Strange thing in HTB classes
Hi,
I've one small question.
Why packets travel through one class when they shouldnt? My configuration follows:
I have ie. one root class and one other class. In the other class I have rateKbit ceilKbit.
I'm using HTB script to launch this. In the other class I have 3 rules:
RULE=my_ip,:1024/0xfc00
RULE=my_ip,:2048/0xfc00
RULE=my_ip,:3072/0xfc00
The root class has all 100Mbit bandwidth.
When I send ping to any computer through my_ip it not going through other class. That is right.
But when I do flood ping i see that something flowing through other class and
transmission stopping for a while. This behaviour like it is limiting to the 10Kbit of the other class and not going through root class. I dont't know why. The more ports I include in the other class the less throughput of flood ping is. But when I set rate0Kbit or more it is going ok but still through
other class. I think that pings should go through root class entirely. When I include only a few ports the flood ping is going ok and nothing go through other class.
I don't know why it is so.
I appreciate for a good answer.
Bartosz Jurasinski
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 18 lines · Bartek
Hi,
I've one small question.
Why packets travel through one class when they shouldnt? My configuration follows:I have ie. one root class and one other class. In the other class I have rate=10Kbit ceil=10Kbit.
I'm using HTB script to launch this. In the other class I have 3 rules:
RULE=my_ip,:1024/0xfc00
RULE=my_ip,:2048/0xfc00
RULE=my_ip,:3072/0xfc00
The root class has all 100Mbit bandwidth.
When I send ping to any computer throughmy_ipit not going through other class. That is right.
But when I do flood ping i see that something flowing through other class and
transmission stopping for a while. This behaviour like it is limiting to
Quoted 8 lines
the 10Kbit of the other class and not going through root class. I dont't know why. The more ports I include in the other class the less throughput of flood ping is. But when I set rate=100Kbit or more it is going ok but still through
other class. I think that pings should go through root class entirely. When I include only a few ports the flood ping is going ok and nothing go through other class.
I don't know why it is so.
When a packet end up in the root class (or a non-leaf class), strange things can happen. In htb3.4 or so, the nic hanged when you put 1 packet in a non-leaf class. Devik fixed it in a later release. You don't know how the
packet is handled. It's better to create an extra class and make it the
default class.
Stef
Signature · 8 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.oftc.net _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/