Skip to contentSkip to conversation

NAT & IMQ

LARTC Daniel Sercaianu 2 participants 4 messages Aug 10, 2002 – Aug 11, 2002

lore
Share & tools
lore
#0 lore raw

I have the following problems:
I cannot shape the ip xxx.xxx.xxx.xxx when I do SNAT or MASQUERADE with them. Otherwise when I remove these two iptables lines the shaping works perfectly.

It is very important for me to shape the xxx.xxx.xxx.xxx ip and not the yyy.yyy.yyy.yyy. When I tried to shape yyy.yyy.yyy.yyy, it worked.

What rules should be added to make this possible?

My iptables rules are:

iptables -A PREROUTING -t mangle -s xxx.xxx.xxx.xxx -j MARK --set-mark 1 iptables -A POSTROUTING -t nat -s xxx.xxx.xxx.xxx -j SNAT --to zzz.zzz.zzz.zzz -o eth4

iptables -t mangle -I PREROUTING -j IMQ
ip link set imq0 up

ip rule shows the following output:

32764:  from zzz.zzz.zzz.0/24 lookup ew
32765:  from all fwmark        1 lookup ew
32766:  from all lookup main
32767:  from all lookup default

My tc + htb rule look like this:

/sbin/tc qdisc add dev imq0 root handle 1: htb default 200 r2q 3
/sbin/tc class add dev imq0 parent 1:0 classid 1:1 htb rate 100Mbit ceil 100Mbit burst 2k prio 5

/sbin/tc filter add dev imq0 parent 1:0 protocol ip prio 5 handle 1: u32 divisor 256

/sbin/tc class add dev imq0 parent 1:1 classid 1:2 htb rate 512kbit ceil 512kbit burst 2k prio 5 /sbin/tc qdisc add dev imq0 parent 1:2 handle 10: sfq quantum 1514b perturb 10 /sbin/tc filter add dev imq0 parent 1:0 protocol ip prio 5 u32 match ip dst xxx.xxx.xxx.xxx flowid 1:2

/sbin/tc filter add dev imq0 parent 1:0 prio 5 handle ::1 u32 ht 800:: \
match ip nofrag \
offset mask 0x0F00 shift 6 \
hashkey mask 0x00ff0000 at 8 link 1:

Daniel Sercaianu
Terranet Virtual Media
[email protected]
GSM +40 788 837723

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#1 lore raw

Hi Daniel,

Quoted 34 lines · Daniel Sercaianu

I have the following problems:
I cannot shape the ip xxx.xxx.xxx.xxx when I do SNAT or MASQUERADE with them. Otherwise when I remove these two iptables lines the shaping works perfectly.

It is very important for me to shape the xxx.xxx.xxx.xxx ip and not the yyy.yyy.yyy.yyy. When I tried to shape yyy.yyy.yyy.yyy, it worked.

What rules should be added to make this possible?

My iptables rules are:

iptables -A PREROUTING -t mangle -s xxx.xxx.xxx.xxx -j MARK --set-mark 1 iptables -A POSTROUTING -t nat -s xxx.xxx.xxx.xxx -j SNAT --to zzz.zzz.zzz.zzz -o eth4

iptables -t mangle -I PREROUTING -j IMQ
ip link set imq0 up

ip rule shows the following output:

32764:  from zzz.zzz.zzz.0/24 lookup ew
32765:  from all fwmark        1 lookup ew
32766:  from all lookup main
32767:  from all lookup default

My tc + htb rule look like this:

Quoted 8 lines

/sbin/tc qdisc add dev imq0 root handle 1: htb default 200 r2q 3
/sbin/tc class add dev imq0 parent 1:0 classid 1:1 htb rate 100Mbit ceil 100Mbit burst 2k prio 5

/sbin/tc filter add dev imq0 parent 1:0 protocol ip prio 5 handle 1: u32 divisor 256

/sbin/tc class add dev imq0 parent 1:1 classid 1:2 htb rate 512kbit ceil 512kbit burst 2k prio 5 /sbin/tc qdisc add dev imq0 parent 1:2 handle 10: sfq quantum 1514b perturb 10 /sbin/tc filter add dev imq0 parent 1:0 protocol ip prio 5 u32 match ip dst xxx.xxx.xxx.xxx flowid 1:2

