Rate & Ceil
Quoted 6 lines · Daniel Ortiz
Hi, I have a little problem with tc.
That's my cfg:/*****************************************/
#!/bin/bash
Quoted 7 lines
DEV="dev eth0"
tc qdisc del $DEV root
tc qdisc add $DEV root handle 1: htb default 1
tc class add $DEV parent 1: classid 1:1 htb rate 100kbit ceil 100kbps
kbit? Shouldn't that be 100kbps ??
Quoted 16 lines
tc class add $DEV parent 1:1 classid 1:10 htb rate 40kbps ceil 100kbps tc class add $DEV parent 1:1 classid 1:11 htb rate 30kbps ceil 100kbps tc class add $DEV parent 1:1 classid 1:12 htb rate 30kbps ceil 100kbps tc qdisc add $DEV parent 1:10 handle 10: sfq
tc qdisc add $DEV parent 1:11 handle 11: sfq
tc qdisc add $DEV parent 1:12 handle 12: sfq
tc filter add $DEV protocol ip parent 1:0 prio 1 handle 1 fw flowid 1:10 tc filter add $DEV protocol ip parent 1:0 prio 3 handle 2 fw flowid 1:11 tc filter add $DEV protocol ip parent 1:0 prio 1 handle 3 fw flowid 1:12 iptables -A PREROUTING -t mangle -j MARK -p icmp --set-mark 1 iptables -A OUTPUT -t mangle -j MARK -p icmp --set-mark 1 iptables -A PREROUTING -t mangle -j MARK -p tcp --set-mark 2 iptables -A OUTPUT -t mangle -j MARK -p tcp --set-mark 2 iptables -A OUTPUT -t mangle -j MARK -p tcp --sport 22 --set-mark 3 iptables -A PREROUTING -t mangle -j MARK -p tcp --sport 22 --set-mark 3
Quoted 6 lines
/*************************************/
All works correctly and the packets pass in his own class and filter, but an ftp connection (mark 2 --> 1:11 , 30kbps rate --> 100kbps ceil) only get 30kbps,
Why, if the bw is alvailable, don't get all the bw?
Normally it should. But you made a type (see the line where you add class 1:1 and my reply).
Stef
Signature · 8 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.oftc.net _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Hi, I have a little problem with tc.
That's my cfg:
/*****************************************/
#!/bin/bash
DEV="dev eth0"
tc qdisc del $DEV root
tc qdisc add $DEV root handle 1: htb default 1
tc class add $DEV parent 1: classid 1:1 htb rate 100kbit ceil 100kbps
tc class add $DEV parent 1:1 classid 1:10 htb rate 40kbps ceil 100kbps
tc class add $DEV parent 1:1 classid 1:11 htb rate 30kbps ceil 100kbps
tc class add $DEV parent 1:1 classid 1:12 htb rate 30kbps ceil 100kbps
tc qdisc add $DEV parent 1:10 handle 10: sfq
tc qdisc add $DEV parent 1:11 handle 11: sfq
tc qdisc add $DEV parent 1:12 handle 12: sfq
tc filter add $DEV protocol ip parent 1:0 prio 1 handle 1 fw flowid 1:10
tc filter add $DEV protocol ip parent 1:0 prio 3 handle 2 fw flowid 1:11
tc filter add $DEV protocol ip parent 1:0 prio 1 handle 3 fw flowid 1:12
iptables -A PREROUTING -t mangle -j MARK -p icmp --set-mark 1
iptables -A OUTPUT -t mangle -j MARK -p icmp --set-mark 1
iptables -A PREROUTING -t mangle -j MARK -p tcp --set-mark 2
iptables -A OUTPUT -t mangle -j MARK -p tcp --set-mark 2
iptables -A OUTPUT -t mangle -j MARK -p tcp --sport 22 --set-mark 3
iptables -A PREROUTING -t mangle -j MARK -p tcp --sport 22 --set-mark 3
/*************************************/
All works correctly and the packets pass in his own class and filter, but an ftp connection (mark 2 --> 1:11 , 30kbps rate --> 100kbps ceil) only get 30kbps,
Why, if the bw is alvailable, don't get all the bw?
Thx.
Signature · 11 lines
BSD ownz me -- Daniel Ortiz [email protected] ILIMIT Comunicacions Departament Sistemes http://www.ilimit.es Tel: (+34) 93 733 33 75 Fax: (+34) 93 733 32 43