How to priorize incoming traffic
Quoted 24 lines · you
Hello,
I think of how to priorize incoming traffic.
Therefor I read different web pages and found two different meanings.
On http://www.docum.org/stef.coene/qos/docs/BB/BB.html:
You can do traffic shaping with the Linux kernel. It's very important that you understand that you can only shape the outgoing bandwidth.
On http://www.docum.org/stef.coene/qos/docs/mail_2.html:
# suppose you want to limit incoming web traffic (you are the client not the server so the _source_ port is 80) mark the packets with 1 in netfilter # the handle seems to require to have value ffff (why ???) /sbin/iptables -A PREROUTING -i eth0 -t mangle -p tcp --sport 80 -j MARK --set-mark 1 # then add the queuing discipline tc qdisc add dev eth0 handle FFFF: ingress # limit bw to 64kbit. I'm not really sure of the burst and mtu values... tc filter add dev eth0 parent ffff: protocol ip prio 50 handle 1 fw police rate 64kbit burst 2400 mtu 9k drop flowid :1
Quoted 2 lines
Well, does anybody know whether it is possible to limit/manage incoming traffic in this way mentioned above or not?
Euh, this IS limiting incoming bandwidth :)
So I lied in the document on docum.org, I know. You can limit incoming bandwith with the ingress qdisc, but you can not use CBQ or HTB so you can't use classes.
Also take a look at the wondershaper in the lartc howto.
Stef
Signature · 7 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.openprojects.net _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Hello,
I think of how to priorize incoming traffic.
Therefor I read different web pages and found two different meanings.
On http://www.docum.org/stef.coene/qos/docs/BB/BB.html:
You can do traffic shaping with the Linux kernel. It's very important that you understand that you can only shape the outgoing bandwidth.
On http://www.docum.org/stef.coene/qos/docs/mail_2.html:
# suppose you want to limit incoming web traffic (you are the client not the server so the _source_ port is 80) mark the packets with 1 in netfilter # the handle seems to require to have value ffff (why ???) /sbin/iptables -A PREROUTING -i eth0 -t mangle -p tcp --sport 80 -j MARK --set-mark 1 # then add the queuing discipline tc qdisc add dev eth0 handle FFFF: ingress # limit bw to 64kbit. I'm not really sure of the burst and mtu values... tc filter add dev eth0 parent ffff: protocol ip prio 50 handle 1 fw police rate 64kbit burst 2400 mtu 9k drop flowid :1
Well, does anybody know whether it is possible to limit/manage incoming traffic in this way mentioned above or not?
Thanks,
Georg
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/