Skip to contentSkip to conversation

Change ghes to use HEST-based offsets and add support for error inject

PATCH Superseded Mauro Carvalho Chehab 2 participants 34 messages Feb 21, 2025 – Feb 27, 2025

Subsystems (2)

v4 of 12 Superseded Latest is v12 →

lore
Share & tools
lore
#1 lore raw

PATCH v4 1/14 acpi/ghes: prepare to change the way HEST offsets are calculated

In reply to Mauro Carvalho Chehab

Add a new ags flag to change the way HEST offsets are calculated. Currently, offsets needed to store ACPI HEST offsets and read ack are calculated based on a previous knowledge from the logic which creates the HEST table.

Such logic is not generic, not allowing to easily add more HEST entries nor replicates what OSPM does.

As the next patches will be adding a more generic logic, add a new use_hest_addr, set to false, in preparation for such changes.

---
 hw/acpi/ghes.c           | 46 ++++++++++++++++++++++++----------------
 hw/arm/virt-acpi-build.c | 15 ++++++++++---
 include/hw/acpi/ghes.h   | 14 ++++++++++--
 3 files changed, 52 insertions(+), 23 deletions(-)
hw/acpi/ghes.c +28 -18
index b709c177cdea..e49a03fdb94e 100644
@@ -206,7 +206,8 @@ ghes_gen_err_data_uncorrectable_recoverable(GArray *block,
  * Initialize "etc/hardware_errors" and "etc/hardware_errors_addr" fw_cfg blobs.
  * See docs/specs/acpi_hest_ghes.rst for blobs format.
  */
-static void build_ghes_error_table(GArray *hardware_errors, BIOSLinker *linker)
+static void build_ghes_error_table(AcpiGhesState *ags, GArray *hardware_errors,
+                                   BIOSLinker *linker)
 {
     int i, error_status_block_offset;
 
@@ -251,13 +252,15 @@ static void build_ghes_error_table(GArray *hardware_errors, BIOSLinker *linker)
                                        i * ACPI_GHES_MAX_RAW_DATA_LENGTH);
     }
 
-    /*
-     * tell firmware to write hardware_errors GPA into
-     * hardware_errors_addr fw_cfg, once the former has been initialized.
-     */
-    bios_linker_loader_write_pointer(linker, ACPI_HW_ERROR_ADDR_FW_CFG_FILE, 0,
-                                     sizeof(uint64_t),
-                                     ACPI_HW_ERROR_FW_CFG_FILE, 0);
+    if (!ags->use_hest_addr) {
+        /*
+         * Tell firmware to write hardware_errors GPA into
+         * hardware_errors_addr fw_cfg, once the former has been initialized.
+         */
+        bios_linker_loader_write_pointer(linker, ACPI_HW_ERROR_ADDR_FW_CFG_FILE,
+                                         0, sizeof(uint64_t),
+                                         ACPI_HW_ERROR_FW_CFG_FILE, 0);
+    }
 }
 
 /* Build Generic Hardware Error Source version 2 (GHESv2) */
@@ -331,14 +334,15 @@ static void build_ghes_v2(GArray *table_data,
 }
 
 /* Build Hardware Error Source Table */
-void acpi_build_hest(GArray *table_data, GArray *hardware_errors,
+void acpi_build_hest(AcpiGhesState *ags, GArray *table_data,
+                     GArray *hardware_errors,
                      BIOSLinker *linker,
                      const char *oem_id, const char *oem_table_id)
 {
     AcpiTable table = { .sig = "HEST", .rev = 1,
                         .oem_id = oem_id, .oem_table_id = oem_table_id };
 
-    build_ghes_error_table(hardware_errors, linker);
+    build_ghes_error_table(ags, hardware_errors, linker);
 
     acpi_table_begin(&table, table_data);
 
@@ -357,11 +361,11 @@ void acpi_ghes_add_fw_cfg(AcpiGhesState *ags, FWCfgState *s,
     fw_cfg_add_file(s, ACPI_HW_ERROR_FW_CFG_FILE, hardware_error->data,
                     hardware_error->len);
 
-    /* Create a read-write fw_cfg file for Address */
-    fw_cfg_add_file_callback(s, ACPI_HW_ERROR_ADDR_FW_CFG_FILE, NULL, NULL,
-        NULL, &(ags->hw_error_le), sizeof(ags->hw_error_le), false);
-
-    ags->present = true;
+    if (!ags->use_hest_addr) {
+        /* Create a read-write fw_cfg file for Address */
+        fw_cfg_add_file_callback(s, ACPI_HW_ERROR_ADDR_FW_CFG_FILE, NULL, NULL,
+            NULL, &(ags->hw_error_le), sizeof(ags->hw_error_le), false);
+    }
 }
 
 static void get_hw_error_offsets(uint64_t ghes_addr,
@@ -411,8 +415,11 @@ void ghes_record_cper_errors(const void *cper, size_t len,
     ags = &acpi_ged_state->ghes_state;
 
     assert(ACPI_GHES_ERROR_SOURCE_COUNT == 1);
-    get_hw_error_offsets(le64_to_cpu(ags->hw_error_le),
-                         &cper_addr, &read_ack_register_addr);
+
+    if (!ags->use_hest_addr) {
+        get_hw_error_offsets(le64_to_cpu(ags->hw_error_le),
+                             &cper_addr, &read_ack_register_addr);
+    }
 
     if (!cper_addr) {
         error_setg(errp, "can not find Generic Error Status Block");
@@ -494,5 +501,8 @@ bool acpi_ghes_present(void)
         return false;
     }
     ags = &acpi_ged_state->ghes_state;
-    return ags->present;
+    if (!ags->hw_error_le)
+        return false;
+
+    return true;
 }
hw/arm/virt-acpi-build.c +12 -3
index 3ac8f8e17861..8ab8d11b6536 100644
@@ -946,9 +946,18 @@ void virt_acpi_build(VirtMachineState *vms, AcpiBuildTables *tables)
     build_dbg2(tables_blob, tables->linker, vms);
 
     if (vms->ras) {
-        acpi_add_table(table_offsets, tables_blob);
-        acpi_build_hest(tables_blob, tables->hardware_errors, tables->linker,
-                        vms->oem_id, vms->oem_table_id);
+        AcpiGedState *acpi_ged_state;
+        AcpiGhesState *ags;
+
+        acpi_ged_state = ACPI_GED(object_resolve_path_type("", TYPE_ACPI_GED,
+                                                       NULL));
+        if (acpi_ged_state) {
+            ags = &acpi_ged_state->ghes_state;
+
+            acpi_add_table(table_offsets, tables_blob);
+            acpi_build_hest(ags, tables_blob, tables->hardware_errors,
+                            tables->linker, vms->oem_id, vms->oem_table_id);
+        }
     }
 
     if (ms->numa_state->num_nodes > 0) {
include/hw/acpi/ghes.h +12 -2
index 39619a2457cb..a3d62b96584f 100644
@@ -64,12 +64,22 @@ enum {
     ACPI_GHES_ERROR_SOURCE_COUNT
 };
 
+/*
+ * AcpiGhesState stores an offset that will be used to fill HEST entries.
+ *
+ * When use_hest_addr is false, the stored offset is placed at hw_error_le,
+ * meaning an offset from the etc/hardware_errors firmware address. This
+ * is the default on QEMU 9.x.
+ *
+ * An offset value equal to zero means that GHES is not present.
+ */
 typedef struct AcpiGhesState {
     uint64_t hw_error_le;
-    bool present; /* True if GHES is present at all on this board */
+    bool use_hest_addr;         /* Currently, always false */
 } AcpiGhesState;
 
-void acpi_build_hest(GArray *table_data, GArray *hardware_errors,
+void acpi_build_hest(AcpiGhesState *ags, GArray *table_data,
+                     GArray *hardware_errors,
                      BIOSLinker *linker,
                      const char *oem_id, const char *oem_table_id);
 void acpi_ghes_add_fw_cfg(AcpiGhesState *vms, FWCfgState *s,
Signature · 1 line
2.48.1
#5 lore raw

PATCH v4 2/14 acpi/ghes: add a firmware file with HEST address

In reply to Mauro Carvalho Chehab

Store HEST table address at GPA, placing its the start of the table at hest_addr_le variable.

---
 hw/acpi/ghes.c         | 22 ++++++++++++++++++++--
 include/hw/acpi/ghes.h |  7 ++++++-
 2 files changed, 26 insertions(+), 3 deletions(-)
hw/acpi/ghes.c +20 -2
index e49a03fdb94e..ba37be9e7022 100644
@@ -30,6 +30,7 @@
 
 #define ACPI_HW_ERROR_FW_CFG_FILE           "etc/hardware_errors"
 #define ACPI_HW_ERROR_ADDR_FW_CFG_FILE      "etc/hardware_errors_addr"
+#define ACPI_HEST_ADDR_FW_CFG_FILE          "etc/acpi_table_hest_addr"
 
 /* The max size in bytes for one error block */
 #define ACPI_GHES_MAX_RAW_DATA_LENGTH   (1 * KiB)
@@ -341,6 +342,9 @@ void acpi_build_hest(AcpiGhesState *ags, GArray *table_data,
 {
     AcpiTable table = { .sig = "HEST", .rev = 1,
                         .oem_id = oem_id, .oem_table_id = oem_table_id };
+    uint32_t hest_offset;
+
+    hest_offset = table_data->len;
 
     build_ghes_error_table(ags, hardware_errors, linker);
 
@@ -352,6 +356,17 @@ void acpi_build_hest(AcpiGhesState *ags, GArray *table_data,
                   ACPI_GHES_NOTIFY_SEA, ACPI_HEST_SRC_ID_SEA);
 
     acpi_table_end(linker, &table);
+
+    if (ags->use_hest_addr) {
+        /*
+         * Tell firmware to write into GPA the address of HEST via fw_cfg,
+         * once initialized.
+         */
+        bios_linker_loader_write_pointer(linker,
+                                         ACPI_HEST_ADDR_FW_CFG_FILE, 0,
+                                         sizeof(uint64_t),
+                                         ACPI_BUILD_TABLE_FILE, hest_offset);
+    }
 }
 
 void acpi_ghes_add_fw_cfg(AcpiGhesState *ags, FWCfgState *s,
@@ -361,7 +376,10 @@ void acpi_ghes_add_fw_cfg(AcpiGhesState *ags, FWCfgState *s,
     fw_cfg_add_file(s, ACPI_HW_ERROR_FW_CFG_FILE, hardware_error->data,
                     hardware_error->len);
 
-    if (!ags->use_hest_addr) {
+    if (ags->use_hest_addr) {
+        fw_cfg_add_file_callback(s, ACPI_HEST_ADDR_FW_CFG_FILE, NULL, NULL,
+            NULL, &(ags->hest_addr_le), sizeof(ags->hest_addr_le), false);
+    } else {
         /* Create a read-write fw_cfg file for Address */
         fw_cfg_add_file_callback(s, ACPI_HW_ERROR_ADDR_FW_CFG_FILE, NULL, NULL,
             NULL, &(ags->hw_error_le), sizeof(ags->hw_error_le), false);
@@ -501,7 +519,7 @@ bool acpi_ghes_present(void)
         return false;
     }
     ags = &acpi_ged_state->ghes_state;
-    if (!ags->hw_error_le)
+    if (!ags->hw_error_le && !ags->hest_addr_le)
         return false;
 
     return true;
include/hw/acpi/ghes.h +6 -1
index a3d62b96584f..454e97b5341c 100644
@@ -71,9 +71,14 @@ enum {
  * meaning an offset from the etc/hardware_errors firmware address. This
  * is the default on QEMU 9.x.
  *
- * An offset value equal to zero means that GHES is not present.
+ * When use_hest_addr is true, the stored offset is placed at hest_addr_le,
+ * meaning an offset from theHEST table address from etc/acpi/tables firmware.
+ * This is the default for QEMU 10.x and above.
+ *
+ * If both offset values are equal to zero, it means that GHES is not present.
  */
 typedef struct AcpiGhesState {
+    uint64_t hest_addr_le;
     uint64_t hw_error_le;
     bool use_hest_addr;         /* Currently, always false */
 } AcpiGhesState;
Signature · 1 line
2.48.1
#11 lore raw

PATCH v4 5/14 acpi/ghes: add a notifier to notify when error data is ready

In reply to Mauro Carvalho Chehab

Some error injection notify methods are async, like GPIO notify. Add a notifier to be used when the error record is ready to be sent to the guest OS.

---
 hw/acpi/ghes.c         | 5 ++++-
 include/hw/acpi/ghes.h | 3 +++
 2 files changed, 7 insertions(+), 1 deletion(-)
hw/acpi/ghes.c +4 -1
index 4a4ea8f4be90..f2d1cc7369f4 100644
@@ -514,6 +514,9 @@ static void get_ghes_source_offsets(uint16_t source_id,
     *read_ack_start_addr = le64_to_cpu(*read_ack_start_addr);
 }
 
+NotifierList acpi_generic_error_notifiers =
+    NOTIFIER_LIST_INITIALIZER(error_device_notifiers);
+
 void ghes_record_cper_errors(const void *cper, size_t len,
                              uint16_t source_id, Error **errp)
 {
@@ -570,7 +573,7 @@ void ghes_record_cper_errors(const void *cper, size_t len,
     /* Write the generic error data entry into guest memory */
     cpu_physical_memory_write(cper_addr, cper, len);
 
-    return;
+    notifier_list_notify(&acpi_generic_error_notifiers, NULL);
 }
 
 int acpi_ghes_memory_errors(uint16_t source_id, uint64_t physical_address)
include/hw/acpi/ghes.h +3 -0
index 51c6b6b33327..219aa7ab4fe0 100644
@@ -24,6 +24,9 @@
 
 #include "hw/acpi/bios-linker-loader.h"
 #include "qapi/error.h"
+#include "qemu/notify.h"
+
+extern NotifierList acpi_generic_error_notifiers;
 
 /*
  * Values for Hardware Error Notification Type field
Signature · 1 line
2.48.1
#20 lore raw

PATCH v4 9/14 acpi/generic_event_device: add an APEI error device

In reply to Mauro Carvalho Chehab

Adds a generic error device to handle generic hardware error events as specified at ACPI 6.5 specification at 18.3.2.7.2:
https://uefi.org/specs/ACPI/6.5/18_Platform_Error_Interfaces.html#event-notification-for-generic-error-sources
using HID PNP0C33.

The PNP0C33 device is used to report hardware errors to the guest via ACPI APEI Generic Hardware Error Source (GHES).

---
 hw/acpi/aml-build.c                    | 10 ++++++++++
 hw/acpi/generic_event_device.c         | 13 +++++++++++++
 include/hw/acpi/acpi_dev_interface.h   |  1 +
 include/hw/acpi/aml-build.h            |  2 ++
 include/hw/acpi/generic_event_device.h |  1 +
 5 files changed, 27 insertions(+)
hw/acpi/aml-build.c +10 -0
index f8f93a9f66c8..e4bd7b611372 100644
@@ -2614,3 +2614,13 @@ Aml *aml_i2c_serial_bus_device(uint16_t address, const char *resource_source)
 
     return var;
 }
+
+/* ACPI 5.0b: 18.3.2.6.2 Event Notification For Generic Error Sources */
+Aml *aml_error_device(void)
+{
+    Aml *dev = aml_device(ACPI_APEI_ERROR_DEVICE);
+    aml_append(dev, aml_name_decl("_HID", aml_string("PNP0C33")));
+    aml_append(dev, aml_name_decl("_UID", aml_int(0)));
+
+    return dev;
+}
hw/acpi/generic_event_device.c +13 -0
index 14d8513a5440..180eebbce1cd 100644
@@ -26,6 +26,7 @@ static const uint32_t ged_supported_events[] = {
     ACPI_GED_PWR_DOWN_EVT,
     ACPI_GED_NVDIMM_HOTPLUG_EVT,
     ACPI_GED_CPU_HOTPLUG_EVT,
+    ACPI_GED_ERROR_EVT,
 };
 
 /*
@@ -116,6 +117,16 @@ void build_ged_aml(Aml *table, const char *name, HotplugHandler *hotplug_dev,
                            aml_notify(aml_name(ACPI_POWER_BUTTON_DEVICE),
                                       aml_int(0x80)));
                 break;
+            case ACPI_GED_ERROR_EVT:
+                /*
+                 * ACPI 5.0b: 5.6.6 Device Object Notifications
+                 * Table 5-135 Error Device Notification Values
+                 * Defines 0x80 as the value to be used on notifications
+                 */
+                aml_append(if_ctx,
+                           aml_notify(aml_name(ACPI_APEI_ERROR_DEVICE),
+                                      aml_int(0x80)));
+                break;
             case ACPI_GED_NVDIMM_HOTPLUG_EVT:
                 aml_append(if_ctx,
                            aml_notify(aml_name("\\_SB.NVDR"),
@@ -295,6 +306,8 @@ static void acpi_ged_send_event(AcpiDeviceIf *adev, AcpiEventStatusBits ev)
         sel = ACPI_GED_MEM_HOTPLUG_EVT;
     } else if (ev & ACPI_POWER_DOWN_STATUS) {
         sel = ACPI_GED_PWR_DOWN_EVT;
+    } else if (ev & ACPI_GENERIC_ERROR) {
+        sel = ACPI_GED_ERROR_EVT;
     } else if (ev & ACPI_NVDIMM_HOTPLUG_STATUS) {
         sel = ACPI_GED_NVDIMM_HOTPLUG_EVT;
     } else if (ev & ACPI_CPU_HOTPLUG_STATUS) {
include/hw/acpi/acpi_dev_interface.h +1 -0
index 68d9d15f50aa..8294f8f0ccca 100644
@@ -13,6 +13,7 @@ typedef enum {
     ACPI_NVDIMM_HOTPLUG_STATUS = 16,
     ACPI_VMGENID_CHANGE_STATUS = 32,
     ACPI_POWER_DOWN_STATUS = 64,
+    ACPI_GENERIC_ERROR = 128,
 } AcpiEventStatusBits;
 
 #define TYPE_ACPI_DEVICE_IF "acpi-device-interface"
include/hw/acpi/aml-build.h +2 -0
index c18f68134246..f38e12971932 100644
@@ -252,6 +252,7 @@ struct CrsRangeSet {
 /* Consumer/Producer */
 #define AML_SERIAL_BUS_FLAG_CONSUME_ONLY        (1 << 1)
 
+#define ACPI_APEI_ERROR_DEVICE   "GEDD"
 /**
  * init_aml_allocator:
  *
@@ -382,6 +383,7 @@ Aml *aml_dma(AmlDmaType typ, AmlDmaBusMaster bm, AmlTransferSize sz,
              uint8_t channel);
 Aml *aml_sleep(uint64_t msec);
 Aml *aml_i2c_serial_bus_device(uint16_t address, const char *resource_source);
+Aml *aml_error_device(void);
 
 /* Block AML object primitives */
 Aml *aml_scope(const char *name_format, ...) G_GNUC_PRINTF(1, 2);
include/hw/acpi/generic_event_device.h +1 -0
index d2dac87b4a9f..1c18ac296fcb 100644
@@ -101,6 +101,7 @@ OBJECT_DECLARE_SIMPLE_TYPE(AcpiGedState, ACPI_GED)
 #define ACPI_GED_PWR_DOWN_EVT      0x2
 #define ACPI_GED_NVDIMM_HOTPLUG_EVT 0x4
 #define ACPI_GED_CPU_HOTPLUG_EVT    0x8
+#define ACPI_GED_ERROR_EVT          0x10
 
 typedef struct GEDState {
     MemoryRegion evt;
Signature · 1 line
2.48.1
#21 lore raw

PATCH v4 10/14 tests/acpi: virt: allow acpi table changes for a new table: HEST

In reply to Mauro Carvalho Chehab

The DSDT table will also be affected by such change.

---
 tests/qtest/bios-tables-test-allowed-diff.h | 1 +
 1 file changed, 1 insertion(+)
tests/qtest/bios-tables-test-allowed-diff.h +1 -0
index dfb8523c8bf4..1a4c2277bd5a 100644
@@ -1 +1,2 @@
 /* List of comma-separated changed AML files to ignore */
+"tests/data/acpi/aarch64/virt/DSDT",
Signature · 1 line
2.48.1
#0 lore raw

v4 cover Change ghes to use HEST-based offsets and add support for error inject

Now that the ghes preparation patches were merged, let's add support for error injection.

