++++++++++++++++++
 1 file changed, 29 insertions(+)
hw/acpi/generic_event_device.c +29 -0
index 17baf36132a8..c1116dd8d7ae 100644
@@ -387,6 +387,34 @@ static const VMStateDescription vmstate_ghes_state = {
     }
 };
 
+static const VMStateDescription vmstate_hest = {
+    .name = "acpi-hest",
+    .version_id = 1,
+    .minimum_version_id = 1,
+    .fields = (const VMStateField[]) {
+        VMSTATE_UINT64(hest_addr_le, AcpiGhesState),
+        VMSTATE_END_OF_LIST()
+    },
+};
+
+static bool hest_needed(void *opaque)
+{
+    AcpiGedState *s = opaque;
+    return s->ghes_state.hest_addr_le;
+}
+
+static const VMStateDescription vmstate_hest_state = {
+    .name = "acpi-ged/hest",
+    .version_id = 1,
+    .minimum_version_id = 1,
+    .needed = hest_needed,
+    .fields = (const VMStateField[]) {
+        VMSTATE_STRUCT(ghes_state, AcpiGedState, 1,
+                       vmstate_hest, AcpiGhesState),
+        VMSTATE_END_OF_LIST()
+    }
+};
+
 static const VMStateDescription vmstate_acpi_ged = {
     .name = "acpi-ged",
     .version_id = 1,
@@ -399,6 +427,7 @@ static const VMStateDescription vmstate_acpi_ged = {
         &vmstate_memhp_state,
         &vmstate_cpuhp_state,
         &vmstate_ghes_state,
+        &vmstate_hest_state,
         NULL
     }
 };
Signature · 1 line
2.47.1
#18 lore raw

PATCH 18/31 acpi/generic_event_device: add logic to detect if HEST addr is available

In reply to Mauro Carvalho Chehab

Create a new property (x-has-hest-addr) and use it to detect if the GHES table offsets can be calculated from the HEST address (qemu 9.2 and upper) or via the legacy way via an offset obtained from the hardware_errors firmware file.

---
 hw/acpi/generic_event_device.c |  1 +
 hw/acpi/ghes.c                 | 24 +++++++++++++++++-------
 hw/arm/virt-acpi-build.c       | 30 ++++++++++++++++++++++++++----
 hw/core/machine.c              |  2 ++
 include/hw/acpi/ghes.h         |  1 +
 5 files changed, 47 insertions(+), 11 deletions(-)
hw/acpi/generic_event_device.c +1 -0
index c1116dd8d7ae..df6b4fab2d30 100644
@@ -318,6 +318,7 @@ static void acpi_ged_send_event(AcpiDeviceIf *adev, AcpiEventStatusBits ev)
 
 static Property acpi_ged_properties[] = {
     DEFINE_PROP_UINT32("ged-event", AcpiGedState, ged_event_bitmap, 0),
+    DEFINE_PROP_BOOL("x-has-hest-addr", AcpiGedState, ghes_state.hest_lookup, true),
     DEFINE_PROP_END_OF_LIST(),
 };
 
hw/acpi/ghes.c +17 -7
index af55bfe106bf..c9295a3b0db7 100644
@@ -361,6 +361,8 @@ void acpi_build_hest(GArray *table_data, GArray *hardware_errors,
 {
     AcpiTable table = { .sig = "HEST", .rev = 1,
                         .oem_id = oem_id, .oem_table_id = oem_table_id };
+    AcpiGedState *acpi_ged_state;
+    AcpiGhesState *ags;
     int i;
 
     build_ghes_error_table(hardware_errors, linker, num_sources);
@@ -381,10 +383,16 @@ void acpi_build_hest(GArray *table_data, GArray *hardware_errors,
      * tell firmware to write into GPA the address of HEST via fw_cfg,
      * once initialized.
      */
-    bios_linker_loader_write_pointer(linker,
-                                     ACPI_HEST_ADDR_FW_CFG_FILE, 0,
-                                     sizeof(uint64_t),
-                                     ACPI_BUILD_TABLE_FILE, hest_offset);
+
+    acpi_ged_state = ACPI_GED(object_resolve_path_type("", TYPE_ACPI_GED,
+                                                       NULL));
+    ags = &acpi_ged_state->ghes_state;
+    if (ags->hest_lookup) {
+        bios_linker_loader_write_pointer(linker,
+                                         ACPI_HEST_ADDR_FW_CFG_FILE, 0,
+                                         sizeof(uint64_t),
+                                         ACPI_BUILD_TABLE_FILE, hest_offset);
+    }
 }
 
 void acpi_ghes_add_fw_cfg(AcpiGhesState *ags, FWCfgState *s,
@@ -398,8 +406,10 @@ void acpi_ghes_add_fw_cfg(AcpiGhesState *ags, FWCfgState *s,
     fw_cfg_add_file_callback(s, ACPI_HW_ERROR_ADDR_FW_CFG_FILE, NULL, NULL,
         NULL, &(ags->hw_error_le), sizeof(ags->hw_error_le), false);
 
-    fw_cfg_add_file_callback(s, ACPI_HEST_ADDR_FW_CFG_FILE, NULL, NULL,
-        NULL, &(ags->hest_addr_le), sizeof(ags->hest_addr_le), false);
+    if (ags->hest_lookup) {
+        fw_cfg_add_file_callback(s, ACPI_HEST_ADDR_FW_CFG_FILE, NULL, NULL,
+            NULL, &(ags->hest_addr_le), sizeof(ags->hest_addr_le), false);
+    }
 
     ags->present = true;
 }
@@ -520,7 +530,7 @@ void ghes_record_cper_errors(const void *cper, size_t len,
     }
     ags = &acpi_ged_state->ghes_state;
 
-    if (!ags->hest_addr_le) {
+    if (!ags->hest_lookup) {
         get_hw_error_offsets(le64_to_cpu(ags->hw_error_le),
                              &cper_addr, &read_ack_register_addr);
     } else {
hw/arm/virt-acpi-build.c +26 -4
index bd5582bc75f8..46ce3f3bb07a 100644
@@ -893,6 +893,10 @@ static const AcpiNotificationSourceId hest_ghes_notify[] = {
     { ACPI_HEST_SRC_ID_SYNC, ACPI_GHES_NOTIFY_SEA },
 };
 
