WonderShaper on spesific ports?
Hi!
I've just tried out this program and it works amazingly, throttling uploads at whatever speed I like it to. It works great for what I want it for, throttling emule which has a tendency to hose the entire network and grinding everything to a halt, but it also limits all other uploads, so vnc is now impossible. This is of course very unfortunate, so I was wondering if there is a way to limit uploads speeds on only certain ports so I could limit only p2p programs from going overboard and let the rest of the computer continue uploading at full bandwith.
- Wizzcat
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Wizzcat wrote:
--snip---
Quoted 3 lines
wondering if there is a way to limit uploads speeds on only certain ports so I could limit only p2p programs from going overboard and let the rest of the computer continue uploading at full bandwith.
it should be fairly simple
the emule ports are listed here:
http://www.emule-project.net/faq/ports.htm
and in the top of the wondershaper script, it allows you to enter
# low priority source ports NOPRIOPORTSRC # low priority destination ports NOPRIOPORTDST
Signature · 10 lines
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Damion de Soto - Software Engineer email: [email protected] SnapGear --- ph: +61 7 3435 2809 | Custom Embedded Solutions fax: +61 7 3891 3630 | and Security Appliances web: http://www.snapgear.com ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 10 lines · Wizzcat
Hi!
I've just tried out this program and it works amazingly, throttling uploads at whatever speed I like it to. It works great for what I want it for, throttling emule which has a tendency to hose the entire network and grinding everything to a halt, but it also limits all other uploads, so vnc is now impossible. This is of course very unfortunate, so I was wondering if there is a way to limit uploads speeds on only certain ports so I could limit only p2p programs from going overboard and let the rest of the computer continue uploading at full bandwith.
Yes it can done. But I don't know the WonderShaper configuration. But it's not so difficult to adapt the wondershaper if you read the docs on lartc.org and docum.org.
Stef
Signature · 8 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.oftc.net _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/