If i understood you right this is probably not working because imq sees packets before zzz.zzz.zzz.zzz is dnated back to xxx.xxx.xxx.xxx. please try the attached patch.

bye

patrick

imq.c renamed from imq.c.orig +2 -2
@@ -37,7 +37,7 @@
 	imq_nf_hook,
 	PF_INET,
 	NF_IP_PRE_ROUTING,
-	NF_IP_PRI_MANGLE + 1
+	NF_IP_PRI_NAT_DST + 1
 };
 
 static struct nf_hook_ops imq_egress_ipv4 = {
@@ -54,7 +54,7 @@
 	imq_nf_hook,
 	PF_INET6,
 	NF_IP6_PRE_ROUTING,
-	NF_IP6_PRI_MANGLE + 1
+	NF_IP6_PRI_NAT_SRC + 1
 };
 
 static struct nf_hook_ops imq_egress_ipv6 = {
#2 lore raw
In reply to Daniel Sercaianu

sorry last patch was broken, this one is ok.
patrick

Quoted 72 lines · Patrick McHardy

Hi Daniel,

Quoted 34 lines · Daniel Sercaianu

I have the following problems:
I cannot shape the ip xxx.xxx.xxx.xxx when I do SNAT or MASQUERADE with them. Otherwise when I remove these two iptables lines the shaping works perfectly.

It is very important for me to shape the xxx.xxx.xxx.xxx ip and not the yyy.yyy.yyy.yyy. When I tried to shape yyy.yyy.yyy.yyy, it worked.

What rules should be added to make this possible?

My iptables rules are:

iptables -A PREROUTING -t mangle -s xxx.xxx.xxx.xxx -j MARK --set-mark 1 iptables -A POSTROUTING -t nat -s xxx.xxx.xxx.xxx -j SNAT --to zzz.zzz.zzz.zzz -o eth4

iptables -t mangle -I PREROUTING -j IMQ
ip link set imq0 up

ip rule shows the following output:

32764:  from zzz.zzz.zzz.0/24 lookup ew
32765:  from all fwmark        1 lookup ew
32766:  from all lookup main
32767:  from all lookup default

My tc + htb rule look like this:

Quoted 8 lines

/sbin/tc qdisc add dev imq0 root handle 1: htb default 200 r2q 3
/sbin/tc class add dev imq0 parent 1:0 classid 1:1 htb rate 100Mbit ceil 100Mbit burst 2k prio 5

/sbin/tc filter add dev imq0 parent 1:0 protocol ip prio 5 handle 1: u32 divisor 256

/sbin/tc class add dev imq0 parent 1:1 classid 1:2 htb rate 512kbit ceil 512kbit burst 2k prio 5 /sbin/tc qdisc add dev imq0 parent 1:2 handle 10: sfq quantum 1514b perturb 10 /sbin/tc filter add dev imq0 parent 1:0 protocol ip prio 5 u32 match ip dst xxx.xxx.xxx.xxx flowid 1:2

If i understood you right this is probably not working because imq sees packets before zzz.zzz.zzz.zzz is dnated back to xxx.xxx.xxx.xxx. please try the attached patch.

bye

patrick

------------------------------------------------------------------------

imq.c renamed from imq.c.orig +1 -1
@@ -37,7 +37,7 @@
 	imq_nf_hook,
 	PF_INET,
 	NF_IP_PRE_ROUTING,
-	NF_IP_PRI_MANGLE + 1
+	NF_IP_PRI_NAT_DST + 1
 };
 
 static struct nf_hook_ops imq_egress_ipv4 = {

imq.c line 60

Quoted 8 lines
imq.c renamed from imq.c.orig +1 -1
@@ -54,7 +54,7 @@
 	imq_nf_hook,
 	PF_INET6,
 	NF_IP6_PRE_ROUTING,
-	NF_IP6_PRI_MANGLE + 1
+	NF_IP6_PRI_NAT_SRC + 1
 };
 
