indistinguishable column names ( BA Start Start Start Start )
hello,
does somebody know how we can have native (i.e. non translated) column field names in first line of output of pvs ?
in its current implementation, output is hard to read , difficult to distinguish and also not scriptable/parseable, as whitespace is used for field separator and there are fields which also contain whitespace themselves,and there also seems no way to add separators in between (like with printf) for separation/formatting
# pvs --units s -o+pv_ba_start,seg_start,seg_start_pe,pvseg_start PV VG Fmt Attr PSize PFree BA Start Start Start Start /dev/sdb VGrecycle lvm2 a-- 11720982528S 0S 0S 2097152S 1 0 /dev/sdb VGrecycle lvm2 a-- 11720982528S 0S 0S 2097152S 1 1 /dev/sdb VGrecycle lvm2 a-- 11720982528S 0S 0S 0S 0 5309 /dev/sdb VGrecycle lvm2 a-- 11720982528S 0S 0S 0S 0 5587 /dev/sdb VGrecycle lvm2 a-- 11720982528S 0S 0S 0S 0 5588
i mean like this:
# pvs --units s -o+pv_ba_start,seg_start,seg_start_pe,pvseg_start PV VG Fmt Attr PSize PFree pv_ba_start seg_start seg_start_pe pvseg_start /dev/sdb VGrecycle lvm2 a-- 11720982528S 0S 0S 2097152S 1 0 /dev/sdb VGrecycle lvm2 a-- 11720982528S 0S 0S 2097152S 1 1 /dev/sdb VGrecycle lvm2 a-- 11720982528S 0S 0S 0S 0 5309 /dev/sdb VGrecycle lvm2 a-- 11720982528S 0S 0S 0S 0 5587 /dev/sdb VGrecycle lvm2 a-- 11720982528S 0S 0S 0S 0 5588
furthermore, it's a little bit weird that some columns being printed by default when using -o, is there an easier way to remove those besides explictly removing them one by one with several -o options ? "-o-opt1,-opt2,..." doesn't work
# pvs --units s -o+pv_ba_start,seg_start,pvseg_start,seg_start_pe -o-vg_name -o-pv_name -o-pv_fmt -o-attr -o -pv_size -o -pv_free BA Start Start Start Start 0S 2097152S 0 1 0S 2097152S 1 1 0S 0S 5309 0 0S 0S 5587 0 0S 0S 5588 0
roland
_______________________________________________
linux-lvm mailing list
[email protected]
https://listman.redhat.com/mailman/listinfo/linux-lvm
read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/
Quoted 2 lines
furthermore, it's a little bit weird that some columns being printed by default when using -o, is
there an easier way to remove those besides explictly removing them one by one with several -o options ? "-o-opt1,-opt2,..." doesn't work
sorry for this noise, i was too dumb for that , "-o+opt1,opt2 -o-opt3,opt4" works as desired (as documented in manpage)
Quoted 1 line
themselves,and there also seems no way to add separators in between (like with printf) for separation/formatting
also sorry for this, as we can use --separator="," (apparently did have too much coffee and had overseen that in the manpage)
the question regarding native column headers/description remains
roland
Am 19.08.23 um 17:20 schrieb Roland:
Quoted 35 lines
hello,
does somebody know how we can have native (i.e. non translated) column field names in first line of output of pvs ?