On this series, the first 6 patches chang to the math used to calculate offsets at HEST table and hardware_error firmware file, together with its migration code. Migration tested with both latest QEMU released kernel and upstream, on both directions.

The next patches add a new QAPI to allow injecting GHESv2 errors, and a script using such QAPI
to inject ARM Processor Error records.

---
v4:
- added an extra comment for AcpiGhesState structure;
- patches reordered;
- no functional changes, just code shift between the patches in this series.

v3:
- addressed more nits;
- hest_add_le now points to the beginning of HEST table;
- removed HEST from tests/data/acpi;
- added an extra patch to not use fw_cfg with virt-10.0 for hw_error_le

v2:
- address some nits;
- improved ags cleanup patch and removed ags.present field;
- added some missing le*_to_cpu() calls;
- update date at copyright for new files to 2024-2025;
- qmp command changed to: inject-ghes-v2-error ans since updated to 10.0;
- added HEST and DSDT tables after the changes to make check target happy. (two patches: first one whitelisting such tables; second one removing from whitelist and updating/adding such tables to tests/data/acpi)

Mauro Carvalho Chehab (14):
acpi/ghes: prepare to change the way HEST offsets are calculated acpi/ghes: add a firmware file with HEST address acpi/ghes: Use HEST table offsets when preparing GHES records acpi/ghes: don't hard-code the number of sources for HEST table acpi/ghes: add a notifier to notify when error data is ready acpi/ghes: create an ancillary acpi_ghes_get_state() function acpi/generic_event_device: Update GHES migration to cover hest addr acpi/generic_event_device: add logic to detect if HEST addr is
available
acpi/generic_event_device: add an APEI error device tests/acpi: virt: allow acpi table changes for a new table: HEST arm/virt: Wire up a GED error device for ACPI / GHES tests/acpi: virt: add a HEST table to aarch64 virt and update DSDT qapi/acpi-hest: add an interface to do generic CPER error injection scripts/ghes_inject: add a script to generate GHES error inject

 MAINTAINERS                                   |  10 +
 hw/acpi/Kconfig                               |   5 +
 hw/acpi/aml-build.c                           |  10 +
 hw/acpi/generic_event_device.c                |  43 ++
 hw/acpi/ghes-stub.c                           |   7 +-
 hw/acpi/ghes.c                                | 231 ++++--
 hw/acpi/ghes_cper.c                           |  38 +
 hw/acpi/ghes_cper_stub.c                      |  19 +
 hw/acpi/meson.build                           |   2 +
 hw/arm/virt-acpi-build.c                      |  37 +-
 hw/arm/virt.c                                 |  19 +-
 hw/core/machine.c                             |   2 +
 include/hw/acpi/acpi_dev_interface.h          |   1 +
 include/hw/acpi/aml-build.h                   |   2 +
 include/hw/acpi/generic_event_device.h        |   1 +
 include/hw/acpi/ghes.h                        |  54 +-
 include/hw/arm/virt.h                         |   2 +
 qapi/acpi-hest.json                           |  35 +
 qapi/meson.build                              |   1 +
 qapi/qapi-schema.json                         |   1 +
 scripts/arm_processor_error.py                | 476 ++++++++++++
 scripts/ghes_inject.py                        |  51 ++
 scripts/qmp_helper.py                         | 702 ++++++++++++++++++
 target/arm/kvm.c                              |   7 +-
 tests/data/acpi/aarch64/virt/DSDT             | Bin 5196 -> 5240 bytes
 .../data/acpi/aarch64/virt/DSDT.acpihmatvirt  | Bin 5282 -> 5326 bytes
 tests/data/acpi/aarch64/virt/DSDT.memhp       | Bin 6557 -> 6601 bytes
 tests/data/acpi/aarch64/virt/DSDT.pxb         | Bin 7679 -> 7723 bytes
 tests/data/acpi/aarch64/virt/DSDT.topology    | Bin 5398 -> 5442 bytes
 29 files changed, 1677 insertions(+), 79 deletions(-)
 create mode 100644 hw/acpi/ghes_cper.c
 create mode 100644 hw/acpi/ghes_cper_stub.c
 create mode 100644 qapi/acpi-hest.json
 create mode 100644 scripts/arm_processor_error.py
 create mode 100755 scripts/ghes_inject.py
 create mode 100755 scripts/qmp_helper.py
Signature · 1 line
2.48.1
#7 lore raw

PATCH v4 3/14 acpi/ghes: Use HEST table offsets when preparing GHES records

There are two pointers that are needed during error injection:

1. The start address of the CPER block to be stored;
2. The address of the ack.

It is preferable to calculate them from the HEST table. This allows checking the source ID, the size of the table and the type of the HEST error block structures.

Yet, keep the old code, as this is needed for migration purposes.

---
 hw/acpi/ghes.c         | 100 +++++++++++++++++++++++++++++++++++++++++
 include/hw/acpi/ghes.h |   2 +-
 2 files changed, 101 insertions(+), 1 deletion(-)
hw/acpi/ghes.c +100 -0
index ba37be9e7022..7efea519f766 100644
@@ -41,6 +41,12 @@
 /* Address offset in Generic Address Structure(GAS) */
 #define GAS_ADDR_OFFSET 4
 
+/*
+ * ACPI spec 1.0b
+ * 5.2.3 System Description Table Header
+ */
+#define ACPI_DESC_HEADER_OFFSET     36
+
 /*
  * The total size of Generic Error Data Entry
  * ACPI 6.1/6.2: 18.3.2.7.1 Generic Error Data,
@@ -61,6 +67,30 @@
  */
 #define ACPI_GHES_GESB_SIZE                 20
 
+/*
+ * See the memory layout map at docs/specs/acpi_hest_ghes.rst.
+ */
+
+/*
+ * ACPI 6.1: 18.3.2.8 Generic Hardware Error Source version 2
+ * Table 18-344 Generic Hardware Error Source version 2 (GHESv2) Structure
+ */
+#define HEST_GHES_V2_ENTRY_SIZE  92
+
+/*
+ * ACPI 6.1: 18.3.2.7: Generic Hardware Error Source
+ * Table 18-344 Generic Hardware Error Source version 2 (GHESv2) Structure
+ * Read Ack Register
+ */
+#define GHES_READ_ACK_ADDR_OFF          64
+
+/*
+ * ACPI 6.1: 18.3.2.7: Generic Hardware Error Source
+ * Table 18-341 Generic Hardware Error Source Structure
+ * Error Status Address
+ */
+#define GHES_ERR_STATUS_ADDR_OFF  20
+
 /*
  * Values for error_severity field
  */
@@ -412,6 +442,73 @@ static void get_hw_error_offsets(uint64_t ghes_addr,
     *read_ack_register_addr = ghes_addr + sizeof(uint64_t);
 }
 
+static void get_ghes_source_offsets(uint16_t source_id,
+                                    uint64_t hest_addr,
+                                    uint64_t *cper_addr,
+                                    uint64_t *read_ack_start_addr,
+                                    Error **errp)
+{
+    uint64_t hest_err_block_addr, hest_read_ack_addr;
+    uint64_t err_source_entry, error_block_addr;
+    uint32_t num_sources, i;
+
+    hest_addr += ACPI_DESC_HEADER_OFFSET;
+
+    cpu_physical_memory_read(hest_addr, &num_sources,
+                             sizeof(num_sources));
+    num_sources = le32_to_cpu(num_sources);
+
+    err_source_entry = hest_addr + sizeof(num_sources);
+
+    /*
+     * Currently, HEST Error source navigates only for GHESv2 tables
+     */
+    for (i = 0; i < num_sources; i++) {
+        uint64_t addr = err_source_entry;
+        uint16_t type, src_id;
+
+        cpu_physical_memory_read(addr, &type, sizeof(type));
+        type = le16_to_cpu(type);
+
+        /* For now, we only know the size of GHESv2 table */
+        if (type != ACPI_GHES_SOURCE_GENERIC_ERROR_V2) {
+            error_setg(errp, "HEST: type %d not supported.", type);
+            return;
+        }
+
+        /* Compare CPER source address at the GHESv2 structure */
+        addr += sizeof(type);
+        cpu_physical_memory_read(addr, &src_id, sizeof(src_id));
+        if (le16_to_cpu(src_id) == source_id) {
+            break;
+        }
+
+        err_source_entry += HEST_GHES_V2_ENTRY_SIZE;
+    }
+    if (i == num_sources) {
+        error_setg(errp, "HEST: Source %d not found.", source_id);
+        return;
+    }
+
+    /* Navigate though table address pointers */
+    hest_err_block_addr = err_source_entry + GHES_ERR_STATUS_ADDR_OFF +
+                          GAS_ADDR_OFFSET;
+
+    cpu_physical_memory_read(hest_err_block_addr, &error_block_addr,
+                             sizeof(error_block_addr));
+    error_block_addr = le64_to_cpu(error_block_addr);
+
+    cpu_physical_memory_read(error_block_addr, cper_addr,
+                             sizeof(*cper_addr));
+    *cper_addr = le64_to_cpu(*cper_addr);
+
+    hest_read_ack_addr = err_source_entry + GHES_READ_ACK_ADDR_OFF +
+                         GAS_ADDR_OFFSET;
+    cpu_physical_memory_read(hest_read_ack_addr, read_ack_start_addr,
+                             sizeof(*read_ack_start_addr));
+    *read_ack_start_addr = le64_to_cpu(*read_ack_start_addr);
+}
+
 void ghes_record_cper_errors(const void *cper, size_t len,
                              uint16_t source_id, Error **errp)
 {
@@ -437,6 +534,9 @@ void ghes_record_cper_errors(const void *cper, size_t len,
     if (!ags->use_hest_addr) {
         get_hw_error_offsets(le64_to_cpu(ags->hw_error_le),
                              &cper_addr, &read_ack_register_addr);
+    } else {
+        get_ghes_source_offsets(source_id, le64_to_cpu(ags->hest_addr_le),
+                                &cper_addr, &read_ack_register_addr, errp);
     }
 
     if (!cper_addr) {
include/hw/acpi/ghes.h +1 -1
index 454e97b5341c..2f06e433ce04 100644
@@ -80,7 +80,7 @@ enum {
 typedef struct AcpiGhesState {
     uint64_t hest_addr_le;
     uint64_t hw_error_le;
-    bool use_hest_addr;         /* Currently, always false */
+    bool use_hest_addr; /* True if HEST address is present */
 } AcpiGhesState;
 
 void acpi_build_hest(AcpiGhesState *ags, GArray *table_data,
Signature · 1 line
2.48.1
#9 lore raw

PATCH v4 4/14 acpi/ghes: don't hard-code the number of sources for HEST table

In reply to Mauro Carvalho Chehab

The current code is actually dependent on having just one error structure with a single source, as any change there would cause migration issues.

As the number of sources should be arch-dependent, as it will depend on what kind of notifications will exist, and how many errors can be reported at the same time, change the logic to be more flexible, allowing the number of sources to be defined when building the HEST table by the caller.

---
 hw/acpi/ghes.c           | 38 +++++++++++++++++++++-----------------
 hw/arm/virt-acpi-build.c |  8 +++++++-
 include/hw/acpi/ghes.h   | 17 ++++++++++++-----
 3 files changed, 40 insertions(+), 23 deletions(-)
hw/acpi/ghes.c +21 -17
index 7efea519f766..4a4ea8f4be90 100644
@@ -238,17 +238,17 @@ ghes_gen_err_data_uncorrectable_recoverable(GArray *block,
  * See docs/specs/acpi_hest_ghes.rst for blobs format.
  */
 static void build_ghes_error_table(AcpiGhesState *ags, GArray *hardware_errors,
-                                   BIOSLinker *linker)
+                                   BIOSLinker *linker, int num_sources)
 {
     int i, error_status_block_offset;
 
     /* Build error_block_address */
-    for (i = 0; i < ACPI_GHES_ERROR_SOURCE_COUNT; i++) {
+    for (i = 0; i < num_sources; i++) {
         build_append_int_noprefix(hardware_errors, 0, sizeof(uint64_t));
     }
 
     /* Build read_ack_register */
-    for (i = 0; i < ACPI_GHES_ERROR_SOURCE_COUNT; i++) {
+    for (i = 0; i < num_sources; i++) {
         /*
          * Initialize the value of read_ack_register to 1, so GHES can be
          * writable after (re)boot.
@@ -263,13 +263,13 @@ static void build_ghes_error_table(AcpiGhesState *ags, GArray *hardware_errors,
 
     /* Reserve space for Error Status Data Block */
     acpi_data_push(hardware_errors,
-        ACPI_GHES_MAX_RAW_DATA_LENGTH * ACPI_GHES_ERROR_SOURCE_COUNT);
+        ACPI_GHES_MAX_RAW_DATA_LENGTH * num_sources);
 
     /* Tell guest firmware to place hardware_errors blob into RAM */
     bios_linker_loader_alloc(linker, ACPI_HW_ERROR_FW_CFG_FILE,
                              hardware_errors, sizeof(uint64_t), false);
 
-    for (i = 0; i < ACPI_GHES_ERROR_SOURCE_COUNT; i++) {
+    for (i = 0; i < num_sources; i++) {
         /*
          * Tell firmware to patch error_block_address entries to point to
          * corresponding "Generic Error Status Block"
@@ -295,12 +295,14 @@ static void build_ghes_error_table(AcpiGhesState *ags, GArray *hardware_errors,
 }
 
 /* Build Generic Hardware Error Source version 2 (GHESv2) */
-static void build_ghes_v2(GArray *table_data,
-                          BIOSLinker *linker,
-                          enum AcpiGhesNotifyType notify,
-                          uint16_t source_id)
+static void build_ghes_v2_entry(GArray *table_data,
+                                BIOSLinker *linker,
+                                const AcpiNotificationSourceId *notif_src,
+                                uint16_t index, int num_sources)
 {
     uint64_t address_offset;
+    const uint16_t notify = notif_src->notify;
+    const uint16_t source_id = notif_src->source_id;
 
     /*
      * Type:
@@ -331,7 +333,7 @@ static void build_ghes_v2(GArray *table_data,
                                    address_offset + GAS_ADDR_OFFSET,
                                    sizeof(uint64_t),
                                    ACPI_HW_ERROR_FW_CFG_FILE,
-                                   source_id * sizeof(uint64_t));
+                                   index * sizeof(uint64_t));
 
     /* Notification Structure */
     build_ghes_hw_error_notification(table_data, notify);
@@ -351,8 +353,7 @@ static void build_ghes_v2(GArray *table_data,
                                    address_offset + GAS_ADDR_OFFSET,
                                    sizeof(uint64_t),
                                    ACPI_HW_ERROR_FW_CFG_FILE,
-                                   (ACPI_GHES_ERROR_SOURCE_COUNT + source_id)
-                                   * sizeof(uint64_t));
+                                   (num_sources + index) * sizeof(uint64_t));
 
     /*
      * Read Ack Preserve field
@@ -368,22 +369,26 @@ static void build_ghes_v2(GArray *table_data,
 void acpi_build_hest(AcpiGhesState *ags, GArray *table_data,
                      GArray *hardware_errors,
                      BIOSLinker *linker,
+                     const AcpiNotificationSourceId *notif_source,
+                     int num_sources,
                      const char *oem_id, const char *oem_table_id)
 {
     AcpiTable table = { .sig = "HEST", .rev = 1,
                         .oem_id = oem_id, .oem_table_id = oem_table_id };
     uint32_t hest_offset;
+    int i;
 
     hest_offset = table_data->len;
 
-    build_ghes_error_table(ags, hardware_errors, linker);
+    build_ghes_error_table(ags, hardware_errors, linker, num_sources);
 
     acpi_table_begin(&table, table_data);
 
     /* Error Source Count */
-    build_append_int_noprefix(table_data, ACPI_GHES_ERROR_SOURCE_COUNT, 4);
-    build_ghes_v2(table_data, linker,
-                  ACPI_GHES_NOTIFY_SEA, ACPI_HEST_SRC_ID_SEA);
+    build_append_int_noprefix(table_data, num_sources, 4);
+    for (i = 0; i < num_sources; i++) {
+        build_ghes_v2_entry(table_data, linker, &notif_source[i], i, num_sources);
+    }
 
     acpi_table_end(linker, &table);
 
@@ -529,7 +534,6 @@ void ghes_record_cper_errors(const void *cper, size_t len,
     }
     ags = &acpi_ged_state->ghes_state;
 
-    assert(ACPI_GHES_ERROR_SOURCE_COUNT == 1);
 
     if (!ags->use_hest_addr) {
         get_hw_error_offsets(le64_to_cpu(ags->hw_error_le),
hw/arm/virt-acpi-build.c +7 -1
index 8ab8d11b6536..4439252e1a75 100644
@@ -893,6 +893,10 @@ static void acpi_align_size(GArray *blob, unsigned align)
     g_array_set_size(blob, ROUND_UP(acpi_data_len(blob), align));
 }
 
+static const AcpiNotificationSourceId hest_ghes_notify[] = {
+    { ACPI_HEST_SRC_ID_SYNC, ACPI_GHES_NOTIFY_SEA },
+};
+
 static
 void virt_acpi_build(VirtMachineState *vms, AcpiBuildTables *tables)
 {
@@ -956,7 +960,9 @@ void virt_acpi_build(VirtMachineState *vms, AcpiBuildTables *tables)
 
             acpi_add_table(table_offsets, tables_blob);
             acpi_build_hest(ags, tables_blob, tables->hardware_errors,
-                            tables->linker, vms->oem_id, vms->oem_table_id);
+                            tables->linker, hest_ghes_notify,
+                            ARRAY_SIZE(hest_ghes_notify),
+                            vms->oem_id, vms->oem_table_id);
         }
     }
 
include/hw/acpi/ghes.h +12 -5
index 2f06e433ce04..51c6b6b33327 100644
@@ -57,13 +57,18 @@ enum AcpiGhesNotifyType {
     ACPI_GHES_NOTIFY_RESERVED = 12
 };
 
-enum {
-    ACPI_HEST_SRC_ID_SEA = 0,
-    /* future ids go here */
-
-    ACPI_GHES_ERROR_SOURCE_COUNT
+/*
+ * ID numbers used to fill HEST source ID field
+ */
+enum AcpiGhesSourceID {
+    ACPI_HEST_SRC_ID_SYNC,
 };
 
+typedef struct AcpiNotificationSourceId {
+    enum AcpiGhesSourceID source_id;
+    enum AcpiGhesNotifyType notify;
+} AcpiNotificationSourceId;
+
 /*
  * AcpiGhesState stores an offset that will be used to fill HEST entries.
  *
@@ -86,6 +91,8 @@ typedef struct AcpiGhesState {
 void acpi_build_hest(AcpiGhesState *ags, GArray *table_data,
                      GArray *hardware_errors,
                      BIOSLinker *linker,
+                     const AcpiNotificationSourceId * const notif_source,
+                     int num_sources,
                      const char *oem_id, const char *oem_table_id);
 void acpi_ghes_add_fw_cfg(AcpiGhesState *vms, FWCfgState *s,
                           GArray *hardware_errors);
Signature · 1 line
2.48.1
#12 lore raw

PATCH v4 6/14 acpi/ghes: create an ancillary acpi_ghes_get_state() function

In reply to Mauro Carvalho Chehab

Instead of having a function to check if ACPI is enabled (acpi_ghes_present), change its logic to be more generic, returing a pointed to AcpiGhesState.

Such change allows cleanup the ghes GED state code, avoiding to read it multiple times, and simplifying the code.

