Skip to contentSkip to conversation

Shaping and PPPoE

LARTC Lars Gaarden 1 participant 1 message Jan 30, 2003

lore
Share & tools
lore
#0 lore raw

It seems like this scenario isn't covered in any faq:

I have a PPPoE server running on eth1, and want to control outgoing traffic to users connecting through PPPoE.

Internet --- eth0 - eth1 --- users over PPPoE

                     ppp0
                     ppp1
                     ppp..

Each user is assigned a static address (i.e., user1 is always 10.1.1.1). However, the pppx devices are assigned dynamically based on the order they connect (if user3 connects first, he gets ppp0).

Should I configure shaping rules (based on IP addresses) on eth1, or do I have to write a script that is watching the PPPoE logs, figure out which user is which pppx and add rules to each pppx accordingly? That is, can I shape on IP on eth1 when I am using PPPoE, or do I have to shape on each virtual ppp device?

Signature · 5 lines
LarsG

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/