NAT & IMQ
I have the following problems:
I cannot shape the ip xxx.xxx.xxx.xxx when I do SNAT or MASQUERADE with them. Otherwise when I remove these two iptables lines the shaping works perfectly.
It is very important for me to shape the xxx.xxx.xxx.xxx ip and not the yyy.yyy.yyy.yyy. When I tried to shape yyy.yyy.yyy.yyy, it worked.
What rules should be added to make this possible?
My iptables rules are:
iptables -A PREROUTING -t mangle -s xxx.xxx.xxx.xxx -j MARK --set-mark 1 iptables -A POSTROUTING -t nat -s xxx.xxx.xxx.xxx -j SNAT --to zzz.zzz.zzz.zzz -o eth4
iptables -t mangle -I PREROUTING -j IMQ
ip link set imq0 up
ip rule shows the following output:
32764: from zzz.zzz.zzz.0/24 lookup ew 32765: from all fwmark 1 lookup ew 32766: from all lookup main 32767: from all lookup default
My tc + htb rule look like this:
/sbin/tc qdisc add dev imq0 root handle 1: htb default 200 r2q 3/sbin/tc class add dev imq0 parent 1:0 classid 1:1 htb rate 100Mbit ceil 100Mbit burst 2k prio 5
/sbin/tc filter add dev imq0 parent 1:0 protocol ip prio 5 handle 1: u32 divisor 256
/sbin/tc class add dev imq0 parent 1:1 classid 1:2 htb rate 512kbit ceil 512kbit burst 2k prio 5 /sbin/tc qdisc add dev imq0 parent 1:2 handle 10: sfq quantum 1514b perturb 10 /sbin/tc filter add dev imq0 parent 1:0 protocol ip prio 5 u32 match ip dst xxx.xxx.xxx.xxx flowid 1:2
/sbin/tc filter add dev imq0 parent 1:0 prio 5 handle ::1 u32 ht 800:: \
match ip nofrag \
offset mask 0x0F00 shift 6 \
hashkey mask 0x00ff0000 at 8 link 1:
Daniel Sercaianu
Terranet Virtual Media
[email protected]
GSM +40 788 837723
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Hi Daniel,
Quoted 34 lines · Daniel Sercaianu
I have the following problems:
I cannot shape the ip xxx.xxx.xxx.xxx when I do SNAT or MASQUERADE with them. Otherwise when I remove these two iptables lines the shaping works perfectly.It is very important for me to shape the xxx.xxx.xxx.xxx ip and not the yyy.yyy.yyy.yyy. When I tried to shape yyy.yyy.yyy.yyy, it worked.
What rules should be added to make this possible?
My iptables rules are:
iptables -A PREROUTING -t mangle -s xxx.xxx.xxx.xxx -j MARK --set-mark 1 iptables -A POSTROUTING -t nat -s xxx.xxx.xxx.xxx -j SNAT --to zzz.zzz.zzz.zzz -o eth4
iptables -t mangle -I PREROUTING -j IMQ
ip link set imq0 upip rule shows the following output:
32764: from zzz.zzz.zzz.0/24 lookup ew 32765: from all fwmark 1 lookup ew 32766: from all lookup main 32767: from all lookup defaultMy tc + htb rule look like this:
Quoted 8 lines
/sbin/tcqdisc add dev imq0 root handle 1: htb default 200 r2q 3/sbin/tcclass add dev imq0 parent 1:0 classid 1:1 htb rate 100Mbit ceil 100Mbit burst 2k prio 5
/sbin/tcfilter add dev imq0 parent 1:0 protocol ip prio 5 handle 1: u32 divisor 256
/sbin/tcclass add dev imq0 parent 1:1 classid 1:2 htb rate 512kbit ceil 512kbit burst 2k prio 5/sbin/tcqdisc add dev imq0 parent 1:2 handle 10: sfq quantum 1514b perturb 10/sbin/tcfilter add dev imq0 parent 1:0 protocol ip prio 5 u32 match ip dst xxx.xxx.xxx.xxx flowid 1:2
If i understood you right this is probably not working because imq sees packets before zzz.zzz.zzz.zzz is dnated back to xxx.xxx.xxx.xxx. please try the attached patch.
