Skip to contentSkip to conversation

firmware: stratix10-rsu: expose QSPI flash size and erase size from firmware

PATCH Superseded [email protected] 2 participants 6 messages May 15 – May 20 Intel STRATIX10 firmware drivers

v2 of 4 Superseded Latest is v4 →

lore
Share & tools
lore
#0 lore raw

v2 cover firmware: stratix10-rsu: expose QSPI flash size and erase size from firmware

From: Tze Yee Ng <[email protected]>

This series lets user space read per-device QSPI flash size and erase size for the Intel Stratix 10 RSU driver, using the existing service layer SMC path.

Patch 1 documents the new sysfs attributes (size0-size3 and erase_size0-erase_size3).

Patch 2 implements COMMAND_RSU_GET_DEVICE_INFO in the RSU and service drivers, caches up to four devices in the driver, and adds the sysfs files.

Patch 3 fixes probe/remove teardown after the async client is registered:
remove the async client before freeing the SVC channel so async state is not leaked. It also corrects probe return values on the affected error paths.

Changes in v2:
- No code changes in all patches, only documentation updates to fix commit title and description in Patch 3.

Tze Yee Ng (3):
Documentation: ABI: add stratix10-rsu QSPI size and erase_size sysfs
firmware: stratix10-rsu: Add flash device info retrieval via SMC
firmware: stratix10-rsu: remove async client before freeing channel on
probe errors

 .../sysfs-devices-platform-stratix10-rsu      |  58 +++++
 drivers/firmware/stratix10-rsu.c              | 210 +++++++++++++++++-
 drivers/firmware/stratix10-svc.c              |  94 +++++++-
 include/linux/firmware/intel/stratix10-smc.h  |  25 ++-
 .../firmware/intel/stratix10-svc-client.h     |  12 +-
 5 files changed, 382 insertions(+), 17 deletions(-)
Signature · 1 line
2.43.7
#1 lore raw

PATCH v2 1/3 Documentation: ABI: add stratix10-rsu QSPI size and erase_size sysfs

From: Tze Yee Ng <[email protected]>

Document the eight read-only sysfs files (size0-size3, erase_size0- erase_size3) under platform/stratix10-rsu: flash size and erase size in bytes, 32-bit hex per line, EIO when the value is not available.

---
 .../sysfs-devices-platform-stratix10-rsu      | 58 +++++++++++++++++++
 1 file changed, 58 insertions(+)
Documentation/ABI/testing/sysfs-devices-platform-stratix10-rsu +58 -0
index ee253b033280..b93341e4471d 100644
@@ -172,3 +172,61 @@ Contact:	Richard Gong <[email protected]>
 Description:
 		(RO) max retry parameter is stored in the firmware
 		decision IO section, as a byte located at offset 0x18c.
+
+What:		/sys/devices/platform/stratix10-rsu.0/size0
+Date:		May 2026
+KernelVersion:	7.1
+Contact:	Tze Yee Ng <[email protected]>
+Description:
+		(RO) Flash size in bytes for QSPI device 0 (32-bit hex, one
+		line).  EIO if unavailable.
+
+What:		/sys/devices/platform/stratix10-rsu.0/size1
+Date:		May 2026
+KernelVersion:	7.1
+Contact:	Tze Yee Ng <[email protected]>
+Description:
+		(RO) Like size0 for device 1.
+
+What:		/sys/devices/platform/stratix10-rsu.0/size2
+Date:		May 2026
+KernelVersion:	7.1
+Contact:	Tze Yee Ng <[email protected]>
+Description:
+		(RO) Like size0 for device 2.
+
+What:		/sys/devices/platform/stratix10-rsu.0/size3
+Date:		May 2026
+KernelVersion:	7.1
+Contact:	Tze Yee Ng <[email protected]>
+Description:
+		(RO) Like size0 for device 3.
+
+What:		/sys/devices/platform/stratix10-rsu.0/erase_size0
+Date:		May 2026
+KernelVersion:	7.1
+Contact:	Tze Yee Ng <[email protected]>
+Description:
+		(RO) Erase size in bytes for QSPI device 0 (32-bit hex, one
+		line).  EIO if unavailable.
+
+What:		/sys/devices/platform/stratix10-rsu.0/erase_size1
+Date:		May 2026
+KernelVersion:	7.1
+Contact:	Tze Yee Ng <[email protected]>
+Description:
+		(RO) Like erase_size0 for device 1.
+
+What:		/sys/devices/platform/stratix10-rsu.0/erase_size2
+Date:		May 2026
+KernelVersion:	7.1
+Contact:	Tze Yee Ng <[email protected]>
+Description:
+		(RO) Like erase_size0 for device 2.
+
+What:		/sys/devices/platform/stratix10-rsu.0/erase_size3
+Date:		May 2026
+KernelVersion:	7.1
+Contact:	Tze Yee Ng <[email protected]>
+Description:
+		(RO) Like erase_size0 for device 3.
Signature · 1 line
2.43.7
#2 lore raw

