Skip to contentSkip to conversation

3c905 or intel with 82550 chip? for htb + bridge + (u32 & fw filters)

LARTC Victor Cassar 3 participants 5 messages Jan 2, 2003 – Jan 3, 2003

lore
Share & tools
lore
#0 lore raw

Hi:

finally i´m working with htb + bridge on 2.4.20 to shape ip traffic, and i want to build a system but i´m not up2date with these specific driver issues

mi primary need is to shape small bandwidths 128 or 256

are there any diferences between these 2 options? Since i need more granularity in the queuing behavior..i dont know how relevant this decision can be..

thanks in advance for your coments

__________________________________________________
Do you Yahoo!?
Yahoo! Mail Plus - Powerful. Affordable. Sign up now.
http://mailplus.yahoo.com
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#1 lore raw
Quoted 6 lines · Victor Cassar

Hi:

finally i´m working with htb + bridge on 2.4.20 to shape ip traffic, and i want to build a system but i´m not up2date with these specific driver issues

Quoted 7 lines

mi primary need is to shape small bandwidths 128 or 256

are there any diferences between these 2 options? Since i need more granularity in the queuing behavior..i dont know how relevant this decision can be..

The chip doesn't mather. All shaping is done in the kernel so in software.

Stef

Signature · 8 lines
[email protected]
 "Using Linux as bandwidth manager"
     http://www.docum.org/
     #lartc @ irc.oftc.net

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
#2 lore raw

Re: [LARTC] 3c905 or intel with 82550 chip? for htb + bridge +

In reply to Victor Cassar
Quoted 3 lines · Stef Coene

The chip doesn't mather. All shaping is done in the kernel so in software.

With that said, I use and recommend Intel nics. I used to use some 3com ones, but they were crap.

I personally like the 82557-9, mostly the 9's since they are tiny.

But basically any Intel card that is supported by the e100 driver. The e100 driver for Intel cards is my favorite. Intel is always releasing new versions. Not to mention the IANS software that is also available.

My two cents, Intel all the way.

Signature · 13 lines
Sincerely,
William L. Thomson Jr.
Support Group
Obsidian-Studios Inc.
439 Amber Way
Petaluma, Ca. 94952
Phone  707.766.9509
Fax    707.766.8989
http://www.obsidian-studios.com

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
#3 lore raw
In reply to Victor Cassar

Yea my gut want intels i´m just making sure...

some times i read diferent things in linux or bsd routing projects about that some cards being better than others, issues about the tulip chip (dec), 3coms, etc

and since i had some problems in the past with earlier version of 2.x having multiple 3c905, i´m asking know

agree with you and thanks for the reply

--- "William L. Thomson Jr."

Quoted 13 lines · <[email protected]> wrote:
Quoted 2 lines · Stef Coene

The chip doesn't mather. All shaping is done in

the kernel so in software.

Quoted 1 line

With that said, I use and recommend Intel nics. I
used to use some 3com
ones, but they were crap.

I personally like the 82557-9, mostly the 9's since they are tiny.

Quoted 23 lines

But basically any Intel card that is supported by the e100 driver. The
e100 driver for Intel cards is my favorite. Intel is always releasing
new versions. Not to mention the IANS software that is also available.

My two cents, Intel all the way.

Signature · 13 lines
Sincerely,
William L. Thomson Jr.
Support Group
Obsidian-Studios Inc.
439 Amber Way
Petaluma, Ca. 94952
Phone  707.766.9509
Fax    707.766.8989
http://www.obsidian-studios.com

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO:

http://lartc.org/

__________________________________________________
Do you Yahoo!?
Yahoo! Mail Plus - Powerful. Affordable. Sign up now.
http://mailplus.yahoo.com
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#4 lore raw
In reply to Victor Cassar

thanks for the comments, sound interesting...

i´m working with intel & realtek

btw ¿how can i monitor these interrupt load ?

as far s i know the interrupt load is the mayor
concern on a tipical intel/unix router
regars

Quoted 10 lines · --- Aaron Dummer

Victor,

We have had bad experiences with the 3c905. Under heavy traffic the cards
run out of interrupts and go down for about 2 minutes. This may be due to a poor-performing card or just a not-well-coded driver, but either way it is
still risky to use them.

Quoted 8 lines

The Intel Pro 100 cards have worked seamlessly for us.

Aaron Dummer
[email protected]

__________________________________________________
Do you Yahoo!?
Yahoo! Mail Plus - Powerful. Affordable. Sign up now.
http://mailplus.yahoo.com
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/