Skip to contentSkip to conversation

redhat ready for htb?

LARTC James Ma 2 participants 2 messages Dec 6, 2002

lore
Share & tools
lore

James Ma

author
#0 lore raw

Hi, All,

I want to use linux (redhat) to do some bandwidth shaping work. I did know something on HTB and IPtables but I have very limited knowledge on Linux itself. I was told it's hard for non linux expert to patch the kernel or even ptach HTB into IPROUTE2. So I would like to know if there is Redhat version with IPROUTE2 and HTB ready, then I don't need to do any patch work? Or if it's not available now, I know kernel 2.4.20 has HTB support, but how to patch HTB into IProute2?

Thanks,

James

#1 lore raw
Quoted 9 lines · James Ma

Hi, All,

I want to use linux (redhat) to do some bandwidth shaping work. I did know something on HTB and IPtables but I have very limited knowledge on Linux itself. I was told it's hard for non linux expert to patch the kernel or even ptach HTB into IPROUTE2. So I would like to know if there is Redhat version with IPROUTE2 and HTB ready, then I don't need to do any patch work? Or if it's not available now, I know kernel 2.4.20 has HTB support, but how to patch HTB into IProute2?

The RH kernel has htb support. But they forget to patch the tc command. You can download a tc binary with htb support from www.docum.org on the faq page. Or the one you can find on the homepage of htb.

Stef

Signature · 8 lines
[email protected]
 "Using Linux as bandwidth manager"
     http://www.docum.org/
     #lartc @ irc.oftc.net

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/