PATCH v2 2/3 firmware: stratix10-rsu: Add flash device info retrieval via SMC

In reply to [email protected]

From: Tze Yee Ng <[email protected]>

Extend the Intel Remote System Update (RSU) driver to retrieve the device info table through an ARM SMC call to the service layer.

The table reports flash size and erase size for multiple devices.

---
 drivers/firmware/stratix10-rsu.c              | 199 +++++++++++++++++-
 drivers/firmware/stratix10-svc.c              |  94 ++++++++-
 include/linux/firmware/intel/stratix10-smc.h  |  25 ++-
 .../firmware/intel/stratix10-svc-client.h     |  12 +-
 4 files changed, 314 insertions(+), 16 deletions(-)
drivers/firmware/stratix10-rsu.c +194 -5
index e1912108a0fe..6c5f952f48d8 100644
@@ -7,17 +7,24 @@
 #include <linux/arm-smccc.h>
 #include <linux/bitfield.h>
 #include <linux/completion.h>
+#include <linux/delay.h>
+#include <linux/firmware/intel/stratix10-svc-client.h>
+#include <linux/kernel.h>
 #include <linux/kobject.h>
 #include <linux/module.h>
 #include <linux/mutex.h>
 #include <linux/of.h>
 #include <linux/platform_device.h>
-#include <linux/firmware/intel/stratix10-svc-client.h>
 #include <linux/string.h>
 #include <linux/sysfs.h>
-#include <linux/delay.h>
 
-#define RSU_ERASE_SIZE_MASK		GENMASK_ULL(63, 32)
+/*
+ * INTEL_SIP_SMC_RSU_GET_DEVICE_INFO packs each flash word as:
+ *   [63:32] erase_size, [31:0] size (see stratix10-smc.h).
+ */
+#define RSU_DEVICE_INFO_SIZE_MASK	GENMASK_ULL(31, 0)
+#define RSU_DEVICE_INFO_ERASE_SIZE_MASK	GENMASK_ULL(63, 32)
+
 #define RSU_DCMF0_MASK			GENMASK_ULL(31, 0)
 #define RSU_DCMF1_MASK			GENMASK_ULL(63, 32)
 #define RSU_DCMF2_MASK			GENMASK_ULL(31, 0)
@@ -33,11 +40,31 @@
 #define INVALID_DCMF_VERSION		0xFF
 #define INVALID_DCMF_STATUS		0xFFFFFFFF
 #define INVALID_SPT_ADDRESS		0x0
+#define INVALID_DEVICE_INFO		(~0U)
 
 #define RSU_RETRY_SLEEP_MS		(1U)
 #define RSU_ASYNC_MSG_RETRY		(3U)
 #define RSU_GET_SPT_RESP_LEN		(4 * sizeof(unsigned int))
 