bye
patrick
imq.c renamed from imq.c.orig +2 -2
@@ -37,7 +37,7 @@ imq_nf_hook,PF_INET ,NF_IP_PRE_ROUTING , -NF_IP_PRI_MANGLE +1 +NF_IP_PRI_NAT_DST +1 }; static struct nf_hook_ops imq_egress_ipv4 = {
@@ -54,7 +54,7 @@ imq_nf_hook,PF_INET6 ,NF_IP6_PRE_ROUTING , -NF_IP6_PRI_MANGLE +1 +NF_IP6_PRI_NAT_SRC +1 }; static struct nf_hook_ops imq_egress_ipv6 = {
sorry last patch was broken, this one is ok.
patrick
Quoted 72 lines · Patrick McHardy
Hi Daniel,
Quoted 34 lines · Daniel Sercaianu
I have the following problems:
I cannot shape the ip xxx.xxx.xxx.xxx when I do SNAT or MASQUERADE with them. Otherwise when I remove these two iptables lines the shaping works perfectly.It is very important for me to shape the xxx.xxx.xxx.xxx ip and not the yyy.yyy.yyy.yyy. When I tried to shape yyy.yyy.yyy.yyy, it worked.
What rules should be added to make this possible?
My iptables rules are:
iptables -A PREROUTING -t mangle -s xxx.xxx.xxx.xxx -j MARK --set-mark 1 iptables -A POSTROUTING -t nat -s xxx.xxx.xxx.xxx -j SNAT --to zzz.zzz.zzz.zzz -o eth4
iptables -t mangle -I PREROUTING -j IMQ
ip link set imq0 upip rule shows the following output:
32764: from zzz.zzz.zzz.0/24 lookup ew 32765: from all fwmark 1 lookup ew 32766: from all lookup main 32767: from all lookup defaultMy tc + htb rule look like this:
Quoted 8 lines
/sbin/tcqdisc add dev imq0 root handle 1: htb default 200 r2q 3/sbin/tcclass add dev imq0 parent 1:0 classid 1:1 htb rate 100Mbit ceil 100Mbit burst 2k prio 5
/sbin/tcfilter add dev imq0 parent 1:0 protocol ip prio 5 handle 1: u32 divisor 256
/sbin/tcclass add dev imq0 parent 1:1 classid 1:2 htb rate 512kbit ceil 512kbit burst 2k prio 5/sbin/tcqdisc add dev imq0 parent 1:2 handle 10: sfq quantum 1514b perturb 10/sbin/tcfilter add dev imq0 parent 1:0 protocol ip prio 5 u32 match ip dst xxx.xxx.xxx.xxx flowid 1:2If i understood you right this is probably not working because imq sees packets before zzz.zzz.zzz.zzz is dnated back to xxx.xxx.xxx.xxx. please try the attached patch.
bye
patrick
------------------------------------------------------------------------
imq.c renamed from imq.c.orig +1
-1@@ -37,7 +37,7 @@ imq_nf_hook,PF_INET ,NF_IP_PRE_ROUTING , -NF_IP_PRI_MANGLE +1 +NF_IP_PRI_NAT_DST +1 }; static struct nf_hook_ops imq_egress_ipv4 = {
imq.c line 60
Quoted 8 lines
imq.c renamed from imq.c.orig +1
-1@@ -54,7 +54,7 @@ imq_nf_hook,PF_INET6 ,NF_IP6_PRE_ROUTING , -NF_IP6_PRI_MANGLE +1 +NF_IP6_PRI_NAT_SRC +1 }; static struct nf_hook_ops imq_egress_ipv6 = {
imq.c renamed from imq.c.orig +2 -2
@@ -37,7 +37,7 @@ imq_nf_hook,PF_INET ,NF_IP_PRE_ROUTING , -NF_IP_PRI_MANGLE +1 +NF_IP_PRI_NAT_DST +1 }; static struct nf_hook_ops imq_egress_ipv4 = {
@@ -54,7 +54,7 @@ imq_nf_hook,PF_INET6 ,NF_IP6_PRE_ROUTING , -NF_IP6_PRI_MANGLE +1 +NF_IP6_PRI_NAT_DST +1 }; static struct nf_hook_ops imq_egress_ipv6 = {
Yes, I think you are wright.