+static const AcpiNotificationSourceId hest_ghes_notify_9_1[] = {
+    { ACPI_HEST_SRC_ID_SYNC, ACPI_GHES_NOTIFY_SEA },
+};
+
 static
 void virt_acpi_build(VirtMachineState *vms, AcpiBuildTables *tables)
 {
@@ -946,10 +950,28 @@ void virt_acpi_build(VirtMachineState *vms, AcpiBuildTables *tables)
     build_dbg2(tables_blob, tables->linker, vms);
 
     if (vms->ras) {
-        acpi_add_table(table_offsets, tables_blob);
-        acpi_build_hest(tables_blob, tables->hardware_errors, tables->linker,
-                        hest_ghes_notify, ARRAY_SIZE(hest_ghes_notify),
-                        vms->oem_id, vms->oem_table_id);
+        AcpiGhesState *ags;
+        AcpiGedState *acpi_ged_state;
+
+        acpi_ged_state = ACPI_GED(object_resolve_path_type("", TYPE_ACPI_GED,
+                                                       NULL));
+        if (acpi_ged_state) {
+            ags = &acpi_ged_state->ghes_state;
+
+            acpi_add_table(table_offsets, tables_blob);
+
+            if (!ags->hest_lookup) {
+                acpi_build_hest(tables_blob, tables->hardware_errors,
+                                tables->linker, hest_ghes_notify_9_1,
+                                ARRAY_SIZE(hest_ghes_notify_9_1),
+                                vms->oem_id, vms->oem_table_id);
+            } else {
+                acpi_build_hest(tables_blob, tables->hardware_errors,
+                                tables->linker, hest_ghes_notify,
+                                ARRAY_SIZE(hest_ghes_notify),
+                                vms->oem_id, vms->oem_table_id);
+            }
+        }
     }
 
     if (ms->numa_state->num_nodes > 0) {
hw/core/machine.c +2 -0
index f29fe959647f..b81fea273e6b 100644
@@ -34,10 +34,12 @@
 #include "hw/virtio/virtio-pci.h"
 #include "hw/virtio/virtio-net.h"
 #include "hw/virtio/virtio-iommu.h"
+#include "hw/acpi/generic_event_device.h"
 #include "audio/audio.h"
 
 GlobalProperty hw_compat_9_1[] = {
     { TYPE_PCI_DEVICE, "x-pcie-ext-tag", "false" },
+    { TYPE_ACPI_GED, "x-has-hest-addr", "false" },
 };
 const size_t hw_compat_9_1_len = G_N_ELEMENTS(hw_compat_9_1);
 
include/hw/acpi/ghes.h +1 -0
index 237721fec0a2..164ed8b0f9a3 100644
@@ -61,6 +61,7 @@ typedef struct AcpiGhesState {
     uint64_t hest_addr_le;
     uint64_t hw_error_le;
     bool present; /* True if GHES is present at all on this board */
+    bool hest_lookup; /* True if HEST address is present */
 } AcpiGhesState;
 
 /*
Signature · 1 line
2.47.1
#19 lore raw

PATCH 19/31 acpi/ghes: add a notifier to notify when error data is ready

In reply to Mauro Carvalho Chehab

Some error injection notify methods are async, like GPIO notify. Add a notifier to be used when the error record is ready to be sent to the guest OS.

---
 hw/acpi/ghes.c         | 5 ++++-
 include/hw/acpi/ghes.h | 3 +++
 2 files changed, 7 insertions(+), 1 deletion(-)
hw/acpi/ghes.c +4 -1
index c9295a3b0db7..7035b76fd222 100644
@@ -510,6 +510,9 @@ static void get_ghes_source_offsets(uint16_t source_id, uint64_t hest_addr,
     *read_ack_start_addr = le64_to_cpu(*read_ack_start_addr);
 }
 
+NotifierList acpi_generic_error_notifiers =
+    NOTIFIER_LIST_INITIALIZER(error_device_notifiers);
+
 void ghes_record_cper_errors(const void *cper, size_t len,
                              uint16_t source_id, Error **errp)
 {
@@ -565,7 +568,7 @@ void ghes_record_cper_errors(const void *cper, size_t len,
     /* Write the generic error data entry into guest memory */
     cpu_physical_memory_write(cper_addr, cper, len);
 
-    return;
+    notifier_list_notify(&acpi_generic_error_notifiers, NULL);
 }
 
 int acpi_ghes_memory_errors(uint16_t source_id, uint64_t physical_address)
include/hw/acpi/ghes.h +3 -0
index 164ed8b0f9a3..2e8405edfe27 100644
@@ -24,6 +24,9 @@
 
 #include "hw/acpi/bios-linker-loader.h"
 #include "qapi/error.h"
+#include "qemu/notify.h"
+
+extern NotifierList acpi_generic_error_notifiers;
 
 /*
  * Values for Hardware Error Notification Type field
Signature · 1 line
2.47.1
#20 lore raw

PATCH 20/31 acpi/generic_event_device: add an APEI error device

In reply to Mauro Carvalho Chehab

Adds a generic error device to handle generic hardware error events as specified at ACPI 6.5 specification at 18.3.2.7.2:
https://uefi.org/specs/ACPI/6.5/18_Platform_Error_Interfaces.html#event-notification-for-generic-error-sources
using HID PNP0C33.

The PNP0C33 device is used to report hardware errors to the guest via ACPI APEI Generic Hardware Error Source (GHES).

---
 hw/acpi/aml-build.c                    | 10 ++++++++++
 hw/acpi/generic_event_device.c         |  8 ++++++++
 include/hw/acpi/acpi_dev_interface.h   |  1 +
 include/hw/acpi/aml-build.h            |  2 ++
 include/hw/acpi/generic_event_device.h |  1 +
 5 files changed, 22 insertions(+)
hw/acpi/aml-build.c +10 -0
index 72282b173ec7..dc38b5810228 100644
@@ -2602,3 +2602,13 @@ Aml *aml_i2c_serial_bus_device(uint16_t address, const char *resource_source)
 
     return var;
 }
+
+/* ACPI 5.0b: 18.3.2.6.2 Event Notification For Generic Error Sources */
+Aml *aml_error_device(void)
+{
+    Aml *dev = aml_device(ACPI_APEI_ERROR_DEVICE);
+    aml_append(dev, aml_name_decl("_HID", aml_string("PNP0C33")));
+    aml_append(dev, aml_name_decl("_UID", aml_int(0)));
+
+    return dev;
+}
hw/acpi/generic_event_device.c +8 -0
index df6b4fab2d30..2213ec076958 100644
@@ -26,6 +26,7 @@ static const uint32_t ged_supported_events[] = {
     ACPI_GED_PWR_DOWN_EVT,
     ACPI_GED_NVDIMM_HOTPLUG_EVT,
     ACPI_GED_CPU_HOTPLUG_EVT,
+    ACPI_GED_ERROR_EVT,
 };
 
