Skip to contentSkip to conversation

TC Filter specifing multiple ports

LARTC Steven Schmidt 2 participants 2 messages May 29, 2002 – May 30, 2002

lore
Share & tools
lore
#1 lore raw

Use -j MARK in iptables and futher use this mark in tc filter

Quoted 11 lines · Steven Schmidt

Hi All,

Anybody know if a range of ports can be specified within a tc filter statement

i.e.
tc filter add dev eth 0 parent 10:1 protocol ip prio 10 u32 match ip dport ???? flowid 10:100

Works fine with a single port but can't find any spec for multiple ports.

Quoted 8 lines

Cheers
Steve.

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

-----------------------------------
mailto:[email protected]
BR
Alexey Talikov
FORTEK
-----------------------------------

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/