+struct flash_device_info {
+	unsigned int size;
+	unsigned int erase_size;
+};
+
+/**
+ * rsu_device_info_set_from_packed() - Decode one RSU device-info SMC word
+ * @di: slot to fill
+ * @packed: register value: [63:32] erase_size, [31:0] size
+ *	(INTEL_SIP_SMC_RSU_GET_DEVICE_INFO)
+ */
+static void rsu_device_info_set_from_packed(struct flash_device_info *di,
+					    unsigned long packed)
+{
+	di->size = (unsigned int)FIELD_GET(RSU_DEVICE_INFO_SIZE_MASK, packed);
+	di->erase_size = (unsigned int)FIELD_GET(RSU_DEVICE_INFO_ERASE_SIZE_MASK,
+						 packed);
+}
+
 typedef void (*rsu_callback)(struct stratix10_svc_client *client,
 			     struct stratix10_svc_cb_data *data);
 /**
@@ -60,6 +87,8 @@ typedef void (*rsu_callback)(struct stratix10_svc_client *client,
  * @dcmf_status.dcmf1: dcmf1 status
  * @dcmf_status.dcmf2: dcmf2 status
  * @dcmf_status.dcmf3: dcmf3 status
+ * @device_info: per-device flash information array; each entry contains
+ * size and erase size for one flash device
  * @retry_counter: the current image's retry counter
  * @max_retry: the preset max retry value
  * @spt0_address: address of spt0
@@ -93,6 +122,8 @@ struct stratix10_rsu_priv {
 		unsigned int dcmf3;
 	} dcmf_status;
 
+	struct flash_device_info device_info[4];
+
 	unsigned int retry_counter;
 	unsigned int max_retry;
 
@@ -100,6 +131,20 @@ struct stratix10_rsu_priv {
 	unsigned long spt1_address;
 };
 
+/**
+ * rsu_device_info_invalidate() - Mark all cached QSPI device slots invalid
+ * @priv: RSU private data
+ */
+static void rsu_device_info_invalidate(struct stratix10_rsu_priv *priv)
+{
+	unsigned int i;
+
+	for (i = 0; i < ARRAY_SIZE(priv->device_info); i++) {
+		priv->device_info[i].size = INVALID_DEVICE_INFO;
+		priv->device_info[i].erase_size = INVALID_DEVICE_INFO;
+	}
+}
+
 typedef void (*rsu_async_callback)(struct device *dev,
 	struct stratix10_rsu_priv *priv, struct stratix10_svc_cb_data *data);
 
@@ -229,8 +274,57 @@ static void rsu_dcmf_status_callback(struct stratix10_svc_client *client,
 }
 
 /**
- * rsu_async_get_spt_table_callback() - Callback to be used by the rsu_async_send()
- * to retrieve the SPT table information.
+ * rsu_get_device_info_callback() - Callback from Intel service layer for
+ * getting the QSPI device info
+ * @client: pointer to client
+ * @data: pointer to callback data structure
+ *
+ * Callback from Intel service layer for QSPI device info.
+ * @data->kaddr1 points to struct arm_smccc_1_2_regs on SVC_STATUS_OK or
+ * SVC_STATUS_ERROR; it is NULL on SVC_STATUS_NO_SUPPORT (unsupported command).
+ */
+static void rsu_get_device_info_callback(struct stratix10_svc_client *client,
+					 struct stratix10_svc_cb_data *data)
+{
+	struct stratix10_rsu_priv *priv = client->priv;
+	struct arm_smccc_1_2_regs *res = data->kaddr1;
+
+	if (data->status == BIT(SVC_STATUS_OK)) {
+		if (!res) {
+			dev_err(client->dev,
+				"COMMAND_RSU_GET_DEVICE_INFO: missing result payload\n");
+			rsu_device_info_invalidate(priv);
+			complete(&priv->completion);
+			return;
+		}
+
+		rsu_device_info_set_from_packed(&priv->device_info[0], res->a1);
+		rsu_device_info_set_from_packed(&priv->device_info[1], res->a2);
+		rsu_device_info_set_from_packed(&priv->device_info[2], res->a3);
+		rsu_device_info_set_from_packed(&priv->device_info[3], res->a4);
+
+	} else if (data->status == BIT(SVC_STATUS_NO_SUPPORT)) {
+		dev_warn(client->dev,
+			 "COMMAND_RSU_GET_DEVICE_INFO not supported by firmware\n");
+		rsu_device_info_invalidate(priv);
+	} else {
+		if (res)
+			dev_err(client->dev,
+				"COMMAND_RSU_GET_DEVICE_INFO returned 0x%lX\n",
+				res->a0);
+		else
+			dev_err(client->dev,
+				"COMMAND_RSU_GET_DEVICE_INFO failed with status 0x%X\n",
+				data->status);
+		rsu_device_info_invalidate(priv);
+	}
+
+	complete(&priv->completion);
+}
+
+/**
+ * rsu_async_get_spt_table_callback() - Callback to be used by the
+ * rsu_async_send() to retrieve the SPT table information.
  * @dev: pointer to device object
  * @priv: pointer to priv object
  * @data: pointer to callback data structure
@@ -637,6 +731,75 @@ static ssize_t notify_store(struct device *dev,
 	return count;
 }
 