in its current implementation, output is hard to read , difficult to distinguish and also not scriptable/parseable, as whitespace is used for field separator and there are fields which also contain whitespace themselves,and there also seems no way to add separators in between (like with printf) for separation/formatting
# pvs --units s -o+pv_ba_start,seg_start,seg_start_pe,pvseg_start PV VG Fmt Attr PSize PFree BA Start Start Start Start /dev/sdb VGrecycle lvm2 a-- 11720982528S 0S 0S 2097152S 1 0 /dev/sdb VGrecycle lvm2 a-- 11720982528S 0S 0S 2097152S 1 1 /dev/sdb VGrecycle lvm2 a-- 11720982528S 0S 0S 0S 0 5309 /dev/sdb VGrecycle lvm2 a-- 11720982528S 0S 0S 0S 0 5587 /dev/sdb VGrecycle lvm2 a-- 11720982528S 0S 0S 0S 0 5588i mean like this:
# pvs --units s -o+pv_ba_start,seg_start,seg_start_pe,pvseg_start PV VG Fmt Attr PSize PFree pv_ba_start seg_start seg_start_pe pvseg_start /dev/sdb VGrecycle lvm2 a-- 11720982528S 0S 0S 2097152S 1 0 /dev/sdb VGrecycle lvm2 a-- 11720982528S 0S 0S 2097152S 1 1 /dev/sdb VGrecycle lvm2 a-- 11720982528S 0S 0S 0S 0 5309 /dev/sdb VGrecycle lvm2 a-- 11720982528S 0S 0S 0S 0 5587 /dev/sdb VGrecycle lvm2 a-- 11720982528S 0S 0S 0S 0 5588furthermore, it's a little bit weird that some columns being printed by default when using -o, is there an easier way to remove those besides explictly removing them one by one with several -o options ? "-o-opt1,-opt2,..." doesn't work
# pvs --units s -o+pv_ba_start,seg_start,pvseg_start,seg_start_pe -o-vg_name -o-pv_name -o-pv_fmt -o-attr -o -pv_size -o -pv_free BA Start Start Start Start 0S 2097152S 0 1 0S 2097152S 1 1 0S 0S 5309 0 0S 0S 5587 0 0S 0S 5588 0
Quoted 2 lines
roland
_______________________________________________
linux-lvm mailing list
[email protected]
https://listman.redhat.com/mailman/listinfo/linux-lvm
read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/
Quoted 7 lines · Roland
furthermore, it's a little bit weird that some columns being printed by default when using -o, is there an easier way to remove those besides explictly removing them one by one with several -o options ? "-o-opt1,-opt2,..." doesn't work
sorry for this noise, i was too dumb for that , "-o+opt1,opt2 -o-opt3,opt4" works as desired (as documented in manpage)
Usually if you're interested in exact fields, you'd avoid the default options and just use "-o opt1,opt2,..." without +/-.
Quoted 3 lines
# pvs --units s -o+pv_ba_start,seg_start,seg_start_pe,pvseg_start PV VG Fmt Attr PSize PFree pv_ba_start seg_start seg_start_pe pvseg_start
It does sound better than some of the strange header abbreviations. It could also use the key words that appear with --nameprefixes.
Dave
_______________________________________________
linux-lvm mailing list
[email protected]
https://listman.redhat.com/mailman/listinfo/linux-lvm
read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/
Am 21.08.23 um 18:17 schrieb David Teigland:
Quoted 10 lines · Roland
Quoted 7 lines
furthermore, it's a little bit weird that some columns being printed by default when using -o, is there an easier way to remove those besides explictly removing them one by one with several -o options ? "-o-opt1,-opt2,..." doesn't work
sorry for this noise, i was too dumb for that , "-o+opt1,opt2 -o-opt3,opt4" works as desired (as documented in manpage)
Usually if you're interested in exact fields, you'd avoid the default options and just use "-o opt1,opt2,..." without +/-.
yes, that makes totally sense - there are default options, "+" adds some options,
"- removes some , and -o without "+/-" just makes it print exactly what we want.
totally straightforward if understood, i was just too lazy, sorry.
Quoted 5 lines
Quoted 3 lines
# pvs --units s -o+pv_ba_start,seg_start,seg_start_pe,pvseg_start PV VG Fmt Attr PSize PFree pv_ba_start seg_start seg_start_pe pvseg_startIt does sound better than some of the strange header abbreviations. It could also use the key words that appear with --nameprefixes.
i have found the place where to add an RFE and did that :
https://bugzilla.redhat.com/show_bug.cgi?id=2233336
thank you
roland
_______________________________________________
linux-lvm mailing list
[email protected]
https://listman.redhat.com/mailman/listinfo/linux-lvm
read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/
Hi Roland, is lvs --reportformat json or lvs --nameprefixes good enough?