 /*
@@ -116,6 +117,11 @@ void build_ged_aml(Aml *table, const char *name, HotplugHandler *hotplug_dev,
                            aml_notify(aml_name(ACPI_POWER_BUTTON_DEVICE),
                                       aml_int(0x80)));
                 break;
+            case ACPI_GED_ERROR_EVT:
+                aml_append(if_ctx,
+                           aml_notify(aml_name(ACPI_APEI_ERROR_DEVICE),
+                                      aml_int(0x80)));
+                break;
             case ACPI_GED_NVDIMM_HOTPLUG_EVT:
                 aml_append(if_ctx,
                            aml_notify(aml_name("\\_SB.NVDR"),
@@ -295,6 +301,8 @@ static void acpi_ged_send_event(AcpiDeviceIf *adev, AcpiEventStatusBits ev)
         sel = ACPI_GED_MEM_HOTPLUG_EVT;
     } else if (ev & ACPI_POWER_DOWN_STATUS) {
         sel = ACPI_GED_PWR_DOWN_EVT;
+    } else if (ev & ACPI_GENERIC_ERROR) {
+        sel = ACPI_GED_ERROR_EVT;
     } else if (ev & ACPI_NVDIMM_HOTPLUG_STATUS) {
         sel = ACPI_GED_NVDIMM_HOTPLUG_EVT;
     } else if (ev & ACPI_CPU_HOTPLUG_STATUS) {
include/hw/acpi/acpi_dev_interface.h +1 -0
index 68d9d15f50aa..8294f8f0ccca 100644
@@ -13,6 +13,7 @@ typedef enum {
     ACPI_NVDIMM_HOTPLUG_STATUS = 16,
     ACPI_VMGENID_CHANGE_STATUS = 32,
     ACPI_POWER_DOWN_STATUS = 64,
+    ACPI_GENERIC_ERROR = 128,
 } AcpiEventStatusBits;
 
 #define TYPE_ACPI_DEVICE_IF "acpi-device-interface"
include/hw/acpi/aml-build.h +2 -0
index 4fd5da49e7e6..771f6aa78a6c 100644
@@ -252,6 +252,7 @@ struct CrsRangeSet {
 /* Consumer/Producer */
 #define AML_SERIAL_BUS_FLAG_CONSUME_ONLY        (1 << 1)
 
+#define ACPI_APEI_ERROR_DEVICE   "GEDD"
 /**
  * init_aml_allocator:
  *
@@ -382,6 +383,7 @@ Aml *aml_dma(AmlDmaType typ, AmlDmaBusMaster bm, AmlTransferSize sz,
              uint8_t channel);
 Aml *aml_sleep(uint64_t msec);
 Aml *aml_i2c_serial_bus_device(uint16_t address, const char *resource_source);
+Aml *aml_error_device(void);
 
 /* Block AML object primitives */
 Aml *aml_scope(const char *name_format, ...) G_GNUC_PRINTF(1, 2);
include/hw/acpi/generic_event_device.h +1 -0
index d2dac87b4a9f..1c18ac296fcb 100644
@@ -101,6 +101,7 @@ OBJECT_DECLARE_SIMPLE_TYPE(AcpiGedState, ACPI_GED)
 #define ACPI_GED_PWR_DOWN_EVT      0x2
 #define ACPI_GED_NVDIMM_HOTPLUG_EVT 0x4
 #define ACPI_GED_CPU_HOTPLUG_EVT    0x8
+#define ACPI_GED_ERROR_EVT          0x10
 
 typedef struct GEDState {
     MemoryRegion evt;
Signature · 1 line
2.47.1
#21 lore raw

PATCH 21/31 arm/virt: Wire up a GED error device for ACPI / GHES

In reply to Mauro Carvalho Chehab

Adds support to ARM virtualization to allow handling generic error ACPI Event via GED & error source device.

It is aligned with Linux Kernel patch:
https://lore.kernel.org/lkml/[email protected]/

---

Changes from v8:

- Added a call to the function that produces GHES generic records, as this is now added earlier in this series.

---
 hw/arm/virt-acpi-build.c |  1 +
 hw/arm/virt.c            | 12 +++++++++++-
 include/hw/arm/virt.h    |  1 +
 3 files changed, 13 insertions(+), 1 deletion(-)
hw/arm/virt-acpi-build.c +1 -0
index 46ce3f3bb07a..eb5b61f636d2 100644
@@ -857,6 +857,7 @@ build_dsdt(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)
     }
 
     acpi_dsdt_add_power_button(scope);
+    aml_append(scope, aml_error_device());
 #ifdef CONFIG_TPM
     acpi_dsdt_add_tpm(scope, vms);
 #endif
hw/arm/virt.c +11 -1
index 1a381e9a2bd7..795d215521a3 100644
@@ -678,7 +678,7 @@ static inline DeviceState *create_acpi_ged(VirtMachineState *vms)
     DeviceState *dev;
     MachineState *ms = MACHINE(vms);
     int irq = vms->irqmap[VIRT_ACPI_GED];
-    uint32_t event = ACPI_GED_PWR_DOWN_EVT;
+    uint32_t event = ACPI_GED_PWR_DOWN_EVT | ACPI_GED_ERROR_EVT;
 
     if (ms->ram_slots) {
         event |= ACPI_GED_MEM_HOTPLUG_EVT;
@@ -1010,6 +1010,13 @@ static void virt_powerdown_req(Notifier *n, void *opaque)
     }
 }
 
+static void virt_generic_error_req(Notifier *n, void *opaque)
+{
+    VirtMachineState *s = container_of(n, VirtMachineState, generic_error_notifier);
+
+    acpi_send_event(s->acpi_dev, ACPI_GENERIC_ERROR);
+}
+
 static void create_gpio_keys(char *fdt, DeviceState *pl061_dev,
                              uint32_t phandle)
 {
@@ -2403,6 +2410,9 @@ static void machvirt_init(MachineState *machine)
 
     if (has_ged && aarch64 && firmware_loaded && virt_is_acpi_enabled(vms)) {
         vms->acpi_dev = create_acpi_ged(vms);
+        vms->generic_error_notifier.notify = virt_generic_error_req;
+        notifier_list_add(&acpi_generic_error_notifiers,
+                          &vms->generic_error_notifier);
     } else {
         create_gpio_devices(vms, VIRT_GPIO, sysmem);
     }
include/hw/arm/virt.h +1 -0
index aca4f8061b18..24ab84cd623d 100644
@@ -176,6 +176,7 @@ struct VirtMachineState {
     DeviceState *gic;
     DeviceState *acpi_dev;
     Notifier powerdown_notifier;
+    Notifier generic_error_notifier;
     PCIBus *bus;
     char *oem_id;
     char *oem_table_id;
Signature · 1 line
2.47.1
#22 lore raw

PATCH 22/31 qapi/acpi-hest: add an interface to do generic CPER error injection

In reply to Mauro Carvalho Chehab

Creates a QMP command to be used for generic ACPI APEI hardware error injection (HEST) via GHESv2, and add support for it for ARM guests.

Error injection uses ACPI_HEST_SRC_ID_QMP source ID to be platform independent. This is mapped at arch virt bindings, depending on the types supported by QEMU and by the BIOS. So, on ARM, this is supported via ACPI_GHES_NOTIFY_GPIO notification type.

This patch is co-authored:
- original ghes logic to inject a simple ARM record by Shiju Jose;
- generic logic to handle block addresses by Jonathan Cameron;
- generic GHESv2 error inject by Mauro Carvalho Chehab;

---

Changes since v9:
- ARM source IDs renamed to reflect SYNC/ASYNC;
- command name changed to better reflect what it does;
- some improvements at JSON documentation;
- add a check for QMP source at the notification logic.

