Lartc & Squid
hi all,
We are using squid 25s1 with kernel 2.4.19 and iproute2(+julian's Pathes) with the following acl..
acl short_path dst 128.0.0.0/8
tcp_outgoing_address myIp2nd short_path
we are linked to 2 isp--one having satelite & the other OFC. We want the above mentioned network to go thru OFC(ispB) as the sibling resides there. But when i use squidclient mgr:server_list command i see that rtt is still 650ms which is the time taken by satelite provider(ispA). The OFC takes 230ms.
On this linux box we have 2 interface linked to different isp & the 3rd serves our local network.. The rules defined are...
50: from NETB lookup ispB 50: from ofiNetA lookup ispB 50: from ofiNetB lookup ispB 75: from NETA lookup ispA 125: from ofiNetC lookup BALANCE 125: from ofiNetD lookup BALANCE 125: from ofiNetE lookup BALANCE 32766: from all lookup main 32767: from all lookup default
the default is defined in default table & is towards ispA & the other routes are, ascan be guessed, according to the providers.
My Question is--
what can be done so that squid uses path according to the interface defined ?
how can local generated packets(on the linux box) uses a path as wanted by us(in the rules) ?
Awaiting a reply/suggestion/experience from you very anxiously..
A.H
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 1 line · Arindam Haldar
hi all,
hi,
Quoted 4 lines
We are using squid 25s1 with kernel 2.4.19 and iproute2(+julian's Pathes) with the following acl..
Quoted 9 lines
acl
short_pathdst 128.0.0.0/8
tcp_outgoing_addressmyIp2ndshort_pathwe are linked to 2 isp--one having satelite & the other OFC. We want the above mentioned network to go thru OFC(ispB) as the sibling resides there. But when i use squidclient mgr:server_list command i see that rtt is still 650ms which is the time taken by satelite provider(ispA). The OFC takes 230ms.
ip rule add prio 50 to 128.0.0.0/8 lookup ispB
should do the trick.
Quoted 3 lines
My Question is--
what can be done so that squid uses path according to the interface defined ?
I'm not sure to understand your question. But if you want all packets sent by squid to use a specific gateway, you need to mark them, and route them according to this.
Eg,
iptables -t mangle -A OUTPUT -m owner --uid-owner squid_uid -j MARK --set-mark 1
Then,
ip rule add prio 50 fwmark 1 lookup ispX
Quoted 3 lines
how can local generated packets(on the linux box) uses a path as wanted by us(in the rules) ?
Same answer, mark them.
iptables -t mangle -A OUTPUT -j MARK --set-mark 2
Then, instruct the kernel to route marked packets through a specific ISP
ip rule add prio 50 fwmark 2 lookup ispX
Quoted 1 line
Awaiting a reply/suggestion/experience from you very anxiously..
Hope this helps.
Cheers,
Vincent.
Quoted 6 lines
A.H
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Signature · 10 lines
Vincent Jaussaud Kelkoo.com Security Manager email: [email protected] "The UNIX philosophy is to design small tools that do one thing, and do it well." _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/