prio error
I would appreciate any suggestions on the following error. The configuration script used to configure prio on a wireless interface is the following
#####################################
tc qdisc del dev wlan0 root
tc qdisc add dev wlan0 root handle 1: prio
We get the following error message:
RTNETLINK :Invalid argument
:Command not found
Any help will be appreciated.
Thanks.
Bibb Cain
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 9 lines · Joseph
I would appreciate any suggestions on the following error. The configuration script used to configure prio on a wireless interface is the following
#####################################
tc qdisc del dev wlan0 root
tc qdisc add dev wlan0 root handle 1: prio
Quoted 7 lines
We get the following error message:
RTNETLINK :Invalid argument
:Command not found
Any help will be appreciated.
You need the tc binary that can be found in the iproute2+tc package.
Stef
Signature · 8 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.oftc.net _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Thanks Stef. I'm a little confused now as to whether we have all of the needed files. We are running Redhat 8.0 includes the iproute-2.4.7-5 package. We complied the kernal with all of the QoS switches enabled. I cannot determine if Redhat 8.0 includes the required iproute2+tc package. By searching some web sites we find a tar file with iproute2-2.4.7-now-ss020116-try.tar.gz.
Is this already in Redhat 8.0 or do we
need to include this also (also is this
the latest version).
Thanks for the help.
Bibb Cain
-----Original Message-----
From: Stef Coene [mailto:[email protected]]
Sent: Thursday, June 12, 2003 3:36 PM
To: Cain, Joseph; Lartc (E-mail)
Cc: Cain, Joseph
Subject: Re: [LARTC] prio error
Quoted 9 lines · Joseph
I would appreciate any suggestions on the following error. The configuration script used to configure prio on a wireless interface is the following
#####################################
tc qdisc del dev wlan0 root
tc qdisc add dev wlan0 root handle 1: prio
Quoted 7 lines
We get the following error message:
RTNETLINK :Invalid argument
:Command not found
Any help will be appreciated.
You need the tc binary that can be found in the iproute2+tc package.
Stef
Signature · 7 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.oftc.net _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 11 lines · Joseph
Thanks Stef. I'm a little confused now as to whether we have all of the needed files. We are running Redhat 8.0 includes the iproute-2.4.7-5 package. We complied the kernal with all of the QoS switches enabled. I cannot determine if Redhat 8.0 includes the required iproute2+tc package. By searching some web sites we find a tar file with iproute2-2.4.7-now-ss020116-try.tar.gz.
Is this already in Redhat 8.0 or do we
need to include this also (also is this
the latest version).
I never use RH, but it's best if you compile the tc and ip binary you can find in that iproute tar.gz package.
Stef
Signature · 8 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.oftc.net _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/