Skip to contentSkip to conversation

Rate & Ceil

LARTC Stef Coene 2 participants 2 messages May 27, 2003

lore
Share & tools
lore

Stef Coene

author
#0 lore raw
Quoted 6 lines · Daniel Ortiz

Hi, I have a little problem with tc.
That's my cfg:

/*****************************************/
#!/bin/bash

Quoted 7 lines

DEV="dev eth0"

tc qdisc del $DEV root

tc qdisc add $DEV root handle 1: htb default 1

tc class add $DEV parent 1: classid 1:1 htb rate 100kbit ceil 100kbps

kbit? Shouldn't that be 100kbps ??

Quoted 16 lines

tc class add $DEV parent 1:1 classid 1:10 htb rate 40kbps ceil 100kbps tc class add $DEV parent 1:1 classid 1:11 htb rate 30kbps ceil 100kbps tc class add $DEV parent 1:1 classid 1:12 htb rate 30kbps ceil 100kbps tc qdisc add $DEV parent 1:10 handle 10: sfq
tc qdisc add $DEV parent 1:11 handle 11: sfq
tc qdisc add $DEV parent 1:12 handle 12: sfq
tc filter add $DEV protocol ip parent 1:0 prio 1 handle 1 fw flowid 1:10 tc filter add $DEV protocol ip parent 1:0 prio 3 handle 2 fw flowid 1:11 tc filter add $DEV protocol ip parent 1:0 prio 1 handle 3 fw flowid 1:12 iptables -A PREROUTING -t mangle -j MARK -p icmp --set-mark 1 iptables -A OUTPUT -t mangle -j MARK -p icmp --set-mark 1 iptables -A PREROUTING -t mangle -j MARK -p tcp --set-mark 2 iptables -A OUTPUT -t mangle -j MARK -p tcp --set-mark 2 iptables -A OUTPUT -t mangle -j MARK -p tcp --sport 22 --set-mark 3 iptables -A PREROUTING -t mangle -j MARK -p tcp --sport 22 --set-mark 3

Quoted 6 lines

/*************************************/

All works correctly and the packets pass in his own class and filter, but an ftp connection (mark 2 --> 1:11 , 30kbps rate --> 100kbps ceil) only get 30kbps,
Why, if the bw is alvailable, don't get all the bw?

Normally it should. But you made a type (see the line where you add class 1:1 and my reply).

Stef

Signature · 8 lines
[email protected]
 "Using Linux as bandwidth manager"
     http://www.docum.org/
     #lartc @ irc.oftc.net

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
#1 lore raw

Hi, I have a little problem with tc.
That's my cfg:

/*****************************************/
#!/bin/bash

DEV="dev eth0"

tc qdisc del $DEV root

tc qdisc add $DEV root handle 1: htb default 1

tc class add $DEV parent 1: classid 1:1 htb rate 100kbit ceil 100kbps

tc class add $DEV parent 1:1 classid 1:10 htb rate 40kbps ceil 100kbps

tc class add $DEV parent 1:1 classid 1:11 htb rate 30kbps ceil 100kbps

tc class add $DEV parent 1:1 classid 1:12 htb rate 30kbps ceil 100kbps

tc qdisc add $DEV parent 1:10 handle 10: sfq

tc qdisc add $DEV parent 1:11 handle 11: sfq

tc qdisc add $DEV parent 1:12 handle 12: sfq

tc filter add $DEV protocol ip parent 1:0 prio 1 handle 1 fw flowid 1:10

tc filter add $DEV protocol ip parent 1:0 prio 3 handle 2 fw flowid 1:11

tc filter add $DEV protocol ip parent 1:0 prio 1 handle 3 fw flowid 1:12

iptables -A PREROUTING -t mangle -j MARK -p icmp --set-mark 1

iptables -A OUTPUT -t mangle -j MARK -p icmp --set-mark 1

iptables -A PREROUTING -t mangle -j MARK -p tcp --set-mark 2

iptables -A OUTPUT -t mangle -j MARK -p tcp --set-mark 2

iptables -A OUTPUT -t mangle -j MARK -p tcp --sport 22 --set-mark 3

iptables -A PREROUTING -t mangle -j MARK -p tcp --sport 22 --set-mark 3

/*************************************/

All works correctly and the packets pass in his own class and filter, but an ftp connection (mark 2 --> 1:11 , 30kbps rate --> 100kbps ceil) only get 30kbps,
Why, if the bw is alvailable, don't get all the bw?

Thx.

Signature · 11 lines
BSD ownz me
--

Daniel Ortiz
[email protected]

ILIMIT Comunicacions
Departament Sistemes
http://www.ilimit.es
Tel: (+34) 93 733 33 75
Fax: (+34) 93 733 32 43