Skip to contentSkip to conversation

New IMQ device available

LARTC Patrick McHardy 3 participants 4 messages Apr 4, 2002

lore
Share & tools
lore
#0 lore raw

Hi!

I've completed a pre-release of the new IMQ device.
Changes include:
- Multiple IMQ devices
- Selection of what gets queued to which device is done using an iptables target, nothing gets queued be default
- Ingress support (egress qdiscs can be used for ingress traffic control!)
- Possible to build as a module

Sources and somewhat confuse instructions can be found at http://luxik.cdi.cz/~patrick/imq .

Bye,
Patrick

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#1 lore raw

good work ;) Please change Devara=>Devera .. I also changed original page http://luxik.cdi.cz/~devik/qos/imq.htm
to mention your new one at beginning.

Also why there are four imqs ? I can't find way how to direct packet to partiticular one ....
devik

Quoted 10 lines · Patrick McHardy

Hi!

I've completed a pre-release of the new IMQ device.
Changes include:
- Multiple IMQ devices
- Selection of what gets queued to which device is done using an iptables target, nothing gets queued be default
- Ingress support (egress qdiscs can be used for ingress traffic control!)
- Possible to build as a module

Quoted 10 lines

Sources and somewhat confuse instructions can be found at http://luxik.cdi.cz/~patrick/imq .

Bye,
Patrick

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#2 lore raw
In reply to Patrick McHardy

Oops, forgot to reply to the list.

Quoted 2 lines · Martin Devera

Also why there are four imqs ? I can't find way how to direct packet to partiticular one ....

The IMQ iptables target has an option --todev to specify to which imq device a packet should go. if it's not specified it defaults to 0.

Bye Patrick

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/