---
 MAINTAINERS              |  7 +++++++
 hw/acpi/Kconfig          |  5 +++++
 hw/acpi/ghes.c           |  2 +-
 hw/acpi/ghes_cper.c      | 32 ++++++++++++++++++++++++++++++++
 hw/acpi/ghes_cper_stub.c | 19 +++++++++++++++++++
 hw/acpi/meson.build      |  2 ++
 hw/arm/virt-acpi-build.c |  1 +
 hw/arm/virt.c            |  7 +++++++
 include/hw/acpi/ghes.h   |  1 +
 include/hw/arm/virt.h    |  1 +
 qapi/acpi-hest.json      | 35 +++++++++++++++++++++++++++++++++++
 qapi/meson.build         |  1 +
 qapi/qapi-schema.json    |  1 +
 13 files changed, 113 insertions(+), 1 deletion(-)
 create mode 100644 hw/acpi/ghes_cper.c
 create mode 100644 hw/acpi/ghes_cper_stub.c
 create mode 100644 qapi/acpi-hest.json
MAINTAINERS +7 -0
index aaf0505a2146..ae79bf761c92 100644
@@ -2055,6 +2055,13 @@ F: hw/acpi/ghes.c
 F: include/hw/acpi/ghes.h
 F: docs/specs/acpi_hest_ghes.rst
 
+ACPI/HEST/GHES/ARM processor CPER
+R: Mauro Carvalho Chehab <[email protected]>
+S: Maintained
+F: hw/arm/ghes_cper.c
+F: hw/acpi/ghes_cper_stub.c
+F: qapi/acpi-hest.json
+
 ppc4xx
 L: [email protected]
 S: Orphan
hw/acpi/Kconfig +5 -0
index e07d3204eb36..73ffbb82c150 100644
@@ -51,6 +51,11 @@ config ACPI_APEI
     bool
     depends on ACPI
 
+config GHES_CPER
+    bool
+    depends on ACPI_APEI
+    default y
+
 config ACPI_PCI
     bool
     depends on ACPI && PCI
hw/acpi/ghes.c +1 -1
index 7035b76fd222..abca351b18de 100644
@@ -568,7 +568,7 @@ void ghes_record_cper_errors(const void *cper, size_t len,
     /* Write the generic error data entry into guest memory */
     cpu_physical_memory_write(cper_addr, cper, len);
 
-    notifier_list_notify(&acpi_generic_error_notifiers, NULL);
+    notifier_list_notify(&acpi_generic_error_notifiers, &source_id);
 }
 
 int acpi_ghes_memory_errors(uint16_t source_id, uint64_t physical_address)
hw/acpi/ghes_cper.c new file +32 -0
new file mode 100644
index 000000000000..02c47b41b990
@@ -0,0 +1,32 @@
+/*
+ * CPER payload parser for error injection
+ *
+ * Copyright(C) 2024 Huawei LTD.
+ *
+ * This code is licensed under the GPL version 2 or later. See the
+ * COPYING file in the top-level directory.
+ *
+ */
+
+#include "qemu/osdep.h"
+
+#include "qemu/base64.h"
+#include "qemu/error-report.h"
+#include "qemu/uuid.h"
+#include "qapi/qapi-commands-acpi-hest.h"
+#include "hw/acpi/ghes.h"
+
+void qmp_inject_ghes_error(const char *qmp_cper, Error **errp)
+{
+
+    uint8_t *cper;
+    size_t  len;
+
+    cper = qbase64_decode(qmp_cper, -1, &len, errp);
+    if (!cper) {
+        error_setg(errp, "missing GHES CPER payload");
+        return;
+    }
+
+    ghes_record_cper_errors(cper, len, ACPI_HEST_SRC_ID_QMP, errp);
+}
hw/acpi/ghes_cper_stub.c new file +19 -0
new file mode 100644
index 000000000000..8782e2c02fa8
@@ -0,0 +1,19 @@
+/*
+ * Stub interface for CPER payload parser for error injection
+ *
+ * Copyright(C) 2024 Huawei LTD.
+ *
+ * This code is licensed under the GPL version 2 or later. See the
+ * COPYING file in the top-level directory.
+ *
+ */
+
+#include "qemu/osdep.h"
+#include "qapi/error.h"
+#include "qapi/qapi-commands-acpi-hest.h"
+#include "hw/acpi/ghes.h"
+
+void qmp_inject_ghes_error(const char *cper, Error **errp)
+{
+    error_setg(errp, "GHES QMP error inject is not compiled in");
+}
hw/acpi/meson.build +2 -0
index c8854f4d4855..57e5f0df1d1c 100644
@@ -33,4 +33,6 @@ endif
 system_ss.add(when: 'CONFIG_ACPI', if_false: files('acpi-stub.c', 'aml-build-stub.c', 'ghes-stub.c', 'acpi_interface.c'))
 system_ss.add(when: 'CONFIG_ACPI_PCI_BRIDGE', if_false: files('pci-bridge-stub.c'))
 system_ss.add_all(when: 'CONFIG_ACPI', if_true: acpi_ss)
+system_ss.add(when: 'CONFIG_GHES_CPER', if_true: files('ghes_cper.c'))
+system_ss.add(when: 'CONFIG_GHES_CPER', if_false: files('ghes_cper_stub.c'))
 system_ss.add(files('acpi-qmp-cmds.c'))
hw/arm/virt-acpi-build.c +1 -0
index eb5b61f636d2..31f2db01458d 100644
@@ -892,6 +892,7 @@ static void acpi_align_size(GArray *blob, unsigned align)
 
 static const AcpiNotificationSourceId hest_ghes_notify[] = {
     { ACPI_HEST_SRC_ID_SYNC, ACPI_GHES_NOTIFY_SEA },
+    { ACPI_HEST_SRC_ID_QMP, ACPI_GHES_NOTIFY_GPIO },
 };
 
 static const AcpiNotificationSourceId hest_ghes_notify_9_1[] = {
hw/arm/virt.c +7 -0
index 795d215521a3..487b2a5ef7f8 100644
@@ -1012,6 +1012,13 @@ static void virt_powerdown_req(Notifier *n, void *opaque)
 
 static void virt_generic_error_req(Notifier *n, void *opaque)
 {
+    uint16_t *source_id = opaque;
+
+    /* Currently, only QMP source ID is async */
+    if (*source_id != ACPI_HEST_SRC_ID_QMP) {
+        return;
+    }
+
     VirtMachineState *s = container_of(n, VirtMachineState, generic_error_notifier);
 
     acpi_send_event(s->acpi_dev, ACPI_GENERIC_ERROR);
include/hw/acpi/ghes.h +1 -0
index 2e8405edfe27..32e14ffa1afe 100644
@@ -72,6 +72,7 @@ typedef struct AcpiGhesState {
  */
 enum AcpiGhesSourceID {
     ACPI_HEST_SRC_ID_SYNC,
+    ACPI_HEST_SRC_ID_QMP,       /* Use it only for QMP injected errors */
 };
 
