Skip to contentSkip to conversation

Hammer protection

LARTC Joachim Wickman 3 participants 4 messages Jul 1, 2002

lore
Share & tools
lore
#0 lore raw

Hi,

Is it possible to use iptables as hammeprotection ?

I want to deny a user who has just logged off .. for about 10seconds.

I tried with this, but that didn't work. Maybe my mind is going completely in the wrong direction today? =)

iptables -I INPUT -i eth0 -p tcp -s 0/0 -d $my_ip --dport 21 -m limit --limit 10/second --limit-burst 1 --tcp-flags ALL SYN -j ACCEPT

Greetings,

Joachim

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#1 lore raw
Quoted 6 lines

Hi,

Is it possible to use iptables as hammeprotection ?

I want to deny a user who has just logged off .. for about 10seconds.

i think this is a application-logic-thing which can't be implemented that easy only by one iptables-line

Quoted 6 lines

I tried with this, but that didn't work. Maybe my mind is going completely in the wrong direction today? =)

iptables -I INPUT -i eth0 -p tcp -s 0/0 -d $my_ip --dport 21 -m limit --limit 10/second --limit-burst 1 --tcp-flags ALL SYN -j ACCEPT

this rule blocks (afaik) every request after the 10th/second, no matter s.o logged off or on ...
i think what u want must be done on application-level
or with an "magic) (and dirty) script which watches the ftp-log if s.o loggs off, grep's it's ip and then blocks it for 10 seconds but that not only sounds ugly :)

Quoted 9 lines

Greetings,

Joachim

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#2 lore raw
In reply to Joachim Wickman

hi Joachim,

Quoted 2 lines

I want to deny a user who has just logged off .. for about 10seconds.

I think you can only limit the number of syn-pakets like you already proposed.

Quoted 6 lines

I tried with this, but that didn't work. Maybe my mind is going completely in the wrong direction today? =)

iptables -I INPUT -i eth0 -p tcp -s 0/0 -d $my_ip --dport 21 -m limit --limit 10/second --limit-burst 1 --tcp-flags ALL SYN -j ACCEPT

I'm not sure, but I think you just mixed the parameters up. --limit 10/second allows 10 SYN pakets per second so if you only want one paket per 10 seconds you should perhaps try 6/minute or maybe say 1/minute and set the limit-bust to 3 or so.

best regards
Sebastian

Signature · 9 lines
Sebastian 'spax' Pape          | I'm like time ... u can't stop me!  
mailto: [email protected]   | 
gpg: http://p-a-p-e.de/gpg.asc | 
         --- Do you want to know more? http://www.p-a-p-e.de/ ---


_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
#3 lore raw
In reply to Joachim Wickman

Hi

Quoted 2 lines

I think you can only limit the number of syn-pakets like you already proposed.

I tried to switch the params as you said, but no success. It took maybe a minute before I did get in to the site, but after that I could logout and in as fast as I wanted. (hammering)

Mabye the only way is the dirty scriptin to fetch the IP from the log then :/

// Joachim

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/