+static ssize_t rsu_device_info_show(struct device *dev, char *buf,
+				    unsigned int index, bool erase_size)
+{
+	struct stratix10_rsu_priv *priv = dev_get_drvdata(dev);
+	unsigned int value;
+
+	if (!priv)
+		return -ENODEV;
+
+	if (index >= ARRAY_SIZE(priv->device_info))
+		return -EINVAL;
+
+	value = erase_size ? priv->device_info[index].erase_size :
+			     priv->device_info[index].size;
+
+	if (value == INVALID_DEVICE_INFO)
+		return -EIO;
+
+	return sysfs_emit(buf, "0x%08x\n", value);
+}
+
+static ssize_t size0_show(struct device *dev,
+			  struct device_attribute *attr, char *buf)
+{
+	return rsu_device_info_show(dev, buf, 0, false);
+}
+
+static ssize_t size1_show(struct device *dev,
+			  struct device_attribute *attr, char *buf)
+{
+	return rsu_device_info_show(dev, buf, 1, false);
+}
+
+static ssize_t size2_show(struct device *dev,
+			  struct device_attribute *attr, char *buf)
+{
+	return rsu_device_info_show(dev, buf, 2, false);
+}
+
+static ssize_t size3_show(struct device *dev,
+			  struct device_attribute *attr, char *buf)
+{
+	return rsu_device_info_show(dev, buf, 3, false);
+}
+
+static ssize_t erase_size0_show(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	return rsu_device_info_show(dev, buf, 0, true);
+}
+
+static ssize_t erase_size1_show(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	return rsu_device_info_show(dev, buf, 1, true);
+}
+
+static ssize_t erase_size2_show(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	return rsu_device_info_show(dev, buf, 2, true);
+}
+
+static ssize_t erase_size3_show(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	return rsu_device_info_show(dev, buf, 3, true);
+}
+
 static ssize_t spt0_address_show(struct device *dev,
 				 struct device_attribute *attr, char *buf)
 {
@@ -681,6 +844,14 @@ static DEVICE_ATTR_RO(dcmf0_status);
 static DEVICE_ATTR_RO(dcmf1_status);
 static DEVICE_ATTR_RO(dcmf2_status);
 static DEVICE_ATTR_RO(dcmf3_status);
+static DEVICE_ATTR_RO(size0);
+static DEVICE_ATTR_RO(size1);
+static DEVICE_ATTR_RO(size2);
+static DEVICE_ATTR_RO(size3);
+static DEVICE_ATTR_RO(erase_size0);
+static DEVICE_ATTR_RO(erase_size1);
+static DEVICE_ATTR_RO(erase_size2);
+static DEVICE_ATTR_RO(erase_size3);
 static DEVICE_ATTR_WO(reboot_image);
 static DEVICE_ATTR_WO(notify);
 static DEVICE_ATTR_RO(spt0_address);
@@ -703,6 +874,14 @@ static struct attribute *rsu_attrs[] = {
 	&dev_attr_dcmf1_status.attr,
 	&dev_attr_dcmf2_status.attr,
 	&dev_attr_dcmf3_status.attr,
+	&dev_attr_size0.attr,
+	&dev_attr_size1.attr,
+	&dev_attr_size2.attr,
+	&dev_attr_size3.attr,
+	&dev_attr_erase_size0.attr,
+	&dev_attr_erase_size1.attr,
+	&dev_attr_erase_size2.attr,
+	&dev_attr_erase_size3.attr,
 	&dev_attr_reboot_image.attr,
 	&dev_attr_notify.attr,
 	&dev_attr_spt0_address.attr,
@@ -743,6 +922,7 @@ static int stratix10_rsu_probe(struct platform_device *pdev)
 	priv->max_retry = INVALID_RETRY_COUNTER;
 	priv->spt0_address = INVALID_SPT_ADDRESS;
 	priv->spt1_address = INVALID_SPT_ADDRESS;
+	rsu_device_info_invalidate(priv);
 
 	mutex_init(&priv->lock);
 	priv->chan = stratix10_svc_request_channel_byname(&priv->client,
@@ -795,6 +975,15 @@ static int stratix10_rsu_probe(struct platform_device *pdev)
 		stratix10_svc_free_channel(priv->chan);
 	}
 