 typedef struct AcpiNotificationSourceId {
include/hw/arm/virt.h +1 -0
index 24ab84cd623d..d96edea8a3f9 100644
@@ -33,6 +33,7 @@
 #include "exec/hwaddr.h"
 #include "qemu/notify.h"
 #include "hw/boards.h"
+#include "hw/acpi/ghes.h"
 #include "hw/arm/boot.h"
 #include "hw/arm/bsa.h"
 #include "hw/block/flash.h"
qapi/acpi-hest.json new file +35 -0
new file mode 100644
index 000000000000..d58fba485180
@@ -0,0 +1,35 @@
+# -*- Mode: Python -*-
+# vim: filetype=python
+
+##
+# == GHESv2 CPER Error Injection
+#
+# Defined since ACPI Specification 6.1,
+# section 18.3.2.8 Generic Hardware Error Source version 2. See:
+#
+# https://uefi.org/sites/default/files/resources/ACPI_6_1.pdf
+##
+
+
+##
+# @inject-ghes-error:
+#
+# Inject an error with additional ACPI 6.1 GHESv2 error information
+#
+# @cper: contains a base64 encoded string with raw data for a single
+#     CPER record with Generic Error Status Block, Generic Error Data
+#     Entry and generic error data payload, as described at
+#     https://uefi.org/specs/UEFI/2.10/Apx_N_Common_Platform_Error_Record.html#format
+#
+# Features:
+#
+# @unstable: This command is experimental.
+#
+# Since: 9.2
+##
+{ 'command': 'inject-ghes-error',
+  'data': {
+    'cper': 'str'
+  },
+  'features': [ 'unstable' ]
+}
qapi/meson.build +1 -0
index e7bc54e5d047..35cea6147262 100644
@@ -59,6 +59,7 @@ qapi_all_modules = [
 if have_system
   qapi_all_modules += [
     'acpi',
+    'acpi-hest',
     'audio',
     'cryptodev',
     'qdev',
qapi/qapi-schema.json +1 -0
index b1581988e4eb..baf19ab73afe 100644
@@ -75,6 +75,7 @@
 { 'include': 'misc-target.json' }
 { 'include': 'audio.json' }
 { 'include': 'acpi.json' }
+{ 'include': 'acpi-hest.json' }
 { 'include': 'pci.json' }
 { 'include': 'stats.json' }
 { 'include': 'virtio.json' }
Signature · 1 line
2.47.1
#23 lore raw

PATCH 23/31 scripts/ghes_inject: add a script to generate GHES error inject

In reply to Mauro Carvalho Chehab

Using the QMP GHESv2 API requires preparing a raw data array containing a CPER record.

Add a helper script with subcommands to prepare such data.

Currently, only ARM Processor error CPER record is supported.

---
 MAINTAINERS                    |   3 +
 scripts/arm_processor_error.py | 377 ++++++++++++++++++
 scripts/ghes_inject.py         |  51 +++
 scripts/qmp_helper.py          | 702 +++++++++++++++++++++++++++++++++
 4 files changed, 1133 insertions(+)
 create mode 100644 scripts/arm_processor_error.py
 create mode 100755 scripts/ghes_inject.py
 create mode 100644 scripts/qmp_helper.py
MAINTAINERS +3 -0
index ae79bf761c92..797c31277f95 100644
@@ -2061,6 +2061,9 @@ S: Maintained
 F: hw/arm/ghes_cper.c
 F: hw/acpi/ghes_cper_stub.c
 F: qapi/acpi-hest.json
+F: scripts/ghes_inject.py
+F: scripts/arm_processor_error.py
+F: scripts/qmp_helper.py
 
 ppc4xx
 L: [email protected]
scripts/arm_processor_error.py new file +377 -0

377 lines not on this page · raw message

scripts/ghes_inject.py new file +51 -0

51 lines not on this page · raw message

scripts/qmp_helper.py new file +702 -0

702 lines not on this page · raw message

Signature · 1 line
2.47.1
#24 lore raw

PATCH 24/31 target/arm: add an experimental mpidr arm cpu property object

In reply to Mauro Carvalho Chehab

Accurately injecting an ARM Processor error ACPI/APEI GHES error record requires the value of the ARM Multiprocessor Affinity Register (mpidr).

While ARM implements it, this is currently not visible.

Add a field at CPU storing it, and place it at arm_cpu_properties as experimental, thus allowing it to be queried via QMP using qom-get function.

---
 target/arm/cpu.c    |  1 +
 target/arm/cpu.h    |  1 +
 target/arm/helper.c | 10 ++++++++--
 3 files changed, 10 insertions(+), 2 deletions(-)
target/arm/cpu.c +1 -0
index 6938161b9541..aec9ea5000a0 100644
@@ -2636,6 +2636,7 @@ static ObjectClass *arm_cpu_class_by_name(const char *cpu_model)
 
 static Property arm_cpu_properties[] = {
     DEFINE_PROP_UINT64("midr", ARMCPU, midr, 0),
+    DEFINE_PROP_UINT64("x-mpidr", ARMCPU, mpidr, 0),
     DEFINE_PROP_UINT64("mp-affinity", ARMCPU,
                         mp_affinity, ARM64_AFFINITY_INVALID),
     DEFINE_PROP_INT32("node-id", ARMCPU, node_id, CPU_UNSET_NUMA_NODE_ID),
target/arm/cpu.h +1 -0
index d86e641280d4..1ccd2d6b0c3c 100644
@@ -1035,6 +1035,7 @@ struct ArchCPU {
         uint64_t reset_pmcr_el0;
     } isar;
     uint64_t midr;
+    uint64_t mpidr;
     uint32_t revidr;
     uint32_t reset_fpsid;
     uint64_t ctr;
target/arm/helper.c +8 -2
index f38eb054c06b..5b0ea8ba5fb8 100644
@@ -4700,7 +4700,7 @@ static uint64_t mpidr_read_val(CPUARMState *env)
     return mpidr;
 }
 
-static uint64_t mpidr_read(CPUARMState *env, const ARMCPRegInfo *ri)
+static uint64_t mpidr_read(CPUARMState *env)
 {
     unsigned int cur_el = arm_current_el(env);
 
@@ -4710,6 +4710,11 @@ static uint64_t mpidr_read(CPUARMState *env, const ARMCPRegInfo *ri)
     return mpidr_read_val(env);
 }
 