Quoted 71 lines · Roland
Quoted 1 line
furthermore, it's a little bit weird that some columns being printed
by default when using -o, is
Quoted 1 line
there an easier way to remove those besides explictly removing them
one by one with several -o options ? "-o-opt1,-opt2,..." doesn't work
sorry for this noise, i was too dumb for that , "-o+opt1,opt2 -o-opt3,opt4" works as desired (as documented in manpage)
Quoted 1 line
themselves,and there also seems no way to add separators in between
(like with printf) for separation/formatting
also sorry for this, as we can use --separator="," (apparently did
have too much coffee and had overseen that in the manpage)the question regarding native column headers/description remains
roland
Am 19.08.23 um 17:20 schrieb Roland:
Quoted 52 lines
hello,
does somebody know how we can have native (i.e. non translated) column field names in first line of output of pvs ?
in its current implementation, output is hard to read , difficult to distinguish and also not scriptable/parseable, as whitespace is used for field separator and there are fields which also contain whitespace themselves,and there also seems no way to add separators in between (like with printf) for separation/formatting
# pvs --units s -o+pv_ba_start,seg_start,seg_start_pe,pvseg_start PV VG Fmt Attr PSize PFree BA Start Start Start Start /dev/sdb VGrecycle lvm2 a-- 11720982528S 0S 0S 2097152S 1 0 /dev/sdb VGrecycle lvm2 a-- 11720982528S 0S 0S 2097152S 1 1 /dev/sdb VGrecycle lvm2 a-- 11720982528S 0S 0S 0S 0 5309 /dev/sdb VGrecycle lvm2 a-- 11720982528S 0S 0S 0S 0 5587 /dev/sdb VGrecycle lvm2 a-- 11720982528S 0S 0S 0S 0 5588i mean like this:
# pvs --units s -o+pv_ba_start,seg_start,seg_start_pe,pvseg_start PV VG Fmt Attr PSize PFree pv_ba_start seg_start seg_start_pe pvseg_start /dev/sdb VGrecycle lvm2 a-- 11720982528S 0S 0S 2097152S 1 0 /dev/sdb VGrecycle lvm2 a-- 11720982528S 0S 0S 2097152S 1 1 /dev/sdb VGrecycle lvm2 a-- 11720982528S 0S 0S 0S 0 5309 /dev/sdb VGrecycle lvm2 a-- 11720982528S 0S 0S 0S 0 5587 /dev/sdb VGrecycle lvm2 a-- 11720982528S 0S 0S 0S 0 5588furthermore, it's a little bit weird that some columns being printed by default when using -o, is there an easier way to remove those besides explictly removing them one by one with several -o options ? "-o-opt1,-opt2,..." doesn't work
# pvs --units s -o+pv_ba_start,seg_start,pvseg_start,seg_start_pe -o-vg_name -o-pv_name -o-pv_fmt -o-attr -o -pv_size -o -pv_free BA Start Start Start Start 0S 2097152S 0 1 0S 2097152S 1 1 0S 0S 5309 0 0S 0S 5587 0 0S 0S 5588 0
Quoted 8 lines
Quoted 2 lines
roland
_______________________________________________
linux-lvm mailing list
[email protected]
https://listman.redhat.com/mailman/listinfo/linux-lvm
read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/
_______________________________________________
linux-lvm mailing list
[email protected]
https://listman.redhat.com/mailman/listinfo/linux-lvm
read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/
Hi,
Quoted 1 line
Hi Roland, is
lvs --reportformat jsonorlvs --nameprefixesgood
enough?
good when using scripting / automated processing - but not good, when we need it human readable.
i'd even would call it a bug, when using same strings for "translated" names.