+	/* get QSPI device info from firmware */
+	ret = rsu_send_msg(priv, COMMAND_RSU_GET_DEVICE_INFO, 0,
+			   rsu_get_device_info_callback);
+	if (ret) {
+		dev_err(dev, "Error, getting QSPI Device Info %i\n", ret);
+		stratix10_svc_remove_async_client(priv->chan);
+		stratix10_svc_free_channel(priv->chan);
+		return ret;
+	}
 
 	ret = rsu_send_async_msg(dev, priv, COMMAND_RSU_GET_SPT_TABLE, 0,
 				 rsu_async_get_spt_table_callback);
drivers/firmware/stratix10-svc.c +85 -9

160 lines not on this page · raw message

include/linux/firmware/intel/stratix10-smc.h +24 -1
index 935dba3633b5..7455ed1d4708 100644
@@ -429,6 +429,29 @@ INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_COMPLETED_WRITE)
 #define INTEL_SIP_SMC_RSU_DCMF_STATUS \
 	INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_RSU_DCMF_STATUS)
 
+/**
+ * Request INTEL_SIP_SMC_RSU_GET_DEVICE_INFO
+ *
+ * Sync call used by service driver at EL1 to query QSPI device info from FW
+ *
+ * Call register usage:
+ * a0 INTEL_SIP_SMC_RSU_GET_DEVICE_INFO
+ * a1-7 not used
+ *
+ * Return status
+ * a0 INTEL_SIP_SMC_STATUS_OK
+ * a1 erasesize0 | size0
+ * a2 erasesize1 | size1
+ * a3 erasesize2 | size2
+ * a4 erasesize3 | size3
+ * Or
+ *
+ * a0 INTEL_SIP_SMC_RSU_ERROR
+ */
+#define INTEL_SIP_SMC_FUNCID_RSU_GET_DEVICE_INFO 22
+#define INTEL_SIP_SMC_RSU_GET_DEVICE_INFO \
+	INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_RSU_GET_DEVICE_INFO)
+
 /**
  * Request INTEL_SIP_SMC_SERVICE_COMPLETED
  * Sync call to check if the secure world have completed service request
@@ -493,7 +516,7 @@ INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_COMPLETED_WRITE)
  * a3 not used
  */
 #define INTEL_SIP_SMC_FUNCID_MBOX_SEND_CMD 60
-	#define INTEL_SIP_SMC_MBOX_SEND_CMD \
+#define INTEL_SIP_SMC_MBOX_SEND_CMD \
 	INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_MBOX_SEND_CMD)
 