---
 hw/acpi/ghes-stub.c    |  7 ++++---
 hw/acpi/ghes.c         | 38 ++++++++++----------------------------
 include/hw/acpi/ghes.h | 14 ++++++++------
 target/arm/kvm.c       |  7 +++++--
 4 files changed, 27 insertions(+), 39 deletions(-)
hw/acpi/ghes-stub.c +4 -3
index 7cec1812dad9..40f660c246fe 100644
@@ -11,12 +11,13 @@
 #include "qemu/osdep.h"
 #include "hw/acpi/ghes.h"
 
-int acpi_ghes_memory_errors(uint16_t source_id, uint64_t physical_address)
+int acpi_ghes_memory_errors(AcpiGhesState *ags, uint16_t source_id,
+                            uint64_t physical_address)
 {
     return -1;
 }
 
-bool acpi_ghes_present(void)
+AcpiGhesState *acpi_ghes_get_state(void)
 {
-    return false;
+    return NULL;
 }
hw/acpi/ghes.c +10 -28
index f2d1cc7369f4..401789259f60 100644
@@ -425,10 +425,6 @@ static void get_hw_error_offsets(uint64_t ghes_addr,
                                  uint64_t *cper_addr,
                                  uint64_t *read_ack_register_addr)
 {
-    if (!ghes_addr) {
-        return;
-    }
-
     /*
      * non-HEST version supports only one source, so no need to change
      * the start offset based on the source ID. Also, we can't validate
@@ -517,27 +513,16 @@ static void get_ghes_source_offsets(uint16_t source_id,
 NotifierList acpi_generic_error_notifiers =
     NOTIFIER_LIST_INITIALIZER(error_device_notifiers);
 
-void ghes_record_cper_errors(const void *cper, size_t len,
+void ghes_record_cper_errors(AcpiGhesState *ags, const void *cper, size_t len,
                              uint16_t source_id, Error **errp)
 {
     uint64_t cper_addr = 0, read_ack_register_addr = 0, read_ack_register;
-    AcpiGedState *acpi_ged_state;
-    AcpiGhesState *ags;
 
     if (len > ACPI_GHES_MAX_RAW_DATA_LENGTH) {
         error_setg(errp, "GHES CPER record is too big: %zd", len);
         return;
     }
 
-    acpi_ged_state = ACPI_GED(object_resolve_path_type("", TYPE_ACPI_GED,
-                                                       NULL));
-    if (!acpi_ged_state) {
-        error_setg(errp, "Can't find ACPI_GED object");
-        return;
-    }
-    ags = &acpi_ged_state->ghes_state;
-
-
     if (!ags->use_hest_addr) {
         get_hw_error_offsets(le64_to_cpu(ags->hw_error_le),
                              &cper_addr, &read_ack_register_addr);
@@ -546,11 +531,6 @@ void ghes_record_cper_errors(const void *cper, size_t len,
                                 &cper_addr, &read_ack_register_addr, errp);
     }
 
-    if (!cper_addr) {
-        error_setg(errp, "can not find Generic Error Status Block");
-        return;
-    }
-
     cpu_physical_memory_read(read_ack_register_addr,
                              &read_ack_register, sizeof(read_ack_register));
 
@@ -576,7 +556,8 @@ void ghes_record_cper_errors(const void *cper, size_t len,
     notifier_list_notify(&acpi_generic_error_notifiers, NULL);
 }
 
-int acpi_ghes_memory_errors(uint16_t source_id, uint64_t physical_address)
+int acpi_ghes_memory_errors(AcpiGhesState *ags, uint16_t source_id,
+                            uint64_t physical_address)
 {
     /* Memory Error Section Type */
     const uint8_t guid[] =
@@ -602,7 +583,7 @@ int acpi_ghes_memory_errors(uint16_t source_id, uint64_t physical_address)
     acpi_ghes_build_append_mem_cper(block, physical_address);
 
     /* Report the error */
-    ghes_record_cper_errors(block->data, block->len, source_id, &errp);
+    ghes_record_cper_errors(ags, block->data, block->len, source_id, &errp);
 
     g_array_free(block, true);
 
@@ -614,7 +595,7 @@ int acpi_ghes_memory_errors(uint16_t source_id, uint64_t physical_address)
     return 0;
 }
 
-bool acpi_ghes_present(void)
+AcpiGhesState *acpi_ghes_get_state(void)
 {
     AcpiGedState *acpi_ged_state;
     AcpiGhesState *ags;
@@ -623,11 +604,12 @@ bool acpi_ghes_present(void)
                                                        NULL));
 
     if (!acpi_ged_state) {
-        return false;
+        return NULL;
     }
     ags = &acpi_ged_state->ghes_state;
-    if (!ags->hw_error_le && !ags->hest_addr_le)
-        return false;
 
-    return true;
+    if (!ags->hw_error_le && !ags->hest_addr_le) {
+        return NULL;
+    }
+    return ags;
 }
include/hw/acpi/ghes.h +8 -6
index 219aa7ab4fe0..276f9dc076d9 100644
@@ -99,15 +99,17 @@ void acpi_build_hest(AcpiGhesState *ags, GArray *table_data,
                      const char *oem_id, const char *oem_table_id);
 void acpi_ghes_add_fw_cfg(AcpiGhesState *vms, FWCfgState *s,
                           GArray *hardware_errors);
-int acpi_ghes_memory_errors(uint16_t source_id, uint64_t error_physical_addr);
-void ghes_record_cper_errors(const void *cper, size_t len,
+int acpi_ghes_memory_errors(AcpiGhesState *ags, uint16_t source_id,
+                            uint64_t error_physical_addr);
+void ghes_record_cper_errors(AcpiGhesState *ags, const void *cper, size_t len,
                              uint16_t source_id, Error **errp);
 
 /**
- * acpi_ghes_present: Report whether ACPI GHES table is present
+ * acpi_ghes_get_state: Get a pointer for ACPI ghes state
  *
- * Returns: true if the system has an ACPI GHES table and it is
- * safe to call acpi_ghes_memory_errors() to record a memory error.
+ * Returns: a pointer to ghes state if the system has an ACPI GHES table,
+ * it is enabled and it is safe to call acpi_ghes_memory_errors() to record
+ * a memory error. Returns false, otherwise.
  */
-bool acpi_ghes_present(void);
+AcpiGhesState *acpi_ghes_get_state(void);
 #endif
target/arm/kvm.c +5 -2
index da30bdbb2349..80ca7779797b 100644
@@ -2366,10 +2366,12 @@ void kvm_arch_on_sigbus_vcpu(CPUState *c, int code, void *addr)
 {
     ram_addr_t ram_addr;
     hwaddr paddr;
+    AcpiGhesState *ags;
 
     assert(code == BUS_MCEERR_AR || code == BUS_MCEERR_AO);
 
-    if (acpi_ghes_present() && addr) {
+    ags = acpi_ghes_get_state();
+    if (ags && addr) {
         ram_addr = qemu_ram_addr_from_host(addr);
         if (ram_addr != RAM_ADDR_INVALID &&
             kvm_physical_memory_addr_from_host(c->kvm_state, addr, &paddr)) {
@@ -2387,7 +2389,8 @@ void kvm_arch_on_sigbus_vcpu(CPUState *c, int code, void *addr)
              */
             if (code == BUS_MCEERR_AR) {
                 kvm_cpu_synchronize_state(c);
-                if (!acpi_ghes_memory_errors(ACPI_HEST_SRC_ID_SEA, paddr)) {
+                if (!acpi_ghes_memory_errors(ags, ACPI_HEST_SRC_ID_SEA,
+                                             paddr)) {
                     kvm_inject_arm_sea(c);
                 } else {
                     error_report("failed to record the error");
Signature · 1 line
2.48.1
#14 lore raw

PATCH v4 7/14 acpi/generic_event_device: Update GHES migration to cover hest addr

In reply to Mauro Carvalho Chehab

The GHES migration logic should now support HEST table location too.

---
 hw/acpi/generic_event_device.c | 29 +++++++++++++++++++++++++++++
 1 file changed, 29 insertions(+)
hw/acpi/generic_event_device.c +29 -0
index c85d97ca3776..5346cae573b7 100644
@@ -386,6 +386,34 @@ static const VMStateDescription vmstate_ghes_state = {
     }
 };
 
+static const VMStateDescription vmstate_hest = {
+    .name = "acpi-hest",
+    .version_id = 1,
+    .minimum_version_id = 1,
+    .fields = (const VMStateField[]) {
+        VMSTATE_UINT64(hest_addr_le, AcpiGhesState),
+        VMSTATE_END_OF_LIST()
+    },
+};
+
+static bool hest_needed(void *opaque)
+{
+    AcpiGedState *s = opaque;
+    return s->ghes_state.hest_addr_le;
+}
+
+static const VMStateDescription vmstate_hest_state = {
+    .name = "acpi-ged/hest",
+    .version_id = 1,
+    .minimum_version_id = 1,
+    .needed = hest_needed,
+    .fields = (const VMStateField[]) {
+        VMSTATE_STRUCT(ghes_state, AcpiGedState, 1,
+                       vmstate_hest, AcpiGhesState),
+        VMSTATE_END_OF_LIST()
+    }
+};
+
 static const VMStateDescription vmstate_acpi_ged = {
     .name = "acpi-ged",
     .version_id = 1,
@@ -398,6 +426,7 @@ static const VMStateDescription vmstate_acpi_ged = {
         &vmstate_memhp_state,
         &vmstate_cpuhp_state,
         &vmstate_ghes_state,
+        &vmstate_hest_state,
         NULL
     }
 };
Signature · 1 line
2.48.1
#15 lore raw

PATCH v4 8/14 acpi/generic_event_device: add logic to detect if HEST addr is available

In reply to Mauro Carvalho Chehab

Create a new property (x-has-hest-addr) and use it to detect if the GHES table offsets can be calculated from the HEST address (qemu 10.0 and upper) or via the legacy way via an offset obtained from the hardware_errors firmware file.

---
 hw/acpi/generic_event_device.c |  1 +
 hw/arm/virt-acpi-build.c       | 18 ++++++++++++++++--
 hw/core/machine.c              |  2 ++
 3 files changed, 19 insertions(+), 2 deletions(-)
hw/acpi/generic_event_device.c +1 -0
index 5346cae573b7..14d8513a5440 100644
@@ -318,6 +318,7 @@ static void acpi_ged_send_event(AcpiDeviceIf *adev, AcpiEventStatusBits ev)
 
 static const Property acpi_ged_properties[] = {
     DEFINE_PROP_UINT32("ged-event", AcpiGedState, ged_event_bitmap, 0),
+    DEFINE_PROP_BOOL("x-has-hest-addr", AcpiGedState, ghes_state.use_hest_addr, false),
 };
 
 static const VMStateDescription vmstate_memhp_state = {
hw/arm/virt-acpi-build.c +16 -2
index 4439252e1a75..9de51105a513 100644
@@ -897,6 +897,10 @@ static const AcpiNotificationSourceId hest_ghes_notify[] = {
     { ACPI_HEST_SRC_ID_SYNC, ACPI_GHES_NOTIFY_SEA },
 };
 
+static const AcpiNotificationSourceId hest_ghes_notify_9_2[] = {
+    { ACPI_HEST_SRC_ID_SYNC, ACPI_GHES_NOTIFY_SEA },
+};
+
 static
 void virt_acpi_build(VirtMachineState *vms, AcpiBuildTables *tables)
 {
@@ -950,7 +954,9 @@ void virt_acpi_build(VirtMachineState *vms, AcpiBuildTables *tables)
     build_dbg2(tables_blob, tables->linker, vms);
 
     if (vms->ras) {
+        static const AcpiNotificationSourceId *notify;
         AcpiGedState *acpi_ged_state;
+        unsigned int notify_sz;
         AcpiGhesState *ags;
 
         acpi_ged_state = ACPI_GED(object_resolve_path_type("", TYPE_ACPI_GED,
@@ -959,9 +965,17 @@ void virt_acpi_build(VirtMachineState *vms, AcpiBuildTables *tables)
             ags = &acpi_ged_state->ghes_state;
 
             acpi_add_table(table_offsets, tables_blob);
+
+            if (!ags->use_hest_addr) {
+                notify = hest_ghes_notify_9_2;
+                notify_sz = ARRAY_SIZE(hest_ghes_notify_9_2);
+            } else {
+                notify = hest_ghes_notify;
+                notify_sz = ARRAY_SIZE(hest_ghes_notify);
+            }
+
             acpi_build_hest(ags, tables_blob, tables->hardware_errors,
-                            tables->linker, hest_ghes_notify,
-                            ARRAY_SIZE(hest_ghes_notify),
+                            tables->linker, notify, notify_sz,
                             vms->oem_id, vms->oem_table_id);
         }
     }
hw/core/machine.c +2 -0
index 02cff735b3fb..7a11e0f87b11 100644
@@ -34,6 +34,7 @@
 #include "hw/virtio/virtio-pci.h"
 #include "hw/virtio/virtio-net.h"
 #include "hw/virtio/virtio-iommu.h"
+#include "hw/acpi/generic_event_device.h"
 #include "audio/audio.h"
 
 GlobalProperty hw_compat_9_2[] = {
@@ -43,6 +44,7 @@ GlobalProperty hw_compat_9_2[] = {
     { "virtio-balloon-pci-non-transitional", "vectors", "0" },
     { "virtio-mem-pci", "vectors", "0" },
     { "migration", "multifd-clean-tls-termination", "false" },
+    { TYPE_ACPI_GED, "x-has-hest-addr", "false" },
 };
 const size_t hw_compat_9_2_len = G_N_ELEMENTS(hw_compat_9_2);
 
Signature · 1 line
2.48.1
#23 lore raw

PATCH v4 11/14 arm/virt: Wire up a GED error device for ACPI / GHES

In reply to Mauro Carvalho Chehab

Adds support to ARM virtualization to allow handling generic error ACPI Event via GED & error source device.

It is aligned with Linux Kernel patch:
https://lore.kernel.org/lkml/[email protected]/

---

Changes from v8:

- Added a call to the function that produces GHES generic records, as this is now added earlier in this series.

---
 hw/acpi/generic_event_device.c |  2 +-
 hw/arm/virt-acpi-build.c       |  1 +
 hw/arm/virt.c                  | 12 +++++++++++-
 include/hw/arm/virt.h          |  1 +
 4 files changed, 14 insertions(+), 2 deletions(-)
hw/acpi/generic_event_device.c +1 -1
index 180eebbce1cd..f5e899155d34 100644
@@ -331,7 +331,7 @@ static void acpi_ged_send_event(AcpiDeviceIf *adev, AcpiEventStatusBits ev)
 
 static const Property acpi_ged_properties[] = {
     DEFINE_PROP_UINT32("ged-event", AcpiGedState, ged_event_bitmap, 0),
-    DEFINE_PROP_BOOL("x-has-hest-addr", AcpiGedState, ghes_state.use_hest_addr, false),
+    DEFINE_PROP_BOOL("x-has-hest-addr", AcpiGedState, ghes_state.use_hest_addr, true),
 };
 
 static const VMStateDescription vmstate_memhp_state = {
hw/arm/virt-acpi-build.c +1 -0
index 9de51105a513..4f174795ed60 100644
@@ -861,6 +861,7 @@ build_dsdt(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)
     }
 
     acpi_dsdt_add_power_button(scope);
+    aml_append(scope, aml_error_device());
 #ifdef CONFIG_TPM
     acpi_dsdt_add_tpm(scope, vms);
 #endif
hw/arm/virt.c +11 -1
index 4a5a9666e916..3faf32f900b5 100644
@@ -678,7 +678,7 @@ static inline DeviceState *create_acpi_ged(VirtMachineState *vms)
     DeviceState *dev;
     MachineState *ms = MACHINE(vms);
     int irq = vms->irqmap[VIRT_ACPI_GED];
-    uint32_t event = ACPI_GED_PWR_DOWN_EVT;
+    uint32_t event = ACPI_GED_PWR_DOWN_EVT | ACPI_GED_ERROR_EVT;
 
     if (ms->ram_slots) {
         event |= ACPI_GED_MEM_HOTPLUG_EVT;
@@ -1010,6 +1010,13 @@ static void virt_powerdown_req(Notifier *n, void *opaque)
     }
 }
 
+static void virt_generic_error_req(Notifier *n, void *opaque)
+{
+    VirtMachineState *s = container_of(n, VirtMachineState, generic_error_notifier);
+
+    acpi_send_event(s->acpi_dev, ACPI_GENERIC_ERROR);
+}
+
 static void create_gpio_keys(char *fdt, DeviceState *pl061_dev,
                              uint32_t phandle)
 {
@@ -2404,6 +2411,9 @@ static void machvirt_init(MachineState *machine)
 
     if (has_ged && aarch64 && firmware_loaded && virt_is_acpi_enabled(vms)) {
         vms->acpi_dev = create_acpi_ged(vms);
+        vms->generic_error_notifier.notify = virt_generic_error_req;
+        notifier_list_add(&acpi_generic_error_notifiers,
+                          &vms->generic_error_notifier);
     } else {
         create_gpio_devices(vms, VIRT_GPIO, sysmem);
     }
include/hw/arm/virt.h +1 -0
index c8e94e6aedc9..f3cf28436770 100644
@@ -176,6 +176,7 @@ struct VirtMachineState {
     DeviceState *gic;
     DeviceState *acpi_dev;
     Notifier powerdown_notifier;
+    Notifier generic_error_notifier;
     PCIBus *bus;
     char *oem_id;
     char *oem_table_id;
Signature · 1 line
2.48.1
#25 lore raw

PATCH v4 12/14 tests/acpi: virt: add a HEST table to aarch64 virt and update DSDT

In reply to Mauro Carvalho Chehab
DSDT.dsl 2025-01-28 09:39:01.684836954 +0100 renamed from DSDT.dsl 2025-01-28 09:38:15.155347858 +0100 +13 -2
@@ -9,9 +9,9 @@
  *
  * Original Table Header:
  *     Signature        "DSDT"
- *     Length           0x00001516 (5398)
+ *     Length           0x00001542 (5442)
  *     Revision         0x02
- *     Checksum         0x0F
+ *     Checksum         0xE9
  *     OEM ID           "BOCHS "
  *     OEM Table ID     "BXPC    "
  *     OEM Revision     0x00000001 (1)
@@ -1931,6 +1931,11 @@
                 {
                     Notify (PWRB, 0x80) // Status Change
                 }
+
+                If (((Local0 & 0x10) == 0x10))
+                {
+                    Notify (GEDD, 0x80) // Status Change
+                }
             }
         }
 
@@ -1939,6 +1944,12 @@
             Name (_HID, "PNP0C0C" /* Power Button Device */)  // _HID: Hardware ID
             Name (_UID, Zero)  // _UID: Unique ID
         }
+
+        Device (GEDD)
+        {
+            Name (_HID, "PNP0C33" /* Error Device */)  // _HID: Hardware ID
+            Name (_UID, Zero)  // _UID: Unique ID
+        }
     }
 }
 
---
 tests/data/acpi/aarch64/virt/DSDT             | Bin 5196 -> 5240 bytes
 .../data/acpi/aarch64/virt/DSDT.acpihmatvirt  | Bin 5282 -> 5326 bytes
 tests/data/acpi/aarch64/virt/DSDT.memhp       | Bin 6557 -> 6601 bytes
 tests/data/acpi/aarch64/virt/DSDT.pxb         | Bin 7679 -> 7723 bytes
 tests/data/acpi/aarch64/virt/DSDT.topology    | Bin 5398 -> 5442 bytes
 tests/qtest/bios-tables-test-allowed-diff.h   |   1 -
 6 files changed, 1 deletion(-)
tests/data/acpi/aarch64/virt/DSDT binary +0 -0
index 36d3e5d5a5e47359b6dcb3706f98b4f225677591..a182bd9d7182dccdf63c650d048c58f18505d001 100644
GIT binary patch
tests/data/acpi/aarch64/virt/DSDT.acpihmatvirt binary +0 -0
index e6154d0355f84fdcc51387b4db8f9ee63acae4e9..af1f2b0eb0b77a80c5bd74f201d24f71e486627f 100644
GIT binary patch
tests/data/acpi/aarch64/virt/DSDT.memhp binary +0 -0
index 33f011d6b635035a04c0b39ce9b4e219f7ae74b7..10436ec87c4859fb84b3ecb7bba5788f38112e59 100644
GIT binary patch
tests/data/acpi/aarch64/virt/DSDT.pxb binary +0 -0
index c0fdc6e9c1396cc2259dc4bc665ba023adcf4c9b..0524b3cbe00bfe552de824dd1090bd00a208c527 100644
GIT binary patch
tests/data/acpi/aarch64/virt/DSDT.topology binary +0 -0
index 029d03eecc4efddc001e5377e85ac8e831294362..8c0423fe62d6950f9098983d86bfee256d7d003a 100644
GIT binary patch
tests/qtest/bios-tables-test-allowed-diff.h +0 -1
index 1a4c2277bd5a..dfb8523c8bf4 100644
@@ -1,2 +1 @@
 /* List of comma-separated changed AML files to ignore */
-"tests/data/acpi/aarch64/virt/DSDT",
Signature · 1 line
2.48.1
#26 lore raw

PATCH v4 13/14 qapi/acpi-hest: add an interface to do generic CPER error injection

In reply to Mauro Carvalho Chehab

Creates a QMP command to be used for generic ACPI APEI hardware error injection (HEST) via GHESv2, and add support for it for ARM guests.