+static uint64_t mpidr_read_ri(CPUARMState *env, const ARMCPRegInfo *ri)
+{
+    return mpidr_read(env);
+}
+
 static const ARMCPRegInfo lpae_cp_reginfo[] = {
     /* NOP AMAIR0/1 */
     { .name = "AMAIR0", .state = ARM_CP_STATE_BOTH,
@@ -9741,7 +9746,7 @@ void register_cp_regs_for_features(ARMCPU *cpu)
             { .name = "MPIDR_EL1", .state = ARM_CP_STATE_BOTH,
               .opc0 = 3, .crn = 0, .crm = 0, .opc1 = 0, .opc2 = 5,
               .fgt = FGT_MPIDR_EL1,
-              .access = PL1_R, .readfn = mpidr_read, .type = ARM_CP_NO_RAW },
+              .access = PL1_R, .readfn = mpidr_read_ri, .type = ARM_CP_NO_RAW },
         };
 #ifdef CONFIG_USER_ONLY
         static const ARMCPRegUserSpaceInfo mpidr_user_cp_reginfo[] = {
@@ -9751,6 +9756,7 @@ void register_cp_regs_for_features(ARMCPU *cpu)
         modify_arm_cp_regs(mpidr_cp_reginfo, mpidr_user_cp_reginfo);
 #endif
         define_arm_cp_regs(cpu, mpidr_cp_reginfo);
+        cpu->mpidr = mpidr_read(env);
     }
 
     if (arm_feature(env, ARM_FEATURE_AUXCR)) {
Signature · 1 line
2.47.1
#25 lore raw

PATCH 25/31 scripts/arm_processor_error.py: retrieve mpidr if not filled

In reply to Mauro Carvalho Chehab

Add support to retrieve mpidr value via qom-get.

---
 scripts/arm_processor_error.py | 29 +++++++++++++++++++++--------
 1 file changed, 21 insertions(+), 8 deletions(-)
scripts/arm_processor_error.py +21 -8
index 62e0c5662232..b4321ff45517 100644
@@ -5,12 +5,10 @@
 #
 # Copyright (C) 2024 Mauro Carvalho Chehab <[email protected]>
 
-# TODO: current implementation has dummy defaults.
-#
-# For a better implementation, a QMP addition/call is needed to
-# retrieve some data for ARM Processor Error injection:
-#
-#   - ARM registers: power_state, mpidr.
+# Note: currently it lacks a method to fill the ARM Processor Error CPER
+# psci field from emulation. On a real hardware, this is filled only
+# when a CPU is not running. Implementing support for it to simulate a
+# real hardware is not trivial.
 
 import argparse
 import re
@@ -174,11 +172,26 @@ def send_cper(self, args):
         else:
             cper["running-state"] = 0
 
+        if args.mpidr:
+            cper["mpidr-el1"] = arg["mpidr"]
+        elif cpus:
+            cmd_arg = {
+                'path': cpus[0],
+                'property': "x-mpidr"
+            }
+            ret = qmp_cmd.send_cmd("qom-get", cmd_arg, may_open=True)
+            if isinstance(ret, int):
+                cper["mpidr-el1"] = ret
+            else:
+                cper["mpidr-el1"] = 0
+        else:
+            cper["mpidr-el1"] = 0
+
         if arm_valid_init:
             if args.affinity:
                 cper["valid"] |= self.arm_valid_bits["affinity"]
 
-            if args.mpidr:
+            if "mpidr-el1" in cper:
                 cper["valid"] |= self.arm_valid_bits["mpidr"]
 
             if "running-state" in cper:
@@ -362,7 +375,7 @@ def send_cper(self, args):
                 if isinstance(ret, int):
                     arg["midr-el1"] = ret
 
-        util.data_add(data, arg.get("mpidr-el1", 0), 8)
+        util.data_add(data, cper["mpidr-el1"], 8)
         util.data_add(data, arg.get("midr-el1", 0), 8)
         util.data_add(data, cper["running-state"], 4)
         util.data_add(data, arg.get("psci-state", 0), 4)
Signature · 1 line
2.47.1
#26 lore raw

PATCH 26/31 acpi/ghes: move offset calculus to a separate function

In reply to Mauro Carvalho Chehab

Currently, CPER address location is calculated as an offset of the hardware_errors table. It is also badly named, as the offset actually used is the address where the CPER data starts, and not the beginning of the error source.

Move the logic which calculates such offset to a separate function, in preparation for a patch that will be changing the logic to calculate it from the HEST table.

While here, properly name the variable which stores the cper address.

---
 hw/acpi/ghes.c | 40 +++++++++++++++++++++++++++++++---------
 1 file changed, 31 insertions(+), 9 deletions(-)
hw/acpi/ghes.c +31 -9
index 90d76b9c2d8c..a4453ee357bc 100644
@@ -364,10 +364,37 @@ void acpi_ghes_add_fw_cfg(AcpiGhesState *ags, FWCfgState *s,
     ags->present = true;
 }
 
+static void get_hw_error_offsets(uint64_t ghes_addr,
+                                 uint64_t *cper_addr,
+                                 uint64_t *read_ack_register_addr)
+{
+    if (!ghes_addr) {
+        return;
+    }
+
+    /*
+     * non-HEST version supports only one source, so no need to change
+     * the start offset based on the source ID. Also, we can't validate
+     * the source ID, as it is stored inside the HEST table.
+     */
+
+    cpu_physical_memory_read(ghes_addr, cper_addr,
+                             sizeof(*cper_addr));
+
+    *cper_addr = le64_to_cpu(*cper_addr);
+
+    /*
+     * As the current version supports only one source, the ack offset is
+     * just sizeof(uint64_t).
+     */
+    *read_ack_register_addr = ghes_addr +
+			      ACPI_GHES_ERROR_SOURCE_COUNT * sizeof(uint64_t);
+}
+
 void ghes_record_cper_errors(const void *cper, size_t len,
                              uint16_t source_id, Error **errp)
 {
-    uint64_t error_block_addr, read_ack_register_addr, read_ack_register = 0;
+    uint64_t cper_addr = 0, read_ack_register_addr = 0, read_ack_register;
     uint64_t start_addr;
     AcpiGedState *acpi_ged_state;
     AcpiGhesState *ags;
@@ -389,18 +416,13 @@ void ghes_record_cper_errors(const void *cper, size_t len,
 
     start_addr += source_id * sizeof(uint64_t);
 
-    cpu_physical_memory_read(start_addr, &error_block_addr,
-                             sizeof(error_block_addr));
+    get_hw_error_offsets(start_addr, &cper_addr, &read_ack_register_addr);
 
-    error_block_addr = le64_to_cpu(error_block_addr);
-    if (!error_block_addr) {
+    if (!cper_addr) {
         error_setg(errp, "can not find Generic Error Status Block");
         return;
     }
 
-    read_ack_register_addr = start_addr +
-                             ACPI_GHES_ERROR_SOURCE_COUNT * sizeof(uint64_t);
-
     cpu_physical_memory_read(read_ack_register_addr,
                              &read_ack_register, sizeof(read_ack_register));
 
@@ -421,7 +443,7 @@ void ghes_record_cper_errors(const void *cper, size_t len,
         &read_ack_register, sizeof(uint64_t));
 
