Skip to contentSkip to conversation

prio error

LARTC Cain, Joseph 2 participants 4 messages Jun 12, 2003

lore
Share & tools
lore
#0 lore raw

I would appreciate any suggestions on the following error. The configuration script used to configure prio on a wireless interface is the following

#####################################
tc qdisc del dev wlan0 root
tc qdisc add dev wlan0 root handle 1: prio

We get the following error message:

RTNETLINK :Invalid argument
:Command not found

Any help will be appreciated.
Thanks.

Bibb Cain
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#1 lore raw
Quoted 9 lines · Joseph

I would appreciate any suggestions on the following error. The configuration script used to configure prio on a wireless interface is the following

#####################################
tc qdisc del dev wlan0 root
tc qdisc add dev wlan0 root handle 1: prio

Quoted 7 lines

We get the following error message:

RTNETLINK :Invalid argument

:Command not found

Any help will be appreciated.

You need the tc binary that can be found in the iproute2+tc package.

Stef

Signature · 8 lines
[email protected]
 "Using Linux as bandwidth manager"
     http://www.docum.org/
     #lartc @ irc.oftc.net

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
#2 lore raw
In reply to Cain, Joseph

Thanks Stef. I'm a little confused now as to whether we have all of the needed files. We are running Redhat 8.0 includes the iproute-2.4.7-5 package. We complied the kernal with all of the QoS switches enabled. I cannot determine if Redhat 8.0 includes the required iproute2+tc package. By searching some web sites we find a tar file with iproute2-2.4.7-now-ss020116-try.tar.gz.
Is this already in Redhat 8.0 or do we
need to include this also (also is this
the latest version).

Thanks for the help.

Bibb Cain

-----Original Message-----
From: Stef Coene [mailto:[email protected]]
Sent: Thursday, June 12, 2003 3:36 PM
To: Cain, Joseph; Lartc (E-mail)
Cc: Cain, Joseph
Subject: Re: [LARTC] prio error

Quoted 9 lines · Joseph

I would appreciate any suggestions on the following error. The configuration script used to configure prio on a wireless interface is the following

#####################################
tc qdisc del dev wlan0 root
tc qdisc add dev wlan0 root handle 1: prio

Quoted 7 lines

We get the following error message:

RTNETLINK :Invalid argument

:Command not found

Any help will be appreciated.

You need the tc binary that can be found in the iproute2+tc package.

Stef

Signature · 7 lines
[email protected]
 "Using Linux as bandwidth manager"
     http://www.docum.org/
     #lartc @ irc.oftc.net
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
#3 lore raw
In reply to Cain, Joseph
Quoted 11 lines · Joseph

Thanks Stef. I'm a little confused now as to whether we have all of the needed files. We are running Redhat 8.0 includes the iproute-2.4.7-5 package. We complied the kernal with all of the QoS switches enabled. I cannot determine if Redhat 8.0 includes the required iproute2+tc package. By searching some web sites we find a tar file with iproute2-2.4.7-now-ss020116-try.tar.gz.
Is this already in Redhat 8.0 or do we
need to include this also (also is this
the latest version).

I never use RH, but it's best if you compile the tc and ip binary you can find in that iproute tar.gz package.

Stef

Signature · 8 lines
[email protected]
 "Using Linux as bandwidth manager"
     http://www.docum.org/
     #lartc @ irc.oftc.net

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/