Error injection uses ACPI_HEST_SRC_ID_QMP source ID to be platform independent. This is mapped at arch virt bindings, depending on the types supported by QEMU and by the BIOS. So, on ARM, this is supported via ACPI_GHES_NOTIFY_GPIO notification type.

This patch is co-authored:
- original ghes logic to inject a simple ARM record by Shiju Jose;
- generic logic to handle block addresses by Jonathan Cameron;
- generic GHESv2 error inject by Mauro Carvalho Chehab;

---

Changes since v9:
- ARM source IDs renamed to reflect SYNC/ASYNC;
- command name changed to better reflect what it does;
- some improvements at JSON documentation;
- add a check for QMP source at the notification logic.

---
 MAINTAINERS              |  7 +++++++
 hw/acpi/Kconfig          |  5 +++++
 hw/acpi/ghes.c           |  2 +-
 hw/acpi/ghes_cper.c      | 38 ++++++++++++++++++++++++++++++++++++++
 hw/acpi/ghes_cper_stub.c | 19 +++++++++++++++++++
 hw/acpi/meson.build      |  2 ++
 hw/arm/virt-acpi-build.c |  1 +
 hw/arm/virt.c            |  7 +++++++
 include/hw/acpi/ghes.h   |  1 +
 include/hw/arm/virt.h    |  1 +
 qapi/acpi-hest.json      | 35 +++++++++++++++++++++++++++++++++++
 qapi/meson.build         |  1 +
 qapi/qapi-schema.json    |  1 +
 13 files changed, 119 insertions(+), 1 deletion(-)
 create mode 100644 hw/acpi/ghes_cper.c
 create mode 100644 hw/acpi/ghes_cper_stub.c
 create mode 100644 qapi/acpi-hest.json
MAINTAINERS +7 -0
index 3848d37a38d2..aed0f4cc62cd 100644
@@ -2080,6 +2080,13 @@ F: hw/acpi/ghes.c
 F: include/hw/acpi/ghes.h
 F: docs/specs/acpi_hest_ghes.rst
 
+ACPI/HEST/GHES/ARM processor CPER
+R: Mauro Carvalho Chehab <[email protected]>
+S: Maintained
+F: hw/arm/ghes_cper.c
+F: hw/acpi/ghes_cper_stub.c
+F: qapi/acpi-hest.json
+
 ppc4xx
 L: [email protected]
 S: Orphan
hw/acpi/Kconfig +5 -0
index 1d4e9f0845c0..daabbe6cd11e 100644
@@ -51,6 +51,11 @@ config ACPI_APEI
     bool
     depends on ACPI
 
+config GHES_CPER
+    bool
+    depends on ACPI_APEI
+    default y
+
 config ACPI_PCI
     bool
     depends on ACPI && PCI
hw/acpi/ghes.c +1 -1
index 401789259f60..3bea55e2e8e9 100644
@@ -553,7 +553,7 @@ void ghes_record_cper_errors(AcpiGhesState *ags, const void *cper, size_t len,
     /* Write the generic error data entry into guest memory */
     cpu_physical_memory_write(cper_addr, cper, len);
 
-    notifier_list_notify(&acpi_generic_error_notifiers, NULL);
+    notifier_list_notify(&acpi_generic_error_notifiers, &source_id);
 }
 
 int acpi_ghes_memory_errors(AcpiGhesState *ags, uint16_t source_id,
hw/acpi/ghes_cper.c new file +38 -0
new file mode 100644
index 000000000000..0a2d95dd8b27
@@ -0,0 +1,38 @@
+/*
+ * CPER payload parser for error injection
+ *
+ * Copyright(C) 2024-2025 Huawei LTD.
+ *
+ * This code is licensed under the GPL version 2 or later. See the
+ * COPYING file in the top-level directory.
+ *
+ */
+
+#include "qemu/osdep.h"
+
+#include "qemu/base64.h"
+#include "qemu/error-report.h"
+#include "qemu/uuid.h"
+#include "qapi/qapi-commands-acpi-hest.h"
+#include "hw/acpi/ghes.h"
+
+void qmp_inject_ghes_v2_error(const char *qmp_cper, Error **errp)
+{
+    AcpiGhesState *ags;
+
+    ags = acpi_ghes_get_state();
+    if (!ags) {
+        return;
+    }
+
+    uint8_t *cper;
+    size_t  len;
+
+    cper = qbase64_decode(qmp_cper, -1, &len, errp);
+    if (!cper) {
+        error_setg(errp, "missing GHES CPER payload");
+        return;
+    }
+
+    ghes_record_cper_errors(ags, cper, len, ACPI_HEST_SRC_ID_QMP, errp);
+}
hw/acpi/ghes_cper_stub.c new file +19 -0
new file mode 100644
index 000000000000..5ebc61970a78
@@ -0,0 +1,19 @@
+/*
+ * Stub interface for CPER payload parser for error injection
+ *
+ * Copyright(C) 2024-2025 Huawei LTD.
+ *
+ * This code is licensed under the GPL version 2 or later. See the
+ * COPYING file in the top-level directory.
+ *
+ */
+
+#include "qemu/osdep.h"
+#include "qapi/error.h"
+#include "qapi/qapi-commands-acpi-hest.h"
+#include "hw/acpi/ghes.h"
+
+void qmp_inject_ghes_v2_error(const char *cper, Error **errp)
+{
+    error_setg(errp, "GHES QMP error inject is not compiled in");
+}
hw/acpi/meson.build +2 -0
index 73f02b96912b..56b5d1ec9691 100644
@@ -34,4 +34,6 @@ endif
 system_ss.add(when: 'CONFIG_ACPI', if_false: files('acpi-stub.c', 'aml-build-stub.c', 'ghes-stub.c', 'acpi_interface.c'))
 system_ss.add(when: 'CONFIG_ACPI_PCI_BRIDGE', if_false: files('pci-bridge-stub.c'))
 system_ss.add_all(when: 'CONFIG_ACPI', if_true: acpi_ss)
+system_ss.add(when: 'CONFIG_GHES_CPER', if_true: files('ghes_cper.c'))
+system_ss.add(when: 'CONFIG_GHES_CPER', if_false: files('ghes_cper_stub.c'))
 system_ss.add(files('acpi-qmp-cmds.c'))
hw/arm/virt-acpi-build.c +1 -0
index 4f174795ed60..7b6e90d69298 100644
@@ -896,6 +896,7 @@ static void acpi_align_size(GArray *blob, unsigned align)
 
 static const AcpiNotificationSourceId hest_ghes_notify[] = {
     { ACPI_HEST_SRC_ID_SYNC, ACPI_GHES_NOTIFY_SEA },
+    { ACPI_HEST_SRC_ID_QMP, ACPI_GHES_NOTIFY_GPIO },
 };
 
 static const AcpiNotificationSourceId hest_ghes_notify_9_2[] = {
hw/arm/virt.c +7 -0
index 3faf32f900b5..116428ab582e 100644
@@ -1012,6 +1012,13 @@ static void virt_powerdown_req(Notifier *n, void *opaque)
 
 static void virt_generic_error_req(Notifier *n, void *opaque)
 {
+    uint16_t *source_id = opaque;
+
+    /* Currently, only QMP source ID is async */
+    if (*source_id != ACPI_HEST_SRC_ID_QMP) {
+        return;
+    }
+
     VirtMachineState *s = container_of(n, VirtMachineState, generic_error_notifier);
 
     acpi_send_event(s->acpi_dev, ACPI_GENERIC_ERROR);
include/hw/acpi/ghes.h +1 -0
index 276f9dc076d9..47f30fec724a 100644
@@ -65,6 +65,7 @@ enum AcpiGhesNotifyType {
  */
 enum AcpiGhesSourceID {
     ACPI_HEST_SRC_ID_SYNC,
+    ACPI_HEST_SRC_ID_QMP,       /* Use it only for QMP injected errors */
 };
 
 typedef struct AcpiNotificationSourceId {
include/hw/arm/virt.h +1 -0
index f3cf28436770..56f270f61cf5 100644
@@ -33,6 +33,7 @@
 #include "exec/hwaddr.h"
 #include "qemu/notify.h"
 #include "hw/boards.h"
+#include "hw/acpi/ghes.h"
 #include "hw/arm/boot.h"
 #include "hw/arm/bsa.h"
 #include "hw/block/flash.h"
qapi/acpi-hest.json new file +35 -0
new file mode 100644
index 000000000000..fff5018c7ec1
@@ -0,0 +1,35 @@
+# -*- Mode: Python -*-
+# vim: filetype=python
+
+##
+# == GHESv2 CPER Error Injection
+#
+# Defined since ACPI Specification 6.1,
+# section 18.3.2.8 Generic Hardware Error Source version 2. See:
+#
+# https://uefi.org/sites/default/files/resources/ACPI_6_1.pdf
+##
+
+
+##
+# @inject-ghes-v2-error:
+#
+# Inject an error with additional ACPI 6.1 GHESv2 error information
+#
+# @cper: contains a base64 encoded string with raw data for a single
+#     CPER record with Generic Error Status Block, Generic Error Data
+#     Entry and generic error data payload, as described at
+#     https://uefi.org/specs/UEFI/2.10/Apx_N_Common_Platform_Error_Record.html#format
+#
+# Features:
+#
+# @unstable: This command is experimental.
+#
+# Since: 10.0
+##
+{ 'command': 'inject-ghes-v2-error',
+  'data': {
+    'cper': 'str'
+  },
+  'features': [ 'unstable' ]
+}
qapi/meson.build +1 -0
index e7bc54e5d047..35cea6147262 100644
@@ -59,6 +59,7 @@ qapi_all_modules = [
 if have_system
   qapi_all_modules += [
     'acpi',
+    'acpi-hest',
     'audio',
     'cryptodev',
     'qdev',
qapi/qapi-schema.json +1 -0
index b1581988e4eb..baf19ab73afe 100644
@@ -75,6 +75,7 @@
 { 'include': 'misc-target.json' }
 { 'include': 'audio.json' }
 { 'include': 'acpi.json' }
+{ 'include': 'acpi-hest.json' }
 { 'include': 'pci.json' }
 { 'include': 'stats.json' }
 { 'include': 'virtio.json' }
Signature · 1 line
2.48.1
#27 lore raw

PATCH v4 14/14 scripts/ghes_inject: add a script to generate GHES error inject

In reply to Mauro Carvalho Chehab

Using the QMP GHESv2 API requires preparing a raw data array containing a CPER record.

Add a helper script with subcommands to prepare such data.

Currently, only ARM Processor error CPER record is supported, by using:

	$ ghes_inject.py arm

which produces those warnings on Linux:

[  705.032426] [Firmware Warn]: GHES: Unhandled processor error type 0x02: cache error
[  774.866308] {4}[Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 1
[  774.866583] {4}[Hardware Error]: event severity: recoverable
[  774.866738] {4}[Hardware Error]:  Error 0, type: recoverable
[  774.866889] {4}[Hardware Error]:   section_type: ARM processor error
[  774.867048] {4}[Hardware Error]:   MIDR: 0x00000000000f0510
[  774.867189] {4}[Hardware Error]:   running state: 0x0
[  774.867321] {4}[Hardware Error]:   Power State Coordination Interface state: 0
[  774.867511] {4}[Hardware Error]:   Error info structure 0:
[  774.867679] {4}[Hardware Error]:   num errors: 2
[  774.867801] {4}[Hardware Error]:    error_type: 0x02: cache error
[  774.867962] {4}[Hardware Error]:    error_info: 0x000000000091000f
[  774.868124] {4}[Hardware Error]:     transaction type: Data Access
[  774.868280] {4}[Hardware Error]:     cache error, operation type: Data write
[  774.868465] {4}[Hardware Error]:     cache level: 2
[  774.868592] {4}[Hardware Error]:     processor context not corrupted
[  774.868774] [Firmware Warn]: GHES: Unhandled processor error type 0x02: cache error

Such script allows customizing the error data, allowing to change all fields at the record. Please use:

	$ ghes_inject.py arm -h

For more details about its usage.

---
 MAINTAINERS                    |   3 +
 scripts/arm_processor_error.py | 476 ++++++++++++++++++++++
 scripts/ghes_inject.py         |  51 +++
 scripts/qmp_helper.py          | 702 +++++++++++++++++++++++++++++++++
 4 files changed, 1232 insertions(+)
 create mode 100644 scripts/arm_processor_error.py
 create mode 100755 scripts/ghes_inject.py
 create mode 100755 scripts/qmp_helper.py
MAINTAINERS +3 -0
index aed0f4cc62cd..203baee63712 100644
@@ -2086,6 +2086,9 @@ S: Maintained
 F: hw/arm/ghes_cper.c
 F: hw/acpi/ghes_cper_stub.c
 F: qapi/acpi-hest.json
+F: scripts/ghes_inject.py
+F: scripts/arm_processor_error.py
+F: scripts/qmp_helper.py
 
 ppc4xx
 L: [email protected]
scripts/arm_processor_error.py new file +476 -0

476 lines not on this page · raw message

scripts/ghes_inject.py new file +51 -0

51 lines not on this page · raw message

scripts/qmp_helper.py new file +702 -0

702 lines not on this page · raw message

Signature · 1 line
2.48.1
#28 lore raw
In reply to Mauro Carvalho Chehab
Quoted 9 lines · On Fri, 21 Feb 2025 15:35:09 +0100 Mauro Carvalho Chehab…

Now that the ghes preparation patches were merged, let's add support for error injection.

On this series, the first 6 patches chang to the math used to calculate offsets at HEST table and hardware_error firmware file, together with its migration code. Migration tested with both latest QEMU released kernel and upstream, on both directions.

The next patches add a new QAPI to allow injecting GHESv2 errors, and a script using such QAPI
to inject ARM Processor Error records.

please, run ./scripts/checkpatch on patches before submitting them. as it stands now series cannot be merged due to failing checkpatch

Quoted 79 lines

---
v4:
- added an extra comment for AcpiGhesState structure;
- patches reordered;
- no functional changes, just code shift between the patches in this series.

v3:
- addressed more nits;
- hest_add_le now points to the beginning of HEST table;
- removed HEST from tests/data/acpi;
- added an extra patch to not use fw_cfg with virt-10.0 for hw_error_le

v2:
- address some nits;
- improved ags cleanup patch and removed ags.present field;
- added some missing le*_to_cpu() calls;
- update date at copyright for new files to 2024-2025;
- qmp command changed to: inject-ghes-v2-error ans since updated to 10.0;
- added HEST and DSDT tables after the changes to make check target happy. (two patches: first one whitelisting such tables; second one removing from whitelist and updating/adding such tables to tests/data/acpi)

Mauro Carvalho Chehab (14):
acpi/ghes: prepare to change the way HEST offsets are calculated acpi/ghes: add a firmware file with HEST address acpi/ghes: Use HEST table offsets when preparing GHES records acpi/ghes: don't hard-code the number of sources for HEST table acpi/ghes: add a notifier to notify when error data is ready acpi/ghes: create an ancillary acpi_ghes_get_state() function acpi/generic_event_device: Update GHES migration to cover hest addr acpi/generic_event_device: add logic to detect if HEST addr is
available
acpi/generic_event_device: add an APEI error device tests/acpi: virt: allow acpi table changes for a new table: HEST arm/virt: Wire up a GED error device for ACPI / GHES tests/acpi: virt: add a HEST table to aarch64 virt and update DSDT qapi/acpi-hest: add an interface to do generic CPER error injection scripts/ghes_inject: add a script to generate GHES error inject

 MAINTAINERS                                   |  10 +
 hw/acpi/Kconfig                               |   5 +
 hw/acpi/aml-build.c                           |  10 +
 hw/acpi/generic_event_device.c                |  43 ++
 hw/acpi/ghes-stub.c                           |   7 +-
 hw/acpi/ghes.c                                | 231 ++++--
 hw/acpi/ghes_cper.c                           |  38 +
 hw/acpi/ghes_cper_stub.c                      |  19 +
 hw/acpi/meson.build                           |   2 +
 hw/arm/virt-acpi-build.c                      |  37 +-
 hw/arm/virt.c                                 |  19 +-
 hw/core/machine.c                             |   2 +
 include/hw/acpi/acpi_dev_interface.h          |   1 +
 include/hw/acpi/aml-build.h                   |   2 +
 include/hw/acpi/generic_event_device.h        |   1 +
 include/hw/acpi/ghes.h                        |  54 +-
 include/hw/arm/virt.h                         |   2 +
 qapi/acpi-hest.json                           |  35 +
 qapi/meson.build                              |   1 +
 qapi/qapi-schema.json                         |   1 +
 scripts/arm_processor_error.py                | 476 ++++++++++++
 scripts/ghes_inject.py                        |  51 ++
 scripts/qmp_helper.py                         | 702 ++++++++++++++++++
 target/arm/kvm.c                              |   7 +-
 tests/data/acpi/aarch64/virt/DSDT             | Bin 5196 -> 5240 bytes
 .../data/acpi/aarch64/virt/DSDT.acpihmatvirt  | Bin 5282 -> 5326 bytes
 tests/data/acpi/aarch64/virt/DSDT.memhp       | Bin 6557 -> 6601 bytes
 tests/data/acpi/aarch64/virt/DSDT.pxb         | Bin 7679 -> 7723 bytes
 tests/data/acpi/aarch64/virt/DSDT.topology    | Bin 5398 -> 5442 bytes
 29 files changed, 1677 insertions(+), 79 deletions(-)
 create mode 100644 hw/acpi/ghes_cper.c
 create mode 100644 hw/acpi/ghes_cper_stub.c
 create mode 100644 qapi/acpi-hest.json
 create mode 100644 scripts/arm_processor_error.py
 create mode 100755 scripts/ghes_inject.py
 create mode 100755 scripts/qmp_helper.py
#2 lore raw

Re: [PATCH v4 01/14] acpi/ghes: prepare to change the way HEST offsets are calculated

In reply to Mauro Carvalho Chehab
Quoted 119 lines · On Fri, 21 Feb 2025 15:35:10 +0100 Mauro Carvalho Chehab…

Add a new ags flag to change the way HEST offsets are calculated. Currently, offsets needed to store ACPI HEST offsets and read ack are calculated based on a previous knowledge from the logic which creates the HEST table.

Such logic is not generic, not allowing to easily add more HEST entries nor replicates what OSPM does.

As the next patches will be adding a more generic logic, add a new use_hest_addr, set to false, in preparation for such changes.