I will it try as soon I get the chance, because these are on a
working server (router) which cannot be rebooted. Temporarilly I solved the problem by applying the download shapers to the wright eth.
Thanx,
Daniel Sercaianu
Terranet Virtual Media
[email protected]
GSM +40 788 837723
Quoted 91 lines · Patrick McHardy
sorry last patch was broken, this one is ok.
patrickQuoted 86 lines · Patrick McHardy
Hi Daniel,
Quoted 42 lines · Daniel Sercaianu
I have the following problems:
I cannot shape the ip xxx.xxx.xxx.xxx when I do SNAT or MASQUERADE with them. Otherwise when I remove these two iptables lines the shaping works perfectly.It is very important for me to shape the xxx.xxx.xxx.xxx ip and not the yyy.yyy.yyy.yyy. When I tried to shape yyy.yyy.yyy.yyy, it worked.
What rules should be added to make this possible?
My iptables rules are:
iptables -A PREROUTING -t mangle -s xxx.xxx.xxx.xxx -j MARK --set-mark 1 iptables -A POSTROUTING -t nat -s xxx.xxx.xxx.xxx -j SNAT --to zzz.zzz.zzz.zzz -o eth4
iptables -t mangle -I PREROUTING -j IMQ
ip link set imq0 upip rule shows the following output:
32764: from zzz.zzz.zzz.0/24 lookup ew 32765: from all fwmark 1 lookup ew 32766: from all lookup main 32767: from all lookup defaultMy tc + htb rule look like this:
/sbin/tcqdisc add dev imq0 root handle 1: htb default 200 r2q 3/sbin/tcclass add dev imq0 parent 1:0 classid 1:1 htb rate 100Mbit ceil 100Mbit burst 2k prio 5
/sbin/tcfilter add dev imq0 parent 1:0 protocol ip prio 5 handle 1:
u32 divisor 256Quoted 6 lines
/sbin/tcclass add dev imq0 parent 1:1 classid 1:2 htb rate 512kbit ceil 512kbit burst 2k prio 5/sbin/tcqdisc add dev imq0 parent 1:2 handle 10: sfq quantum 1514b perturb 10/sbin/tcfilter add dev imq0 parent 1:0 protocol ip prio 5 u32 match ip dst xxx.xxx.xxx.xxx flowid 1:2If i understood you right this is probably not working because imq sees packets before zzz.zzz.zzz.zzz is dnated back to xxx.xxx.xxx.xxx. please try the attached patch.
bye
patrick
------------------------------------------------------------------------
imq.c renamed from imq.c.orig +2
-2@@ -37,7 +37,7 @@ imq_nf_hook,PF_INET ,NF_IP_PRE_ROUTING , -NF_IP_PRI_MANGLE +1 +NF_IP_PRI_NAT_DST +1 }; static struct nf_hook_ops imq_egress_ipv4 = {@@ -54,7 +54,7 @@ imq_nf_hook,PF_INET6 ,NF_IP6_PRE_ROUTING , - NF_IP6_PRI_MANGLE + 1 + NF_IP6_PRI_NAT_SRC + 1 };
Quoted 4 lines
imq.c line 60
Quoted 2 lines
imq.c renamed from imq.c.orig +0
-0static struct nf_hook_ops imq_egress_ipv6 = {
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/