would anybody accept something like this (just for saving column space) ? ok, that's a little bit over the top - but i wand to underline what i mean
getpersondetails -o forename, surname, streetname, cityname
name name name name
john doe highstreet washington
roland
Am 21.08.23 um 18:00 schrieb Marian Csontos:
Quoted 98 lines
Hi Roland, is
lvs --reportformat jsonorlvs --nameprefixesgood enough?On Sat, Aug 19, 2023 at 6:06 PM Roland <[email protected]> wrote:
> furthermore, it's a little bit weird that some columns being printed
by default when using -o, is
> there an easier way to remove those besides explictly removing them
one by one with several -o options ? "-o-opt1,-opt2,..." doesn't worksorry for this noise, i was too dumb for that , "-o+opt1,opt2 -o-opt3,opt4" works as desired (as documented in manpage)
> themselves,and there also seems no way to add separators in between
(like with printf) for separation/formattingalso sorry for this, as we can use --separator="," (apparently did have too much coffee and had overseen that in the manpage)
the question regarding native column headers/description remains
roland
Am 19.08.23 um 17:20 schrieb Roland:
> hello,
>
> does somebody know how we can have native (i.e. non translated) column
> field names in first line of output of pvs ?
>
> in its current implementation, output is hard to read , difficult to
> distinguish and also not scriptable/parseable, as whitespace is used
> for field separator and there are fields which also contain whitespace
> themselves,and there also seems no way to add separators in between > (like with printf) for separation/formatting
>
> # pvs --units s -o+pv_ba_start,seg_start,seg_start_pe,pvseg_start > PV VG Fmt Attr PSize PFree BA Start Start > Start Start
> /dev/sdb VGrecycle lvm2 a-- 11720982528S 0S 0S > 2097152S 1 0
> /dev/sdb VGrecycle lvm2 a-- 11720982528S 0S 0S > 2097152S 1 1
> /dev/sdb VGrecycle lvm2 a-- 11720982528S 0S 0S 0S 0 5309
> /dev/sdb VGrecycle lvm2 a-- 11720982528S 0S 0S 0S 0 5587
> /dev/sdb VGrecycle lvm2 a-- 11720982528S 0S 0S 0S 0 5588
>
> i mean like this:
>
> # pvs --units s -o+pv_ba_start,seg_start,seg_start_pe,pvseg_start > PV VG Fmt Attr PSize PFreepv_ba_start>seg_startseg_start_pepvseg_start
> /dev/sdb VGrecycle lvm2 a-- 11720982528S 0S 0S > 2097152S 1 0
> /dev/sdb VGrecycle lvm2 a-- 11720982528S 0S 0S > 2097152S 1 1
> /dev/sdb VGrecycle lvm2 a-- 11720982528S 0S 0S 0S 0
> 5309
> /dev/sdb VGrecycle lvm2 a-- 11720982528S 0S 0S 0S > 0 5587
> /dev/sdb VGrecycle lvm2 a-- 11720982528S 0S 0S 0S > 0 5588
>
> furthermore, it's a little bit weird that some columns being printed
> by default when using -o, is there an easier way to remove those > besides explictly removing them one by one with several -o options ?
> "-o-opt1,-opt2,..." doesn't work
>
> # pvs --units s -o+pv_ba_start,seg_start,pvseg_start,seg_start_pe > -o-vg_name -o-pv_name -o-pv_fmt -o-attr -o -pv_size -o -pv_free > BA Start Start Start Start
> 0S 2097152S 0 1
> 0S 2097152S 1 1
> 0S 0S 5309 0
> 0S 0S 5587 0
> 0S 0S 5588 0
>
> roland
>
_______________________________________________
linux-lvm mailing list
[email protected]
https://listman.redhat.com/mailman/listinfo/linux-lvm
read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/
Quoted 5 lines
_______________________________________________
linux-lvm mailing list
[email protected]
https://listman.redhat.com/mailman/listinfo/linux-lvm
read the LVM HOW-TO athttp://tldp.org/HOWTO/LVM-HOWTO/
_______________________________________________
linux-lvm mailing list
[email protected]
https://listman.redhat.com/mailman/listinfo/linux-lvm
read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/