3c905 or intel with 82550 chip? for htb + bridge + (u32 & fw filters)
Hi:
finally i´m working with htb + bridge on 2.4.20 to shape ip traffic, and i want to build a system but i´m not up2date with these specific driver issues
mi primary need is to shape small bandwidths 128 or 256
are there any diferences between these 2 options? Since i need more granularity in the queuing behavior..i dont know how relevant this decision can be..
thanks in advance for your coments
__________________________________________________
Do you Yahoo!?
Yahoo! Mail Plus - Powerful. Affordable. Sign up now.
http://mailplus.yahoo.com
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 6 lines · Victor Cassar
Hi:
finally i´m working with htb + bridge on 2.4.20 to shape ip traffic, and i want to build a system but i´m not up2date with these specific driver issues
Quoted 7 lines
mi primary need is to shape small bandwidths 128 or 256
are there any diferences between these 2 options? Since i need more granularity in the queuing behavior..i dont know how relevant this decision can be..
The chip doesn't mather. All shaping is done in the kernel so in software.
Stef
Signature · 8 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.oftc.net _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Re: [LARTC] 3c905 or intel with 82550 chip? for htb + bridge +
In reply to Victor CassarQuoted 3 lines · Stef Coene
The chip doesn't mather. All shaping is done in the kernel so in software.
With that said, I use and recommend Intel nics. I used to use some 3com ones, but they were crap.
I personally like the 82557-9, mostly the 9's since they are tiny.
But basically any Intel card that is supported by the e100 driver. The e100 driver for Intel cards is my favorite. Intel is always releasing new versions. Not to mention the IANS software that is also available.
My two cents, Intel all the way.
Signature · 13 lines
Sincerely, William L. Thomson Jr. Support Group Obsidian-Studios Inc. 439 Amber Way Petaluma, Ca. 94952 Phone 707.766.9509 Fax 707.766.8989 http://www.obsidian-studios.com _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Yea my gut want intels i´m just making sure...
some times i read diferent things in linux or bsd routing projects about that some cards being better than others, issues about the tulip chip (dec), 3coms, etc
and since i had some problems in the past with earlier version of 2.x having multiple 3c905, i´m asking know
agree with you and thanks for the reply
--- "William L. Thomson Jr."
Quoted 13 lines · <[email protected]> wrote:
Quoted 2 lines · Stef Coene
The chip doesn't mather. All shaping is done in
the kernel so in software.
Quoted 1 line
With that said, I use and recommend Intel nics. I
used to use some 3com
ones, but they were crap.I personally like the 82557-9, mostly the 9's since they are tiny.
Quoted 23 lines
But basically any Intel card that is supported by the e100 driver. The
e100 driver for Intel cards is my favorite. Intel is always releasing
new versions. Not to mention the IANS software that is also available.My two cents, Intel all the way.
Signature · 13 lines
Sincerely, William L. Thomson Jr. Support Group Obsidian-Studios Inc. 439 Amber Way Petaluma, Ca. 94952 Phone 707.766.9509 Fax 707.766.8989 http://www.obsidian-studios.com _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO:
__________________________________________________
Do you Yahoo!?
Yahoo! Mail Plus - Powerful. Affordable. Sign up now.
http://mailplus.yahoo.com
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
thanks for the comments, sound interesting...
i´m working with intel & realtek
btw ¿how can i monitor these interrupt load ?
as far s i know the interrupt load is the mayor
concern on a tipical intel/unix router
regars
Quoted 10 lines · --- Aaron Dummer
Victor,
We have had bad experiences with the 3c905. Under heavy traffic the cards
run out of interrupts and go down for about 2 minutes. This may be due to a poor-performing card or just a not-well-coded driver, but either way it is
still risky to use them.
Quoted 8 lines
The Intel Pro 100 cards have worked seamlessly for us.
Aaron Dummer
[email protected]
__________________________________________________
Do you Yahoo!?
Yahoo! Mail Plus - Powerful. Affordable. Sign up now.
http://mailplus.yahoo.com
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/