U-Boot Digest, Vol 9, Issue 275
A message that is not in the archive (sent off-list or not yet received): [email protected]
Quoted 7 lines
i'm using u-boot -1.3.0 in MPC8313 evaluation board, it having a NAND , NOR Flash , u-boot stored in NOR flash. when i do the saveenv , reset command the u-boot is erased. i'm not able to fix this issue. help me to fix this issue
On my board this was due to CONFIG_SYS_MONITOR_LEN not being big enough.
Peter
Dear Peter Griffin,
Quoted 8 lines · In message <1235312940.26727.2.camel@quercus-bis> you wrote:
Quoted 7 lines
i'm using u-boot -1.3.0 in MPC8313 evaluation board, it having a NAND , NOR Flash , u-boot stored in NOR flash. when i do the saveenv , reset command the u-boot is erased. i'm not able to fix this issue. help me to fix this issue
On my board this was due to
CONFIG_SYS_MONITOR_LENnot being big enough.
when replying, please:
* Keep the original poster's subject
* Make sure to includ etheread information
In general, you probably want to read
http://www.netmeister.org/news/learn2quote.html
Best regards,
Wolfgang Denk
Signature · 4 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de Copy from one, it's plagiarism; copy from two, it's research.