 /**
include/linux/firmware/intel/stratix10-svc-client.h +11 -1
index 91013161e9db..944362657282 100644
@@ -128,6 +128,10 @@ struct stratix10_svc_chan;
  * @COMMAND_RSU_DCMF_STATUS: query firmware for the DCMF status
  * return status is SVC_STATUS_OK or SVC_STATUS_ERROR
  *
+ * @COMMAND_RSU_GET_DEVICE_INFO: query firmware for QSPI device info;
+ * return status is SVC_STATUS_OK, SVC_STATUS_ERROR, or SVC_STATUS_NO_SUPPORT
+ * (unsupported command / firmware compatibility path in the service layer).
+ *
  * @COMMAND_RSU_GET_SPT_TABLE: query firmware for SPT table
  * return status is SVC_STATUS_OK or SVC_STATUS_ERROR
  *
@@ -170,6 +174,7 @@ enum stratix10_svc_command_code {
 	COMMAND_RSU_MAX_RETRY,
 	COMMAND_RSU_DCMF_VERSION,
 	COMMAND_RSU_DCMF_STATUS,
+	COMMAND_RSU_GET_DEVICE_INFO,
 	COMMAND_FIRMWARE_VERSION,
 	COMMAND_RSU_GET_SPT_TABLE,
 	/* for FCS */
@@ -219,7 +224,12 @@ struct stratix10_svc_command_config_type {
 /**
  * struct stratix10_svc_cb_data - callback data structure from service layer
  * @status: the status of sent command
- * @kaddr1: address of 1st completed data block
+ * @kaddr1: address of 1st completed data block, or command-specific payload.
+ *	For COMMAND_RSU_GET_DEVICE_INFO on SVC_STATUS_OK or SVC_STATUS_ERROR,
+ *	points to struct arm_smccc_1_2_regs filled by the SMC/HVC return
+ *	registers (a0 status, a1-a4 packed device words per
+ *	INTEL_SIP_SMC_RSU_GET_DEVICE_INFO).  On SVC_STATUS_NO_SUPPORT (older
+ *	firmware that does not handle this command), kaddr1 is NULL.
  * @kaddr2: address of 2nd completed data block
  * @kaddr3: address of 3rd completed data block
  */
Signature · 1 line
2.43.7
#3 lore raw

PATCH v2 3/3 firmware: stratix10-rsu: remove async client before freeing channel on probe errors

In reply to [email protected]

From: Tze Yee Ng <[email protected]>

After stratix10_svc_add_async_client() succeeds, probe error paths and remove() must call stratix10_svc_remove_async_client() before stratix10_svc_free_channel(). Otherwise async state is left allocated while the channel is released.

Fixes 15847537b623 ("firmware: stratix10-rsu: Migrate RSU driver to use stratix10 asynchronous framework.")

---
Changes in v2:
- Fix patch title.
- Move the fix description to the end of the patch.

---
 drivers/firmware/stratix10-rsu.c | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)
drivers/firmware/stratix10-rsu.c +10 -1
index 6c5f952f48d8..a0f679f73460 100644
@@ -958,21 +958,27 @@ static int stratix10_rsu_probe(struct platform_device *pdev)
 			   0, rsu_dcmf_version_callback);
 	if (ret) {
 		dev_err(dev, "Error, getting DCMF version %i\n", ret);
+		stratix10_svc_remove_async_client(priv->chan);
 		stratix10_svc_free_channel(priv->chan);
+		return ret;
 	}
 
 	ret = rsu_send_msg(priv, COMMAND_RSU_DCMF_STATUS,
 			   0, rsu_dcmf_status_callback);
 	if (ret) {
 		dev_err(dev, "Error, getting DCMF status %i\n", ret);
+		stratix10_svc_remove_async_client(priv->chan);
 		stratix10_svc_free_channel(priv->chan);
+		return ret;
 	}
 
 	ret = rsu_send_msg(priv, COMMAND_RSU_MAX_RETRY, 0,
 			   rsu_max_retry_callback);
 	if (ret) {
 		dev_err(dev, "Error, getting RSU max retry %i\n", ret);
+		stratix10_svc_remove_async_client(priv->chan);
 		stratix10_svc_free_channel(priv->chan);
+		return ret;
 	}
 
 	/* get QSPI device info from firmware */
@@ -989,16 +995,19 @@ static int stratix10_rsu_probe(struct platform_device *pdev)
 				 rsu_async_get_spt_table_callback);
 	if (ret) {
 		dev_err(dev, "Error, getting SPT table %i\n", ret);
+		stratix10_svc_remove_async_client(priv->chan);
 		stratix10_svc_free_channel(priv->chan);
+		return ret;
 	}
 
-	return ret;
+	return 0;
 }
 
 static void stratix10_rsu_remove(struct platform_device *pdev)
 {
 	struct stratix10_rsu_priv *priv = platform_get_drvdata(pdev);
 
+	stratix10_svc_remove_async_client(priv->chan);
 	stratix10_svc_free_channel(priv->chan);
 }
 
Signature · 1 line
2.43.7
maintainer
#4 lore raw
In reply to [email protected]

Hi Tze Yee,

Quoted 28 lines · On 5/14/26 21:11, [email protected] wrote:

From: Tze Yee Ng <[email protected]>

This series lets user space read per-device QSPI flash size and erase size for the Intel Stratix 10 RSU driver, using the existing service layer SMC path.

