TC Filter specifing multiple ports
Hi All,
Anybody know if a range of ports can be specified within a tc filter statement
i.e.
tc filter add dev eth 0 parent 10:1 protocol ip prio 10 u32 match ip dport ???? flowid 10:100
Works fine with a single port but can't find any spec for multiple ports.
Cheers
Steve.
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Use -j MARK in iptables and futher use this mark in tc filter
Quoted 11 lines · Steven Schmidt
Hi All,
Anybody know if a range of ports can be specified within a tc filter statement
i.e.
tc filter add dev eth 0 parent 10:1 protocol ip prio 10 u32 match ip dport ???? flowid 10:100Works fine with a single port but can't find any spec for multiple ports.
Quoted 8 lines
Cheers
Steve._______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
-----------------------------------
mailto:[email protected]
BR
Alexey Talikov
FORTEK
-----------------------------------
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/