---
 hw/acpi/ghes.c           | 46 ++++++++++++++++++++++++----------------
 hw/arm/virt-acpi-build.c | 15 ++++++++++---
 include/hw/acpi/ghes.h   | 14 ++++++++++--
 3 files changed, 52 insertions(+), 23 deletions(-)
hw/acpi/ghes.c +28 -18
index b709c177cdea..e49a03fdb94e 100644
@@ -206,7 +206,8 @@ ghes_gen_err_data_uncorrectable_recoverable(GArray *block,
  * Initialize "etc/hardware_errors" and "etc/hardware_errors_addr" fw_cfg blobs.
  * See docs/specs/acpi_hest_ghes.rst for blobs format.
  */
-static void build_ghes_error_table(GArray *hardware_errors, BIOSLinker *linker)
+static void build_ghes_error_table(AcpiGhesState *ags, GArray *hardware_errors,
+                                   BIOSLinker *linker)
 {
     int i, error_status_block_offset;
 
@@ -251,13 +252,15 @@ static void build_ghes_error_table(GArray *hardware_errors, BIOSLinker *linker)
                                        i * ACPI_GHES_MAX_RAW_DATA_LENGTH);
     }
 
-    /*
-     * tell firmware to write hardware_errors GPA into
-     * hardware_errors_addr fw_cfg, once the former has been initialized.
-     */
-    bios_linker_loader_write_pointer(linker, ACPI_HW_ERROR_ADDR_FW_CFG_FILE, 0,
-                                     sizeof(uint64_t),
-                                     ACPI_HW_ERROR_FW_CFG_FILE, 0);
+    if (!ags->use_hest_addr) {
+        /*
+         * Tell firmware to write hardware_errors GPA into
+         * hardware_errors_addr fw_cfg, once the former has been initialized.
+         */
+        bios_linker_loader_write_pointer(linker, ACPI_HW_ERROR_ADDR_FW_CFG_FILE,
+                                         0, sizeof(uint64_t),
+                                         ACPI_HW_ERROR_FW_CFG_FILE, 0);
+    }
 }
 
 /* Build Generic Hardware Error Source version 2 (GHESv2) */
@@ -331,14 +334,15 @@ static void build_ghes_v2(GArray *table_data,
 }
 
 /* Build Hardware Error Source Table */
-void acpi_build_hest(GArray *table_data, GArray *hardware_errors,
+void acpi_build_hest(AcpiGhesState *ags, GArray *table_data,
+                     GArray *hardware_errors,
                      BIOSLinker *linker,
                      const char *oem_id, const char *oem_table_id)
 {
     AcpiTable table = { .sig = "HEST", .rev = 1,
                         .oem_id = oem_id, .oem_table_id = oem_table_id };
 
-    build_ghes_error_table(hardware_errors, linker);
+    build_ghes_error_table(ags, hardware_errors, linker);
 
     acpi_table_begin(&table, table_data);
 
@@ -357,11 +361,11 @@ void acpi_ghes_add_fw_cfg(AcpiGhesState *ags, FWCfgState *s,
     fw_cfg_add_file(s, ACPI_HW_ERROR_FW_CFG_FILE, hardware_error->data,
                     hardware_error->len);
 
-    /* Create a read-write fw_cfg file for Address */
-    fw_cfg_add_file_callback(s, ACPI_HW_ERROR_ADDR_FW_CFG_FILE, NULL, NULL,
-        NULL, &(ags->hw_error_le), sizeof(ags->hw_error_le), false);
-
-    ags->present = true;
+    if (!ags->use_hest_addr) {
+        /* Create a read-write fw_cfg file for Address */
+        fw_cfg_add_file_callback(s, ACPI_HW_ERROR_ADDR_FW_CFG_FILE, NULL, NULL,
+            NULL, &(ags->hw_error_le), sizeof(ags->hw_error_le), false);
+    }
 }
 
 static void get_hw_error_offsets(uint64_t ghes_addr,
@@ -411,8 +415,11 @@ void ghes_record_cper_errors(const void *cper, size_t len,
     ags = &acpi_ged_state->ghes_state;
 
     assert(ACPI_GHES_ERROR_SOURCE_COUNT == 1);
-    get_hw_error_offsets(le64_to_cpu(ags->hw_error_le),
-                         &cper_addr, &read_ack_register_addr);
+
+    if (!ags->use_hest_addr) {
+        get_hw_error_offsets(le64_to_cpu(ags->hw_error_le),
+                             &cper_addr, &read_ack_register_addr);
+    }
 
     if (!cper_addr) {
         error_setg(errp, "can not find Generic Error Status Block");
@@ -494,5 +501,8 @@ bool acpi_ghes_present(void)
         return false;
     }
     ags = &acpi_ged_state->ghes_state;
-    return ags->present;
+    if (!ags->hw_error_le)
+        return false;
+
+    return true;
 }
hw/arm/virt-acpi-build.c +0 -0
index 3ac8f8e17861..8ab8d11b6536 100644

hw/arm/virt-acpi-build.c void virt_acpi_build(VirtMachineState *vms, AcpiBuildTables *tables) · line 952

Quoted 10 lines
hw/arm/virt-acpi-build.c +4 -3
@@ -946,9 +946,18 @@ void virt_acpi_build(VirtMachineState *vms, AcpiBuildTables *tables)
     build_dbg2(tables_blob, tables->linker, vms);
 
     if (vms->ras) {
-        acpi_add_table(table_offsets, tables_blob);
-        acpi_build_hest(tables_blob, tables->hardware_errors, tables->linker,
-                        vms->oem_id, vms->oem_table_id);
+        AcpiGedState *acpi_ged_state;
+        AcpiGhesState *ags;
+
+        acpi_ged_state = ACPI_GED(object_resolve_path_type("", TYPE_ACPI_GED,

^^^ will explode if object_resolve_path_type() returns NULL

hw/arm/virt-acpi-build.c void virt_acpi_build(VirtMachineState *vms, AcpiBuildTables *tables) · line 953

Quoted 1 line
hw/arm/virt-acpi-build.c +1 -0
+                                                       NULL));

it's also expensive load-wise.
You have access to vms with ged pointer here, use that (search for 'acpi_ged_state = ACPI_GED' example)

hw/arm/virt-acpi-build.c void virt_acpi_build(VirtMachineState *vms, AcpiBuildTables *tables) · line 954

Quoted 1 line
hw/arm/virt-acpi-build.c +1 -0
+        if (acpi_ged_state) {

hence, this check is not really needed, we have to have GED at this point or abort

earlier code that instantiates GED should take care of cleanly exiting if it failed to create GED so we would never get to missing GED here

Quoted 38 lines
hw/arm/virt-acpi-build.c +6 -0
+            ags = &acpi_ged_state->ghes_state;
+
+            acpi_add_table(table_offsets, tables_blob);
+            acpi_build_hest(ags, tables_blob, tables->hardware_errors,
+                            tables->linker, vms->oem_id, vms->oem_table_id);
+        }
     }
 
     if (ms->numa_state->num_nodes > 0) {
include/hw/acpi/ghes.h +12 -2
index 39619a2457cb..a3d62b96584f 100644
@@ -64,12 +64,22 @@ enum {
     ACPI_GHES_ERROR_SOURCE_COUNT
 };
 
+/*
+ * AcpiGhesState stores an offset that will be used to fill HEST entries.
+ *
+ * When use_hest_addr is false, the stored offset is placed at hw_error_le,
+ * meaning an offset from the etc/hardware_errors firmware address. This
+ * is the default on QEMU 9.x.
+ *
+ * An offset value equal to zero means that GHES is not present.
+ */
 typedef struct AcpiGhesState {
     uint64_t hw_error_le;
-    bool present; /* True if GHES is present at all on this board */
+    bool use_hest_addr;         /* Currently, always false */
 } AcpiGhesState;
 
-void acpi_build_hest(GArray *table_data, GArray *hardware_errors,
+void acpi_build_hest(AcpiGhesState *ags, GArray *table_data,
+                     GArray *hardware_errors,
                      BIOSLinker *linker,
                      const char *oem_id, const char *oem_table_id);
 void acpi_ghes_add_fw_cfg(AcpiGhesState *vms, FWCfgState *s,
#29 lore raw
In reply to Igor Mammedov

Em Wed, 26 Feb 2025 15:16:56 +0100
Igor Mammedov <[email protected]> escreveu:

Quoted 10 lines
Quoted 7 lines · On Fri, 21 Feb 2025 15:35:09 +0100 Mauro Carvalho Chehab…

Now that the ghes preparation patches were merged, let's add support for error injection.

On this series, the first 6 patches chang to the math used to calculate offsets at HEST table and hardware_error firmware file, together with its migration code. Migration tested with both latest QEMU released kernel and upstream, on both directions.

Quoted 5 lines
Quoted 2 lines

The next patches add a new QAPI to allow injecting GHESv2 errors, and a script using such QAPI
to inject ARM Processor Error records.

please, run ./scripts/checkpatch on patches before submitting them. as it stands now series cannot be merged due to failing checkpatch

Weird... checkpatch is at pre-commit hook, as recommended at QEMU documentation. It is actually a little harder to manage this way, as it sometimes cause troubles with binary files.

Anyway, I'll run it by hand before sending the next version.

Quoted 81 lines
Quoted 80 lines

---
v4:
- added an extra comment for AcpiGhesState structure;
- patches reordered;
- no functional changes, just code shift between the patches in this series.

v3:
- addressed more nits;
- hest_add_le now points to the beginning of HEST table;
- removed HEST from tests/data/acpi;
- added an extra patch to not use fw_cfg with virt-10.0 for hw_error_le

v2:
- address some nits;
- improved ags cleanup patch and removed ags.present field;
- added some missing le*_to_cpu() calls;
- update date at copyright for new files to 2024-2025;
- qmp command changed to: inject-ghes-v2-error ans since updated to 10.0;
- added HEST and DSDT tables after the changes to make check target happy. (two patches: first one whitelisting such tables; second one removing from whitelist and updating/adding such tables to tests/data/acpi)

Mauro Carvalho Chehab (14):
acpi/ghes: prepare to change the way HEST offsets are calculated acpi/ghes: add a firmware file with HEST address acpi/ghes: Use HEST table offsets when preparing GHES records acpi/ghes: don't hard-code the number of sources for HEST table acpi/ghes: add a notifier to notify when error data is ready acpi/ghes: create an ancillary acpi_ghes_get_state() function acpi/generic_event_device: Update GHES migration to cover hest addr acpi/generic_event_device: add logic to detect if HEST addr is
available
acpi/generic_event_device: add an APEI error device tests/acpi: virt: allow acpi table changes for a new table: HEST arm/virt: Wire up a GED error device for ACPI / GHES tests/acpi: virt: add a HEST table to aarch64 virt and update DSDT qapi/acpi-hest: add an interface to do generic CPER error injection scripts/ghes_inject: add a script to generate GHES error inject

 MAINTAINERS                                   |  10 +
 hw/acpi/Kconfig                               |   5 +
 hw/acpi/aml-build.c                           |  10 +
 hw/acpi/generic_event_device.c                |  43 ++
 hw/acpi/ghes-stub.c                           |   7 +-
 hw/acpi/ghes.c                                | 231 ++++--
 hw/acpi/ghes_cper.c                           |  38 +
 hw/acpi/ghes_cper_stub.c                      |  19 +
 hw/acpi/meson.build                           |   2 +
 hw/arm/virt-acpi-build.c                      |  37 +-
 hw/arm/virt.c                                 |  19 +-
 hw/core/machine.c                             |   2 +
 include/hw/acpi/acpi_dev_interface.h          |   1 +
 include/hw/acpi/aml-build.h                   |   2 +
 include/hw/acpi/generic_event_device.h        |   1 +
 include/hw/acpi/ghes.h                        |  54 +-
 include/hw/arm/virt.h                         |   2 +
 qapi/acpi-hest.json                           |  35 +
 qapi/meson.build                              |   1 +
 qapi/qapi-schema.json                         |   1 +
 scripts/arm_processor_error.py                | 476 ++++++++++++
 scripts/ghes_inject.py                        |  51 ++
 scripts/qmp_helper.py                         | 702 ++++++++++++++++++
 target/arm/kvm.c                              |   7 +-
 tests/data/acpi/aarch64/virt/DSDT             | Bin 5196 -> 5240 bytes
 .../data/acpi/aarch64/virt/DSDT.acpihmatvirt  | Bin 5282 -> 5326 bytes
 tests/data/acpi/aarch64/virt/DSDT.memhp       | Bin 6557 -> 6601 bytes
 tests/data/acpi/aarch64/virt/DSDT.pxb         | Bin 7679 -> 7723 bytes
 tests/data/acpi/aarch64/virt/DSDT.topology    | Bin 5398 -> 5442 bytes
 29 files changed, 1677 insertions(+), 79 deletions(-)
 create mode 100644 hw/acpi/ghes_cper.c
 create mode 100644 hw/acpi/ghes_cper_stub.c
 create mode 100644 qapi/acpi-hest.json
 create mode 100644 scripts/arm_processor_error.py
 create mode 100755 scripts/ghes_inject.py
 create mode 100755 scripts/qmp_helper.py
#6 lore raw

Re: [PATCH v4 02/14] acpi/ghes: add a firmware file with HEST address

In reply to Mauro Carvalho Chehab
Quoted 77 lines · On Fri, 21 Feb 2025 15:35:11 +0100 Mauro Carvalho Chehab…

Store HEST table address at GPA, placing its the start of the table at hest_addr_le variable.

---
 hw/acpi/ghes.c         | 22 ++++++++++++++++++++--
 include/hw/acpi/ghes.h |  7 ++++++-
 2 files changed, 26 insertions(+), 3 deletions(-)
hw/acpi/ghes.c +20 -2
index e49a03fdb94e..ba37be9e7022 100644
@@ -30,6 +30,7 @@
 
 #define ACPI_HW_ERROR_FW_CFG_FILE           "etc/hardware_errors"
 #define ACPI_HW_ERROR_ADDR_FW_CFG_FILE      "etc/hardware_errors_addr"
+#define ACPI_HEST_ADDR_FW_CFG_FILE          "etc/acpi_table_hest_addr"
 
 /* The max size in bytes for one error block */
 #define ACPI_GHES_MAX_RAW_DATA_LENGTH   (1 * KiB)
@@ -341,6 +342,9 @@ void acpi_build_hest(AcpiGhesState *ags, GArray *table_data,
 {
     AcpiTable table = { .sig = "HEST", .rev = 1,
                         .oem_id = oem_id, .oem_table_id = oem_table_id };
+    uint32_t hest_offset;
+
+    hest_offset = table_data->len;
 
     build_ghes_error_table(ags, hardware_errors, linker);
 
@@ -352,6 +356,17 @@ void acpi_build_hest(AcpiGhesState *ags, GArray *table_data,
                   ACPI_GHES_NOTIFY_SEA, ACPI_HEST_SRC_ID_SEA);
 
     acpi_table_end(linker, &table);
+
+    if (ags->use_hest_addr) {
+        /*
+         * Tell firmware to write into GPA the address of HEST via fw_cfg,
+         * once initialized.
+         */
+        bios_linker_loader_write_pointer(linker,
+                                         ACPI_HEST_ADDR_FW_CFG_FILE, 0,
+                                         sizeof(uint64_t),
+                                         ACPI_BUILD_TABLE_FILE, hest_offset);
+    }
 }
 
 void acpi_ghes_add_fw_cfg(AcpiGhesState *ags, FWCfgState *s,
@@ -361,7 +376,10 @@ void acpi_ghes_add_fw_cfg(AcpiGhesState *ags, FWCfgState *s,
     fw_cfg_add_file(s, ACPI_HW_ERROR_FW_CFG_FILE, hardware_error->data,
                     hardware_error->len);
 
-    if (!ags->use_hest_addr) {
+    if (ags->use_hest_addr) {
+        fw_cfg_add_file_callback(s, ACPI_HEST_ADDR_FW_CFG_FILE, NULL, NULL,
+            NULL, &(ags->hest_addr_le), sizeof(ags->hest_addr_le), false);
+    } else {
         /* Create a read-write fw_cfg file for Address */
         fw_cfg_add_file_callback(s, ACPI_HW_ERROR_ADDR_FW_CFG_FILE, NULL, NULL,
             NULL, &(ags->hw_error_le), sizeof(ags->hw_error_le), false);
@@ -501,7 +519,7 @@ bool acpi_ghes_present(void)
         return false;
     }
     ags = &acpi_ged_state->ghes_state;
-    if (!ags->hw_error_le)
+    if (!ags->hw_error_le && !ags->hest_addr_le)
         return false;
 
     return true;
include/hw/acpi/ghes.h +0 -0
index a3d62b96584f..454e97b5341c 100644

include/hw/acpi/ghes.h enum { · line 76

Quoted 7 lines
include/hw/acpi/ghes.h +2 -1
@@ -71,9 +71,14 @@ enum {
  * meaning an offset from the etc/hardware_errors firmware address. This
  * is the default on QEMU 9.x.
  *
- * An offset value equal to zero means that GHES is not present.
 
+ * When use_hest_addr is true, the stored offset is placed at hest_addr_le,
+ * meaning an offset from theHEST table address from etc/acpi/tables firmware.

^^^^^^ missing whitespace

'offset' language is confusing here, is asks for explanation offset from what?

what is kept in hest_addr_le is GPA of HEST table, it would be better to address wording here.
The same applies to similar comment in previous patch

Quoted 9 lines
include/hw/acpi/ghes.h +4 -0
+ * This is the default for QEMU 10.x and above.
+ *
+ * If both offset values are equal to zero, it means that GHES is not present
  */
 typedef struct AcpiGhesState {
+    uint64_t hest_addr_le;
     uint64_t hw_error_le;
     bool use_hest_addr;         /* Currently, always false */

} AcpiGhesState;

#30 lore raw
In reply to Mauro Carvalho Chehab
Quoted 16 lines · On Wed, 26 Feb 2025 15:39:13 +0100 Mauro Carvalho Chehab…

Em Wed, 26 Feb 2025 15:16:56 +0100
Igor Mammedov <[email protected]> escreveu:

Quoted 13 lines
Quoted 9 lines · On Fri, 21 Feb 2025 15:35:09 +0100 Mauro Carvalho Chehab…

Now that the ghes preparation patches were merged, let's add support for error injection.

On this series, the first 6 patches chang to the math used to calculate offsets at HEST table and hardware_error firmware file, together with its migration code. Migration tested with both latest QEMU released kernel and upstream, on both directions.

The next patches add a new QAPI to allow injecting GHESv2 errors, and a script using such QAPI
to inject ARM Processor Error records.

Quoted 8 lines
Quoted 2 lines

please, run ./scripts/checkpatch on patches before submitting them. as it stands now series cannot be merged due to failing checkpatch

Weird... checkpatch is at pre-commit hook, as recommended at QEMU documentation. It is actually a little harder to manage this way, as it sometimes cause troubles with binary files.

Anyway, I'll run it by hand before sending the next version.

I've just applied v4 => format-patch => checkpatch
maybe I did something wrong (don't see how) but it complains overhere

PS: do not respin until I've finish this review.

Quoted 82 lines
Quoted 81 lines
Quoted 80 lines

---
v4:
- added an extra comment for AcpiGhesState structure;
- patches reordered;
- no functional changes, just code shift between the patches in this series.

v3:
- addressed more nits;
- hest_add_le now points to the beginning of HEST table;
- removed HEST from tests/data/acpi;
- added an extra patch to not use fw_cfg with virt-10.0 for hw_error_le

v2:
- address some nits;
- improved ags cleanup patch and removed ags.present field;
- added some missing le*_to_cpu() calls;
- update date at copyright for new files to 2024-2025;
- qmp command changed to: inject-ghes-v2-error ans since updated to 10.0;
- added HEST and DSDT tables after the changes to make check target happy. (two patches: first one whitelisting such tables; second one removing from whitelist and updating/adding such tables to tests/data/acpi)

Mauro Carvalho Chehab (14):
acpi/ghes: prepare to change the way HEST offsets are calculated acpi/ghes: add a firmware file with HEST address acpi/ghes: Use HEST table offsets when preparing GHES records acpi/ghes: don't hard-code the number of sources for HEST table acpi/ghes: add a notifier to notify when error data is ready acpi/ghes: create an ancillary acpi_ghes_get_state() function acpi/generic_event_device: Update GHES migration to cover hest addr acpi/generic_event_device: add logic to detect if HEST addr is
available
acpi/generic_event_device: add an APEI error device tests/acpi: virt: allow acpi table changes for a new table: HEST arm/virt: Wire up a GED error device for ACPI / GHES tests/acpi: virt: add a HEST table to aarch64 virt and update DSDT qapi/acpi-hest: add an interface to do generic CPER error injection scripts/ghes_inject: add a script to generate GHES error inject

 MAINTAINERS                                   |  10 +
 hw/acpi/Kconfig                               |   5 +
 hw/acpi/aml-build.c                           |  10 +
 hw/acpi/generic_event_device.c                |  43 ++
 hw/acpi/ghes-stub.c                           |   7 +-
 hw/acpi/ghes.c                                | 231 ++++--
 hw/acpi/ghes_cper.c                           |  38 +
 hw/acpi/ghes_cper_stub.c                      |  19 +
 hw/acpi/meson.build                           |   2 +
 hw/arm/virt-acpi-build.c                      |  37 +-
 hw/arm/virt.c                                 |  19 +-
 hw/core/machine.c                             |   2 +
 include/hw/acpi/acpi_dev_interface.h          |   1 +
 include/hw/acpi/aml-build.h                   |   2 +
 include/hw/acpi/generic_event_device.h        |   1 +
 include/hw/acpi/ghes.h                        |  54 +-
 include/hw/arm/virt.h                         |   2 +
 qapi/acpi-hest.json                           |  35 +
 qapi/meson.build                              |   1 +
 qapi/qapi-schema.json                         |   1 +
 scripts/arm_processor_error.py                | 476 ++++++++++++
 scripts/ghes_inject.py                        |  51 ++
 scripts/qmp_helper.py                         | 702 ++++++++++++++++++
 target/arm/kvm.c                              |   7 +-
 tests/data/acpi/aarch64/virt/DSDT             | Bin 5196 -> 5240 bytes
 .../data/acpi/aarch64/virt/DSDT.acpihmatvirt  | Bin 5282 -> 5326 bytes
 tests/data/acpi/aarch64/virt/DSDT.memhp       | Bin 6557 -> 6601 bytes
 tests/data/acpi/aarch64/virt/DSDT.pxb         | Bin 7679 -> 7723 bytes
 tests/data/acpi/aarch64/virt/DSDT.topology    | Bin 5398 -> 5442 bytes
 29 files changed, 1677 insertions(+), 79 deletions(-)
 create mode 100644 hw/acpi/ghes_cper.c
 create mode 100644 hw/acpi/ghes_cper_stub.c
 create mode 100644 qapi/acpi-hest.json
 create mode 100644 scripts/arm_processor_error.py
 create mode 100755 scripts/ghes_inject.py
 create mode 100755 scripts/qmp_helper.py
#8 lore raw

Re: [PATCH v4 03/14] acpi/ghes: Use HEST table offsets when preparing GHES records

In reply to Mauro Carvalho Chehab
Quoted 4 lines · On Fri, 21 Feb 2025 15:35:12 +0100 Mauro Carvalho Chehab…

There are two pointers that are needed during error injection:

1. The start address of the CPER block to be stored;
2. The address of the ack.

s/ack/read_ack/

Quoted 6 lines

It is preferable to calculate them from the HEST table. This allows checking the source ID, the size of the table and the type of the HEST error block structures.

