Skip to contentSkip to conversation

Lartc & Squid

LARTC Arindam Haldar 2 participants 2 messages Nov 25, 2002 – Nov 26, 2002

lore
Share & tools
lore
#0 lore raw

hi all,

We are using squid 25s1 with kernel 2.4.19 and iproute2(+julian's Pathes) with the following acl..

acl short_path dst 128.0.0.0/8
tcp_outgoing_address myIp2nd short_path

we are linked to 2 isp--one having satelite & the other OFC. We want the above mentioned network to go thru OFC(ispB) as the sibling resides there. But when i use squidclient mgr:server_list command i see that rtt is still 650ms which is the time taken by satelite provider(ispA). The OFC takes 230ms.

On this linux box we have 2 interface linked to different isp & the 3rd serves our local network.. The rules defined are...

50:     from NETB lookup ispB
50:     from ofiNetA lookup ispB
50:     from ofiNetB lookup ispB
75:     from NETA lookup ispA
125:    from ofiNetC lookup BALANCE
125:    from ofiNetD lookup BALANCE
125:    from ofiNetE lookup BALANCE
32766:  from all lookup main
32767:  from all lookup default

the default is defined in default table & is towards ispA & the other routes are, ascan be guessed, according to the providers.

My Question is--
what can be done so that squid uses path according to the interface defined ?
how can local generated packets(on the linux box) uses a path as wanted by us(in the rules) ?

Awaiting a reply/suggestion/experience from you very anxiously..

A.H

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#1 lore raw
Quoted 1 line · Arindam Haldar

hi all,

hi,

Quoted 4 lines

We are using squid 25s1 with kernel 2.4.19 and iproute2(+julian's Pathes) with the following acl..

Quoted 9 lines

acl short_path dst 128.0.0.0/8
tcp_outgoing_address myIp2nd short_path

we are linked to 2 isp--one having satelite & the other OFC. We want the above mentioned network to go thru OFC(ispB) as the sibling resides there. But when i use squidclient mgr:server_list command i see that rtt is still 650ms which is the time taken by satelite provider(ispA). The OFC takes 230ms.

ip rule add prio 50 to 128.0.0.0/8 lookup ispB
should do the trick.

Quoted 3 lines

My Question is--
what can be done so that squid uses path according to the interface defined ?

I'm not sure to understand your question. But if you want all packets sent by squid to use a specific gateway, you need to mark them, and route them according to this.

Eg,

iptables -t mangle -A OUTPUT -m owner --uid-owner squid_uid -j MARK --set-mark 1

Then,
ip rule add prio 50 fwmark 1 lookup ispX

Quoted 3 lines

how can local generated packets(on the linux box) uses a path as wanted by us(in the rules) ?

Same answer, mark them.

iptables -t mangle -A OUTPUT -j MARK --set-mark 2

Then, instruct the kernel to route marked packets through a specific ISP

ip rule add prio 50 fwmark 2 lookup ispX

Quoted 1 line

Awaiting a reply/suggestion/experience from you very anxiously..

Hope this helps.
Cheers,
Vincent.

Quoted 6 lines

A.H

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

Signature · 10 lines
Vincent Jaussaud
Kelkoo.com Security Manager 
email: [email protected]

"The UNIX philosophy is to design small tools that do one thing, and do
it well."

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/