Confusion about kernelconfig QoS-options
Hello there!
Using Kernel 2.4.19.
The modules I intend to use are SFQ queue, HTB packet scheduler, Firewall based classifier and the U32 classifier.
Witch of the following options _NEED_ to be enabled? I ask, because the goal is to have the kernel as small as possible.
< QOS and/or fair queueing >
[*] QoS support
[*] Rate estimator
[*] Traffic policing
Thank you!
Greetings, Nils
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 9 lines · Nils Lichtenfeld
Hello there!
Using Kernel 2.4.19.
The modules I intend to use are SFQ queue, HTB packet scheduler, Firewall based classifier and the U32 classifier.
Witch of the following options _NEED_ to be enabled? I ask, because the goal is to have the kernel as small as possible.
Then use modules and load only the modules you need.
Stef
Signature · 8 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.oftc.net _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Hi Stef!
Quoted 3 lines · Stef Coene
Quoted 2 lines
Witch of the following options _NEED_ to be enabled? I ask, because the goal is to have the kernel as small as possible.
Then use modules and load only the modules you need.
That was not my question. The listed items are not selectable as modules. They can only be compiled into the kernel or turned off. I list them again, they reside in the < QOS and/or fair queueing > section:
[*] QoS support
[*] Rate estimator
[*] Traffic policing
"*" is the default selection.
Thank you!
Greetings, Nils
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 6 lines · Nils Lichtenfeld
Hi Stef!
Quoted 3 lines · Stef Coene
Quoted 2 lines
Witch of the following options _NEED_ to be enabled? I ask, because the goal is to have the kernel as small as possible.
Quoted 7 lines
Quoted 1 line
Then use modules and load only the modules you need.
That was not my question. The listed items are not selectable as modules. They can only be compiled into the kernel or turned off. I list them again, they reside in the < QOS and/or fair queueing > section:
[*] QoS support
Only needed if you want to implement QOS support so other devices on the network can send requestst for bandwidth.
Quoted 1 line
[*] Rate estimator
This can be used for the "Traffic policing" to calculate the rate of the packets.
Quoted 1 line
[*] Traffic policing
This is sort of tbf-in-filter. You can configure a filter to only match packets at a certain rate.
You don't need these options to use SFQ, HTB, fw and/or u32.
Stef
Signature · 8 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.oftc.net _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Hello Stef!
Quoted 11 lines · Stef Coene
Quoted 6 lines · Nils Lichtenfeld
That was not my question. The listed items are not selectable as modules. They can only be compiled into the kernel or turned off. I list them again, they reside in the < QOS and/or fair queueing > section:
[*] QoS support
Only needed if you want to implement QOS support so other devices on the network can send requestst for bandwidth.
Quoted 1 line
[*] Rate estimator
Quoted 8 lines
This can be used for the "Traffic policing" to calculate the rate of the packets.
Quoted 1 line
[*] Traffic policing
This is sort of tbf-in-filter. You can configure a filter to only match packets at a certain rate.
You don't need these options to use SFQ, HTB, fw and/or u32.
Thank you very, very mutch! This is exactly the information I was hoping for.
Greetings, Gundy
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/