CBQ-Statistics-?
Hi all,
For simple CBQ configuration, it's showing the stats as below.
### eth0: queueing disciplines
qdisc cbq # 1:
rate = 10Mbit
(bounded, isolated)
prio no-transmit
### eth0: traffic classes
class cbq # 1: root
rate = 10Mbit
(bounded, isolated)
prio no-transmit
If the Interface ROOT qdisc/class is ISOLATED, then how it will lend it's unused Bandwidth to it's children,
C'd anybody help me please.
regards,
Srikanth.
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 17 lines · Srikanth
Hi all,
For simple CBQ configuration, it's showing the stats as below.
### eth0: queueing disciplines
qdisc cbq # 1:
rate = 10Mbit
(bounded, isolated)
prio no-transmit### eth0: traffic classes
class cbq # 1: root
Quoted 8 lines
rate = 10Mbit
(bounded, isolated)
prio no-transmitIf the Interface ROOT qdisc/class is ISOLATED, then how it will lend it's unused Bandwidth to it's children,
C'd anybody help me please.
Forget isolated. It's not working. It can even disturb the cbq setup. I did some test for it (I don't know the exact page but you can find it on www.doucm.org).
Stef
Signature · 8 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.oftc.net _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/