Yet, keep the old code, as this is needed for migration purposes

+ from older QEMU versions

Quoted 31 lines
---
 hw/acpi/ghes.c         | 100 +++++++++++++++++++++++++++++++++++++++++
 include/hw/acpi/ghes.h |   2 +-
 2 files changed, 101 insertions(+), 1 deletion(-)
hw/acpi/ghes.c +8 -0
index ba37be9e7022..7efea519f766 100644
@@ -41,6 +41,12 @@
 /* Address offset in Generic Address Structure(GAS) */
 #define GAS_ADDR_OFFSET 4
 
+/*
+ * ACPI spec 1.0b
+ * 5.2.3 System Description Table Header
+ */
+#define ACPI_DESC_HEADER_OFFSET     36
+
 /*
  * The total size of Generic Error Data Entry
  * ACPI 6.1/6.2: 18.3.2.7.1 Generic Error Data,
@@ -61,6 +67,30 @@
  */
 #define ACPI_GHES_GESB_SIZE                 20
 
+/*
+ * See the memory layout map at docs/specs/acpi_hest_ghes.rst.

hw/acpi/ghes.c line 81

Quoted 10 lines
hw/acpi/ghes.c +10 -0
+ */
+
+/*
+ * ACPI 6.1: 18.3.2.8 Generic Hardware Error Source version 2
+ * Table 18-344 Generic Hardware Error Source version 2 (GHESv2) Structure
+ */
+#define HEST_GHES_V2_ENTRY_SIZE  92
+
+/*
+ * ACPI 6.1: 18.3.2.7: Generic Hardware Error Source

wrong chapter, read ack can't be in v1 GHES

Quoted 44 lines
hw/acpi/ghes.c +37 -0
+ * Table 18-344 Generic Hardware Error Source version 2 (GHESv2) Structure
+ * Read Ack Register
+ */
+#define GHES_READ_ACK_ADDR_OFF          64
+
+/*
+ * ACPI 6.1: 18.3.2.7: Generic Hardware Error Source
+ * Table 18-341 Generic Hardware Error Source Structure
+ * Error Status Address
+ */
+#define GHES_ERR_STATUS_ADDR_OFF  20
+
 /*
  * Values for error_severity field
  */
@@ -412,6 +442,73 @@ static void get_hw_error_offsets(uint64_t ghes_addr,
     *read_ack_register_addr = ghes_addr + sizeof(uint64_t);
 }
 
+static void get_ghes_source_offsets(uint16_t source_id,
+                                    uint64_t hest_addr,
+                                    uint64_t *cper_addr,
+                                    uint64_t *read_ack_start_addr,
+                                    Error **errp)
+{
+    uint64_t hest_err_block_addr, hest_read_ack_addr;
+    uint64_t err_source_entry, error_block_addr;
+    uint32_t num_sources, i;
+
+    hest_addr += ACPI_DESC_HEADER_OFFSET;
+
+    cpu_physical_memory_read(hest_addr, &num_sources,
+                             sizeof(num_sources));
+    num_sources = le32_to_cpu(num_sources);
+
+    err_source_entry = hest_addr + sizeof(num_sources);
+
+    /*
+     * Currently, HEST Error source navigates only for GHESv2 tables
+     */
+    for (i = 0; i < num_sources; i++) {
+        uint64_t addr = err_source_entry;
+        uint16_t type, src_id;
+

hw/acpi/ghes.c static void get_hw_error_offsets(uint64_t ghes_addr, · line 479

Quoted 10 lines
hw/acpi/ghes.c +10 -0
+        cpu_physical_memory_read(addr, &type, sizeof(type));
+        type = le16_to_cpu(type);
+
+        /* For now, we only know the size of GHESv2 table */
+        if (type != ACPI_GHES_SOURCE_GENERIC_ERROR_V2) {
+            error_setg(errp, "HEST: type %d not supported.", type);
+            return;
+        }
+
+        /* Compare CPER source address at the GHESv2 structure */
                                  ^^^^^ typo?
Quoted 4 lines
hw/acpi/ghes.c +4 -0
+        addr += sizeof(type);
+        cpu_physical_memory_read(addr, &src_id, sizeof(src_id));
+        if (le16_to_cpu(src_id) == source_id) {
+            break;

hw/acpi/ghes.c static void get_hw_error_offsets(uint64_t ghes_addr, · line 493

Quoted 10 lines
hw/acpi/ghes.c +10 -0
+        }
+
+        err_source_entry += HEST_GHES_V2_ENTRY_SIZE;
+    }
+    if (i == num_sources) {
+        error_setg(errp, "HEST: Source %d not found.", source_id);
+        return;
+    }
+
+    /* Navigate though table address pointers */
                   ^^^^^ typo
Quoted 44 lines
hw/acpi/ghes.c +21 -0
+    hest_err_block_addr = err_source_entry + GHES_ERR_STATUS_ADDR_OFF +
+                          GAS_ADDR_OFFSET;
+
+    cpu_physical_memory_read(hest_err_block_addr, &error_block_addr,
+                             sizeof(error_block_addr));
+    error_block_addr = le64_to_cpu(error_block_addr);
+
+    cpu_physical_memory_read(error_block_addr, cper_addr,
+                             sizeof(*cper_addr));
+    *cper_addr = le64_to_cpu(*cper_addr);
+
+    hest_read_ack_addr = err_source_entry + GHES_READ_ACK_ADDR_OFF +
+                         GAS_ADDR_OFFSET;
+    cpu_physical_memory_read(hest_read_ack_addr, read_ack_start_addr,
+                             sizeof(*read_ack_start_addr));
+    *read_ack_start_addr = le64_to_cpu(*read_ack_start_addr);
+}
+
 void ghes_record_cper_errors(const void *cper, size_t len,
                              uint16_t source_id, Error **errp)
 {
@@ -437,6 +534,9 @@ void ghes_record_cper_errors(const void *cper, size_t len,
     if (!ags->use_hest_addr) {
         get_hw_error_offsets(le64_to_cpu(ags->hw_error_le),
                              &cper_addr, &read_ack_register_addr);
+    } else {
+        get_ghes_source_offsets(source_id, le64_to_cpu(ags->hest_addr_le),
+                                &cper_addr, &read_ack_register_addr, errp);
     }
 
     if (!cper_addr) {
include/hw/acpi/ghes.h +1 -1
index 454e97b5341c..2f06e433ce04 100644
@@ -80,7 +80,7 @@ enum {
 typedef struct AcpiGhesState {
     uint64_t hest_addr_le;
     uint64_t hw_error_le;
-    bool use_hest_addr;         /* Currently, always false */
+    bool use_hest_addr; /* True if HEST address is present */
 } AcpiGhesState;
 
 void acpi_build_hest(AcpiGhesState *ags, GArray *table_data,
#13 lore raw

Re: [PATCH v4 06/14] acpi/ghes: create an ancillary acpi_ghes_get_state() function

In reply to Mauro Carvalho Chehab
Quoted 152 lines · On Fri, 21 Feb 2025 15:35:15 +0100 Mauro Carvalho Chehab…

Instead of having a function to check if ACPI is enabled (acpi_ghes_present), change its logic to be more generic, returing a pointed to AcpiGhesState.

Such change allows cleanup the ghes GED state code, avoiding to read it multiple times, and simplifying the code.

---
 hw/acpi/ghes-stub.c    |  7 ++++---
 hw/acpi/ghes.c         | 38 ++++++++++----------------------------
 include/hw/acpi/ghes.h | 14 ++++++++------
 target/arm/kvm.c       |  7 +++++--
 4 files changed, 27 insertions(+), 39 deletions(-)
hw/acpi/ghes-stub.c +4 -3
index 7cec1812dad9..40f660c246fe 100644
@@ -11,12 +11,13 @@
 #include "qemu/osdep.h"
 #include "hw/acpi/ghes.h"
 
-int acpi_ghes_memory_errors(uint16_t source_id, uint64_t physical_address)
+int acpi_ghes_memory_errors(AcpiGhesState *ags, uint16_t source_id,
+                            uint64_t physical_address)
 {
     return -1;
 }
 
-bool acpi_ghes_present(void)
+AcpiGhesState *acpi_ghes_get_state(void)
 {
-    return false;
+    return NULL;
 }
hw/acpi/ghes.c +10 -28
index f2d1cc7369f4..401789259f60 100644
@@ -425,10 +425,6 @@ static void get_hw_error_offsets(uint64_t ghes_addr,
                                  uint64_t *cper_addr,
                                  uint64_t *read_ack_register_addr)
 {
-    if (!ghes_addr) {
-        return;
-    }
-
     /*
      * non-HEST version supports only one source, so no need to change
      * the start offset based on the source ID. Also, we can't validate
@@ -517,27 +513,16 @@ static void get_ghes_source_offsets(uint16_t source_id,
 NotifierList acpi_generic_error_notifiers =
     NOTIFIER_LIST_INITIALIZER(error_device_notifiers);
 
-void ghes_record_cper_errors(const void *cper, size_t len,
+void ghes_record_cper_errors(AcpiGhesState *ags, const void *cper, size_t len,
                              uint16_t source_id, Error **errp)
 {
     uint64_t cper_addr = 0, read_ack_register_addr = 0, read_ack_register;
-    AcpiGedState *acpi_ged_state;
-    AcpiGhesState *ags;
 
     if (len > ACPI_GHES_MAX_RAW_DATA_LENGTH) {
         error_setg(errp, "GHES CPER record is too big: %zd", len);
         return;
     }
 
-    acpi_ged_state = ACPI_GED(object_resolve_path_type("", TYPE_ACPI_GED,
-                                                       NULL));
-    if (!acpi_ged_state) {
-        error_setg(errp, "Can't find ACPI_GED object");
-        return;
-    }
-    ags = &acpi_ged_state->ghes_state;
-
-
     if (!ags->use_hest_addr) {
         get_hw_error_offsets(le64_to_cpu(ags->hw_error_le),
                              &cper_addr, &read_ack_register_addr);
@@ -546,11 +531,6 @@ void ghes_record_cper_errors(const void *cper, size_t len,
                                 &cper_addr, &read_ack_register_addr, errp);
     }
 
-    if (!cper_addr) {
-        error_setg(errp, "can not find Generic Error Status Block");
-        return;
-    }
-
     cpu_physical_memory_read(read_ack_register_addr,
                              &read_ack_register, sizeof(read_ack_register));
 
@@ -576,7 +556,8 @@ void ghes_record_cper_errors(const void *cper, size_t len,
     notifier_list_notify(&acpi_generic_error_notifiers, NULL);
 }
 
-int acpi_ghes_memory_errors(uint16_t source_id, uint64_t physical_address)
+int acpi_ghes_memory_errors(AcpiGhesState *ags, uint16_t source_id,
+                            uint64_t physical_address)
 {
     /* Memory Error Section Type */
     const uint8_t guid[] =
@@ -602,7 +583,7 @@ int acpi_ghes_memory_errors(uint16_t source_id, uint64_t physical_address)
     acpi_ghes_build_append_mem_cper(block, physical_address);
 
     /* Report the error */
-    ghes_record_cper_errors(block->data, block->len, source_id, &errp);
+    ghes_record_cper_errors(ags, block->data, block->len, source_id, &errp);
 
     g_array_free(block, true);
 
@@ -614,7 +595,7 @@ int acpi_ghes_memory_errors(uint16_t source_id, uint64_t physical_address)
     return 0;
 }
 
-bool acpi_ghes_present(void)
+AcpiGhesState *acpi_ghes_get_state(void)
 {
     AcpiGedState *acpi_ged_state;
     AcpiGhesState *ags;
@@ -623,11 +604,12 @@ bool acpi_ghes_present(void)
                                                        NULL));
 
     if (!acpi_ged_state) {
-        return false;
+        return NULL;
     }
     ags = &acpi_ged_state->ghes_state;
-    if (!ags->hw_error_le && !ags->hest_addr_le)
-        return false;
 
-    return true;
+    if (!ags->hw_error_le && !ags->hest_addr_le) {
+        return NULL;
+    }
+    return ags;
 }
include/hw/acpi/ghes.h +3 -2
index 219aa7ab4fe0..276f9dc076d9 100644
@@ -99,15 +99,17 @@ void acpi_build_hest(AcpiGhesState *ags, GArray *table_data,
                      const char *oem_id, const char *oem_table_id);
 void acpi_ghes_add_fw_cfg(AcpiGhesState *vms, FWCfgState *s,
                           GArray *hardware_errors);
-int acpi_ghes_memory_errors(uint16_t source_id, uint64_t error_physical_addr);
-void ghes_record_cper_errors(const void *cper, size_t len,
+int acpi_ghes_memory_errors(AcpiGhesState *ags, uint16_t source_id,
+                            uint64_t error_physical_addr);
+void ghes_record_cper_errors(AcpiGhesState *ags, const void *cper, size_t len,

include/hw/acpi/ghes.h void acpi_build_hest(AcpiGhesState *ags, GArray *table_data, · line 111

Quoted 10 lines
include/hw/acpi/ghes.h +3 -3
                              uint16_t source_id, Error **errp);
 
 /**
- * acpi_ghes_present: Report whether ACPI GHES table is present
+ * acpi_ghes_get_state: Get a pointer for ACPI ghes state
  *
- * Returns: true if the system has an ACPI GHES table and it is
- * safe to call acpi_ghes_memory_errors() to record a memory error.
+ * Returns: a pointer to ghes state if the system has an ACPI GHES table,
+ * it is enabled and it is safe to call acpi_ghes_memory_errors() to record
      ^^^^^^^^^^^^^ can't link 'it' with anything, I'd drop this

include/hw/acpi/ghes.h void acpi_build_hest(AcpiGhesState *ags, GArray *table_data, · line 112

Quoted 1 line
include/hw/acpi/ghes.h +1 -0
+ * a memory error. Returns false, otherwise.
                              ^^^ NULL ??
Quoted 32 lines
include/hw/acpi/ghes.h +1 -1
  */
-bool acpi_ghes_present(void);
+AcpiGhesState *acpi_ghes_get_state(void);
 #endif
target/arm/kvm.c +5 -2
index da30bdbb2349..80ca7779797b 100644
@@ -2366,10 +2366,12 @@ void kvm_arch_on_sigbus_vcpu(CPUState *c, int code, void *addr)
 {
     ram_addr_t ram_addr;
     hwaddr paddr;
+    AcpiGhesState *ags;
 
     assert(code == BUS_MCEERR_AR || code == BUS_MCEERR_AO);
 
-    if (acpi_ghes_present() && addr) {
+    ags = acpi_ghes_get_state();
+    if (ags && addr) {
         ram_addr = qemu_ram_addr_from_host(addr);
         if (ram_addr != RAM_ADDR_INVALID &&
             kvm_physical_memory_addr_from_host(c->kvm_state, addr, &paddr)) {
@@ -2387,7 +2389,8 @@ void kvm_arch_on_sigbus_vcpu(CPUState *c, int code, void *addr)
              */
             if (code == BUS_MCEERR_AR) {
                 kvm_cpu_synchronize_state(c);
-                if (!acpi_ghes_memory_errors(ACPI_HEST_SRC_ID_SEA, paddr)) {
+                if (!acpi_ghes_memory_errors(ags, ACPI_HEST_SRC_ID_SEA,
+                                             paddr)) {
                     kvm_inject_arm_sea(c);
                 } else {
                     error_report("failed to record the error");
#10 lore raw

Re: [PATCH v4 04/14] acpi/ghes: don't hard-code the number of sources for HEST table

In reply to Mauro Carvalho Chehab
Quoted 130 lines · On Fri, 21 Feb 2025 15:35:13 +0100 Mauro Carvalho Chehab…

The current code is actually dependent on having just one error structure with a single source, as any change there would cause migration issues.

As the number of sources should be arch-dependent, as it will depend on what kind of notifications will exist, and how many errors can be reported at the same time, change the logic to be more flexible, allowing the number of sources to be defined when building the HEST table by the caller.

---
 hw/acpi/ghes.c           | 38 +++++++++++++++++++++-----------------
 hw/arm/virt-acpi-build.c |  8 +++++++-
 include/hw/acpi/ghes.h   | 17 ++++++++++++-----
 3 files changed, 40 insertions(+), 23 deletions(-)
hw/acpi/ghes.c +21 -16
index 7efea519f766..4a4ea8f4be90 100644
@@ -238,17 +238,17 @@ ghes_gen_err_data_uncorrectable_recoverable(GArray *block,
  * See docs/specs/acpi_hest_ghes.rst for blobs format.
  */
 static void build_ghes_error_table(AcpiGhesState *ags, GArray *hardware_errors,
-                                   BIOSLinker *linker)
+                                   BIOSLinker *linker, int num_sources)
 {
     int i, error_status_block_offset;
 
     /* Build error_block_address */
-    for (i = 0; i < ACPI_GHES_ERROR_SOURCE_COUNT; i++) {
+    for (i = 0; i < num_sources; i++) {
         build_append_int_noprefix(hardware_errors, 0, sizeof(uint64_t));
     }
 
     /* Build read_ack_register */
-    for (i = 0; i < ACPI_GHES_ERROR_SOURCE_COUNT; i++) {
+    for (i = 0; i < num_sources; i++) {
         /*
          * Initialize the value of read_ack_register to 1, so GHES can be
          * writable after (re)boot.
@@ -263,13 +263,13 @@ static void build_ghes_error_table(AcpiGhesState *ags, GArray *hardware_errors,
 
     /* Reserve space for Error Status Data Block */
     acpi_data_push(hardware_errors,
-        ACPI_GHES_MAX_RAW_DATA_LENGTH * ACPI_GHES_ERROR_SOURCE_COUNT);
+        ACPI_GHES_MAX_RAW_DATA_LENGTH * num_sources);
 
     /* Tell guest firmware to place hardware_errors blob into RAM */
     bios_linker_loader_alloc(linker, ACPI_HW_ERROR_FW_CFG_FILE,
                              hardware_errors, sizeof(uint64_t), false);
 
-    for (i = 0; i < ACPI_GHES_ERROR_SOURCE_COUNT; i++) {
+    for (i = 0; i < num_sources; i++) {
         /*
          * Tell firmware to patch error_block_address entries to point to
          * corresponding "Generic Error Status Block"
@@ -295,12 +295,14 @@ static void build_ghes_error_table(AcpiGhesState *ags, GArray *hardware_errors,
 }
 
 /* Build Generic Hardware Error Source version 2 (GHESv2) */
-static void build_ghes_v2(GArray *table_data,
-                          BIOSLinker *linker,
-                          enum AcpiGhesNotifyType notify,
-                          uint16_t source_id)
+static void build_ghes_v2_entry(GArray *table_data,
+                                BIOSLinker *linker,
+                                const AcpiNotificationSourceId *notif_src,
+                                uint16_t index, int num_sources)
 {
     uint64_t address_offset;
+    const uint16_t notify = notif_src->notify;
+    const uint16_t source_id = notif_src->source_id;
 
     /*
      * Type:
@@ -331,7 +333,7 @@ static void build_ghes_v2(GArray *table_data,
                                    address_offset + GAS_ADDR_OFFSET,
                                    sizeof(uint64_t),
                                    ACPI_HW_ERROR_FW_CFG_FILE,
-                                   source_id * sizeof(uint64_t));
+                                   index * sizeof(uint64_t));
 
