Hammer protection
Hi,
Is it possible to use iptables as hammeprotection ?
I want to deny a user who has just logged off .. for about 10seconds.
I tried with this, but that didn't work. Maybe my mind is going completely in the wrong direction today? =)
iptables -I INPUT -i eth0 -p tcp -s 0/0 -d $my_ip --dport 21 -m limit --limit 10/second --limit-burst 1 --tcp-flags ALL SYN -j ACCEPT
Greetings,
Joachim
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 6 lines
Hi,
Is it possible to use iptables as hammeprotection ?
I want to deny a user who has just logged off .. for about 10seconds.
i think this is a application-logic-thing which can't be implemented that easy only by one iptables-line
Quoted 6 lines
I tried with this, but that didn't work. Maybe my mind is going completely in the wrong direction today? =)
iptables -I INPUT -i eth0 -p tcp -s 0/0 -d $my_ip --dport 21 -m limit --limit 10/second --limit-burst 1 --tcp-flags ALL SYN -j ACCEPT
this rule blocks (afaik) every request after the 10th/second, no matter s.o logged off or on ...
i think what u want must be done on application-level
or with an "magic) (and dirty) script which watches the ftp-log if s.o loggs off, grep's it's ip and then blocks it for 10 seconds but that not only sounds ugly :)
Quoted 9 lines
Greetings,
Joachim
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
hi Joachim,
Quoted 2 lines
I want to deny a user who has just logged off .. for about 10seconds.
I think you can only limit the number of syn-pakets like you already proposed.
Quoted 6 lines
I tried with this, but that didn't work. Maybe my mind is going completely in the wrong direction today? =)
iptables -I INPUT -i eth0 -p tcp -s 0/0 -d $my_ip --dport 21 -m limit --limit 10/second --limit-burst 1 --tcp-flags ALL SYN -j ACCEPT
I'm not sure, but I think you just mixed the parameters up. --limit 10/second allows 10 SYN pakets per second so if you only want one paket per 10 seconds you should perhaps try 6/minute or maybe say 1/minute and set the limit-bust to 3 or so.
best regards
Sebastian
Signature · 9 lines
Sebastian 'spax' Pape | I'm like time ... u can't stop me! mailto: [email protected] | gpg: http://p-a-p-e.de/gpg.asc | --- Do you want to know more? http://www.p-a-p-e.de/ --- _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Hi
Quoted 2 lines
I think you can only limit the number of syn-pakets like you already proposed.
I tried to switch the params as you said, but no success. It took maybe a minute before I did get in to the site, but after that I could logout and in as fast as I wanted. (hammering)
Mabye the only way is the dirty scriptin to fetch the IP from the log then :/
// Joachim
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/