New IMQ device available
Hi!
I've completed a pre-release of the new IMQ device.
Changes include:
- Multiple IMQ devices
- Selection of what gets queued to which device is done using an iptables target, nothing gets queued be default
- Ingress support (egress qdiscs can be used for ingress traffic control!)
- Possible to build as a module
Sources and somewhat confuse instructions can be found at http://luxik.cdi.cz/~patrick/imq .
Bye,
Patrick
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
good work ;) Please change Devara=>Devera .. I also changed original page http://luxik.cdi.cz/~devik/qos/imq.htm
to mention your new one at beginning.
Also why there are four imqs ? I can't find way how to direct packet to partiticular one ....
devik
Quoted 10 lines · Patrick McHardy
Hi!
I've completed a pre-release of the new IMQ device.
Changes include:
- Multiple IMQ devices
- Selection of what gets queued to which device is done using an iptables target, nothing gets queued be default
- Ingress support (egress qdiscs can be used for ingress traffic control!)
- Possible to build as a module
Quoted 10 lines
Sources and somewhat confuse instructions can be found at http://luxik.cdi.cz/~patrick/imq .
Bye,
Patrick_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Oops, forgot to reply to the list.
Quoted 2 lines · Martin Devera
Also why there are four imqs ? I can't find way how to direct packet to partiticular one ....
The IMQ iptables target has an option --todev to specify to which imq device a packet should go. if it's not specified it defaults to 0.
Bye Patrick
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 2 lines
- Ingress support (egress qdiscs can be used for ingress traffic control!)
Ehhhhhh, I can't believe it !!
Yahgooooooooo
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/