Patch 1 documents the new sysfs attributes (size0-size3 and erase_size0-erase_size3).

Patch 2 implements COMMAND_RSU_GET_DEVICE_INFO in the RSU and service drivers, caches up to four devices in the driver, and adds the sysfs files.

Patch 3 fixes probe/remove teardown after the async client is registered:
remove the async client before freeing the SVC channel so async state is not leaked. It also corrects probe return values on the affected error paths.

Changes in v2:
- No code changes in all patches, only documentation updates to fix commit title and description in Patch 3.

Tze Yee Ng (3):
Documentation: ABI: add stratix10-rsu QSPI size and erase_size sysfs
firmware: stratix10-rsu: Add flash device info retrieval via SMC
firmware: stratix10-rsu: remove async client before freeing channel on
probe errors

Quoted 7 lines
  .../sysfs-devices-platform-stratix10-rsu      |  58 +++++
  drivers/firmware/stratix10-rsu.c              | 210 +++++++++++++++++-
  drivers/firmware/stratix10-svc.c              |  94 +++++++-
  include/linux/firmware/intel/stratix10-smc.h  |  25 ++-
  .../firmware/intel/stratix10-svc-client.h     |  12 +-
  5 files changed, 382 insertions(+), 17 deletions(-)

I've applied the first 2 patches in this series, but for patch 3/3, please make the following update and re-send:

- You have marked a patch with a "Fixes:" tag for a commit that is in an older released kernel, yet you do not have a cc: stable line in the signed-off-by area at all, which means that the patch will not be applied to any older kernel releases. To properly fix this, please follow the documented rules in the Documentation/process/stable-kernel-rules.rst file for how to resolve this.

And I think for patch 3, it might be a :

Cc [email protected] # v6.18+,

but please double check.

Thanks,
Dinh

#5 lore raw
Quoted 51 lines · Dinh Nguyen

Hi Tze Yee,

Quoted 29 lines · On 5/14/26 21:11, [email protected] wrote:

From: Tze Yee Ng <[email protected]>

This series lets user space read per-device QSPI flash size and erase size for the Intel Stratix 10 RSU driver, using the existing service layer SMC path.

Patch 1 documents the new sysfs attributes (size0-size3 and erase_size0-erase_size3).

Patch 2 implements COMMAND_RSU_GET_DEVICE_INFO in the RSU and service drivers, caches up to four devices in the driver, and adds the sysfs files.

Patch 3 fixes probe/remove teardown after the async client is registered:
remove the async client before freeing the SVC channel so async state is not leaked. It also corrects probe return values on the affected error paths.

Changes in v2:
- No code changes in all patches, only documentation updates to fix commit
  title and description in Patch 3.

Tze Yee Ng (3):
   Documentation: ABI: add stratix10-rsu QSPI size and erase_size sysfs
   firmware: stratix10-rsu: Add flash device info retrieval via SMC
   firmware: stratix10-rsu: remove async client before freeing channel on probe errors

Quoted 7 lines

  .../sysfs-devices-platform-stratix10-rsu      |  58 +++++ drivers/firmware/stratix10-rsu.c              | 210 +++++++++++++++++- drivers/firmware/stratix10-svc.c              |  94 +++++++- include/linux/firmware/intel/stratix10-smc.h  |  25 ++- .../firmware/intel/stratix10-svc-client.h     |  12 +-

  5 files changed, 382 insertions(+), 17 deletions(-)

I've applied the first 2 patches in this series, but for patch 3/3, please make the following update and re-send:

- You have marked a patch with a "Fixes:" tag for a commit that is in an older released kernel, yet you do not have a cc: stable line in the signed-off-by area at all, which means that the patch will not be applied to any older kernel releases.  To properly fix this, please follow the documented rules in the Documentation/process/stable-kernel-rules.rst file for how to resolve this.

Quoted 10 lines

And I think for patch 3, it might be a :

Cc [email protected] # v6.18+,

but please double check.

Thanks,
Dinh

Added Cc: [email protected] # v6.19+ for the Fixes: tag in v3 patch.

Regards,
Tze Yee