     /* Notification Structure */
     build_ghes_hw_error_notification(table_data, notify);
@@ -351,8 +353,7 @@ static void build_ghes_v2(GArray *table_data,
                                    address_offset + GAS_ADDR_OFFSET,
                                    sizeof(uint64_t),
                                    ACPI_HW_ERROR_FW_CFG_FILE,
-                                   (ACPI_GHES_ERROR_SOURCE_COUNT + source_id)
-                                   * sizeof(uint64_t));
+                                   (num_sources + index) * sizeof(uint64_t));
 
     /*
      * Read Ack Preserve field
@@ -368,22 +369,26 @@ static void build_ghes_v2(GArray *table_data,
 void acpi_build_hest(AcpiGhesState *ags, GArray *table_data,
                      GArray *hardware_errors,
                      BIOSLinker *linker,
+                     const AcpiNotificationSourceId *notif_source,
+                     int num_sources,
                      const char *oem_id, const char *oem_table_id)
 {
     AcpiTable table = { .sig = "HEST", .rev = 1,
                         .oem_id = oem_id, .oem_table_id = oem_table_id };
     uint32_t hest_offset;
+    int i;
 
     hest_offset = table_data->len;
 
-    build_ghes_error_table(ags, hardware_errors, linker);
+    build_ghes_error_table(ags, hardware_errors, linker, num_sources);
 
     acpi_table_begin(&table, table_data);
 
     /* Error Source Count */
-    build_append_int_noprefix(table_data, ACPI_GHES_ERROR_SOURCE_COUNT, 4);
-    build_ghes_v2(table_data, linker,
-                  ACPI_GHES_NOTIFY_SEA, ACPI_HEST_SRC_ID_SEA);
+    build_append_int_noprefix(table_data, num_sources, 4);
+    for (i = 0; i < num_sources; i++) {
+        build_ghes_v2_entry(table_data, linker, &notif_source[i], i, num_sources);
+    }
 
     acpi_table_end(linker, &table);
 

hw/acpi/ghes.c void ghes_record_cper_errors(const void *cper, size_t len, · line 532

Quoted 4 lines
hw/acpi/ghes.c +0 -1
@@ -529,7 +534,6 @@ void ghes_record_cper_errors(const void *cper, size_t len,
     }
     ags = &acpi_ged_state->ghes_state;
 
-    assert(ACPI_GHES_ERROR_SOURCE_COUNT == 1);

I'd also remove one blank line here

Quoted 66 lines
hw/acpi/ghes.c +0 -0
     if (!ags->use_hest_addr) {
         get_hw_error_offsets(le64_to_cpu(ags->hw_error_le),
hw/arm/virt-acpi-build.c +7 -1
index 8ab8d11b6536..4439252e1a75 100644
@@ -893,6 +893,10 @@ static void acpi_align_size(GArray *blob, unsigned align)
     g_array_set_size(blob, ROUND_UP(acpi_data_len(blob), align));
 }
 
+static const AcpiNotificationSourceId hest_ghes_notify[] = {
+    { ACPI_HEST_SRC_ID_SYNC, ACPI_GHES_NOTIFY_SEA },
+};
+
 static
 void virt_acpi_build(VirtMachineState *vms, AcpiBuildTables *tables)
 {
@@ -956,7 +960,9 @@ void virt_acpi_build(VirtMachineState *vms, AcpiBuildTables *tables)
 
             acpi_add_table(table_offsets, tables_blob);
             acpi_build_hest(ags, tables_blob, tables->hardware_errors,
-                            tables->linker, vms->oem_id, vms->oem_table_id);
+                            tables->linker, hest_ghes_notify,
+                            ARRAY_SIZE(hest_ghes_notify),
+                            vms->oem_id, vms->oem_table_id);
         }
     }
 
include/hw/acpi/ghes.h +12 -5
index 2f06e433ce04..51c6b6b33327 100644
@@ -57,13 +57,18 @@ enum AcpiGhesNotifyType {
     ACPI_GHES_NOTIFY_RESERVED = 12
 };
 
-enum {
-    ACPI_HEST_SRC_ID_SEA = 0,
-    /* future ids go here */
-
-    ACPI_GHES_ERROR_SOURCE_COUNT
+/*
+ * ID numbers used to fill HEST source ID field
+ */
+enum AcpiGhesSourceID {
+    ACPI_HEST_SRC_ID_SYNC,
 };
 
+typedef struct AcpiNotificationSourceId {
+    enum AcpiGhesSourceID source_id;
+    enum AcpiGhesNotifyType notify;
+} AcpiNotificationSourceId;
+
 /*
  * AcpiGhesState stores an offset that will be used to fill HEST entries.
  *
@@ -86,6 +91,8 @@ typedef struct AcpiGhesState {
 void acpi_build_hest(AcpiGhesState *ags, GArray *table_data,
                      GArray *hardware_errors,
                      BIOSLinker *linker,
+                     const AcpiNotificationSourceId * const notif_source,
+                     int num_sources,
                      const char *oem_id, const char *oem_table_id);
 void acpi_ghes_add_fw_cfg(AcpiGhesState *vms, FWCfgState *s,
                           GArray *hardware_errors);
#16 lore raw

Re: [PATCH v4 08/14] acpi/generic_event_device: add logic to detect if HEST addr is available

In reply to Mauro Carvalho Chehab
Quoted 18 lines · On Fri, 21 Feb 2025 15:35:17 +0100 Mauro Carvalho Chehab…

Create a new property (x-has-hest-addr) and use it to detect if the GHES table offsets can be calculated from the HEST address (qemu 10.0 and upper) or via the legacy way via an offset obtained from the hardware_errors firmware file.

---
 hw/acpi/generic_event_device.c |  1 +
 hw/arm/virt-acpi-build.c       | 18 ++++++++++++++++--
 hw/core/machine.c              |  2 ++
 3 files changed, 19 insertions(+), 2 deletions(-)
hw/acpi/generic_event_device.c +0 -0
index 5346cae573b7..14d8513a5440 100644

hw/acpi/generic_event_device.c static void acpi_ged_send_event(AcpiDeviceIf *adev, AcpiEventStatusBits ev) · line 321

Quoted 4 lines
hw/acpi/generic_event_device.c +1 -0
@@ -318,6 +318,7 @@ static void acpi_ged_send_event(AcpiDeviceIf *adev, AcpiEventStatusBits ev)
 
 static const Property acpi_ged_properties[] = {
     DEFINE_PROP_UINT32("ged-event", AcpiGedState, ged_event_bitmap, 0),
+    DEFINE_PROP_BOOL("x-has-hest-addr", AcpiGedState, ghes_state.use_hest_addr, false),

you below set it for 9.2 to false, so
shouldn't it be set to true by default here?

Quoted 68 lines
hw/acpi/generic_event_device.c +0 -0
 };
 
 static const VMStateDescription vmstate_memhp_state = {
hw/arm/virt-acpi-build.c +16 -2
index 4439252e1a75..9de51105a513 100644
@@ -897,6 +897,10 @@ static const AcpiNotificationSourceId hest_ghes_notify[] = {
     { ACPI_HEST_SRC_ID_SYNC, ACPI_GHES_NOTIFY_SEA },
 };
 
+static const AcpiNotificationSourceId hest_ghes_notify_9_2[] = {
+    { ACPI_HEST_SRC_ID_SYNC, ACPI_GHES_NOTIFY_SEA },
+};
+
 static
 void virt_acpi_build(VirtMachineState *vms, AcpiBuildTables *tables)
 {
@@ -950,7 +954,9 @@ void virt_acpi_build(VirtMachineState *vms, AcpiBuildTables *tables)
     build_dbg2(tables_blob, tables->linker, vms);
 
     if (vms->ras) {
+        static const AcpiNotificationSourceId *notify;
         AcpiGedState *acpi_ged_state;
+        unsigned int notify_sz;
         AcpiGhesState *ags;
 
         acpi_ged_state = ACPI_GED(object_resolve_path_type("", TYPE_ACPI_GED,
@@ -959,9 +965,17 @@ void virt_acpi_build(VirtMachineState *vms, AcpiBuildTables *tables)
             ags = &acpi_ged_state->ghes_state;
 
             acpi_add_table(table_offsets, tables_blob);
+
+            if (!ags->use_hest_addr) {
+                notify = hest_ghes_notify_9_2;
+                notify_sz = ARRAY_SIZE(hest_ghes_notify_9_2);
+            } else {
+                notify = hest_ghes_notify;
+                notify_sz = ARRAY_SIZE(hest_ghes_notify);
+            }
+
             acpi_build_hest(ags, tables_blob, tables->hardware_errors,
-                            tables->linker, hest_ghes_notify,
-                            ARRAY_SIZE(hest_ghes_notify),
+                            tables->linker, notify, notify_sz,
                             vms->oem_id, vms->oem_table_id);
         }
     }
hw/core/machine.c +2 -0
index 02cff735b3fb..7a11e0f87b11 100644
@@ -34,6 +34,7 @@
 #include "hw/virtio/virtio-pci.h"
 #include "hw/virtio/virtio-net.h"
 #include "hw/virtio/virtio-iommu.h"
+#include "hw/acpi/generic_event_device.h"
 #include "audio/audio.h"
 
 GlobalProperty hw_compat_9_2[] = {
@@ -43,6 +44,7 @@ GlobalProperty hw_compat_9_2[] = {
     { "virtio-balloon-pci-non-transitional", "vectors", "0" },
     { "virtio-mem-pci", "vectors", "0" },
     { "migration", "multifd-clean-tls-termination", "false" },
+    { TYPE_ACPI_GED, "x-has-hest-addr", "false" },
 };
 const size_t hw_compat_9_2_len = G_N_ELEMENTS(hw_compat_9_2);
 
#22 lore raw

Re: [PATCH v4 10/14] tests/acpi: virt: allow acpi table changes for a new table: HEST

In reply to Mauro Carvalho Chehab
Quoted 12 lines · On Fri, 21 Feb 2025 15:35:19 +0100 Mauro Carvalho Chehab…

The DSDT table will also be affected by such change.

---
 tests/qtest/bios-tables-test-allowed-diff.h | 1 +
 1 file changed, 1 insertion(+)
tests/qtest/bios-tables-test-allowed-diff.h +0 -0
index dfb8523c8bf4..1a4c2277bd5a 100644

tests/qtest/bios-tables-test-allowed-diff.h line 2

Quoted 2 lines
tests/qtest/bios-tables-test-allowed-diff.h +1 -0
@@ -1 +1,2 @@
 /* List of comma-separated changed AML files to ignore */
+"tests/data/acpi/aarch64/virt/DSDT",

this and flowing update would also include HEST table, once you enable 'ras' in tests

#24 lore raw

Re: [PATCH v4 11/14] arm/virt: Wire up a GED error device for ACPI / GHES

In reply to Mauro Carvalho Chehab
Quoted 32 lines · On Fri, 21 Feb 2025 15:35:20 +0100 Mauro Carvalho Chehab…

Adds support to ARM virtualization to allow handling generic error ACPI Event via GED & error source device.

It is aligned with Linux Kernel patch:
https://lore.kernel.org/lkml/[email protected]/

---

Changes from v8:

- Added a call to the function that produces GHES generic records, as this is now added earlier in this series.

---
 hw/acpi/generic_event_device.c |  2 +-
 hw/arm/virt-acpi-build.c       |  1 +
 hw/arm/virt.c                  | 12 +++++++++++-
 include/hw/arm/virt.h          |  1 +
 4 files changed, 14 insertions(+), 2 deletions(-)
hw/acpi/generic_event_device.c +0 -0
index 180eebbce1cd..f5e899155d34 100644

hw/acpi/generic_event_device.c static void acpi_ged_send_event(AcpiDeviceIf *adev, AcpiEventStatusBits ev) · line 334

Quoted 5 lines
hw/acpi/generic_event_device.c +1 -1
@@ -331,7 +331,7 @@ static void acpi_ged_send_event(AcpiDeviceIf *adev, AcpiEventStatusBits ev)
 
 static const Property acpi_ged_properties[] = {
     DEFINE_PROP_UINT32("ged-event", AcpiGedState, ged_event_bitmap, 0),
-    DEFINE_PROP_BOOL("x-has-hest-addr", AcpiGedState, ghes_state.use_hest_addr, false),
+    DEFINE_PROP_BOOL("x-has-hest-addr", AcpiGedState, ghes_state.use_hest_addr, true),

irrelevant to this patch, see comment in 8/14

Quoted 64 lines
hw/acpi/generic_event_device.c +0 -0
 };
 
 static const VMStateDescription vmstate_memhp_state = {
hw/arm/virt-acpi-build.c +1 -0
index 9de51105a513..4f174795ed60 100644
@@ -861,6 +861,7 @@ build_dsdt(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)
     }
 
     acpi_dsdt_add_power_button(scope);
+    aml_append(scope, aml_error_device());
 #ifdef CONFIG_TPM
     acpi_dsdt_add_tpm(scope, vms);
 #endif
hw/arm/virt.c +11 -1
index 4a5a9666e916..3faf32f900b5 100644
@@ -678,7 +678,7 @@ static inline DeviceState *create_acpi_ged(VirtMachineState *vms)
     DeviceState *dev;
     MachineState *ms = MACHINE(vms);
     int irq = vms->irqmap[VIRT_ACPI_GED];
-    uint32_t event = ACPI_GED_PWR_DOWN_EVT;
+    uint32_t event = ACPI_GED_PWR_DOWN_EVT | ACPI_GED_ERROR_EVT;
 
     if (ms->ram_slots) {
         event |= ACPI_GED_MEM_HOTPLUG_EVT;
@@ -1010,6 +1010,13 @@ static void virt_powerdown_req(Notifier *n, void *opaque)
     }
 }
 
+static void virt_generic_error_req(Notifier *n, void *opaque)
+{
+    VirtMachineState *s = container_of(n, VirtMachineState, generic_error_notifier);
+
+    acpi_send_event(s->acpi_dev, ACPI_GENERIC_ERROR);
+}
+
 static void create_gpio_keys(char *fdt, DeviceState *pl061_dev,
                              uint32_t phandle)
 {
@@ -2404,6 +2411,9 @@ static void machvirt_init(MachineState *machine)
 
     if (has_ged && aarch64 && firmware_loaded && virt_is_acpi_enabled(vms)) {
         vms->acpi_dev = create_acpi_ged(vms);
+        vms->generic_error_notifier.notify = virt_generic_error_req;
+        notifier_list_add(&acpi_generic_error_notifiers,
+                          &vms->generic_error_notifier);
     } else {
         create_gpio_devices(vms, VIRT_GPIO, sysmem);
     }
include/hw/arm/virt.h +1 -0
index c8e94e6aedc9..f3cf28436770 100644
@@ -176,6 +176,7 @@ struct VirtMachineState {
     DeviceState *gic;
     DeviceState *acpi_dev;
     Notifier powerdown_notifier;
+    Notifier generic_error_notifier;
     PCIBus *bus;
     char *oem_id;
     char *oem_table_id;
#31 lore raw
In reply to Igor Mammedov
Quoted 2 lines · On Wed, 26 Feb 2025 15:51:43 +0100 Igor Mammedov <[email protected]> wrote:

On Wed, 26 Feb 2025 15:39:13 +0100
Mauro Carvalho Chehab <[email protected]> wrote:

[...]

Quoted 2 lines

PS: do not respin until I've finish this review.

finished

Quoted 84 lines
Quoted 83 lines
Quoted 82 lines
Quoted 81 lines

---
v4:
- added an extra comment for AcpiGhesState structure;
- patches reordered;
- no functional changes, just code shift between the patches in this series.

v3:
- addressed more nits;
- hest_add_le now points to the beginning of HEST table;
- removed HEST from tests/data/acpi;
- added an extra patch to not use fw_cfg with virt-10.0 for hw_error_le

v2:
- address some nits;
- improved ags cleanup patch and removed ags.present field;
- added some missing le*_to_cpu() calls;
- update date at copyright for new files to 2024-2025;
- qmp command changed to: inject-ghes-v2-error ans since updated to 10.0;
- added HEST and DSDT tables after the changes to make check target happy. (two patches: first one whitelisting such tables; second one removing from whitelist and updating/adding such tables to tests/data/acpi)

Mauro Carvalho Chehab (14):
acpi/ghes: prepare to change the way HEST offsets are calculated acpi/ghes: add a firmware file with HEST address acpi/ghes: Use HEST table offsets when preparing GHES records acpi/ghes: don't hard-code the number of sources for HEST table acpi/ghes: add a notifier to notify when error data is ready acpi/ghes: create an ancillary acpi_ghes_get_state() function acpi/generic_event_device: Update GHES migration to cover hest addr acpi/generic_event_device: add logic to detect if HEST addr is
available
acpi/generic_event_device: add an APEI error device tests/acpi: virt: allow acpi table changes for a new table: HEST arm/virt: Wire up a GED error device for ACPI / GHES tests/acpi: virt: add a HEST table to aarch64 virt and update DSDT qapi/acpi-hest: add an interface to do generic CPER error injection scripts/ghes_inject: add a script to generate GHES error inject

 MAINTAINERS                                   |  10 +
 hw/acpi/Kconfig                               |   5 +
 hw/acpi/aml-build.c                           |  10 +
 hw/acpi/generic_event_device.c                |  43 ++
 hw/acpi/ghes-stub.c                           |   7 +-
 hw/acpi/ghes.c                                | 231 ++++--
 hw/acpi/ghes_cper.c                           |  38 +
 hw/acpi/ghes_cper_stub.c                      |  19 +
 hw/acpi/meson.build                           |   2 +
 hw/arm/virt-acpi-build.c                      |  37 +-
 hw/arm/virt.c                                 |  19 +-
 hw/core/machine.c                             |   2 +
 include/hw/acpi/acpi_dev_interface.h          |   1 +
 include/hw/acpi/aml-build.h                   |   2 +
 include/hw/acpi/generic_event_device.h        |   1 +
 include/hw/acpi/ghes.h                        |  54 +-
 include/hw/arm/virt.h                         |   2 +
 qapi/acpi-hest.json                           |  35 +
 qapi/meson.build                              |   1 +
 qapi/qapi-schema.json                         |   1 +
 scripts/arm_processor_error.py                | 476 ++++++++++++
 scripts/ghes_inject.py                        |  51 ++
 scripts/qmp_helper.py                         | 702 ++++++++++++++++++
 target/arm/kvm.c                              |   7 +-
 tests/data/acpi/aarch64/virt/DSDT             | Bin 5196 -> 5240 bytes
 .../data/acpi/aarch64/virt/DSDT.acpihmatvirt  | Bin 5282 -> 5326 bytes
 tests/data/acpi/aarch64/virt/DSDT.memhp       | Bin 6557 -> 6601 bytes
 tests/data/acpi/aarch64/virt/DSDT.pxb         | Bin 7679 -> 7723 bytes
 tests/data/acpi/aarch64/virt/DSDT.topology    | Bin 5398 -> 5442 bytes
 29 files changed, 1677 insertions(+), 79 deletions(-)
 create mode 100644 hw/acpi/ghes_cper.c
 create mode 100644 hw/acpi/ghes_cper_stub.c
 create mode 100644 qapi/acpi-hest.json
 create mode 100644 scripts/arm_processor_error.py
 create mode 100755 scripts/ghes_inject.py
 create mode 100755 scripts/qmp_helper.py
#17 lore raw

Re: [PATCH v4 08/14] acpi/generic_event_device: add logic to detect if HEST addr is available

In reply to Igor Mammedov

Em Wed, 26 Feb 2025 16:52:26 +0100
Igor Mammedov <[email protected]> escreveu:

Quoted 10 lines
Quoted 6 lines · On Fri, 21 Feb 2025 15:35:17 +0100 Mauro Carvalho Chehab…
hw/acpi/generic_event_device.c +0 -0
index 5346cae573b7..14d8513a5440 100644
@@ -318,6 +318,7 @@ static void acpi_ged_send_event(AcpiDeviceIf *adev, AcpiEventStatusBits ev)
 
Quoted 6 lines

hw/acpi/generic_event_device.c static void acpi_ged_send_event(AcpiDeviceIf *adev, AcpiEventStatusBits ev) · line 321

Quoted 3 lines
hw/acpi/generic_event_device.c +1 -0
 static const Property acpi_ged_properties[] = {
     DEFINE_PROP_UINT32("ged-event", AcpiGedState, ged_event_bitmap, 0),
+    DEFINE_PROP_BOOL("x-has-hest-addr", AcpiGedState, ghes_state.use_hest_addr, false),  

you below set it for 9.2 to false, so
shouldn't it be set to true by default here?

Yes, but it is too early to do that here, as the DSDT table was not updated to contain the GED device.