     /* Write the generic error data entry into guest memory */
-    cpu_physical_memory_write(error_block_addr, cper, len);
+    cpu_physical_memory_write(cper_addr, cper, len);
 
     return;
 }
Signature · 1 line
2.47.1
#27 lore raw

PATCH 27/31 DEBUG

In reply to Mauro Carvalho Chehab
---
 hw/acpi/ghes.c | 2 ++
 1 file changed, 2 insertions(+)
hw/acpi/ghes.c +2 -0
index abca351b18de..1fe4c536611a 100644
@@ -534,9 +534,11 @@ void ghes_record_cper_errors(const void *cper, size_t len,
     ags = &acpi_ged_state->ghes_state;
 
     if (!ags->hest_lookup) {
+        fprintf(stderr,"Using old GHES lookup\n");
         get_hw_error_offsets(le64_to_cpu(ags->hw_error_le),
                              &cper_addr, &read_ack_register_addr);
     } else {
+        fprintf(stderr,"Using new HEST lookup\n");
         get_ghes_source_offsets(source_id, le64_to_cpu(ags->hest_addr_le),
                                 &cper_addr, &read_ack_register_addr, errp);
     }
Signature · 1 line
2.47.1
#31 lore raw

PATCH 28/31 acpi/ghes: Change ghes fill logic to work with only one source

In reply to Mauro Carvalho Chehab

Extending to multiple sources require a BIOS pointer to the beginning of the HEST table, which in turn requires a backward-compatible code.

So, the current code supports only one source. Ensure that and simplify the code.

---
 hw/acpi/ghes.c | 12 ++++--------
 1 file changed, 4 insertions(+), 8 deletions(-)
hw/acpi/ghes.c +4 -8
index a4453ee357bc..5efa50413af3 100644
@@ -387,15 +387,13 @@ static void get_hw_error_offsets(uint64_t ghes_addr,
      * As the current version supports only one source, the ack offset is
      * just sizeof(uint64_t).
      */
-    *read_ack_register_addr = ghes_addr +
-			      ACPI_GHES_ERROR_SOURCE_COUNT * sizeof(uint64_t);
+    *read_ack_register_addr = ghes_addr + sizeof(uint64_t);
 }
 
 void ghes_record_cper_errors(const void *cper, size_t len,
                              uint16_t source_id, Error **errp)
 {
     uint64_t cper_addr = 0, read_ack_register_addr = 0, read_ack_register;
-    uint64_t start_addr;
     AcpiGedState *acpi_ged_state;
     AcpiGhesState *ags;
 
@@ -412,11 +410,9 @@ void ghes_record_cper_errors(const void *cper, size_t len,
     }
     ags = &acpi_ged_state->ghes_state;
 
-    start_addr = le64_to_cpu(ags->hw_error_le);
-
-    start_addr += source_id * sizeof(uint64_t);
-
-    get_hw_error_offsets(start_addr, &cper_addr, &read_ack_register_addr);
+    assert(ACPI_GHES_ERROR_SOURCE_COUNT == 1);
+    get_hw_error_offsets(le64_to_cpu(ags->hw_error_le),
+                         &cper_addr, &read_ack_register_addr);
 
     if (!cper_addr) {
         error_setg(errp, "can not find Generic Error Status Block");
Signature · 1 line
2.47.1
#32 lore raw

PATCH 29/31 HACK: use GPIO as source ID for virt-9.1 machines

In reply to Mauro Carvalho Chehab

This reverts commit 692373fc8838a6450ff5b5a8708646a673b693dd.

---
 hw/arm/virt-acpi-build.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
hw/arm/virt-acpi-build.c +1 -1
index 31f2db01458d..55d12562e83e 100644
@@ -896,7 +896,7 @@ static const AcpiNotificationSourceId hest_ghes_notify[] = {
 };
 
 static const AcpiNotificationSourceId hest_ghes_notify_9_1[] = {
-    { ACPI_HEST_SRC_ID_SYNC, ACPI_GHES_NOTIFY_SEA },
+    { ACPI_HEST_SRC_ID_QMP, ACPI_GHES_NOTIFY_GPIO },
 };
 
 static
Signature · 1 line
2.47.1
#33 lore raw

PATCH 30/31 docs: acpi_hest_ghes: fix documentation for CPER size

In reply to Mauro Carvalho Chehab

While the spec defines a CPER size of 4KiB for each record, currently it is set to 1KiB. Fix the documentation and add a pointer to the macro name there, as this may help to keep it updated.

---
 docs/specs/acpi_hest_ghes.rst | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
docs/specs/acpi_hest_ghes.rst +4 -2
index 68f1fbe0a4af..c3e9f8d9a702 100644
@@ -67,8 +67,10 @@ Design Details
 (3) The address registers table contains N Error Block Address entries
     and N Read Ack Register entries. The size for each entry is 8-byte.
     The Error Status Data Block table contains N Error Status Data Block
-    entries. The size for each entry is 4096(0x1000) bytes. The total size
-    for the "etc/hardware_errors" fw_cfg blob is (N * 8 * 2 + N * 4096) bytes.
+    entries. The size for each entry is defined at the source code as
+    ACPI_GHES_MAX_RAW_DATA_LENGTH (currently 1024 bytes). The total size
+    for the "etc/hardware_errors" fw_cfg blob is
+    (N * 8 * 2 + N * ACPI_GHES_MAX_RAW_DATA_LENGTH) bytes.
     N is the number of the kinds of hardware error sources.
 
 (4) QEMU generates the ACPI linker/loader script for the firmware. The
Signature · 1 line
2.47.1
#34 lore raw

PATCH 31/31 FIXME: acpi/ghes: properly set data record size

In reply to Mauro Carvalho Chehab
---
 hw/acpi/ghes.c | 17 +++++++----------
 1 file changed, 7 insertions(+), 10 deletions(-)
hw/acpi/ghes.c +7 -10
index 1fe4c536611a..856551df2103 100644
@@ -211,6 +211,12 @@ ghes_gen_err_data_uncorrectable_recoverable(GArray *block,
      */
     QemuUUID fru_id = {};
 
+    /*
+     * Calculate the size with this block. No need to check for
+     * too big CPER, as CPER size is checked at ghes_record_cper_errors()
+     */
+    data_length += ACPI_GHES_GESB_SIZE;
+
     /* Build the new generic error status block header */
     acpi_ghes_generic_error_status(block, ACPI_GEBS_UNCORRECTABLE,
         0, 0, data_length, ACPI_CPER_SEV_RECOVERABLE);
@@ -580,21 +586,12 @@ int acpi_ghes_memory_errors(uint16_t source_id, uint64_t physical_address)
           UUID_LE(0xA5BC1114, 0x6F64, 0x4EDE, 0xB8, 0x63, 0x3E, 0x83, \
                   0xED, 0x7C, 0x83, 0xB1);
     Error *errp = NULL;
-    int data_length;
     GArray *block;
 
     block = g_array_new(false, true /* clear */, 1);
 
