Skip to contentSkip to conversation

CBQ-Statistics-?

LARTC Srikanth 2 participants 2 messages May 15, 2003

lore
Share & tools
lore

Srikanth

author
#0 lore raw

Hi all,

For simple CBQ configuration, it's showing the stats as below.

### eth0: queueing disciplines

qdisc cbq # 1:

rate = 10Mbit
(bounded, isolated)
prio no-transmit

### eth0: traffic classes

class cbq # 1: root

rate = 10Mbit
(bounded, isolated)
prio no-transmit

If the Interface ROOT qdisc/class is ISOLATED, then how it will lend it's unused Bandwidth to it's children,

C'd anybody help me please.

regards,
Srikanth.

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#1 lore raw
Quoted 17 lines · Srikanth

Hi all,

For simple CBQ configuration, it's showing the stats as below.

### eth0: queueing disciplines

qdisc cbq # 1:

rate = 10Mbit
(bounded, isolated)
prio no-transmit

### eth0: traffic classes

class cbq # 1: root

Quoted 8 lines

rate = 10Mbit
(bounded, isolated)
prio no-transmit

If the Interface ROOT qdisc/class is ISOLATED, then how it will lend it's unused Bandwidth to it's children,

C'd anybody help me please.

Forget isolated. It's not working. It can even disturb the cbq setup. I did some test for it (I don't know the exact page but you can find it on www.doucm.org).

Stef

Signature · 8 lines
[email protected]
 "Using Linux as bandwidth manager"
     http://www.docum.org/
     #lartc @ irc.oftc.net

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/