 static struct nf_hook_ops imq_egress_ipv6 = {
imq.c renamed from imq.c.orig +2 -2
@@ -37,7 +37,7 @@
 	imq_nf_hook,
 	PF_INET,
 	NF_IP_PRE_ROUTING,
-	NF_IP_PRI_MANGLE + 1
+	NF_IP_PRI_NAT_DST + 1
 };
 
 static struct nf_hook_ops imq_egress_ipv4 = {
@@ -54,7 +54,7 @@
 	imq_nf_hook,
 	PF_INET6,
 	NF_IP6_PRE_ROUTING,
-	NF_IP6_PRI_MANGLE + 1
+	NF_IP6_PRI_NAT_DST + 1
 };
 
 static struct nf_hook_ops imq_egress_ipv6 = {
#3 lore raw
In reply to Daniel Sercaianu

Yes, I think you are wright.
I will it try as soon I get the chance, because these are on a
working server (router) which cannot be rebooted. Temporarilly I solved the problem by applying the download shapers to the wright eth.

Thanx,

Daniel Sercaianu
Terranet Virtual Media
[email protected]
GSM +40 788 837723

Quoted 91 lines · Patrick McHardy

sorry last patch was broken, this one is ok.
patrick

Quoted 86 lines · Patrick McHardy

Hi Daniel,

Quoted 42 lines · Daniel Sercaianu

I have the following problems:
I cannot shape the ip xxx.xxx.xxx.xxx when I do SNAT or MASQUERADE with them. Otherwise when I remove these two iptables lines the shaping works perfectly.

It is very important for me to shape the xxx.xxx.xxx.xxx ip and not the yyy.yyy.yyy.yyy. When I tried to shape yyy.yyy.yyy.yyy, it worked.

What rules should be added to make this possible?

My iptables rules are:

iptables -A PREROUTING -t mangle -s xxx.xxx.xxx.xxx -j MARK --set-mark 1 iptables -A POSTROUTING -t nat -s xxx.xxx.xxx.xxx -j SNAT --to zzz.zzz.zzz.zzz -o eth4

iptables -t mangle -I PREROUTING -j IMQ
ip link set imq0 up

ip rule shows the following output:

32764:  from zzz.zzz.zzz.0/24 lookup ew
32765:  from all fwmark        1 lookup ew
32766:  from all lookup main
32767:  from all lookup default

My tc + htb rule look like this:

/sbin/tc qdisc add dev imq0 root handle 1: htb default 200 r2q 3 /sbin/tc class add dev imq0 parent 1:0 classid 1:1 htb rate 100Mbit ceil 100Mbit burst 2k prio 5

/sbin/tc filter add dev imq0 parent 1:0 protocol ip prio 5 handle 1:
u32 divisor 256

Quoted 6 lines

/sbin/tc class add dev imq0 parent 1:1 classid 1:2 htb rate 512kbit ceil 512kbit burst 2k prio 5
/sbin/tc qdisc add dev imq0 parent 1:2 handle 10: sfq quantum 1514b perturb 10
/sbin/tc filter add dev imq0 parent 1:0 protocol ip prio 5 u32 match ip dst xxx.xxx.xxx.xxx flowid 1:2

If i understood you right this is probably not working because imq sees packets before zzz.zzz.zzz.zzz is dnated back to xxx.xxx.xxx.xxx. please try the attached patch.

bye

patrick

------------------------------------------------------------------------

imq.c renamed from imq.c.orig +2 -2
@@ -37,7 +37,7 @@
 	imq_nf_hook,
 	PF_INET,
 	NF_IP_PRE_ROUTING,
-	NF_IP_PRI_MANGLE + 1
+	NF_IP_PRI_NAT_DST + 1
 };
 
 static struct nf_hook_ops imq_egress_ipv4 = {
@@ -54,7 +54,7 @@
 	imq_nf_hook,
 	PF_INET6,
 	NF_IP6_PRE_ROUTING,
-	NF_IP6_PRI_MANGLE + 1
+	NF_IP6_PRI_NAT_SRC + 1
 };
 
Quoted 4 lines

imq.c line 60

Quoted 2 lines
imq.c renamed from imq.c.orig +0 -0
 static struct nf_hook_ops imq_egress_ipv6 = {

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/