Skip to contentSkip to conversation

How to priorize incoming traffic

LARTC Stef Coene 2 participants 2 messages Mar 13, 2002

lore
Share & tools
lore

Stef Coene

author
#0 lore raw
Quoted 24 lines · you

Hello,

I think of how to priorize incoming traffic.

Therefor I read different web pages and found two different meanings.

On http://www.docum.org/stef.coene/qos/docs/BB/BB.html:

You can do traffic shaping with the Linux kernel. It's very important that you understand that you can only shape the outgoing bandwidth.

On http://www.docum.org/stef.coene/qos/docs/mail_2.html:

# suppose you want to limit incoming web traffic (you are the client not
the server so the _source_ port is 80) mark the packets with 1 in netfilter
# the handle seems to require to have value ffff (why ???)
/sbin/iptables -A PREROUTING -i eth0 -t mangle -p tcp --sport 80 -j MARK
--set-mark 1
# then add the queuing discipline
tc qdisc add dev eth0 handle FFFF: ingress
# limit bw to 64kbit. I'm not really sure of the burst and mtu values...
tc filter add dev eth0 parent ffff: protocol ip prio 50 handle 1 fw
police rate 64kbit burst 2400 mtu 9k drop flowid :1
Quoted 2 lines

Well, does anybody know whether it is possible to limit/manage incoming traffic in this way mentioned above or not?

Euh, this IS limiting incoming bandwidth :)
So I lied in the document on docum.org, I know. You can limit incoming bandwith with the ingress qdisc, but you can not use CBQ or HTB so you can't use classes.
Also take a look at the wondershaper in the lartc howto.

Stef

Signature · 7 lines
[email protected]
 "Using Linux as bandwidth manager"
     http://www.docum.org/
     #lartc @ irc.openprojects.net
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
#1 lore raw

Hello,

I think of how to priorize incoming traffic.

Therefor I read different web pages and found two different meanings.

On http://www.docum.org/stef.coene/qos/docs/BB/BB.html:

You can do traffic shaping with the Linux kernel. It's very important that you understand that you can only shape the outgoing bandwidth.

On http://www.docum.org/stef.coene/qos/docs/mail_2.html:

# suppose you want to limit incoming web traffic (you are the client not 
the server so the _source_ port is 80) mark the packets with 1 in netfilter
# the handle seems to require to have value ffff (why ???)
/sbin/iptables -A PREROUTING -i eth0 -t mangle -p tcp --sport 80 -j MARK 
--set-mark 1
# then add the queuing discipline
tc qdisc add dev eth0 handle FFFF: ingress
# limit bw to 64kbit. I'm not really sure of the burst and mtu values...
tc filter add dev eth0 parent ffff: protocol ip prio 50 handle 1 fw 
police rate 64kbit burst 2400 mtu 9k drop flowid :1

Well, does anybody know whether it is possible to limit/manage incoming traffic in this way mentioned above or not?

Thanks,
Georg

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/