-    data_length = ACPI_GHES_DATA_LENGTH + ACPI_GHES_MEM_CPER_LENGTH;
-    /*
-     * It should not run out of the preallocated memory if adding a new generic
-     * error data entry
-     */
-    assert((data_length + ACPI_GHES_GESB_SIZE) <=
-            ACPI_GHES_MAX_RAW_DATA_LENGTH);
-
     ghes_gen_err_data_uncorrectable_recoverable(block, guid,
-                                                data_length);
+                                                ACPI_GHES_MAX_RAW_DATA_LENGTH);
 
     /* Build the memory section CPER for above new generic error data entry */
     acpi_ghes_build_append_mem_cper(block, physical_address);
Signature · 1 line
2.47.1
#28 lore raw

Re: [PATCH 27/31] DEBUG

In reply to Mauro Carvalho Chehab
Quoted 11 lines · Mauro Carvalho Chehab
---
 hw/acpi/ghes.c | 2 ++
 1 file changed, 2 insertions(+)
hw/acpi/ghes.c +0 -0
index abca351b18de..1fe4c536611a 100644

hw/acpi/ghes.c void ghes_record_cper_errors(const void *cper, size_t len, · line 537

Quoted 4 lines
hw/acpi/ghes.c +1 -0
@@ -534,9 +534,11 @@ void ghes_record_cper_errors(const void *cper, size_t len,
     ags = &acpi_ged_state->ghes_state;
 
     if (!ags->hest_lookup) {
+        fprintf(stderr,"Using old GHES lookup\n");

I don't like this. If you must please have them under #ifdef DEBUG or somesuch. See ich9.c

Quoted 10 lines
hw/acpi/ghes.c +1 -1
         get_hw_error_offsets(le64_to_cpu(ags->hw_error_le),
                              &cper_addr, &read_ack_register_addr);
     } else {
+        fprintf(stderr,"Using new HEST lookup\n");
         get_ghes_source_offsets(source_id, le64_to_cpu(ags->hest_addr_le),
                                 &cper_addr, &read_ack_register_addr, errp);
     }
--

2.47.1

#38 lore raw
Quoted 1 line · Markus Armbruster

This is v10, right?

Scratch that, the cover letter explains: "As agreed duing v10 review, I'll be splitting the big patch series into separate pull requests, starting with the cleanup series. This is the first patch set, containing only such preparation patches."

However, it doesn't apply for me. What's your base?

#29 lore raw

Re: [PATCH 27/31] DEBUG

In reply to Ani Sinha
Quoted 15 lines · Ani Sinha
Quoted 13 lines · Mauro Carvalho Chehab
---
 hw/acpi/ghes.c | 2 ++
 1 file changed, 2 insertions(+)
hw/acpi/ghes.c +0 -0
index abca351b18de..1fe4c536611a 100644
@@ -534,9 +534,11 @@ void ghes_record_cper_errors(const void *cper, size_t len,
     ags = &acpi_ged_state->ghes_state;
 
Quoted 5 lines

hw/acpi/ghes.c void ghes_record_cper_errors(const void *cper, size_t len, · line 537

Quoted 2 lines
hw/acpi/ghes.c +1 -0
     if (!ags->hest_lookup) {
+        fprintf(stderr,"Using old GHES lookup\n");

I don't like this. If you must please have them under #ifdef DEBUG or somesuch. See ich9.c

Judging from the subject line, it's not meant to be posted, let alone merged :)

Quoted 10 lines
Quoted 10 lines
hw/acpi/ghes.c +1 -1
         get_hw_error_offsets(le64_to_cpu(ags->hw_error_le),
                              &cper_addr, &read_ack_register_addr);
     } else {
+        fprintf(stderr,"Using new HEST lookup\n");
         get_ghes_source_offsets(source_id, le64_to_cpu(ags->hest_addr_le),
                                 &cper_addr, &read_ack_register_addr, errp);
     }
--

2.47.1

#30 lore raw

Re: [PATCH 27/31] DEBUG

In reply to Markus Armbruster

Em Sat, 07 Dec 2024 07:16:31 +0100
Markus Armbruster <[email protected]> escreveu:

Quoted 17 lines
Quoted 15 lines · Ani Sinha
Quoted 13 lines · Mauro Carvalho Chehab
---
 hw/acpi/ghes.c | 2 ++
 1 file changed, 2 insertions(+)
hw/acpi/ghes.c +0 -0
index abca351b18de..1fe4c536611a 100644
@@ -534,9 +534,11 @@ void ghes_record_cper_errors(const void *cper, size_t len,
     ags = &acpi_ged_state->ghes_state;
 
Quoted 8 lines
Quoted 5 lines

hw/acpi/ghes.c void ghes_record_cper_errors(const void *cper, size_t len, · line 537

Quoted 2 lines
hw/acpi/ghes.c +1 -0
     if (!ags->hest_lookup) {
+        fprintf(stderr,"Using old GHES lookup\n");  

I don't like this. If you must please have them under #ifdef DEBUG or somesuch. See ich9.c

Judging from the subject line, it's not meant to be posted, let alone merged :)

Sorry! Yea, this was not meant to be posted.

I ended submitting the entire pile of patches I have pending, including some patches I placed at the end to test that what method is used to calculate offsets (the one supported up to current QEMU version, which is limted, and the new one that uses backport logic).

I'll submit the right patches again. Please ignore this.

Regards,
Mauro

#39 lore raw
In reply to Markus Armbruster

Em Sat, 07 Dec 2024 07:15:19 +0100
Markus Armbruster <[email protected]> escreveu:

Quoted 8 lines
Quoted 1 line · Markus Armbruster

This is v10, right?

Scratch that, the cover letter explains: "As agreed duing v10 review, I'll be splitting the big patch series into separate pull requests, starting with the cleanup series. This is the first patch set, containing only such preparation patches."

Please scratch this series. It seems I picked the wrong git range, sending a lot more patches than intended.

Quoted 1 line

However, it doesn't apply for me. What's your base?

That's weird. Despite my mistake, the series is based on v9.2.0-rc3 (which was identical to master last time I rebased).

Should it be based against some other branch?

Thanks,
Mauro

#36 lore raw

Re: [PATCH 31/31] FIXME: acpi/ghes: properly set data record size

In reply to Markus Armbruster

Em Sat, 07 Dec 2024 07:17:42 +0100
Markus Armbruster <[email protected]> escreveu:

Quoted 2 lines

Another subject line that suggests this isn't fully baked. Respin to reduce confusion?

The last 3 patches on this series were purely to debug some things, and aren't meant to be submitted. This particular one is just a potential future cleanup. The FIXME there is just to remind me that I would need to double check it, and provide a better description when submitting it again.

Thanks,
Mauro

#40 lore raw
In reply to Mauro Carvalho Chehab

Mauro Carvalho Chehab <[email protected]> writes:

[...]

Quoted 4 lines
Quoted 1 line

However, it doesn't apply for me. What's your base?

That's weird. Despite my mistake, the series is based on v9.2.0-rc3 (which was identical to master last time I rebased).

Either something conflicting got committed meanwhile, or I screwed up somehow.

Quoted 1 line

Should it be based against some other branch?

No, master is fine.