Skip to contentSkip to conversation

HTB: child rate > parent rate

LARTC Andreas Lehrbaum 2 participants 2 messages Apr 30, 2002

lore
Share & tools
lore
#0 lore raw

In his htb manual Devik writes:

"... The rate supplied for a parent should be the sum of the rates of its children. (We may later describe how it can be useful to violate this rule.)"

As far as I can tell this is not described anywhere.

Does it have any negative consequences to have child classes with higher rate/ceil than their parent when I'm using "inject 0"?

Thanks in advance!

~Andreas
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#1 lore raw

I case of injecting the rate can be higher. However if I ever finish new/faster version, injecting will not be supported as it is very hard to implement (unfortunately).

Quoted 10 lines · Andreas Lehrbaum

In his htb manual Devik writes:

"... The rate supplied for a parent should be the sum of the rates of its children. (We may later describe how it can be useful to violate this rule.)"

As far as I can tell this is not described anywhere.

Does it have any negative consequences to have child classes with higher rate/ceil than their parent when I'm using "inject 0"?

Quoted 8 lines

Thanks in advance!

~Andreas
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/