We're switching it to true later on, at patch 11::

d8c44ee13fbe ("arm/virt: Wire up a GED error device for ACPI / GHES")

Thanks,
Mauro

#18 lore raw

Re: [PATCH v4 08/14] acpi/generic_event_device: add logic to detect if HEST addr is available

Em Thu, 27 Feb 2025 08:19:27 +0100
Mauro Carvalho Chehab <[email protected]> escreveu:

Quoted 20 lines

Em Wed, 26 Feb 2025 16:52:26 +0100
Igor Mammedov <[email protected]> escreveu:

Quoted 10 lines
Quoted 6 lines · On Fri, 21 Feb 2025 15:35:17 +0100 Mauro Carvalho Chehab…
hw/acpi/generic_event_device.c +0 -0
index 5346cae573b7..14d8513a5440 100644
@@ -318,6 +318,7 @@ static void acpi_ged_send_event(AcpiDeviceIf *adev, AcpiEventStatusBits ev)
 
Quoted 6 lines

hw/acpi/generic_event_device.c static void acpi_ged_send_event(AcpiDeviceIf *adev, AcpiEventStatusBits ev) · line 321

Quoted 3 lines
hw/acpi/generic_event_device.c +1 -0
 static const Property acpi_ged_properties[] = {
     DEFINE_PROP_UINT32("ged-event", AcpiGedState, ged_event_bitmap, 0),
+    DEFINE_PROP_BOOL("x-has-hest-addr", AcpiGedState, ghes_state.use_hest_addr, false),    

you below set it for 9.2 to false, so
shouldn't it be set to true by default here?

Quoted 6 lines

Yes, but it is too early to do that here, as the DSDT table was not updated to contain the GED device.

We're switching it to true later on, at patch 11::

d8c44ee13fbe ("arm/virt: Wire up a GED error device for ACPI / GHES")

Hmm... too many rebases that on my head things are becoming shady ;-)

Originally, this was setting it to true, but you requested to move it to another patch during one of the patch reorder requests.

Anyway, after all those rebases, I guess it is now safe to set it to true here without breaking bisectability. I'll move the hunk back to this patch.

Thanks,
Mauro

#19 lore raw

Re: [PATCH v4 08/14] acpi/generic_event_device: add logic to detect if HEST addr is available

Quoted 29 lines · On Thu, 27 Feb 2025 08:26:38 +0100 Mauro Carvalho Chehab…

Em Thu, 27 Feb 2025 08:19:27 +0100
Mauro Carvalho Chehab <[email protected]> escreveu:

Quoted 26 lines

Em Wed, 26 Feb 2025 16:52:26 +0100
Igor Mammedov <[email protected]> escreveu:

Quoted 10 lines
Quoted 6 lines · On Fri, 21 Feb 2025 15:35:17 +0100 Mauro Carvalho Chehab…
hw/acpi/generic_event_device.c +0 -0
index 5346cae573b7..14d8513a5440 100644
@@ -318,6 +318,7 @@ static void acpi_ged_send_event(AcpiDeviceIf *adev, AcpiEventStatusBits ev)
 
Quoted 6 lines

hw/acpi/generic_event_device.c static void acpi_ged_send_event(AcpiDeviceIf *adev, AcpiEventStatusBits ev) · line 321

Quoted 3 lines
hw/acpi/generic_event_device.c +1 -0
 static const Property acpi_ged_properties[] = {
     DEFINE_PROP_UINT32("ged-event", AcpiGedState, ged_event_bitmap, 0),
+    DEFINE_PROP_BOOL("x-has-hest-addr", AcpiGedState, ghes_state.use_hest_addr, false),      

you below set it for 9.2 to false, so
shouldn't it be set to true by default here?

Yes, but it is too early to do that here, as the DSDT table was not updated to contain the GED device.

We're switching it to true later on, at patch 11::

d8c44ee13fbe ("arm/virt: Wire up a GED error device for ACPI / GHES")

After sleeping on it,
what you did here is totally correct.

You are right, We can't really flip switch to true here since without 11/14 APEI will stop working properly.

Perhaps add to commit message a note explaining why it's false in this patch and where it will be set to true.

Quoted 13 lines

Hmm... too many rebases that on my head things are becoming shady ;-)

Originally, this was setting it to true, but you requested to move it to another patch during one of the patch reorder requests.

Anyway, after all those rebases, I guess it is now safe to set it to true here without breaking bisectability. I'll move the hunk back to this patch.

Thanks,
Mauro

#32 lore raw
In reply to Mauro Carvalho Chehab
Quoted 79 lines · On Fri, 21 Feb 2025 15:35:09 +0100 Mauro Carvalho Chehab…

Now that the ghes preparation patches were merged, let's add support for error injection.

On this series, the first 6 patches chang to the math used to calculate offsets at HEST table and hardware_error firmware file, together with its migration code. Migration tested with both latest QEMU released kernel and upstream, on both directions.

The next patches add a new QAPI to allow injecting GHESv2 errors, and a script using such QAPI
to inject ARM Processor Error records.

---
v4:
- added an extra comment for AcpiGhesState structure;
- patches reordered;
- no functional changes, just code shift between the patches in this series.

v3:
- addressed more nits;
- hest_add_le now points to the beginning of HEST table;
- removed HEST from tests/data/acpi;
- added an extra patch to not use fw_cfg with virt-10.0 for hw_error_le

v2:
- address some nits;
- improved ags cleanup patch and removed ags.present field;
- added some missing le*_to_cpu() calls;
- update date at copyright for new files to 2024-2025;
- qmp command changed to: inject-ghes-v2-error ans since updated to 10.0;
- added HEST and DSDT tables after the changes to make check target happy. (two patches: first one whitelisting such tables; second one removing from whitelist and updating/adding such tables to tests/data/acpi)

Mauro Carvalho Chehab (14):
acpi/ghes: prepare to change the way HEST offsets are calculated acpi/ghes: add a firmware file with HEST address acpi/ghes: Use HEST table offsets when preparing GHES records acpi/ghes: don't hard-code the number of sources for HEST table acpi/ghes: add a notifier to notify when error data is ready acpi/ghes: create an ancillary acpi_ghes_get_state() function acpi/generic_event_device: Update GHES migration to cover hest addr acpi/generic_event_device: add logic to detect if HEST addr is
available
acpi/generic_event_device: add an APEI error device tests/acpi: virt: allow acpi table changes for a new table: HEST arm/virt: Wire up a GED error device for ACPI / GHES tests/acpi: virt: add a HEST table to aarch64 virt and update DSDT qapi/acpi-hest: add an interface to do generic CPER error injection scripts/ghes_inject: add a script to generate GHES error inject

 MAINTAINERS                                   |  10 +
 hw/acpi/Kconfig                               |   5 +
 hw/acpi/aml-build.c                           |  10 +
 hw/acpi/generic_event_device.c                |  43 ++
 hw/acpi/ghes-stub.c                           |   7 +-
 hw/acpi/ghes.c                                | 231 ++++--
 hw/acpi/ghes_cper.c                           |  38 +
 hw/acpi/ghes_cper_stub.c                      |  19 +
 hw/acpi/meson.build                           |   2 +
 hw/arm/virt-acpi-build.c                      |  37 +-
 hw/arm/virt.c                                 |  19 +-
 hw/core/machine.c                             |   2 +
 include/hw/acpi/acpi_dev_interface.h          |   1 +
 include/hw/acpi/aml-build.h                   |   2 +
 include/hw/acpi/generic_event_device.h        |   1 +
 include/hw/acpi/ghes.h                        |  54 +-
 include/hw/arm/virt.h                         |   2 +
 qapi/acpi-hest.json                           |  35 +
 qapi/meson.build                              |   1 +
 qapi/qapi-schema.json                         |   1 +
 scripts/arm_processor_error.py                | 476 ++++++++++++
 scripts/ghes_inject.py                        |  51 ++
 scripts/qmp_helper.py                         | 702 ++++++++++++++++++
 target/arm/kvm.c                              |   7 +-
 tests/data/acpi/aarch64/virt/DSDT             | Bin 5196 -> 5240 bytes
 .../data/acpi/aarch64/virt/DSDT.acpihmatvirt  | Bin 5282 -> 5326 bytes
 tests/data/acpi/aarch64/virt/DSDT.memhp       | Bin 6557 -> 6601 bytes
 tests/data/acpi/aarch64/virt/DSDT.pxb         | Bin 7679 -> 7723 bytes
Quoted 9 lines
 tests/data/acpi/aarch64/virt/DSDT.topology    | Bin 5398 -> 5442 bytes
 29 files changed, 1677 insertions(+), 79 deletions(-)
 create mode 100644 hw/acpi/ghes_cper.c
 create mode 100644 hw/acpi/ghes_cper_stub.c
 create mode 100644 qapi/acpi-hest.json
 create mode 100644 scripts/arm_processor_error.py
 create mode 100755 scripts/ghes_inject.py
 create mode 100755 scripts/qmp_helper.py

once you enable, ras in tests as 1st patches and fixup minor issues please try to do patch by patch compile/bios-tables-test testing, to avoid unnecessary respin in case at table change crept in somewhere unnoticed.

#33 lore raw

Em Thu, 27 Feb 2025 10:54:54 +0100
Igor Mammedov <[email protected]> escreveu:

Quoted 92 lines
Quoted 79 lines · On Fri, 21 Feb 2025 15:35:09 +0100 Mauro Carvalho Chehab…

Now that the ghes preparation patches were merged, let's add support for error injection.

On this series, the first 6 patches chang to the math used to calculate offsets at HEST table and hardware_error firmware file, together with its migration code. Migration tested with both latest QEMU released kernel and upstream, on both directions.

The next patches add a new QAPI to allow injecting GHESv2 errors, and a script using such QAPI
to inject ARM Processor Error records.

---
v4:
- added an extra comment for AcpiGhesState structure;
- patches reordered;
- no functional changes, just code shift between the patches in this series.

v3:
- addressed more nits;
- hest_add_le now points to the beginning of HEST table;
- removed HEST from tests/data/acpi;
- added an extra patch to not use fw_cfg with virt-10.0 for hw_error_le

v2:
- address some nits;
- improved ags cleanup patch and removed ags.present field;
- added some missing le*_to_cpu() calls;
- update date at copyright for new files to 2024-2025;
- qmp command changed to: inject-ghes-v2-error ans since updated to 10.0;
- added HEST and DSDT tables after the changes to make check target happy. (two patches: first one whitelisting such tables; second one removing from whitelist and updating/adding such tables to tests/data/acpi)

Mauro Carvalho Chehab (14):
acpi/ghes: prepare to change the way HEST offsets are calculated acpi/ghes: add a firmware file with HEST address acpi/ghes: Use HEST table offsets when preparing GHES records acpi/ghes: don't hard-code the number of sources for HEST table acpi/ghes: add a notifier to notify when error data is ready acpi/ghes: create an ancillary acpi_ghes_get_state() function acpi/generic_event_device: Update GHES migration to cover hest addr acpi/generic_event_device: add logic to detect if HEST addr is
available
acpi/generic_event_device: add an APEI error device tests/acpi: virt: allow acpi table changes for a new table: HEST arm/virt: Wire up a GED error device for ACPI / GHES tests/acpi: virt: add a HEST table to aarch64 virt and update DSDT qapi/acpi-hest: add an interface to do generic CPER error injection scripts/ghes_inject: add a script to generate GHES error inject

 MAINTAINERS                                   |  10 +
 hw/acpi/Kconfig                               |   5 +
 hw/acpi/aml-build.c                           |  10 +
 hw/acpi/generic_event_device.c                |  43 ++
 hw/acpi/ghes-stub.c                           |   7 +-
 hw/acpi/ghes.c                                | 231 ++++--
 hw/acpi/ghes_cper.c                           |  38 +
 hw/acpi/ghes_cper_stub.c                      |  19 +
 hw/acpi/meson.build                           |   2 +
 hw/arm/virt-acpi-build.c                      |  37 +-
 hw/arm/virt.c                                 |  19 +-
 hw/core/machine.c                             |   2 +
 include/hw/acpi/acpi_dev_interface.h          |   1 +
 include/hw/acpi/aml-build.h                   |   2 +
 include/hw/acpi/generic_event_device.h        |   1 +
 include/hw/acpi/ghes.h                        |  54 +-
 include/hw/arm/virt.h                         |   2 +
 qapi/acpi-hest.json                           |  35 +
 qapi/meson.build                              |   1 +
 qapi/qapi-schema.json                         |   1 +
 scripts/arm_processor_error.py                | 476 ++++++++++++
 scripts/ghes_inject.py                        |  51 ++
 scripts/qmp_helper.py                         | 702 ++++++++++++++++++
 target/arm/kvm.c                              |   7 +-
 tests/data/acpi/aarch64/virt/DSDT             | Bin 5196 -> 5240 bytes
 .../data/acpi/aarch64/virt/DSDT.acpihmatvirt  | Bin 5282 -> 5326 bytes
 tests/data/acpi/aarch64/virt/DSDT.memhp       | Bin 6557 -> 6601 bytes
 tests/data/acpi/aarch64/virt/DSDT.pxb         | Bin 7679 -> 7723 bytes
Quoted 9 lines
 tests/data/acpi/aarch64/virt/DSDT.topology    | Bin 5398 -> 5442 bytes
 29 files changed, 1677 insertions(+), 79 deletions(-)
 create mode 100644 hw/acpi/ghes_cper.c
 create mode 100644 hw/acpi/ghes_cper_stub.c
 create mode 100644 qapi/acpi-hest.json
 create mode 100644 scripts/arm_processor_error.py
 create mode 100755 scripts/ghes_inject.py
 create mode 100755 scripts/qmp_helper.py
Quoted 3 lines

once you enable, ras in tests as 1st patches and fixup minor issues please try to do patch by patch compile/bios-tables-test testing, to avoid unnecessary respin in case at table change crept in somewhere unnoticed.

Just submitted v5.

I took some extra care to avoid bisect issues. Still checkpatch had some warnings, but they seemed false positives.

Thanks,
Mauro

#3 lore raw

Re: [PATCH v4 01/14] acpi/ghes: prepare to change the way HEST offsets are calculated

In reply to Igor Mammedov

Em Wed, 26 Feb 2025 15:37:14 +0100
Igor Mammedov <[email protected]> escreveu:

Quoted 20 lines
Quoted 5 lines · On Fri, 21 Feb 2025 15:35:10 +0100 Mauro Carvalho Chehab…
hw/arm/virt-acpi-build.c +0 -0
index 3ac8f8e17861..8ab8d11b6536 100644

hw/arm/virt-acpi-build.c void virt_acpi_build(VirtMachineState *vms, AcpiBuildTables *tables) · line 952

Quoted 10 lines
hw/arm/virt-acpi-build.c +4 -3
@@ -946,9 +946,18 @@ void virt_acpi_build(VirtMachineState *vms, AcpiBuildTables *tables)
     build_dbg2(tables_blob, tables->linker, vms);
 
     if (vms->ras) {
-        acpi_add_table(table_offsets, tables_blob);
-        acpi_build_hest(tables_blob, tables->hardware_errors, tables->linker,
-                        vms->oem_id, vms->oem_table_id);
+        AcpiGedState *acpi_ged_state;
+        AcpiGhesState *ags;
+
+        acpi_ged_state = ACPI_GED(object_resolve_path_type("", TYPE_ACPI_GED,  

^^^ will explode if object_resolve_path_type() returns NULL

Quoted 5 lines

hw/arm/virt-acpi-build.c void virt_acpi_build(VirtMachineState *vms, AcpiBuildTables *tables) · line 953

Quoted 1 line
hw/arm/virt-acpi-build.c +1 -0
+                                                       NULL));  

it's also expensive load-wise.
You have access to vms with ged pointer here, use that (search for 'acpi_ged_state = ACPI_GED' example)

Ok, but the state binding on ghes were designed to use ACPI_GED. I moved the code that it is using ACPI_GED() to the beginning of v5 series, just after the HEST table test addition.

With that, ACPI_GED() is now used only on two places inside ghes:

- at virt_acpi_build(), during VM initialization;
- at acpi_ghes_get_state().

If you want to replace it by some other solution, IMO we should do it on some separate series, as this is not related to neither error injection nor with offset calculation to get read ack address.

Quoted 8 lines

hw/arm/virt-acpi-build.c void virt_acpi_build(VirtMachineState *vms, AcpiBuildTables *tables) · line 954

Quoted 1 line
hw/arm/virt-acpi-build.c +1 -0
+        if (acpi_ged_state) {  

hence, this check is not really needed, we have to have GED at this point or abort

earlier code that instantiates GED should take care of cleanly exiting if it failed to create GED so we would never get to missing GED here

I dropped this check on v5.

Thanks,
Mauro

#4 lore raw

Re: [PATCH v4 01/14] acpi/ghes: prepare to change the way HEST offsets are calculated

Quoted 29 lines · On Thu, 27 Feb 2025 12:45:38 +0100 Mauro Carvalho Chehab…

Em Wed, 26 Feb 2025 15:37:14 +0100
Igor Mammedov <[email protected]> escreveu:

Quoted 20 lines
Quoted 5 lines · On Fri, 21 Feb 2025 15:35:10 +0100 Mauro Carvalho Chehab…
hw/arm/virt-acpi-build.c +0 -0
index 3ac8f8e17861..8ab8d11b6536 100644

hw/arm/virt-acpi-build.c void virt_acpi_build(VirtMachineState *vms, AcpiBuildTables *tables) · line 952

Quoted 10 lines
hw/arm/virt-acpi-build.c +4 -3
@@ -946,9 +946,18 @@ void virt_acpi_build(VirtMachineState *vms, AcpiBuildTables *tables)
     build_dbg2(tables_blob, tables->linker, vms);
 
     if (vms->ras) {
-        acpi_add_table(table_offsets, tables_blob);
-        acpi_build_hest(tables_blob, tables->hardware_errors, tables->linker,
-                        vms->oem_id, vms->oem_table_id);
+        AcpiGedState *acpi_ged_state;
+        AcpiGhesState *ags;
+
+        acpi_ged_state = ACPI_GED(object_resolve_path_type("", TYPE_ACPI_GED,    

^^^ will explode if object_resolve_path_type() returns NULL

Quoted 5 lines

hw/arm/virt-acpi-build.c void virt_acpi_build(VirtMachineState *vms, AcpiBuildTables *tables) · line 953

Quoted 1 line
hw/arm/virt-acpi-build.c +1 -0
+                                                       NULL));    

it's also expensive load-wise.
You have access to vms with ged pointer here, use that (search for 'acpi_ged_state = ACPI_GED' example)

Quoted 7 lines

Ok, but the state binding on ghes were designed to use ACPI_GED. I moved the code that it is using ACPI_GED() to the beginning of v5 series, just after the HEST table test addition.

With that, ACPI_GED() is now used only on two places inside ghes:

- at virt_acpi_build(), during VM initialization;

ACPI_GED() is not expensive, what I'm referring to is
object_resolve_path_type()

given it's a new code and virt_acpi_build() has direct access to ged pointer, there is no excuse to use object_resolve_path_type().

all you have to do here is:

hw/arm/virt-acpi-build.c +1 -2
index e6328af5d2..040d875d4e 100644
@@ -949,8 +949,7 @@ void virt_acpi_build(VirtMachineState *vms, AcpiBuildTables *tables)
         AcpiGedState *acpi_ged_state;
         AcpiGhesState *ags;
 
-        acpi_ged_state = ACPI_GED(object_resolve_path_type("", TYPE_ACPI_GED,
-                                                       NULL));
+        acpi_ged_state = ACPI_GED(vms->acpi_dev);
         ags = &acpi_ged_state->ghes_state;
         if (ags) {
             acpi_add_table(table_offsets, tables_blob);
Quoted 1 line

- at acpi_ghes_get_state().

this one is different, it doesn't have access to ged so it has to look up for it.

Quoted 19 lines

If you want to replace it by some other solution, IMO we should do it on some separate series, as this is not related to neither error injection nor with offset calculation to get read ack address.

Quoted 8 lines

hw/arm/virt-acpi-build.c void virt_acpi_build(VirtMachineState *vms, AcpiBuildTables *tables) · line 954

Quoted 1 line
hw/arm/virt-acpi-build.c +1 -0
+        if (acpi_ged_state) {    

hence, this check is not really needed, we have to have GED at this point or abort

earlier code that instantiates GED should take care of cleanly exiting if it failed to create GED so we would never get to missing GED here

I dropped this check on v5.

Thanks,
Mauro